1 files changed, 0 insertions, 163 deletions
diff --git a/meta-networking/recipes-filter/ebtables/ebtables-2.0.10-4/ebtables.common b/meta-networking/recipes-filter/ebtables/ebtables-2.0.10-4/ebtables.common
deleted file mode 100644
index 1ae18fed3d..0000000000
--- a/meta-networking/recipes-filter/ebtables/ebtables-2.0.10-4/ebtables.common
+++ /dev/null
@@ -1,163 +0,0 @@
-#!/bin/sh
-
-[ -x /sbin/ebtables ] || exit 1
-
-EBTABLES_DUMPFILE_STEM=/etc/ebtables/dump
-
-RETVAL=0
-prog="ebtables"
-desc="Ethernet bridge filtering"
-umask 0077
-
-#default configuration
-EBTABLES_MODULES_UNLOAD="yes"
-EBTABLES_LOAD_ON_START="no"
-EBTABLES_SAVE_ON_STOP="no"
-EBTABLES_SAVE_ON_RESTART="no"
-EBTABLES_SAVE_COUNTER="no"
-EBTABLES_BACKUP_SUFFIX="~"
-
-config=/etc/default/$prog
-[ -f "$config" ] && . "$config"
-
-get_supported_tables() {
-	EBTABLES_SUPPORTED_TABLES=
-	/sbin/ebtables -t filter -L 2>&1 1>/dev/null | grep -q permission
-	if [ $? -eq 0 ]; then
-		echo "Error: insufficient privileges to access the ebtables rulesets."
-		exit 1
-	fi
-	for table in filter nat broute; do
-		/sbin/ebtables -t $table -L &> /dev/null
-		if [ $? -eq 0 ]; then
-			EBTABLES_SUPPORTED_TABLES="${EBTABLES_SUPPORTED_TABLES} $table"
-		fi
-	done
-}
-
-load() {
-	RETVAL=0
-	get_supported_tables
-	echo -n "Restoring ebtables rulesets: "
-	for table in $EBTABLES_SUPPORTED_TABLES; do
-		echo -n "$table "
-		if [ -s ${EBTABLES_DUMPFILE_STEM}.$table ]; then
-			/sbin/ebtables -t $table --atomic-file ${EBTABLES_DUMPFILE_STEM}.$table --atomic-commit
-			RET=$?
-			if [ $RET -ne 0 ]; then
-				echo -n "(failed) "
-				RETVAL=$RET
-			fi
-		else
-			echo -n "(no saved state) "
-		fi
-	done
-	if [ -z "$EBTABLES_SUPPORTED_TABLES" ]; then
-		echo -n "no kernel support. "
-	else
-		echo -n "done. "
-	fi
-	if [ $RETVAL -eq 0 ]; then
-		echo "ok"
-	else
-		echo "fail"
-	fi
-}
-
-clear_rules() {
-	RETVAL=0
-	get_supported_tables
-	echo -n "Clearing ebtables rulesets: "
-	for table in $EBTABLES_SUPPORTED_TABLES; do
-		echo -n "$table "
-		/sbin/ebtables -t $table --init-table
-	done
-
-	if [ "$EBTABLES_MODULES_UNLOAD" = "yes" ]; then
-		for mod in $(grep -E '^(ebt|ebtable)_' /proc/modules | cut -d' ' -f1) ebtables; do
-			rmmod $mod 2> /dev/null
-		done
-	fi
-	if [ -z "$EBTABLES_SUPPORTED_TABLES" ]; then
-		echo -n "no kernel support. "
-	else
-		echo -n "done. "
-	fi
-	if [ $RETVAL -eq 0 ]; then
-		echo "ok"
-	else
-		echo "fail"
-	fi
-}
-
-save() {
-	RETVAL=0
-	get_supported_tables
-	echo -n "Saving ebtables rulesets: "
-	for table in $EBTABLES_SUPPORTED_TABLES; do
-		echo -n "$table "
-		[ -n "$EBTABLES_BACKUP_SUFFIX" ] && [ -s ${EBTABLES_DUMPFILE_STEM}.$table ] && \
-		  mv ${EBTABLES_DUMPFILE_STEM}.$table ${EBTABLES_DUMPFILE_STEM}.$table$EBTABLES_BACKUP_SUFFIX
-		/sbin/ebtables -t $table --atomic-file ${EBTABLES_DUMPFILE_STEM}.$table --atomic-save
-		RET=$?
-		if [ $RET -ne 0 ]; then
-			echo -n "(failed) "
-			RETVAL=$RET
-		else
-			if [ "$EBTABLES_SAVE_COUNTER" = "no" ]; then
-				/sbin/ebtables -t $table --atomic-file ${EBTABLES_DUMPFILE_STEM}.$table -Z
-			fi
-		fi
-	done
-	if [ -z "$EBTABLES_SUPPORTED_TABLES" ]; then
-		echo -n "no kernel support. "
-	else
-		echo -n "done. "
-	fi
-	if [ $RETVAL -eq 0 ]; then
-		echo "ok"
-	else
-		echo "fail"
-	fi
-}
-
-case "$1" in
-  start)
-	[ "$EBTABLES_LOAD_ON_START" = "yes" ] && load
-	;;
-  stop)
-	[ "$EBTABLES_SAVE_ON_STOP" = "yes" ] && save
-	clear_rules
-	;;
-  restart|reload|force-reload)
-	[ "$EBTABLES_SAVE_ON_RESTART" = "yes" ] && save
-	clear_rules
-	[ "$EBTABLES_LOAD_ON_START" = "yes" ] && load
-	;;
-  load)
-	load
-	;;
-  save)
-	save
-	;;
-  status)
-	get_supported_tables
-	if [ -z "$EBTABLES_SUPPORTED_TABLES" ]; then
-		echo "No kernel support for ebtables."
-		RETVAL=1
-	else
-		echo -n "Ebtables support available, number of installed rules: "
-		for table in $EBTABLES_SUPPORTED_TABLES; do
-			COUNT=$(( $(/sbin/ebtables -t $table -L | sed -e "/^Bridge chain/! d" -e "s/^.*entries: //" -e "s/,.*$/ +/") 0 ))
-			echo -n "$table($COUNT) "
-		done
-		echo ok
-		RETVAL=0
-	fi
-	;;
-  *)
-	echo "Usage: $0 {start|stop|restart|reload|force-reload|load|save|status}" >&2
-	RETVAL=1
-esac
-
-exit $RETVAL