summaryrefslogtreecommitdiffstats
path: root/meta/classes-recipe/uboot-sign.bbclass
diff options
context:
space:
mode:
authorSean Anderson <sean.anderson@seco.com>2022-10-21 19:37:26 -0400
committerRichard Purdie <richard.purdie@linuxfoundation.org>2022-10-26 12:26:17 +0100
commit5e12dc911d0c541f43aa6d0c046fb87e8b7c1f7e (patch)
treeb1961bf2a6308ad0a6263a05ab1a9a1910fef641 /meta/classes-recipe/uboot-sign.bbclass
parent60c1a170f1f8c11bc8f42026debf121433b39115 (diff)
downloadopenembedded-core-5e12dc911d0c541f43aa6d0c046fb87e8b7c1f7e.tar.gz
u-boot: Rework signing to remove interdependencies
The U-Boot signing code is a bit of a mess. The problem is that mkimage determines the public keys to embed into a device tree based on an image that it is signing. This results in all sorts of contortions: U-Boot has to be available to the kernel recipe so that it can have the correct public keys embedded. Then, the signed U-Boot has to be made available to U-Boot's do_deploy. This same dance is then repeated for SPL. To complicate matters, signing for U-Boot and U-Boot SPL is optional, so the whole process must be seamlessly integrated with a non-signed build. The complexity and interdependency of this process makes it difficult to extend. For example, it is not possible to install a signed U-Boot binary into the root filesystem. This is first because u-boot:do_install must run before linux:do_assemble_fitimage, which must run before u-boot:do_deploy. But aside from infrastructure issues, installing a signed U-Boot also can't happen, because the kernel image might have an embedded initramfs (containing the signed U-Boot). However, all of this complexity is accidental. It is not necessary to embed the public keys into U-Boot and sign the kernel in one fell swoop. Instead, we can sign the kernel, stage it, and sign the staged kernel again to embed the public keys into U-Boot [1]. This twice-signed kernel serves only to provide the correct parameters to mkimage, and does not have to be installed or deployed. By cutting the dependency of linux:do_assemble_fitimage on u-boot:do_install, we can drastically simplify the build process, making it much more extensible. The process of doing this conversion is a bit involved, since the U-Boot and Linux recipes are so intertwined at the moment. The most major change is that uboot-sign is no longer inherited by kernel-fitimage. Similarly, all U-Boot-related tasks have been removed from kernel-fitimage. We add a new step to the install task to stage the kernel in /sysroot-only. The logic to disable assemble_fitimage has been removed. We always assemble it, even if the final fitImage will use a bundled initramfs, because U-Boot will need it. On the U-Boot side, much of the churn stems from multiple config support. Previously, we took a fairly ad-hoc approach to UBOOT_CONFIG and UBOOT_MACHINE, introducing for loops wherever we needed to deal with them. However, I have chosen to use a much more structured approach. Each task which needs to use the build directory uses the following pseudocode: do_mytask() { if ${UBOOT_CONFIG}; then for config, type in zip(${UBOOT_CONFIG}, ${UBOOT_MACHINE}); do cd ${config} mytask_helper ${type} done else cd ${B} mytask_helper "" fi } By explicitly placing the work in mytask_helper, we make it easier to ensure that everything is covered, and we also allow bbappends files to more easily extend the task (as otherwise they would need to reimplement the loop themselves). [1] It doesn't particularly matter what we sign. Any FIT will do, but I chose the kernel's because we already went to the trouble of setting it up with the correct hashes and signatures. In the future, we could create a "dummy" image and sign that instead, but it would probably have to happen in the kernel recipe anyway (so we have access to the appropriate variables). Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Diffstat (limited to 'meta/classes-recipe/uboot-sign.bbclass')
-rw-r--r--meta/classes-recipe/uboot-sign.bbclass417
1 files changed, 189 insertions, 228 deletions
diff --git a/meta/classes-recipe/uboot-sign.bbclass b/meta/classes-recipe/uboot-sign.bbclass
index 569907fa68..3dc029c429 100644
--- a/meta/classes-recipe/uboot-sign.bbclass
+++ b/meta/classes-recipe/uboot-sign.bbclass
@@ -5,7 +5,7 @@
#
# This file is part of U-Boot verified boot support and is intended to be
-# inherited from u-boot recipe and from kernel-fitimage.bbclass.
+# inherited from the u-boot recipe.
#
# The signature procedure requires the user to generate an RSA key and
# certificate in a directory and to define the following variable:
@@ -22,19 +22,6 @@
#
# The signature support is limited to the use of CONFIG_OF_SEPARATE in U-Boot.
#
-# The tasks sequence is set as below, using DEPLOY_IMAGE_DIR as common place to
-# treat the device tree blob:
-#
-# * u-boot:do_install:append
-# Install UBOOT_DTB_BINARY to datadir, so that kernel can use it for
-# signing, and kernel will deploy UBOOT_DTB_BINARY after signs it.
-#
-# * virtual/kernel:do_assemble_fitimage
-# Sign the image
-#
-# * u-boot:do_deploy[postfuncs]
-# Deploy files like UBOOT_DTB_IMAGE, UBOOT_DTB_SYMLINK and others.
-#
# For more details on signature process, please refer to U-Boot documentation.
# We need some variables from u-boot-config
@@ -49,6 +36,7 @@ SPL_SIGN_ENABLE ?= "0"
# Default value for deployment filenames.
UBOOT_DTB_IMAGE ?= "u-boot-${MACHINE}-${PV}-${PR}.dtb"
UBOOT_DTB_BINARY ?= "u-boot.dtb"
+UBOOT_DTB_SIGNED ?= "${UBOOT_DTB_BINARY}-signed"
UBOOT_DTB_SYMLINK ?= "u-boot-${MACHINE}.dtb"
UBOOT_NODTB_IMAGE ?= "u-boot-nodtb-${MACHINE}-${PV}-${PR}.bin"
UBOOT_NODTB_BINARY ?= "u-boot-nodtb.bin"
@@ -62,6 +50,7 @@ UBOOT_FITIMAGE_SYMLINK ?= "u-boot-fitImage-${MACHINE}"
SPL_DIR ?= "spl"
SPL_DTB_IMAGE ?= "u-boot-spl-${MACHINE}-${PV}-${PR}.dtb"
SPL_DTB_BINARY ?= "u-boot-spl.dtb"
+SPL_DTB_SIGNED ?= "${SPL_DTB_BINARY}-signed"
SPL_DTB_SYMLINK ?= "u-boot-spl-${MACHINE}.dtb"
SPL_NODTB_IMAGE ?= "u-boot-spl-nodtb-${MACHINE}-${PV}-${PR}.bin"
SPL_NODTB_BINARY ?= "u-boot-spl-nodtb.bin"
@@ -92,58 +81,48 @@ UBOOT_FIT_KEY_REQ_ARGS ?= "-batch -new"
# Standard format for public key certificate
UBOOT_FIT_KEY_SIGN_PKCS ?= "-x509"
-# Functions on this bbclass can apply to either U-boot or Kernel,
-# depending on the scenario
-UBOOT_PN = "${@d.getVar('PREFERRED_PROVIDER_u-boot') or 'u-boot'}"
-KERNEL_PN = "${@d.getVar('PREFERRED_PROVIDER_virtual/kernel')}"
+# This is only necessary for determining the signing configuration
+KERNEL_PN = "${PREFERRED_PROVIDER_virtual/kernel}"
-# We need u-boot-tools-native if we're creating a U-Boot fitImage
python() {
- if d.getVar('UBOOT_FITIMAGE_ENABLE') == '1':
- depends = d.getVar("DEPENDS")
- depends = "%s u-boot-tools-native dtc-native" % depends
- d.setVar("DEPENDS", depends)
+ # We need u-boot-tools-native if we're creating a U-Boot fitImage
+ sign = d.getVar('UBOOT_SIGN_ENABLE') == '1'
+ if d.getVar('UBOOT_FITIMAGE_ENABLE') == '1' or sign:
+ d.appendVar('DEPENDS', " u-boot-tools-native dtc-native")
+ if sign:
+ d.appendVar('DEPENDS', " " + d.getVar('KERNEL_PN'))
}
-concat_dtb_helper() {
- if [ -e "${UBOOT_DTB_BINARY}" ]; then
- ln -sf ${UBOOT_DTB_IMAGE} ${DEPLOYDIR}/${UBOOT_DTB_BINARY}
- ln -sf ${UBOOT_DTB_IMAGE} ${DEPLOYDIR}/${UBOOT_DTB_SYMLINK}
- fi
+concat_dtb() {
+ type="$1"
+ binary="$2"
- if [ -f "${UBOOT_NODTB_BINARY}" ]; then
- install ${UBOOT_NODTB_BINARY} ${DEPLOYDIR}/${UBOOT_NODTB_IMAGE}
- ln -sf ${UBOOT_NODTB_IMAGE} ${DEPLOYDIR}/${UBOOT_NODTB_SYMLINK}
- ln -sf ${UBOOT_NODTB_IMAGE} ${DEPLOYDIR}/${UBOOT_NODTB_BINARY}
+ if [ -e "${UBOOT_DTB_BINARY}" ]; then
+ # Re-sign the kernel in order to add the keys to our dtb
+ ${UBOOT_MKIMAGE_SIGN} \
+ ${@'-D "${UBOOT_MKIMAGE_DTCOPTS}"' if len('${UBOOT_MKIMAGE_DTCOPTS}') else ''} \
+ -F -k "${UBOOT_SIGN_KEYDIR}" \
+ -K "${UBOOT_DTB_BINARY}" \
+ -r ${B}/fitImage-linux \
+ ${UBOOT_MKIMAGE_SIGN_ARGS}
+ cp ${UBOOT_DTB_BINARY} ${UBOOT_DTB_SIGNED}
fi
# If we're not using a signed u-boot fit, concatenate SPL w/o DTB & U-Boot DTB
- # with public key (otherwise it will be deployed by the equivalent
- # concat_spl_dtb_helper function - cf. kernel-fitimage.bbclass for more details)
+ # with public key (otherwise U-Boot will be packaged by uboot_fitimage_assemble)
if [ "${SPL_SIGN_ENABLE}" != "1" ] ; then
- deployed_uboot_dtb_binary='${DEPLOY_DIR_IMAGE}/${UBOOT_DTB_IMAGE}'
if [ "x${UBOOT_SUFFIX}" = "ximg" -o "x${UBOOT_SUFFIX}" = "xrom" ] && \
- [ -e "$deployed_uboot_dtb_binary" ]; then
- oe_runmake EXT_DTB=$deployed_uboot_dtb_binary
- install ${UBOOT_BINARY} ${DEPLOYDIR}/${UBOOT_IMAGE}
- elif [ -e "${DEPLOYDIR}/${UBOOT_NODTB_IMAGE}" -a -e "$deployed_uboot_dtb_binary" ]; then
- cd ${DEPLOYDIR}
- cat ${UBOOT_NODTB_IMAGE} $deployed_uboot_dtb_binary | tee ${B}/${CONFIG_B_PATH}/${UBOOT_BINARY} > ${UBOOT_IMAGE}
-
- if [ -n "${UBOOT_CONFIG}" ]
- then
- i=0
- j=0
- for config in ${UBOOT_MACHINE}; do
- i=$(expr $i + 1);
- for type in ${UBOOT_CONFIG}; do
- j=$(expr $j + 1);
- if [ $j -eq $i ]
- then
- cp ${UBOOT_IMAGE} ${B}/${CONFIG_B_PATH}/u-boot-$type.${UBOOT_SUFFIX}
- fi
- done
- done
+ [ -e "${UBOOT_DTB_BINARY}" ]; then
+ oe_runmake EXT_DTB="${UBOOT_DTB_SIGNED}" ${UBOOT_MAKE_TARGET}
+ if [ -n "${binary}" ]; then
+ cp ${binary} ${UBOOT_BINARYNAME}-${type}.${UBOOT_SUFFIX}
+ fi
+ elif [ -e "${UBOOT_NODTB_BINARY}" -a -e "${UBOOT_DTB_BINARY}" ]; then
+ if [ -n "${binary}" ]; then
+ cat ${UBOOT_NODTB_BINARY} ${UBOOT_DTB_SIGNED} | tee ${binary} > \
+ ${UBOOT_BINARYNAME}-${type}.${UBOOT_SUFFIX}
+ else
+ cat ${UBOOT_NODTB_BINARY} ${UBOOT_DTB_SIGNED} > ${UBOOT_BINARY}
fi
else
bbwarn "Failure while adding public key to u-boot binary. Verified boot won't be available."
@@ -151,120 +130,67 @@ concat_dtb_helper() {
fi
}
-concat_spl_dtb_helper() {
+deploy_dtb() {
+ type="$1"
- # We only deploy symlinks to the u-boot-spl.dtb,as the KERNEL_PN will
- # be responsible for deploying the real file
- if [ -e "${SPL_DIR}/${SPL_DTB_BINARY}" ] ; then
- ln -sf ${SPL_DTB_IMAGE} ${DEPLOYDIR}/${SPL_DTB_SYMLINK}
- ln -sf ${SPL_DTB_IMAGE} ${DEPLOYDIR}/${SPL_DTB_BINARY}
- fi
-
- # Concatenate the SPL nodtb binary and u-boot.dtb
- deployed_spl_dtb_binary='${DEPLOY_DIR_IMAGE}/${SPL_DTB_IMAGE}'
- if [ -e "${DEPLOYDIR}/${SPL_NODTB_IMAGE}" -a -e "$deployed_spl_dtb_binary" ] ; then
- cd ${DEPLOYDIR}
- cat ${SPL_NODTB_IMAGE} $deployed_spl_dtb_binary | tee ${B}/${CONFIG_B_PATH}/${SPL_BINARY} > ${SPL_IMAGE}
+ if [ -n "${type}" ]; then
+ uboot_dtb_binary="u-boot-${type}-${PV}-${PR}.dtb"
+ uboot_nodtb_binary="u-boot-nodtb-${type}-${PV}-${PR}.bin"
else
- bbwarn "Failure while adding public key to spl binary. Verified U-Boot boot won't be available."
+ uboot_dtb_binary="${UBOOT_DTB_IMAGE}"
+ uboot_nodtb_binary="${UBOOT_NODTB_IMAGE}"
fi
-}
-
-concat_dtb() {
- if [ "${UBOOT_SIGN_ENABLE}" = "1" -a "${PN}" = "${UBOOT_PN}" -a -n "${UBOOT_DTB_BINARY}" ]; then
- mkdir -p ${DEPLOYDIR}
- if [ -n "${UBOOT_CONFIG}" ]; then
- for config in ${UBOOT_MACHINE}; do
- CONFIG_B_PATH="$config"
- cd ${B}/$config
- concat_dtb_helper
- done
- else
- CONFIG_B_PATH=""
- cd ${B}
- concat_dtb_helper
+ if [ -e "${UBOOT_DTB_SIGNED}" ]; then
+ install -Dm644 ${UBOOT_DTB_SIGNED} ${DEPLOYDIR}/${uboot_dtb_binary}
+ if [ -n "${type}" ]; then
+ ln -sf ${uboot_dtb_binary} ${DEPLOYDIR}/${UBOOT_DTB_IMAGE}
fi
fi
-}
-concat_spl_dtb() {
- if [ "${SPL_SIGN_ENABLE}" = "1" -a "${PN}" = "${UBOOT_PN}" -a -n "${SPL_DTB_BINARY}" ]; then
- mkdir -p ${DEPLOYDIR}
- if [ -n "${UBOOT_CONFIG}" ]; then
- for config in ${UBOOT_MACHINE}; do
- CONFIG_B_PATH="$config"
- cd ${B}/$config
- concat_spl_dtb_helper
- done
- else
- CONFIG_B_PATH=""
- cd ${B}
- concat_spl_dtb_helper
+ if [ -f "${UBOOT_NODTB_BINARY}" ]; then
+ install -Dm644 ${UBOOT_DTB_BINARY} ${DEPLOYDIR}/${uboot_nodtb_binary}
+ if [ -n "${type}" ]; then
+ ln -sf ${uboot_nodtb_binary} ${DEPLOYDIR}/${UBOOT_NODTB_IMAGE}
fi
fi
}
-
-# Install UBOOT_DTB_BINARY to datadir, so that kernel can use it for
-# signing, and kernel will deploy UBOOT_DTB_BINARY after signs it.
-install_helper() {
- if [ -f "${UBOOT_DTB_BINARY}" ]; then
- # UBOOT_DTB_BINARY is a symlink to UBOOT_DTB_IMAGE, so we
- # need both of them.
- install -Dm 0644 ${UBOOT_DTB_BINARY} ${D}${datadir}/${UBOOT_DTB_IMAGE}
- ln -sf ${UBOOT_DTB_IMAGE} ${D}${datadir}/${UBOOT_DTB_BINARY}
+concat_spl_dtb() {
+ if [ -e "${SPL_DIR}/${SPL_NODTB_BINARY}" -a -e "${SPL_DIR}/${SPL_DTB_BINARY}" ] ; then
+ cat ${SPL_DIR}/${SPL_NODTB_BINARY} ${SPL_DIR}/${SPL_DTB_SIGNED} > "${SPL_BINARY}"
else
- bbwarn "${UBOOT_DTB_BINARY} not found"
+ bbwarn "Failure while adding public key to spl binary. Verified U-Boot boot won't be available."
fi
}
-# Install SPL dtb and u-boot nodtb to datadir,
-install_spl_helper() {
- if [ -f "${SPL_DIR}/${SPL_DTB_BINARY}" ]; then
- install -Dm 0644 ${SPL_DIR}/${SPL_DTB_BINARY} ${D}${datadir}/${SPL_DTB_IMAGE}
- ln -sf ${SPL_DTB_IMAGE} ${D}${datadir}/${SPL_DTB_BINARY}
- else
- bbwarn "${SPL_DTB_BINARY} not found"
- fi
- if [ -f "${UBOOT_NODTB_BINARY}" ] ; then
- install -Dm 0644 ${UBOOT_NODTB_BINARY} ${D}${datadir}/${UBOOT_NODTB_IMAGE}
- ln -sf ${UBOOT_NODTB_IMAGE} ${D}${datadir}/${UBOOT_NODTB_BINARY}
+deploy_spl_dtb() {
+ type="$1"
+
+ if [ -n "${type}" ]; then
+ spl_dtb_binary="u-boot-spl-${type}-${PV}-${PR}.dtb"
+ spl_nodtb_binary="u-boot-spl-nodtb-${type}-${PV}-${PR}.bin"
else
- bbwarn "${UBOOT_NODTB_BINARY} not found"
+ spl_dtb_binary="${SPL_DTB_IMAGE}"
+ spl_nodtb_binary="${SPL_NODTB_IMAGE}"
fi
- # We need to install a 'stub' u-boot-fitimage + its to datadir,
- # so that the KERNEL_PN can use the correct filename when
- # assembling and deploying them
- touch ${D}/${datadir}/${UBOOT_FITIMAGE_IMAGE}
- touch ${D}/${datadir}/${UBOOT_ITS_IMAGE}
-}
+ if [ -e "${SPL_DIR}/${SPL_DTB_SIGNED}" ] ; then
+ install -Dm644 ${SPL_DIR}/${SPL_DTB_SIGNED} ${DEPLOYDIR}/${spl_dtb_binary}
+ if [ -n "${type}" ]; then
+ ln -sf ${spl_dtb_binary} ${DEPLOYDIR}/${SPL_DTB_IMAGE}
+ fi
+ fi
-do_install:append() {
- if [ "${PN}" = "${UBOOT_PN}" ]; then
- if [ -n "${UBOOT_CONFIG}" ]; then
- for config in ${UBOOT_MACHINE}; do
- cd ${B}/$config
- if [ "${UBOOT_SIGN_ENABLE}" = "1" -o "${UBOOT_FITIMAGE_ENABLE}" = "1" ] && \
- [ -n "${UBOOT_DTB_BINARY}" ]; then
- install_helper
- fi
- if [ "${UBOOT_FITIMAGE_ENABLE}" = "1" -a -n "${SPL_DTB_BINARY}" ]; then
- install_spl_helper
- fi
- done
- else
- cd ${B}
- if [ "${UBOOT_SIGN_ENABLE}" = "1" -o "${UBOOT_FITIMAGE_ENABLE}" = "1" ] && \
- [ -n "${UBOOT_DTB_BINARY}" ]; then
- install_helper
- fi
- if [ "${UBOOT_FITIMAGE_ENABLE}" = "1" -a -n "${SPL_DTB_BINARY}" ]; then
- install_spl_helper
- fi
+ if [ -f "${SPL_DIR}/${SPL_NODTB_BINARY}" ] ; then
+ install -Dm644 ${SPL_DIR}/${SPL_NODTB_BINARY} ${DEPLOYDIR}/${spl_nodtb_binary}
+ if [ -n "${type}" ]; then
+ ln -sf ${spl_nodtb_binary} ${DEPLOYDIR}/${SPL_NODTB_IMAGE}
fi
fi
+
+ # For backwards compatibility...
+ install -Dm644 ${SPL_BINARY} ${DEPLOYDIR}/${SPL_IMAGE}
}
do_uboot_generate_rsa_keys() {
@@ -300,13 +226,10 @@ addtask uboot_generate_rsa_keys before do_uboot_assemble_fitimage after do_compi
# Create a ITS file for the U-boot FIT, for use when
# we want to sign it so that the SPL can verify it
uboot_fitimage_assemble() {
- uboot_its="$(basename ${STAGING_DATADIR}/u-boot-its-*)"
- uboot_bin="$(basename ${STAGING_DATADIR}/u-boot-fitImage-*)"
-
- rm -f $uboot_its $uboot_bin
+ rm -f ${UBOOT_ITS} ${UBOOT_FITIMAGE_BINARY}
# First we create the ITS script
- cat << EOF >> $uboot_its
+ cat << EOF >> ${UBOOT_ITS}
/dts-v1/;
/ {
@@ -326,7 +249,7 @@ uboot_fitimage_assemble() {
EOF
if [ "${SPL_SIGN_ENABLE}" = "1" ] ; then
- cat << EOF >> $uboot_its
+ cat << EOF >> ${UBOOT_ITS}
signature {
algo = "${UBOOT_FIT_HASH_ALG},${UBOOT_FIT_SIGN_ALG}";
key-name-hint = "${SPL_SIGN_KEYNAME}";
@@ -334,7 +257,7 @@ EOF
EOF
fi
- cat << EOF >> $uboot_its
+ cat << EOF >> ${UBOOT_ITS}
};
fdt {
description = "U-Boot FDT";
@@ -345,7 +268,7 @@ EOF
EOF
if [ "${SPL_SIGN_ENABLE}" = "1" ] ; then
- cat << EOF >> $uboot_its
+ cat << EOF >> ${UBOOT_ITS}
signature {
algo = "${UBOOT_FIT_HASH_ALG},${UBOOT_FIT_SIGN_ALG}";
key-name-hint = "${SPL_SIGN_KEYNAME}";
@@ -353,7 +276,7 @@ EOF
EOF
fi
- cat << EOF >> $uboot_its
+ cat << EOF >> ${UBOOT_ITS}
};
};
@@ -373,8 +296,8 @@ EOF
#
${UBOOT_MKIMAGE} \
${@'-D "${SPL_MKIMAGE_DTCOPTS}"' if len('${SPL_MKIMAGE_DTCOPTS}') else ''} \
- -f $uboot_its \
- $uboot_bin
+ -f ${UBOOT_ITS} \
+ ${UBOOT_FITIMAGE_BINARY}
if [ "${SPL_SIGN_ENABLE}" = "1" ] ; then
#
@@ -383,74 +306,136 @@ EOF
${UBOOT_MKIMAGE_SIGN} \
${@'-D "${SPL_MKIMAGE_DTCOPTS}"' if len('${SPL_MKIMAGE_DTCOPTS}') else ''} \
-F -k "${SPL_SIGN_KEYDIR}" \
- -K "${SPL_DTB_BINARY}" \
- -r $uboot_bin \
+ -K "${SPL_DIR}/${SPL_DTB_BINARY}" \
+ -r ${UBOOT_FITIMAGE_BINARY} \
${SPL_MKIMAGE_SIGN_ARGS}
fi
+ cp ${SPL_DIR}/${SPL_DTB_BINARY} ${SPL_DIR}/${SPL_DTB_SIGNED}
+}
+
+uboot_assemble_fitimage_helper() {
+ type="$1"
+ binary="$2"
+
+ if [ "${UBOOT_SIGN_ENABLE}" = "1" -a -n "${UBOOT_DTB_BINARY}" ] ; then
+ concat_dtb $type $binary
+ fi
+
+ if [ "${UBOOT_FITIMAGE_ENABLE}" = "1" -a -n "${SPL_DTB_BINARY}" ]; then
+ uboot_fitimage_assemble
+ fi
+
+ if [ "${SPL_SIGN_ENABLE}" = "1" -a -n "${SPL_DTB_BINARY}" ] ; then
+ concat_spl_dtb
+ fi
}
do_uboot_assemble_fitimage() {
- # This function runs in KERNEL_PN context. The reason for that is that we need to
- # support the scenario where UBOOT_SIGN_ENABLE is placing the Kernel fitImage's
- # pubkey in the u-boot.dtb file, so that we can use it when building the U-Boot
- # fitImage itself.
- if [ "${UBOOT_FITIMAGE_ENABLE}" = "1" ] && \
- [ -n "${SPL_DTB_BINARY}" -a "${PN}" = "${KERNEL_PN}" ] ; then
- if [ "${UBOOT_SIGN_ENABLE}" != "1" ]; then
- # If we're not signing the Kernel fitImage, that means
- # we need to copy the u-boot.dtb from staging ourselves
- cp -P ${STAGING_DATADIR}/u-boot*.dtb ${B}
- fi
- # As we are in the kernel context, we need to copy u-boot-spl.dtb from staging first.
- # Unfortunately, need to glob on top of ${SPL_DTB_BINARY} since _IMAGE and _SYMLINK
- # will contain U-boot's PV
- # Similarly, we need to get the filename for the 'stub' u-boot-fitimage + its in
- # staging so that we can use it for creating the image with the correct filename
- # in the KERNEL_PN context.
- # As for the u-boot.dtb (with fitimage's pubkey), it should come from the dependent
- # do_assemble_fitimage task
- cp -P ${STAGING_DATADIR}/u-boot-spl*.dtb ${B}
- cp -P ${STAGING_DATADIR}/u-boot-nodtb*.bin ${B}
- rm -rf ${B}/u-boot-fitImage-* ${B}/u-boot-its-*
+ if [ "${UBOOT_SIGN_ENABLE}" = "1" ] ; then
+ cp "${STAGING_DIR_HOST}/sysroot-only/fitImage" "${B}/fitImage-linux"
+ fi
+
+ if [ -n "${UBOOT_CONFIG}" ]; then
+ unset i j k
+ for config in ${UBOOT_MACHINE}; do
+ i=$(expr $i + 1);
+ for type in ${UBOOT_CONFIG}; do
+ j=$(expr $j + 1);
+ if [ $j -eq $i ]; then
+ break;
+ fi
+ done
+
+ for binary in ${UBOOT_BINARIES}; do
+ k=$(expr $j + 1);
+ if [ $k -eq $i ]; then
+ break;
+ fi
+ done
+
+ cd ${B}/${config}
+ uboot_assemble_fitimage_helper ${type} ${binary}
+ done
+ else
cd ${B}
- uboot_fitimage_assemble
+ uboot_assemble_fitimage_helper "" ${UBOOT_BINARY}
fi
}
-addtask uboot_assemble_fitimage before do_deploy after do_compile
+addtask uboot_assemble_fitimage before do_install do_deploy after do_compile
-do_deploy:prepend:pn-${UBOOT_PN}() {
- if [ "${UBOOT_SIGN_ENABLE}" = "1" -a -n "${UBOOT_DTB_BINARY}" ] ; then
- concat_dtb
+deploy_helper() {
+ type="$1"
+
+ if [ "${UBOOT_SIGN_ENABLE}" = "1" -a -n "${UBOOT_DTB_SIGNED}" ] ; then
+ deploy_dtb $type
fi
- if [ "${UBOOT_FITIMAGE_ENABLE}" = "1" ] ; then
- # Deploy the u-boot-nodtb binary and symlinks...
- if [ -f "${SPL_DIR}/${SPL_NODTB_BINARY}" ] ; then
- echo "Copying u-boot-nodtb binary..."
- install -m 0644 ${SPL_DIR}/${SPL_NODTB_BINARY} ${DEPLOYDIR}/${SPL_NODTB_IMAGE}
- ln -sf ${SPL_NODTB_IMAGE} ${DEPLOYDIR}/${SPL_NODTB_SYMLINK}
- ln -sf ${SPL_NODTB_IMAGE} ${DEPLOYDIR}/${SPL_NODTB_BINARY}
+ if [ "${UBOOT_FITIMAGE_ENABLE}" = "1" -a -n "${SPL_DTB_BINARY}" ]; then
+ if [ -n "${type}" ]; then
+ uboot_its_image="u-boot-its-${type}-${PV}-${PR}"
+ uboot_fitimage_image="u-boot-fitImage-${type}-${PV}-${PR}"
+ else
+ uboot_its_image="${UBOOT_ITS_IMAGE}"
+ uboot_fitimage_image="${UBOOT_FITIMAGE_IMAGE}"
fi
+ install -Dm644 ${UBOOT_FITIMAGE_BINARY} ${DEPLOYDIR}/$uboot_fitimage_image
+ install -Dm644 ${UBOOT_ITS} ${DEPLOYDIR}/$uboot_its_image
- # We only deploy the symlinks to the uboot-fitImage and uboot-its
- # images, as the KERNEL_PN will take care of deploying the real file
- ln -sf ${UBOOT_FITIMAGE_IMAGE} ${DEPLOYDIR}/${UBOOT_FITIMAGE_BINARY}
- ln -sf ${UBOOT_FITIMAGE_IMAGE} ${DEPLOYDIR}/${UBOOT_FITIMAGE_SYMLINK}
+ if [ -n "${type}" ]; then
+ ln -sf $uboot_its_image ${DEPLOYDIR}/${UBOOT_ITS_IMAGE}
+ ln -sf $uboot_fitimage_image ${DEPLOYDIR}/${UBOOT_FITIMAGE_IMAGE}
+ fi
+ fi
+
+ if [ "${SPL_SIGN_ENABLE}" = "1" -a -n "${SPL_DTB_SIGNED}" ] ; then
+ deploy_spl_dtb $type
+ fi
+}
+
+do_deploy:prepend() {
+ if [ -n "${UBOOT_CONFIG}" ]; then
+ unset i j k
+ for config in ${UBOOT_MACHINE}; do
+ i=$(expr $i + 1);
+ for type in ${UBOOT_CONFIG}; do
+ j=$(expr $j + 1);
+ if [ $j -eq $i ]; then
+ cd ${B}/${config}
+ deploy_helper ${type}
+ fi
+ done
+ done
+ else
+ cd ${B}
+ deploy_helper ""
+ fi
+
+ if [ "${UBOOT_SIGN_ENABLE}" = "1" -a -n "${UBOOT_DTB_BINARY}" ] ; then
+ ln -sf ${UBOOT_DTB_IMAGE} ${DEPLOYDIR}/${UBOOT_DTB_BINARY}
+ ln -sf ${UBOOT_DTB_IMAGE} ${DEPLOYDIR}/${UBOOT_DTB_SYMLINK}
+ ln -sf ${UBOOT_NODTB_IMAGE} ${DEPLOYDIR}/${UBOOT_NODTB_SYMLINK}
+ ln -sf ${UBOOT_NODTB_IMAGE} ${DEPLOYDIR}/${UBOOT_NODTB_BINARY}
+ fi
+
+ if [ "${UBOOT_FITIMAGE_ENABLE}" = "1" ] ; then
ln -sf ${UBOOT_ITS_IMAGE} ${DEPLOYDIR}/${UBOOT_ITS}
ln -sf ${UBOOT_ITS_IMAGE} ${DEPLOYDIR}/${UBOOT_ITS_SYMLINK}
+ ln -sf ${UBOOT_FITIMAGE_IMAGE} ${DEPLOYDIR}/${UBOOT_FITIMAGE_BINARY}
+ ln -sf ${UBOOT_FITIMAGE_IMAGE} ${DEPLOYDIR}/${UBOOT_FITIMAGE_SYMLINK}
fi
if [ "${SPL_SIGN_ENABLE}" = "1" -a -n "${SPL_DTB_BINARY}" ] ; then
- concat_spl_dtb
+ ln -sf ${SPL_DTB_IMAGE} ${DEPLOYDIR}/${SPL_DTB_SYMLINK}
+ ln -sf ${SPL_DTB_IMAGE} ${DEPLOYDIR}/${SPL_DTB_BINARY}
+ ln -sf ${SPL_NODTB_IMAGE} ${DEPLOYDIR}/${SPL_NODTB_SYMLINK}
+ ln -sf ${SPL_NODTB_IMAGE} ${DEPLOYDIR}/${SPL_NODTB_BINARY}
fi
-
-
}
-do_deploy:append:pn-${UBOOT_PN}() {
+do_deploy:append() {
# If we're creating a u-boot fitImage, point u-boot.bin
# symlink since it might get used by image recipes
if [ "${UBOOT_FITIMAGE_ENABLE}" = "1" ] ; then
@@ -458,27 +443,3 @@ do_deploy:append:pn-${UBOOT_PN}() {
ln -sf ${UBOOT_FITIMAGE_IMAGE} ${DEPLOYDIR}/${UBOOT_SYMLINK}
fi
}
-
-python () {
- if ( (d.getVar('UBOOT_SIGN_ENABLE') == '1'
- or d.getVar('UBOOT_FITIMAGE_ENABLE') == '1')
- and d.getVar('PN') == d.getVar('UBOOT_PN')
- and d.getVar('UBOOT_DTB_BINARY')):
-
- # Make "bitbake u-boot -cdeploy" deploys the signed u-boot.dtb
- # and/or the U-Boot fitImage
- d.appendVarFlag('do_deploy', 'depends', ' %s:do_deploy' % d.getVar('KERNEL_PN'))
-
- if d.getVar('UBOOT_FITIMAGE_ENABLE') == '1' and d.getVar('PN') == d.getVar('KERNEL_PN'):
- # As the U-Boot fitImage is created by the KERNEL_PN, we need
- # to make sure that the u-boot-spl.dtb and u-boot-spl-nodtb.bin
- # files are in the staging dir for it's use
- d.appendVarFlag('do_uboot_assemble_fitimage', 'depends', ' %s:do_populate_sysroot' % d.getVar('UBOOT_PN'))
-
- # If the Kernel fitImage is being signed, we need to
- # create the U-Boot fitImage after it
- if d.getVar('UBOOT_SIGN_ENABLE') == '1':
- d.appendVarFlag('do_uboot_assemble_fitimage', 'depends', ' %s:do_assemble_fitimage' % d.getVar('KERNEL_PN'))
- d.appendVarFlag('do_uboot_assemble_fitimage', 'depends', ' %s:do_assemble_fitimage_initramfs' % d.getVar('KERNEL_PN'))
-
-}