| Age | Commit message (Collapse) | Author |
|---|
|
Use kB instead of MB for the partition size to get a better granularity.
This is needed on some SoC (i.mx, omap) where it is necessary to create
partitions as small as 64kB.
Keep the backward compatibility by assuming MB when no unit is provided.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Tested-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add a new terminal type that makes a new window in the running tmux
session instead of splitting the window. 80x25 is not enough to run
menuconfig inside a split window, so add the option to create a new
window instead.
Use the new window option by default when the split window would be
less than 19 lines high.
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If maillock.h is found, a dependency on liblockfile will be created.
liblockfile is in meta-oe, so we don't want that in an oe-core recipe.
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The named release was still using the -dev git repo which did not contain
the SRCREV referenced in the numbered/named version.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It turns out that changing WARN_QA and ERROR_QA results in do_configure's QA
postfunc re-executing, so changing a QA test results in a complete rebuild.
This is just too much and the lesser evil of needing to do a full rebuild to
verify changed QA flags is preferable to an enforced full rebuild.
This reverts commit daecfc3438122b5d146a59a5053e57006d55ccc4.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Checks in FILES and pkg_* variables, solves common mistake of
using ${D} instead of $D and warns the user accordingly.
[YOCTO #6642]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
environment setup file
When specify a target sdk dir that contains default install dir as
subdir,
target_sdk_dir=/opt/poky/$version/
custom_target_sdk_dir=/opt/poky/$version/some
The target_sdk_dir variable in environment-setup file is replaced twice
causes to point to wrong PATH.
In order to fix filter environment-setup file in second replacement.
[YOCTO #7032]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
flags for EGL and GBM Gallium had been removed in 10.4,
so remove these flags, files or packages.
Signed-off-by: Pengyu Ma <pengyu.ma@windriver.com>
Tested-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Kickstart file errors are not emitted by the parser. In case errors, the
current code will continue to execute possibly creating a faulty or
incomplete image. The patch enables the parser to emit all encountered
errors. The error message is shown for the user and further execution is
ceased.
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Re-introduce
https://sourceware.org/git/?p=glibc.git;a=commit;h=fdbe8eae2b9aed74dabba1b0a189c5d7d61bf032
This patch was overzealously removed during option groups forward port
Change-Id: I8dd01902ae8e5ee8b5c6fc9dc39c7216952dca51
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
BUILDNAME is set by cooker as a string of current time. Letting do_rootfs
task depend on this variable gets us no benefit. Besides, letting do_rootfs
task depend on this variable will cause us trouble when executing
`bitbake -S none core-image-minimal'. With current code, this command
gives us error complaining about the different bashhash of do_rootfs task.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Split the debug-tweaks into a more fine tunable set of IMAGE_FEATURES
which activate the component functions.
Clean-up image-core and image bbclass by having the ROOTFS_POSTPROCESS_COMMANDs
in in one place for the debug-tweaks related functions
[YOCTO #5344]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Rebase default-sysroot patch
Remove backported Mozilla certdata patch
License has not changed, just wording.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Strictly speaking not all of these characters are operators, so reword
the message to describe them as separators. Also use the standard
"recipename: message" format.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The ">" should be ">>".
We had got something like the following in pcap-config:
echo '--should-not-have-used-/usr/bin/pcap-config'
exit 1
(Lacks of #!/bin/sh)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
It is not needed any more since sed-native had been dropped.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
Fixed:
drd/tests/boost_thread.cpp:5:38: fatal error: boost/thread/condition.hpp: No such file or directory
#include <boost/thread/condition.hpp>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
This adds 'nativesdk' in the BBCLASSEXTEND.
Building apr-util for the SDK requires that some paths in the rules.mk
file are fixed to point to the actual enviroment. These include pointing
the apr configuration variables to the actual apr builddir and
correcting the name of the libtool.
Signed-off-by: Timo Mueller <timo.mueller@bmw-carit.de>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The patch fixes an issue in laying out extended and logical partitions
by wic. The original code produced disk images in which the size 3rd
partition as described in MBR was incorrect. Depending on the type of
file system used for that partition and size of the partition, it would
be impossible to mount the partition correctly. For instance, kickstart
file in which the 3rd partition had size of 1GB and used ext4 fs, would
result in an image with an umountable partition. The root cause is
reservation of sectors for EBR through stealing of last sector from the
last primary partition.
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This adds support to build multiple U-Boot configs for a machine; this
is useful when we have support for different media boots which require
different U-Boot configuration (e.g: eMMC and NAND).
Below there's an usage example:
,----[ i.MX6Q SABRE AUTO based example ]
| UBOOT_CONFIG ??= "sd eimnor nand spinor"
| UBOOT_CONFIG[sd] = "mx6qsabreauto_config,sdcard"
| UBOOT_CONFIG[eimnor] = "mx6qsabreauto_eimnor_config"
| UBOOT_CONFIG[nand] = "mx6qsabreauto_nand_config,ubifs"
| UBOOT_CONFIG[spinor] = "mx6qsabreauto_spinor_config"
`----
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The libtool would be very slow if run "automake/autoconf --version", for
example, when compile xz-native (make -j1, only compile, no confiure or
install):
before patched: 19s
after patched: 11s
Use plain text to instead of running them.
NOTE: it is still a little slower than libtool 2.4.2 when compile
xz-native because of other parts:
make -j1: about 2s slower
make -j32: about 0.4s slower
If we run to do_install:
(PARALLEL_MAKE = "-j32")
libtool 2.4.2:
$ bitbake xz-native -cinstall && bitbake xz-native -ccleansstate && time bitbake xz-native -cinstall
real 0m21.092s
user 0m28.292s
sys 0m3.932s
libtool 2.4.5:
$ bitbake xz-native -cinstall && bitbake xz-native -ccleansstate && time bitbake xz-native -cinstall
real 0m21.380s
user 0m31.140s
sys 0m4.068s
About 0.3s, slightly different.
But when using /bin/bash as CONFIG_SHELL, the new libtool would be much slower:
real 0m23.106s
user 0m44.044s
sys 0m4.280s
About 2s slower, for the big package like cairo, it is more slower (about 6s),
unfortunately, /bin/bash is most default CONFIG_SHELL for the recipes since
configure checks first check bash.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This recipe wraps package and package feed verification keys into a package,
making the management and deployment of verification keys much easier. Comments
on how to select keys for inclusion in this package are provided in the recipe
file.
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
|
|
The improvements to opkg-key made for v0.3.0 are backported. The rest of v0.3.0
needs further testing and bugfixing prior to release, but the improvements to
opkg-key have been tested and work well.
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
|
|
This recipe was not usable as-is. A much better way of configuring package feeds
for opkg is provided by the distro-feed-config recipe in meta-oe.
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
|
|
All non-arch-specific and non-distro-specific configuration is now kept in the
main 'opkg' recipe and package.
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
|
|
There is no benefit to having a separate .inc file when we only support one
version of opkg.
The .inc file had multiple do_install_append functions and several variables
were defined out of the usual order. This arrangement should be better.
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
|
|
Instead of having the source files 'opkg.conf.comments', 'dest' and 'src', we
simply have one 'opkg.conf' file containing all the necessary configuration.
This does mean that replacing 'src' in a bbappend to define distro-specific
package feeds is no longer supported, but these feed configurations should be
packaged separately from the rest of the opkg configuration anyway so that
things can be updated independently. The best recipe to use for managing feed
configs is currently distro-feed-config in the meta-oe layer.
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
|
|
The name 'opkg-arch-config' is much more descriptive.
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
|
|
This adds 'nativesdk' in the BBCLASSEXTEND.
Signed-off-by: Timo Mueller <timo.mueller@bmw-carit.de>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The unknown-configure-option check is generally useful and should be enabled by
default.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Changing WARN_QA and ERROR_QA should cause do_package_qa to re-execute, so
removing them from the sstate hashes is harmful.
They were added back when sanity testing was part of packaging and this was the
lesser evil, compared to changing sanity tests causing a re-package of
everything.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If a recipe (say, wayland) has DEPENDS=wayland-native and BBCLASSEXTEND=native,
when built as wayland-native it has DEPENDS=wayland-native which results in a
circular dependency.
Typically this is resolved by having explicit DEPENDS_class-native statements
but as this is duplication which can lead to inconsistent dependencies,
automatically remove the circular dependency.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fix systemd-timesyncd assertion
when networkd is disabled then we now do not
create /run/systemd/netif/links but timesyncd needs it. So lets
manually create this file when networkd is disabled so timesyncd
can still function
When enabling systemd-timesyncd we need systemd-timesync user
Backport patches to enable timesyncd when resolved and networkd
are disabled
replace the resolv.conf symlinink patch with a proper backport
Change-Id: I53f1a53eec4e4a4dbdfb7e8cd155d544ee5d81ec
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
mountpoint is installed in ${bindir}
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Terminology is the default Enlightenment terminal emulator
Signed-off-by: Rodrigo Chiossi <rodrigo.chiossi@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* there is some pending work to resolve this unnecessary x11
dependency, this can be reverted together with x11 dependency
removal
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Forces native RDEPENDS of xmlto-native to be built and installed
since those files are required when creating yocto-docs
if not found, they are downloaded from upstream everytime
significant time difference is achieved.
[YOCTO #7148]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
With the current code, if we use debian package backend and enable
multilib support, the do_rootfs process would always fail with error
messages like below.
E: Unable to locate package packagegroup-core-boot
This patch fixes the above problem.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Rebase sshd_config and ssh_config with openssh upstream.
Check for the ed25519 key in the systemd keygen service.
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fix build issues due to libz being required but
is specified before use.
Change-Id: I1f26c8e656b330a4b5f1eeffee7ac13500fa98d0
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When resolving a patch, a new process of gnome-terminal
is created for every patch to be resolved, it "waits"
for the previous one to end, instead of launching
multiple windows at the same time.
[YOCTO #7254]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If tap0 interface has been created by other users on the system, we would
get error messages when using runqemu. Error messages are like below.
Acquiring lockfile for tap0...
touch: cannot touch ‘/tmp/qemu-tap-locks/tap0.lock’: Permission denied
/buildarea2/chenqi/poky/scripts/runqemu-internal: line 139: /tmp/qemu-tap-locks/tap0.lock: Permission denied
flock: 8: Bad file descriptor
The system can still boot up because runqemu would try to create a new tap
interface. So the error message above is harmless, yet somewhat annoying.
This patch fixes the above problem. With this patch, the output would be as
follows.
Acquiring lockfile for tap0...
Acquiring lockfile for /tmp/qemu-tap-locks/tap0.lock failed
Setting up tap interface under sudo
Acquiring lockfile for tap1...
Running qemu-system-arm...
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This allows an image to skip the creation of kernel depmod
data. It is useful for creating an image that will run as a
container image inside a host with no knowledge of the parent's
kernel.
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
Alexandre Belloni
Dan McGregor
Saul Wold
Ross Burton
Alejandro Hernandez
Aníbal Limón
Pengyu Ma
Maciej Borzecki
Khem Raj
Chen Qi
Paul Eggleton
Robert Yang
Timo Mueller
Chunrong Guo
Paul Barker
Jackie Huang
Rodrigo Chiossi
Martin Jansa