Age | Commit message (Collapse) | Author |
|
This makes use of the oe.patch.GitApplyTree.commitIgnored() function to
create commits that shall be ignored by `devtool finish`.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Provide a function exec_fakeroot_no_d which does the same like
exec_fakeroot does, but is usable independenlty from bitbake. This
allows to use the fanction from scripts where the d variable is not
available.
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adding the support of submodules required a lot of changes on the
internal data structures:
* initial_rev/startcommit used as a starting point for looking at new
/ updated commits was replaced by a dictionary where the keys are the
submodule name ("." for main repo) and the values are the
initial_rev/startcommit
* the extractPatches function now extracts patch for the main repo and
for all submodules and stores them in a hierarchical way describing the
submodule path
* store initial_rev/commit also for all submodules inside the recipe
bbappend file
* _export_patches now returns dictionaries that contains the 'patchdir'
parameter (if any). This parameter is used to add the correct
'patchdir=' parameter on the recipe
Also, recipe can extract a secondary git tree inside the workdir.
By default, at the end of the do_patch function, there is a hook in
devtool that commits everything that was modified to have a clean
repository. It uses the command: "git add .; git commit ..."
The issue here is that, it adds the secondary git tree as a submodule
but in a wrong way. Doing "git add <git dir>" declares a submodule but do
not adds a url associated to it, and all following "git submodule foreach"
commands will fail.
So detect that a git tree was extracted inside S and correctly add it
using "git submodule add <url> <path>", so that it will be considered as a
regular git submodule
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In the case of a repository with submodules, we need to add the
"devtool-base" and "devtool-patched" tag on all submodules in order to
properly detect the added/removed/modified patches
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If nothing else is specified, 'git init' uses its default repository
template from the install location (e.g. /usr/share/git-core/templates),
which already includes an info/ subdirectory. However, when setting
init.templateDir to a different template path in ~/.gitconfig, this
isn't necessarily the case, and it can lead to setup_git_repo() failing
with stack traces like:
File: '.../scripts/lib/devtool/__init__.py', lineno: 234, function: setup_git_repo
0230: pass
0231: if 'singletask.lock\n' not in excludes:
0232: excludes.append('singletask.lock\n')
0233: bb.warn("try writing excludefile")
*** 0234: with open(excludefile, 'w') as f:
0235: for line in excludes:
0236: f.write(line)
0237:
0238: bb.process.run('git checkout -b %s' % devbranch, cwd=repodir)
Exception: FileNotFoundError: [Errno 2] No such file or directory: '.../devtooltmp-6m36b181/workdir/foobar-1.0.1/.git/info/exclude'
Fix this edge case by creating the .git/info/ directory first.
Fixes: 334ba846c795fc0d8c73 (2018-02-01, "devtool: set up git repos so that singletask.lock is ignored")
Signed-off-by: Roland Hieber <rhi@pengutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* I see a case where a tarball contains .gitignore and bunch of files
which are normally ignored in git, but still included in the tarball
(e.g. configure script next to configure.ac)
* when devtool is creating a git repo in workspace it won't include these
files from tarball in the initial devtool-base commit, because
git ls-files won't list them
* but then the first .patch file (without git headers) when applied with
GitApplyTree._applypatch() will add all these still ignored files to a
commit which used to only modify some files, because it's using -f:
# Add all files
shellcmd = ["git", "add", "-f", "-A", "."]
output += runcmd(["sh", "-c", " ".join(shellcmd)], self.dir)
at least in this case it would be better to add all ignored files in
the initial devtool-base commit and then --force-patch-refresh will just
include the small modification as before instead of adding unrelated
files, just because they were initially ignored - this behavior will
also match with the do_patch task in the actual build where the
.gitignore is ignored when unpacking some tarball
* my use-case is fixed in setup_git_repo, but similar function is in
devtool upgrade, I've changed it there as well
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This adds SPDX license headers in place of the wide assortment of things
currently in our script headers. We default to GPL-2.0-only except for the
oeqa code where it was clearly submitted and marked as MIT on the most part
or some scripts which had the "or later" GPL versioning.
The patch also drops other obsolete bits of file headers where they were
encoountered such as editor modelines, obsolete maintainer information or
the phrase "All rights reserved" which is now obsolete and not required in
copyright headers (in this case its actually confusing for licensing as all
rights were not reserved).
More work is needed for OE-Core but this takes care of the bulk of the scripts
and meta/lib directories.
The top level LICENSE files are tweaked to match the new structure and the
SPDX naming.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Devtool creates a git repository for extracted sources in a temporary
directory and then moves it to a final destination after patching is
done. Unfortunately devtool is not aware that some of its git operations
may have caused git garbage collector to start in background. If timing
is just right a repository move fails because GC is removing git objects
while they are being moved.
The issue was hit on Krogoth release, but the code that moves created
git repository is still the same.
Disable gc.autodetach to make GC run synchronously and block git until
it is done.
Traceback (most recent call last):
File "<snip>/openembedded-core/scripts/devtool", line 342, in <module>
ret = main()
File "<snip>/openembedded-core/scripts/devtool", line 329, in main
ret = args.func(args, config, basepath, workspace)
File "<snip>/openembedded-core/scripts/lib/devtool/standard.py", line 352, in extract
initial_rev = _extract_source(srctree, args.keep_temp, args.branch, False, rd)
File "<snip>/openembedded-core/scripts/lib/devtool/standard.py", line 644, in _extract_source
shutil.move(srcsubdir, srctree)
File "/usr/lib/python2.7/shutil.py", line 299, in move
copytree(src, real_dst, symlinks=True)
File "/usr/lib/python2.7/shutil.py", line 208, in copytree
raise Error, errors
Error: [('/tmp/devtool5RXkuX/workdir/grpc-1.2.5/.git/objects/5e', '<snip>/build/grpc/grpc_src/.git/objects/5e', "[Errno 2] No such file or directory: '/tmp/devtool5RXkuX/workdir/grpc-1.2.5/.git/objects/5e'"), ('/tmp/devtool5RXkuX/workdir/grpc-1.2.5/.git/objects/57', '<snip>/build/grpc/grpc_src/.git/objects/57', "[Errno 2] No such file or directory: '/tmp/devtool5RXkuX/workdir/grpc-1.2.5/.git/objects/57'"), many git objects ... ]
Signed-off-by: Taras Kondratiuk <takondra@cisco.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
singletask.lock is written out while certain tasks execute for recipes
that have externalsrc.bbclass enabled - this includes recipes in
devtool's workspace. It appears that there's a race where
singletask.lock will be there one minute and then when we try to get the
file checksum of it (since we want to know if anything in the source
tree has changed) it will be gone, and git chokes. To fix that, add
singletask.lock to .git/info/exclude in the repository, regardless of
whether we created the repository or not. In any case singletask.lock
should never be tracked by git, so this is a good thing to be doing for
that reason as well.
This fixes oe-selftest failures in test_devtool_modify that we've seen
on the Yocto Project autobuilder:
bb.data_smart.ExpansionError: Failure expanding variable
do_compile[file-checksums], expression was ${@srctree_hash_files(d)}
which triggered exception CalledProcessError: Command
'['git', 'add', '-A', '.']' returned non-zero exit status 128.
Note that this only fixes this issue for devtool; if you are using
externalsrc independently of devtool there's a chance this will still
be an issue unless you add singletask.lock to your .gitignore.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If the git repository for a recipe in the workspace has uncommitted
changes in it then it's possible that the user has forgotten to commit
something, so check and exit if there are any. Provide a -f/--force
option to continue in the case where the uncommitted changes aren't
needed.
Separately, if the repository is in the middle of a rebase or git am /
apply then error out (without the opportunity to force) since the user
really needs to sort this out before finishing.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* Show a warning in devtool upgrade if the version is less than the
current version suggesting that the user may need to bump PE in the
recipe
* Show a warning in devtool add and devtool upgrade if the version looks
like a pre-release version suggesting using a version number that
won't mess up the progression when you come to upgrade to the final
release version.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Alongside reworking the way devtool extracts source, we now need to
ensure that within the extensible SDK where task signatures are locked,
the signatures of the tasks for the recipes being worked on get unlocked
at the right time or otherwise we'll now get taskhash mismatches when
running devtool modify on a recipe that was included in the eSDK such as
the kernel (due to a separate bug). The existing mechanism for
auto-unlocking recipes was a little weak and was happening too late, so
I've reimplemented it so that:
(a) it gets triggered immediately when the recipe/append is created
(b) we avoid writing to the unlocked signatures file unnecessarily
(since it's a global configuration file) and
(c) within the eSDK configuration we whitelist SIGGEN_UNLOCKED_RECIPES
to avoid unnecessary reparses every time we perform one of the
devtool operations that does need to change this list.
Fixes [YOCTO #11883] (not the underlying cause, but this manifestation
of the issue).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Takes a tar archive created by 'devtool export' and imports (untars) it
into the workspace. Currently the whole tar archive is imported, there
is no way to limit what is imported.
https://bugzilla.yoctoproject.org/show_bug.cgi?id=10510
[YOCTO #10510]
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This avoids test failures like:
INFO - ======================================================================
INFO - FAIL [1.755s]: test_devtool_layer_plugins (devtool.DevtoolTests)
INFO - ----------------------------------------------------------------------
INFO - Traceback (most recent call last):
File "/media/build1/poky/meta/lib/oeqa/core/decorator/__init__.py", line 32, in wrapped_f
return func(*args, **kwargs)
File "/media/build1/poky/meta/lib/oeqa/selftest/cases/devtool.py", line 1354, in test_devtool_layer_plugins
self.assertEqual(result.output, s[::-1])
AssertionError: "NOTE: Starting bitbake server...\noY senu[36 chars]rciM" != "oY senuZ s'enoynA morF tiforP oN edaM tfosorciM"
- NOTE: Starting bitbake server...
oY senuZ s'enoynA morF tiforP oN edaM tfosorciM
INFO - ----------------------------------------------------------------------
since there is corruption in the output. Setting the logging up before
calling tinfoil.prepare() resolves this.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Across devtool and recipetool we had an ugly set of code for ensuring
that we can call an npm binary, and much of that ugliness was a result
of not being able to run build tasks when tinfoil was active - if
recipetool found that npm was required and we didn't know beforehand
(e.g. we're fetching from a plain git repository as opposed to an npm://
URL where it's obvious) then it had to exit and return a special result
code, so that devtool knew it needed to build nodejs-native and then
call recipetool again. Now that we are using real build tasks to fetch
and unpack, we can drop most of this and move the code to the one place
where it's still needed (i.e. create_npm where we potentially have to
deal with node.js code in a plain source repository).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Either both or none of the paths must be passed through
os.path.abspath or things like 'A//B', 'A/./B/', and 'A/B/' in S will
cause unintentional mismatches even when B = "${S}".
Using os.path.abspath for both seems more likely to be correct as that
will also handle the case where ${B} != ${S} but the abspaths are
equal.
Signed-off-by: Ola x Nilsson <olani@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The change over to recipe specific sysroots means that we can no longer
get a known location simply from configuration for the npm binary - we
need to get the recipe sysroot for nodejs-native, look there for npm if
we need to check it's present, and add that to PATH when calling out to
npm. Unfortunately this means anywhere we need to get that path we have
to have parsed all recipes, otherwise we have no reliable way of
resolving nodejs-native. Thus we have to change recipetool create to
always parse all recipes (the structure of the code does not allow us to
do this conditionally).
In the worst case, if npm hasn't already been added to its own sysroot
and we are fetching from a source repository rather than an npm
registry, this gets a bit ugly because we end up parsing recipes three
times:
1) recipetool startup, which then fetches the code and determines it's
a node.js module, finds that npm isn't available and then exits with
a specific error to tell devtool it needs to build npm
2) when we invoke bitbake -c addto_recipe_sysroot nodejs-native
3) when we re-invoke recipetool
This code is badly in need of refactoring, but now is unfortunately not
the time to do that, so we're going to have to live with this ugliness
for now.
Fixes [YOCTO #10992].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Since the tinfoil2 refactoring, if an error occurred during parsing, we
were showing a traceback and not correctly exiting (since we weren't
calling shutdown()). Fix both of these issues.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
With the move to tinfoil2, the behaviour when parsing failed has changed
a bit - exceptions are now raised, so handle these appropriately.
Specifically when if parsing the recipe created when running devtool add
fails, rename it to .bb.parsefailed so that the user can run bitbake
afterwards without parsing being interrupted.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
getVar() now defaults to expanding by default, thus remove the True
option from getVar() calls with a regex search and replace.
Search made with the following regex: getVar ?\(( ?[^,()]*), True\)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Use Tinfoil.parse_recipe_file() and Tinfoil.parse_recipe() instead of
the recipeutils equivalents, and replace any local duplicate
implementations. This not only tidies up the code but also allows these
calls to work in memres mode.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
In previous implementation, a UnicodeDecodeError exception will be
raised if multi-byte encoded characters are printed by the subprocess.
As an example, the following command will fail in an en_US.UTF-8
environment because wget quotes its saving destination with '‘'(0xE2
0x80 0x98), while just the first byte is provided for decoding:
devtool add recipe http://example.com/source.tar.xz
The patch fixes the issue by avoiding such kind of incomplete decoding.
Signed-off-by: Jiajie Hu <jiajie.hu@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If the user runs devtool add on an npm:// URL (or source tree that uses
node.js), and npm is not available, just build nodejs-native instead of
telling the user they need to do it; if that fails because there isn't
any such recipe (which would be the default, since it's not in OE-Core)
then produce a slightly more readable error message hinting at what the
user needs to do.
Note that this forces the use of nodejs-native rather than npm on the
host - this makes sense for two reasons: (1) we need it to be compatible
with nodejs for the target, and (2) we have to have a recipe for that
anyway, so allowing you to avoid having a recipe for the native version
isn't really beneficial.
There's a bit of a hack in here in order to allow this - for node.js
sources that aren't fetched via npm we don't know that they are that
until we've fetched and unpacked them, by which time we're inside
recipetool and have an active tinfoil instance that will prevent bitbake
being run. To avoid this being an issue, we allow recipetool to get to
the point where we know we need npm and then exit with a specific exit
code, at which point devtool can try to build it and then if that
succeeds, it will re-execute recipetool. This is definitely not ideal,
but it can't really be refactored and done properly until we do the
tinfoil2 refactoring; in the mean time though we still want to be
helpful to the user.
Fixes [YOCTO #10337].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When using PATCHTOOL = "git", the user of the system is not really the
committer - it's the build system itself. Thus, specify "dummy" values
for username and email instead of using the user's configured values.
Various parts of the devtool code that need to make commits have also
been updated to use the same logic.
This allows PATCHTOOL = "git" and devtool to be used on systems where
git user.name / user.email has not been set (on versions of git where
it doesn't default a value under this circumstance).
If you want to return to the old behaviour where the externally
configured user name / email are used, set the following in your
local.conf:
PATCH_GIT_USER_NAME = ""
PATCH_GIT_USER_EMAIL = ""
Fixes [YOCTO #8703].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
multi-configuration builds
Unfortunately to implenent multiconfig support in bitbake some APIs
had to change. This updates code in OE to match the changes in bitbake.
Its mostly periperhal changes around devtool/recipetool
[Will need a bitbake version requirement bump which I'll make when merging]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Certain recipes cannot be used with devtool extract / modify / upgrade -
usually because they don't provide any source. Return a specific exit
code (4) so that scripts such as scripts/contrib/devtool-stress.py know
the difference between this and a genuine failure.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Moved call of decode('utf-8') as close as possible to
call of subprocess API to avoid calling it in a lot of
other places.
Decoded binary data to utf-8 where appropriate to fix devtool
and recipetool tests in python 3 environment.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
|
Python 3 doesn't have basestring type as all string
are unicode strings.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
|
Replaced iteritems -> items, itervalues -> values,
iterkeys -> keys or 'in'
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
|
When you need to set EXTRA_OECONF for a recipe, you need to know what
options the configure script actually supports; the configure script
however is only accessible from within a devshell and (at least in the
case of autotooled software fetched from an SCM repository) may not
actually exist until do_configure has run. Thus, provide a "devtool
configure-help" subcommand that runs the configure script for a recipe
with --help and shows you the output through a pager (e.g. less),
prefaced by a header describing the current options being specified.
There is basic support for autotools, cmake and bare configure scripts.
The cmake support is a little hacky since cmake doesn't really have a
concise help option that lists user-defined knobs (without actually
running through the configure process), however that being a design
feature of cmake there's not much I can think of to do about that at
the moment.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It's logical that you would want to build BBCLASSEXTENDed items
separately through devtool build, so simply allow that - we're just
passing the name verbatim to bitbake, so all it means is adjusting the
validation.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the recipe file itself was created in the workspace, and it uses
BBCLASSEXTEND (e.g. through devtool add --also-native), then we need to
clean the other variants as well.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We're repeating this in a couple of places, so we might as well have a
function to do it.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is just belt-and-braces but we ought to use try..finally in this
kind of situation, so just do it.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Enable variable history tracking so that the variables are updated in
the correct file - i.e. in the file they are already defined.
[YOCTO #7715]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* extract: Copy all local source files (i.e. non-compressed/non-arcived
SRC_URI files that have file:// URI prefix) - excluding patches - to
the srctree repository. The files will be placed in a subdirectory
called 'oe-local-files'. The oe-local-files directory is not committed
to the Git repository, but, marked to be ignored by a .gitignore file.
The developer can manually add and commit the files to Git if the
changes to them need to be tracked.
Before this patch, local source files (were copied (and committed) to
the srctree repository only in some special cases (basically when
S=WORKDIR) when doing devtool-extract. For most of the packages local
files were not copied at all.
* update-recipe: This patch causes the local files to be 'synced' from
the srctree (i.e. from the 'oe-local-files' subdirectory) to the
layer. Being 'synced' means that in addition to copying modified
files over the original sources, devtool will also handle removing and
adding local source files and updating the recipe accordingly. We
don't want to create patches against the local source files but rather
update them directly. Thus, 'oe-local-file' directory is ignored in
patch generation when doing update-recipe, even if committed to Git.
This functionality is only enabled if the 'oe-local-files' directory
is present in srctree.
[YOCTO #7602]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Do not change change current working directory permanently, but, only
for the duration of tinfoil initialization instead. The previous fix
caused very unintuitive behavior where using relative paths were solved
with respect to the builddir instead of the current working directory.
E.g. calling "devtool extract zlib ./zlib" would always create create
srctree in ${TOPDIR}/zlib, independent of the users cwd.
(From OE-Core rev: 4c7f159b0e17a0475a4a4e9dc4dd012e3d2e6a1f)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the fetched source isn't already a git repository, initialise it as
one and then branch and tag, just as we do with "devtool modify". This
makes it easier to make changes, commit them and then use the
"devtool update-recipe" command to turn those commits into patches
on the recipe.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When we were adding a recipe for software that would typically be built
in the same directory as the source, we were always using a separate
build directory unless the user explicitly specified not to, leading to
errors for software that doesn't expect to be built that way (such as
Python modules using distutils). Split out the code that makes this
determination automatically from the "devtool modify" and "devtool
upgrade" code and re-use that here so the behaviour is consistent.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These functions ostensibly allowed parsing a recipe without bbappends
but this clearly hadn't been tested because a variable was unassigned in
both of them in that case.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Sometimes, particularly if you extracted the source to /tmp which is on
tmpfs, the external source tree that is being pointed to may no longer
exist when you come to run "devtool build" or "devtool update-recipe"
etc. Make all of the commands that need to check for a recipe being in
the workspace call a single function and have that function additionally
check the source tree still exists where appropriate.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This reverts commit 69c63728dae38d5b1cc9874268f235a07e04d3db.
Moved add_md5 back to standard.py as it's not used in
any plugin anymore.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
|
Moved standard.py:_parse_recipe -> __init__.py:parse_recipe and
standard.py:_get_recipe_file -> __init__.py:get_recipe_file
to be able to call them from other modules.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
|
Moved _add_md5 function from standard.py to __init__.py to
be able to call it from other modules.
(From OE-Core rev: ee38bb20dc7ba21dac782d8d13383f81dfedef55)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This makes it easier to extend, as a layer can add its own sub-commands.
Argument parsing is also separated into two steps, the same way it's done in
recipetool, as we need access to the global command-line arguments early,
before plugins are loaded, both for debugging arguments and for the bitbake
path (we need to load the bitbake module to get tinfoil, which is now needed
to load the plugins).
Rather than constructing tinfoil once and passing it through into sub-commands
for their use, we have to construct it for configuration metadata, use it, and
then shut it down, as some sub-commands call out to recipetool, which needs
its own tinfoil instance, and therefore needs to acquire the bitbake lock. If
we're still holding the lock at that point, that's clearly a problem.
[YOCTO #7625]
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It turns out that scp can't be used to copy symlinks because it follows
them instead of copying them, and this is by design (since it emulates
rcp which also behaved this way); the unfortunate result is that
symlinks that point to valid files on the host translate into the host
file being copied to the target (yuck). The simplest alternative that
does not have this undesirable behaviour is to use tar and pipe it over
ssh.
At the same time, it would be even better if we properly reflect file
permissions and ownership on the target that have been established
within the pseudo environment. We can do this by executing the copy
process under pseudo, which turns out to be quite easy with access to
the pseudo environment set up by the build system.
Fixes [YOCTO #7868].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Use DevtoolError exception more widely for handling error cases. This
exception is now caught in the main script and raising it can be used to
exit with an error. This hopefully simplifies error handling. The
change also makes exit codes more consistent, always returning '1' when
an error occurs.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Most of the time when bb.note() gets called we want to see the output,
so ensure the level is set appropriately depending on the command line
options instead of being fixed at warning. (We don't want to see the
notes for fetch/unpack/patch though as they are too verbose).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If we execute an external command, we ought to prepare for the
possibility that it can fail and handle the failure appropriately. We
can especially expect this to happen when running bitbake in this
scenario. Ensure we return the appropriate exit code to the calling
process.
Fixes [YOCTO #7757].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|