diff options
author | Frans Meulenbroeks <fransmeulenbroeks@gmail.com> | 2011-12-26 21:22:26 +0100 |
---|---|---|
committer | Frans Meulenbroeks <fransmeulenbroeks@gmail.com> | 2011-12-27 19:34:26 +0100 |
commit | cdef9bfa63ffd00ab18d8a4da86d2ec95b7b2d80 (patch) | |
tree | 985d24dfa4b5e57c73e1a12cd08263c11191c298 /recipes | |
parent | 6131292e6e5c8d2b3a39cbd0ca78393845eebe4b (diff) | |
download | openembedded-cdef9bfa63ffd00ab18d8a4da86d2ec95b7b2d80.tar.gz |
net-snmp: added version 5.7.1
Backported from meta-oe where it was contributed by Eric BĂ©nard
While at it also fixed some whitespace warnings.
Gave it a DEFAULT_PREFERENCE of 1 so it gets preference above the
older svn recipe (svn is deprecatted by net-snmp anyway)
Rationale for adding is because the existing recipe does not
build for uclibc, and the new version does.
Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
Diffstat (limited to 'recipes')
-rw-r--r-- | recipes/net-snmp/files/snmpd.conf | 32 | ||||
-rw-r--r-- | recipes/net-snmp/files/snmptrapd.conf | 1 | ||||
-rw-r--r-- | recipes/net-snmp/net-snmp_5.7.1.bb | 28 |
3 files changed, 44 insertions, 17 deletions
diff --git a/recipes/net-snmp/files/snmpd.conf b/recipes/net-snmp/files/snmpd.conf index 728171c427..4e6b2eb404 100644 --- a/recipes/net-snmp/files/snmpd.conf +++ b/recipes/net-snmp/files/snmpd.conf @@ -39,7 +39,7 @@ # allow me to access it?" # # By default, the agent responds to the "public" community for read -# only access, if run out of the box without any configuration file in +# only access, if run out of the box without any configuration file in # place. The following examples show you other ways of configuring # the agent so that you can change the community names, and give # yourself write access as well. @@ -150,7 +150,7 @@ syscontact Root <root@localhost> (configure /etc/snmp/snmpd.local.conf) #proc sendmail 10 1 # A snmpwalk of the prTable would look something like this: -# +# # % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.2 # enterprises.ucdavis.procTable.prEntry.prIndex.1 = 1 # enterprises.ucdavis.procTable.prEntry.prIndex.2 = 2 @@ -180,8 +180,8 @@ syscontact Root <root@localhost> (configure /etc/snmp/snmpd.local.conf) # Note that the errorFlag for mountd is set to 1 because one is not # running (in this case an rpc.mountd is, but thats not good enough), # and the ErrMessage tells you what's wrong. The configuration -# imposed in the snmpd.conf file is also shown. -# +# imposed in the snmpd.conf file is also shown. +# # Special Case: When the min and max numbers are both 0, it assumes # you want a max of infinity and a min of 1. # @@ -220,7 +220,7 @@ syscontact Root <root@localhost> (configure /etc/snmp/snmpd.local.conf) # #exec shelltest /bin/sh /tmp/shtest -# Then, +# Then, # % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.8 # enterprises.ucdavis.extTable.extEntry.extIndex.1 = 1 # enterprises.ucdavis.extTable.extEntry.extIndex.2 = 2 @@ -246,7 +246,7 @@ syscontact Root <root@localhost> (configure /etc/snmp/snmpd.local.conf) # # The agent can check the amount of available disk space, and make -# sure it is above a set limit. +# sure it is above a set limit. # disk PATH [MIN=DEFDISKMINIMUMSPACE] # @@ -260,7 +260,7 @@ syscontact Root <root@localhost> (configure /etc/snmp/snmpd.local.conf) # % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.9 # enterprises.ucdavis.diskTable.dskEntry.diskIndex.1 = 0 -# enterprises.ucdavis.diskTable.dskEntry.diskPath.1 = "/" Hex: 2F +# enterprises.ucdavis.diskTable.dskEntry.diskPath.1 = "/" Hex: 2F # enterprises.ucdavis.diskTable.dskEntry.diskDevice.1 = "/dev/dsk/c201d6s0" # enterprises.ucdavis.diskTable.dskEntry.diskMinimum.1 = 10000 # enterprises.ucdavis.diskTable.dskEntry.diskTotal.1 = 837130 @@ -294,9 +294,9 @@ syscontact Root <root@localhost> (configure /etc/snmp/snmpd.local.conf) # enterprises.ucdavis.loadTable.laEntry.loadaveNames.1 = "Load-1" # enterprises.ucdavis.loadTable.laEntry.loadaveNames.2 = "Load-5" # enterprises.ucdavis.loadTable.laEntry.loadaveNames.3 = "Load-15" -# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.1 = "0.49" Hex: 30 2E 34 39 -# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.2 = "0.31" Hex: 30 2E 33 31 -# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.3 = "0.26" Hex: 30 2E 32 36 +# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.1 = "0.49" Hex: 30 2E 34 39 +# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.2 = "0.31" Hex: 30 2E 33 31 +# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.3 = "0.26" Hex: 30 2E 32 36 # enterprises.ucdavis.loadTable.laEntry.loadaveConfig.1 = "12.00" # enterprises.ucdavis.loadTable.laEntry.loadaveConfig.2 = "14.00" # enterprises.ucdavis.loadTable.laEntry.loadaveConfig.3 = "14.00" @@ -312,7 +312,7 @@ syscontact Root <root@localhost> (configure /etc/snmp/snmpd.local.conf) ############################################################################### # Extensible sections. -# +# # This alleviates the multiple line output problem found in the # previous executable mib by placing each mib in its own mib table: @@ -346,8 +346,8 @@ syscontact Root <root@localhost> (configure /etc/snmp/snmpd.local.conf) # the .50.* outputs above to change to reasonable text descriptions. # Other ideas: -# -# exec .1.3.6.1.4.1.2021.51 ps /bin/ps +# +# exec .1.3.6.1.4.1.2021.51 ps /bin/ps # exec .1.3.6.1.4.1.2021.52 top /usr/local/bin/top # exec .1.3.6.1.4.1.2021.53 mailq /usr/bin/mailq @@ -356,17 +356,17 @@ syscontact Root <root@localhost> (configure /etc/snmp/snmpd.local.conf) ############################################################################### # Pass through control. -# +# # Usage: # pass MIBOID EXEC-COMMAND # # This will pass total control of the mib underneath the MIBOID -# portion of the mib to the EXEC-COMMAND. +# portion of the mib to the EXEC-COMMAND. # # Note: You'll have to change the path of the passtest script to your # source directory or install it in the given location. -# +# # Example: (see the script for details) # (commented out here since it requires that you place the # script in the right location. (its not installed by default)) diff --git a/recipes/net-snmp/files/snmptrapd.conf b/recipes/net-snmp/files/snmptrapd.conf index 8d2e4375ef..a012a0001b 100644 --- a/recipes/net-snmp/files/snmptrapd.conf +++ b/recipes/net-snmp/files/snmptrapd.conf @@ -15,4 +15,3 @@ # # PLEASE: read the snmptrapd.conf(5) manual page as well! # - diff --git a/recipes/net-snmp/net-snmp_5.7.1.bb b/recipes/net-snmp/net-snmp_5.7.1.bb new file mode 100644 index 0000000000..08571e9043 --- /dev/null +++ b/recipes/net-snmp/net-snmp_5.7.1.bb @@ -0,0 +1,28 @@ +require net-snmp.inc +PR = "${INC_PR}.0" +LIC_FILES_CHKSUM = "file://README;beginline=3;endline=8;md5=7f7f00ba639ac8e8deb5a622ea24634e" + +DEFAULT_PREFERENCE = "1" + +SRC_URI = "${SOURCEFORGE_MIRROR}/net-snmp/net-snmp-${PV}.tar.gz \ + file://init \ + file://snmpd.conf \ + file://snmptrapd.conf" + +EXTRA_OECONF += "--disable-embedded-perl --with-perl-modules=no" +EXTRA_OEMAKE = "INSTALL_PREFIX=${D}" + +do_configure_prepend() { + gnu-configize -f + # We better change sources and re-autoconf here, but + # required autoconf is too new for us. + sed -e '/echo.*\".*\\\\.*\"/s/echo/echo -e/g' \ + -e 's/tail -1/tail -n 1/g' \ + -i configure +} + +PARALLEL_MAKE = "" +CCACHE = "" + +SRC_URI[md5sum] = "c95d08fd5d93df0c11a2e1bdf0e01e0b" +SRC_URI[sha256sum] = "7c71c9650c65b715356547e20ca2dbe6313944278af8cc19c32a5337f46b181f" |