aboutsummaryrefslogtreecommitdiffstats
path: root/recipes/obsolete/linux/linux-kexecboot-2.6.24/tosa/0011-MMC-driver-for-TMIO-devices.patch
diff options
context:
space:
mode:
Diffstat (limited to 'recipes/obsolete/linux/linux-kexecboot-2.6.24/tosa/0011-MMC-driver-for-TMIO-devices.patch')
-rw-r--r--recipes/obsolete/linux/linux-kexecboot-2.6.24/tosa/0011-MMC-driver-for-TMIO-devices.patch891
1 files changed, 891 insertions, 0 deletions
diff --git a/recipes/obsolete/linux/linux-kexecboot-2.6.24/tosa/0011-MMC-driver-for-TMIO-devices.patch b/recipes/obsolete/linux/linux-kexecboot-2.6.24/tosa/0011-MMC-driver-for-TMIO-devices.patch
new file mode 100644
index 0000000000..6ff752d1ff
--- /dev/null
+++ b/recipes/obsolete/linux/linux-kexecboot-2.6.24/tosa/0011-MMC-driver-for-TMIO-devices.patch
@@ -0,0 +1,891 @@
+From b358a64c1fdd1eb80da57f919c893d910db95e37 Mon Sep 17 00:00:00 2001
+From: Ian Molton <spyro@f2s.com>
+Date: Sat, 29 Dec 2007 15:26:19 +0000
+Subject: [PATCH 11/64] MMC driver for TMIO devices
+
+---
+ drivers/mmc/host/Kconfig | 6 +
+ drivers/mmc/host/Makefile | 1 +
+ drivers/mmc/host/tmio_mmc.c | 633 +++++++++++++++++++++++++++++++++++++++++++
+ drivers/mmc/host/tmio_mmc.h | 205 ++++++++++++++
+ 4 files changed, 845 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/mmc/host/tmio_mmc.c
+ create mode 100644 drivers/mmc/host/tmio_mmc.h
+
+diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
+index 5fef678..f8f9b7e 100644
+--- a/drivers/mmc/host/Kconfig
++++ b/drivers/mmc/host/Kconfig
+@@ -130,3 +130,9 @@ config MMC_SPI
+
+ If unsure, or if your system has no SPI master driver, say N.
+
++config MMC_TMIO
++ tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support"
++ depends on MMC
++ help
++ This provides support for the SD/MMC cell found in TC6393XB,
++ T7L66XB and also ipaq ASIC3
+diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
+index 3877c87..7ac956b 100644
+--- a/drivers/mmc/host/Makefile
++++ b/drivers/mmc/host/Makefile
+@@ -17,4 +17,5 @@ obj-$(CONFIG_MMC_OMAP) += omap.o
+ obj-$(CONFIG_MMC_AT91) += at91_mci.o
+ obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
+ obj-$(CONFIG_MMC_SPI) += mmc_spi.o
++obj-$(CONFIG_MMC_TMIO) += tmio_mmc.o
+
+diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
+new file mode 100644
+index 0000000..735c386
+--- /dev/null
++++ b/drivers/mmc/host/tmio_mmc.c
+@@ -0,0 +1,633 @@
++/*
++ * linux/drivers/mmc/tmio_mmc.c
++ *
++ * Copyright (C) 2004 Ian Molton
++ * Copyright (C) 2007 Ian Molton
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * Driver for the MMC / SD / SDIO cell found in:
++ *
++ * TC6393XB TC6391XB TC6387XB T7L66XB
++ *
++ * This driver draws mainly on scattered spec sheets, Reverse engineering
++ * of the toshiba e800 SD driver and some parts of the 2.4 ASIC3 driver (4 bit
++ * support). (Further 4 bit support from a later datasheet).
++ *
++ * TODO:
++ * Investigate using a workqueue for PIO transfers
++ * Eliminate FIXMEs
++ * SDIO support
++ * Better Power management
++ * Handle MMC errors better
++ * double buffer support
++ *
++ */
++#include <linux/module.h>
++#include <linux/irq.h>
++#include <linux/device.h>
++#include <linux/delay.h>
++#include <linux/mmc/mmc.h>
++#include <linux/mmc/host.h>
++#include <linux/mfd-core.h>
++#include <linux/mfd/tmio.h>
++
++#include "tmio_mmc.h"
++
++/*
++ * Fixme - documentation conflicts on what the clock values are for the
++ * various dividers.
++ * One document I have says that its a divisor of a 24MHz clock, another 33.
++ * This probably depends on HCLK for a given platform, so we may need to
++ * require HCLK be passed to us from the MFD core.
++ *
++ */
++
++static void tmio_mmc_set_clock (struct tmio_mmc_host *host, int new_clock) {
++ struct tmio_mmc_cnf __iomem *cnf = host->cnf;
++ struct tmio_mmc_ctl __iomem *ctl = host->ctl;
++ u32 clk = 0, clock;
++
++ if (new_clock) {
++ for(clock = 46875, clk = 0x100; new_clock >= (clock<<1); ){
++ clock <<= 1;
++ clk >>= 1;
++ }
++ if(clk & 0x1)
++ clk = 0x20000;
++
++ clk >>= 2;
++ if(clk & 0x8000) /* For full speed we disable the divider. */
++ writeb(0, &cnf->sd_clk_mode);
++ else
++ writeb(1, &cnf->sd_clk_mode);
++ clk |= 0x100;
++ }
++
++ writew(clk, &ctl->sd_card_clk_ctl);
++}
++
++static void tmio_mmc_clk_stop (struct tmio_mmc_host *host) {
++ struct tmio_mmc_ctl __iomem *ctl = host->ctl;
++
++ writew(0x0000, &ctl->clk_and_wait_ctl);
++ msleep(10);
++ writew(readw(&ctl->sd_card_clk_ctl) & ~0x0100, &ctl->sd_card_clk_ctl);
++ msleep(10);
++}
++
++static void tmio_mmc_clk_start (struct tmio_mmc_host *host) {
++ struct tmio_mmc_ctl __iomem *ctl = host->ctl;
++
++ writew(readw(&ctl->sd_card_clk_ctl) | 0x0100, &ctl->sd_card_clk_ctl);
++ msleep(10);
++ writew(0x0100, &ctl->clk_and_wait_ctl);
++ msleep(10);
++}
++
++static void reset(struct tmio_mmc_host *host) {
++ struct tmio_mmc_ctl __iomem *ctl = host->ctl;
++
++ /* FIXME - should we set stop clock reg here */
++ writew(0x0000, &ctl->reset_sd);
++ writew(0x0000, &ctl->reset_sdio);
++ msleep(10);
++ writew(0x0001, &ctl->reset_sd);
++ writew(0x0001, &ctl->reset_sdio);
++ msleep(10);
++}
++
++static void
++tmio_mmc_finish_request(struct tmio_mmc_host *host)
++{
++ struct mmc_request *mrq = host->mrq;
++
++ host->mrq = NULL;
++ host->cmd = NULL;
++ host->data = NULL;
++
++ mmc_request_done(host->mmc, mrq);
++}
++
++/* These are the bitmasks the tmio chip requires to implement the MMC response
++ * types. Note that R1 and R6 are the same in this scheme. */
++#define APP_CMD 0x0040
++#define RESP_NONE 0x0300
++#define RESP_R1 0x0400
++#define RESP_R1B 0x0500
++#define RESP_R2 0x0600
++#define RESP_R3 0x0700
++#define DATA_PRESENT 0x0800
++#define TRANSFER_READ 0x1000
++#define TRANSFER_MULTI 0x2000
++#define SECURITY_CMD 0x4000
++
++static void
++tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd)
++{
++ struct tmio_mmc_ctl __iomem *ctl = host->ctl;
++ struct mmc_data *data = host->data;
++ int c = cmd->opcode;
++
++ if(cmd->opcode == MMC_STOP_TRANSMISSION) {
++ writew(0x001, &ctl->stop_internal_action);
++ return;
++ }
++
++ switch(mmc_resp_type(cmd)) {
++ case MMC_RSP_NONE: c |= RESP_NONE; break;
++ case MMC_RSP_R1: c |= RESP_R1; break;
++ case MMC_RSP_R1B: c |= RESP_R1B; break;
++ case MMC_RSP_R2: c |= RESP_R2; break;
++ case MMC_RSP_R3: c |= RESP_R3; break;
++ default:
++ DBG("Unknown response type %d\n", mmc_resp_type(cmd));
++ }
++
++ host->cmd = cmd;
++
++/* FIXME - this seems to be ok comented out but the spec suggest this bit should
++ * be set when issuing app commands.
++ * if(cmd->flags & MMC_FLAG_ACMD)
++ * c |= APP_CMD;
++ */
++ if(data) {
++ c |= DATA_PRESENT;
++ if(data->blocks > 1) {
++ writew(0x100, &ctl->stop_internal_action);
++ c |= TRANSFER_MULTI;
++ }
++ if(data->flags & MMC_DATA_READ)
++ c |= TRANSFER_READ;
++ }
++
++ enable_mmc_irqs(ctl, TMIO_MASK_CMD);
++
++ /* Fire off the command */
++ tmio_iowrite32(cmd->arg, ctl->arg_reg);
++ writew(c, &ctl->sd_cmd);
++}
++
++/* This chip always returns (at least?) as much data as you ask for.
++ * Im unsure what happens if you ask for less than a block. This should be
++ * looked into to ensure that a funny length read doesnt hose the controller.
++ *
++ * FIXME - this chip cannot do 1 and 2 byte data requests in 4 bit mode
++ */
++static inline void tmio_mmc_pio_irq(struct tmio_mmc_host *host) {
++ struct tmio_mmc_ctl __iomem *ctl = host->ctl;
++ struct mmc_data *data = host->data;
++ unsigned short *buf;
++ unsigned int count;
++ unsigned long flags;
++
++ if(!data){
++ DBG("Spurious PIO IRQ\n");
++ return;
++ }
++
++ buf = (unsigned short *)(tmio_mmc_kmap_atomic(host, &flags) +
++ host->sg_off);
++
++ /* Ensure we dont read more than one block. The chip will interrupt us
++ * When the next block is available.
++ * FIXME - this is probably not true now IRQ handling is fixed
++ */
++ count = host->sg_ptr->length - host->sg_off;
++ if(count > data->blksz)
++ count = data->blksz;
++
++ DBG("count: %08x offset: %08x flags %08x\n",
++ count, host->sg_off, data->flags);
++
++ /* Transfer the data */
++ if(data->flags & MMC_DATA_READ)
++ readsw(&ctl->sd_data_port[0], buf, count >> 1);
++ else
++ writesw(&ctl->sd_data_port[0], buf, count >> 1);
++
++ host->sg_off += count;
++
++ tmio_mmc_kunmap_atomic(host, &flags);
++
++ if(host->sg_off == host->sg_ptr->length)
++ tmio_mmc_next_sg(host);
++
++ return;
++}
++
++static inline void tmio_mmc_data_irq(struct tmio_mmc_host *host) {
++ struct tmio_mmc_ctl __iomem *ctl = host->ctl;
++ struct mmc_data *data = host->data;
++
++ host->data = NULL;
++
++ if(!data){
++ DBG("Spurious data end IRQ\n");
++ return;
++ }
++
++ /* FIXME - return correct transfer count on errors */
++ if (!data->error)
++ data->bytes_xfered = data->blocks * data->blksz;
++ else
++ data->bytes_xfered = 0;
++
++ DBG("Completed data request\n");
++
++ /*FIXME - other drivers allow an optional stop command of any given type
++ * which we dont do, as the chip can auto generate them.
++ * Perhaps we can be smarter about when to use auto CMD12 and
++ * only issue the auto request when we know this is the desired
++ * stop command, allowing fallback to the stop command the
++ * upper layers expect. For now, we do what works.
++ */
++
++ writew(0x000, &ctl->stop_internal_action);
++
++ if(data->flags & MMC_DATA_READ)
++ disable_mmc_irqs(ctl, TMIO_MASK_READOP);
++ else
++ disable_mmc_irqs(ctl, TMIO_MASK_WRITEOP);
++
++ tmio_mmc_finish_request(host);
++}
++
++static inline void tmio_mmc_cmd_irq(struct tmio_mmc_host *host, unsigned int stat) {
++ struct tmio_mmc_ctl __iomem *ctl = host->ctl;
++ struct mmc_command *cmd = host->cmd;
++
++ if(!host->cmd) {
++ DBG("Spurious CMD irq\n");
++ return;
++ }
++
++ host->cmd = NULL;
++
++ /* This controller is sicker than the PXA one. not only do we need to
++ * drop the top 8 bits of the first response word, we also need to
++ * modify the order of the response for short response command types.
++ */
++
++ /* FIXME - this works but readl is wrong and will break on asic3... */
++ cmd->resp[3] = tmio_ioread32(&ctl->response[0]);
++ cmd->resp[2] = tmio_ioread32(&ctl->response[2]);
++ cmd->resp[1] = tmio_ioread32(&ctl->response[4]);
++ cmd->resp[0] = tmio_ioread32(&ctl->response[6]);
++
++ if(cmd->flags & MMC_RSP_136) {
++ cmd->resp[0] = (cmd->resp[0] <<8) | (cmd->resp[1] >>24);
++ cmd->resp[1] = (cmd->resp[1] <<8) | (cmd->resp[2] >>24);
++ cmd->resp[2] = (cmd->resp[2] <<8) | (cmd->resp[3] >>24);
++ cmd->resp[3] <<= 8;
++ }
++ else if(cmd->flags & MMC_RSP_R3) {
++ cmd->resp[0] = cmd->resp[3];
++ }
++
++ if (stat & TMIO_STAT_CMDTIMEOUT)
++ cmd->error = -ETIMEDOUT;
++ else if (stat & TMIO_STAT_CRCFAIL && cmd->flags & MMC_RSP_CRC)
++ cmd->error = -EILSEQ;
++
++ /* If there is data to handle we enable data IRQs here, and
++ * we will ultimatley finish the request in the data_end handler.
++ * If theres no data or we encountered an error, finish now.
++ */
++ if(host->data && !cmd->error){
++ if(host->data->flags & MMC_DATA_READ)
++ enable_mmc_irqs(ctl, TMIO_MASK_READOP);
++ else
++ enable_mmc_irqs(ctl, TMIO_MASK_WRITEOP);
++ }
++ else {
++ tmio_mmc_finish_request(host);
++ }
++
++ return;
++}
++
++
++static irqreturn_t tmio_mmc_irq(int irq, void *devid)
++{
++ struct tmio_mmc_host *host = devid;
++ struct tmio_mmc_ctl __iomem *ctl = host->ctl;
++ unsigned int ireg, irq_mask, status;
++
++ DBG("MMC IRQ begin\n");
++
++ status = tmio_ioread32(ctl->status);
++ irq_mask = tmio_ioread32(ctl->irq_mask);
++ ireg = status & TMIO_MASK_IRQ & ~irq_mask;
++
++#ifdef CONFIG_MMC_DEBUG
++ debug_status(status);
++ debug_status(ireg);
++#endif
++ if (!ireg) {
++ disable_mmc_irqs(ctl, status & ~irq_mask);
++#ifdef CONFIG_MMC_DEBUG
++ WARN("tmio_mmc: Spurious MMC irq, disabling! 0x%08x 0x%08x 0x%08x\n", status, irq_mask, ireg);
++ debug_status(status);
++#endif
++ goto out;
++ }
++
++ while (ireg) {
++ /* Card insert / remove attempts */
++ if (ireg & (TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE)){
++ ack_mmc_irqs(ctl, TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE);
++ mmc_detect_change(host->mmc,0);
++ }
++
++ /* CRC and other errors */
++/* if (ireg & TMIO_STAT_ERR_IRQ)
++ * handled |= tmio_error_irq(host, irq, stat);
++ */
++
++ /* Command completion */
++ if (ireg & TMIO_MASK_CMD) {
++ tmio_mmc_cmd_irq(host, status);
++ ack_mmc_irqs(ctl, TMIO_MASK_CMD);
++ }
++
++ /* Data transfer */
++ if (ireg & (TMIO_STAT_RXRDY | TMIO_STAT_TXRQ)) {
++ ack_mmc_irqs(ctl, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ);
++ tmio_mmc_pio_irq(host);
++ }
++
++ /* Data transfer completion */
++ if (ireg & TMIO_STAT_DATAEND) {
++ tmio_mmc_data_irq(host);
++ ack_mmc_irqs(ctl, TMIO_STAT_DATAEND);
++ }
++
++ /* Check status - keep going until we've handled it all */
++ status = tmio_ioread32(ctl->status);
++ irq_mask = tmio_ioread32(ctl->irq_mask);
++ ireg = status & TMIO_MASK_IRQ & ~irq_mask;
++
++#ifdef CONFIG_MMC_DEBUG
++ DBG("Status at end of loop: %08x\n", status);
++ debug_status(status);
++#endif
++ }
++ DBG("MMC IRQ end\n");
++
++out:
++ return IRQ_HANDLED;
++}
++
++static void tmio_mmc_start_data(struct tmio_mmc_host *host, struct mmc_data *data)
++{
++ struct tmio_mmc_ctl __iomem *ctl = host->ctl;
++
++ DBG("setup data transfer: blocksize %08x nr_blocks %d\n",
++ data->blksz, data->blocks);
++
++ tmio_mmc_init_sg(host, data);
++ host->data = data;
++
++ /* Set transfer length / blocksize */
++ writew(data->blksz, &ctl->sd_xfer_len);
++ writew(data->blocks, &ctl->xfer_blk_count);
++}
++
++/* Process requests from the MMC layer */
++static void tmio_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
++{
++ struct tmio_mmc_host *host = mmc_priv(mmc);
++
++ WARN_ON(host->mrq != NULL);
++
++ host->mrq = mrq;
++
++ /* If we're performing a data request we need to setup some
++ extra information */
++ if (mrq->data)
++ tmio_mmc_start_data(host, mrq->data);
++
++ tmio_mmc_start_command(host, mrq->cmd);
++}
++
++/* Set MMC clock / power.
++ * Note: This controller uses a simple divider scheme therefore it cannot
++ * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as
++ * MMC wont run that fast, it has to be clocked at 12MHz which is the next
++ * slowest setting.
++ */
++static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
++{
++ struct tmio_mmc_host *host = mmc_priv(mmc);
++ struct tmio_mmc_cnf __iomem *cnf = host->cnf;
++ struct tmio_mmc_ctl __iomem *ctl = host->ctl;
++
++ if(ios->clock)
++ tmio_mmc_set_clock (host, ios->clock);
++
++ /* Power sequence - OFF -> ON -> UP */
++ switch (ios->power_mode) {
++ case MMC_POWER_OFF:
++ writeb(0x00, &cnf->pwr_ctl[1]); /* power down SD bus */
++ tmio_mmc_clk_stop(host);
++ break;
++ case MMC_POWER_ON:
++ writeb(0x02, &cnf->pwr_ctl[1]); /* power up SD bus */
++ break;
++ case MMC_POWER_UP:
++ tmio_mmc_clk_start(host); /* start bus clock */
++ break;
++ }
++
++ switch (ios->bus_width) {
++ case MMC_BUS_WIDTH_1:
++ writew(0x80e0, &ctl->sd_mem_card_opt);
++ break;
++ case MMC_BUS_WIDTH_4:
++ writew(0x00e0, &ctl->sd_mem_card_opt);
++ break;
++ }
++
++ /* Potentially we may need a 140us pause here. FIXME */
++ udelay(140);
++}
++
++static int tmio_mmc_get_ro(struct mmc_host *mmc) {
++ struct tmio_mmc_host *host = mmc_priv(mmc);
++ struct tmio_mmc_ctl __iomem *ctl = host->ctl;
++
++ return (readw(&ctl->status[0]) & TMIO_STAT_WRPROTECT)?0:1;
++}
++
++static struct mmc_host_ops tmio_mmc_ops = {
++ .request = tmio_mmc_request,
++ .set_ios = tmio_mmc_set_ios,
++ .get_ro = tmio_mmc_get_ro,
++};
++
++static int tmio_mmc_suspend(struct platform_device *dev, pm_message_t state) {
++ struct mfd_cell *cell = mfd_get_cell(dev);
++ struct mmc_host *mmc = platform_get_drvdata(dev);
++ int ret;
++
++ ret = mmc_suspend_host(mmc, state);
++
++ /* Tell MFD core it can disable us now.*/
++ if(!ret && cell->disable)
++ cell->disable(dev);
++
++ return ret;
++}
++
++static int tmio_mmc_resume(struct platform_device *dev) {
++ struct mfd_cell *cell = mfd_get_cell(dev);
++ struct mmc_host *mmc = platform_get_drvdata(dev);
++ struct tmio_mmc_host *host = mmc_priv(mmc);
++ struct tmio_mmc_cnf __iomem *cnf = host->cnf;
++
++ /* Enable the MMC/SD Control registers */
++ writew(SDCREN, &cnf->cmd);
++ writel(dev->resource[0].start & 0xfffe, &cnf->ctl_base);
++
++ /* Tell the MFD core we are ready to be enabled */
++ if(cell->enable)
++ cell->enable(dev);
++
++ mmc_resume_host(mmc);
++
++ return 0;
++}
++
++static int __devinit tmio_mmc_probe(struct platform_device *dev)
++{
++ struct mfd_cell *cell = mfd_get_cell(dev);
++ struct tmio_mmc_cnf __iomem *cnf;
++ struct tmio_mmc_ctl __iomem *ctl;
++ struct tmio_mmc_host *host;
++ struct mmc_host *mmc;
++ int ret = -ENOMEM;
++
++ mmc = mmc_alloc_host(sizeof(struct tmio_mmc_host), &dev->dev);
++ if (!mmc) {
++ goto out;
++ }
++
++ host = mmc_priv(mmc);
++ host->mmc = mmc;
++ platform_set_drvdata(dev, mmc); /* Used so we can de-init safely. */
++
++ host->cnf = cnf = ioremap((unsigned long)dev->resource[1].start,
++ (unsigned long)dev->resource[1].end -
++ (unsigned long)dev->resource[1].start);
++ if(!host->cnf)
++ goto host_free;
++
++ host->ctl = ctl = ioremap((unsigned long)dev->resource[0].start,
++ (unsigned long)dev->resource[0].end -
++ (unsigned long)dev->resource[0].start);
++ if (!host->ctl) {
++ goto unmap_cnf;
++ }
++
++ mmc->ops = &tmio_mmc_ops;
++ mmc->caps = MMC_CAP_4_BIT_DATA;
++ mmc->f_min = 46875;
++ mmc->f_max = 24000000;
++ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
++
++ /* Enable the MMC/SD Control registers */
++ writew(SDCREN, &cnf->cmd);
++ writel(dev->resource[0].start & 0xfffe, &cnf->ctl_base);
++
++ /* Tell the MFD core we are ready to be enabled */
++ if(cell->enable)
++ cell->enable(dev);
++
++ writeb(0x01,&cnf->pwr_ctl[2]); /* Disable SD power during suspend */
++ writeb(0x1f, &cnf->stop_clk_ctl); /* Route clock to SDIO??? FIXME */
++ writeb(0x0, &cnf->pwr_ctl[1]); /* Power down SD bus*/
++ tmio_mmc_clk_stop(host); /* Stop bus clock */
++ reset(host); /* Reset MMC HC */
++
++ host->irq = (unsigned long)dev->resource[2].start;
++ ret = request_irq(host->irq, tmio_mmc_irq, IRQF_DISABLED, "tmio-mmc", host);
++ if (ret){
++ ret = -ENODEV;
++ DBG("Failed to allocate IRQ.\n");
++ goto unmap_ctl;
++ }
++ set_irq_type(host->irq, IRQT_FALLING);
++
++ mmc_add_host(mmc);
++
++ printk(KERN_INFO "%s at 0x%08lx irq %d\n", mmc_hostname(host->mmc),
++ (unsigned long)host->ctl, host->irq);
++
++ /* Lets unmask the IRQs we want to know about */
++ disable_mmc_irqs(ctl, TMIO_MASK_ALL);
++ enable_mmc_irqs(ctl, TMIO_MASK_IRQ);
++
++ return 0;
++
++unmap_ctl:
++ iounmap(host->ctl);
++unmap_cnf:
++ iounmap(host->cnf);
++host_free:
++ mmc_free_host(mmc);
++out:
++ return ret;
++}
++
++static int __devexit tmio_mmc_remove(struct platform_device *dev)
++{
++ struct mmc_host *mmc = platform_get_drvdata(dev);
++
++ platform_set_drvdata(dev, NULL);
++
++ if (mmc) {
++ struct tmio_mmc_host *host = mmc_priv(mmc);
++ mmc_remove_host(mmc);
++ free_irq(host->irq, host);
++ /* FIXME - we might want to consider stopping the chip here. */
++ iounmap(host->ctl);
++ iounmap(host->cnf);
++ mmc_free_host(mmc); /* FIXME - why does this call hang ? */
++ }
++ return 0;
++}
++
++/* ------------------- device registration ----------------------- */
++
++static struct platform_driver tmio_mmc_driver = {
++ .driver = {
++ .name = "tmio-mmc",
++ },
++ .probe = tmio_mmc_probe,
++ .remove = __devexit_p(tmio_mmc_remove),
++#ifdef CONFIG_PM
++ .suspend = tmio_mmc_suspend,
++ .resume = tmio_mmc_resume,
++#endif
++};
++
++
++static int __init tmio_mmc_init(void)
++{
++ return platform_driver_register (&tmio_mmc_driver);
++}
++
++static void __exit tmio_mmc_exit(void)
++{
++ platform_driver_unregister (&tmio_mmc_driver);
++}
++
++module_init(tmio_mmc_init);
++module_exit(tmio_mmc_exit);
++
++MODULE_DESCRIPTION("Toshiba TMIO SD/MMC driver");
++MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
++MODULE_LICENSE("GPLv2");
+diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
+new file mode 100644
+index 0000000..d4d9f8f
+--- /dev/null
++++ b/drivers/mmc/host/tmio_mmc.h
+@@ -0,0 +1,205 @@
++/* Definitons for use with the tmio_mmc.c
++ *
++ * (c) 2005 Ian Molton <spyro@f2s.com>
++ * (c) 2007 Ian Molton <spyro@f2s.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++struct tmio_mmc_cnf {
++ u8 x00[4];
++ u16 cmd;
++ u8 x01[10];
++ u32 ctl_base;
++ u8 x02[41];
++ u8 int_pin;
++ u8 x03[2];
++ u8 stop_clk_ctl;
++ u8 gclk_ctl; /* Gated Clock Control */
++ u8 sd_clk_mode; /* 0x42 */
++ u8 x04;
++ u16 pin_status;
++ u8 x05[2];
++ u8 pwr_ctl[3];
++ u8 x06;
++ u8 card_detect_mode;
++ u8 x07[3];
++ u8 sd_slot;
++ u8 x08[159];
++ u8 ext_gclk_ctl_1; /* Extended Gated Clock Control 1 */
++ u8 ext_gclk_ctl_2; /* Extended Gated Clock Control 2 */
++ u8 x09[7];
++ u8 ext_gclk_ctl_3; /* Extended Gated Clock Control 3 */
++ u8 sd_led_en_1;
++ u8 x10[3];
++ u8 sd_led_en_2;
++ u8 x11;
++} __attribute__ ((packed));
++
++#define SDCREN 0x2 /* Enable access to MMC CTL regs. (flag in COMMAND_REG)*/
++
++struct tmio_mmc_ctl {
++ u16 sd_cmd;
++ u16 x00;
++ u16 arg_reg[2];
++ u16 stop_internal_action;
++ u16 xfer_blk_count;
++ u16 response[8];
++ u16 status[2];
++ u16 irq_mask[2];
++ u16 sd_card_clk_ctl;
++ u16 sd_xfer_len;
++ u16 sd_mem_card_opt;
++ u16 x01;
++ u16 sd_error_detail_status[2];
++ u16 sd_data_port[2];
++ u16 transaction_ctl;
++ u16 x02[85];
++ u16 reset_sd;
++ u16 x03[15];
++ u16 sdio_regs[28];
++ u16 clk_and_wait_ctl;
++ u16 x04[83];
++ u16 reset_sdio;
++ u16 x05[15];
++} __attribute__ ((packed));
++
++/* Definitions for values the CTRL_STATUS register can take. */
++#define TMIO_STAT_CMDRESPEND 0x00000001
++#define TMIO_STAT_DATAEND 0x00000004
++#define TMIO_STAT_CARD_REMOVE 0x00000008
++#define TMIO_STAT_CARD_INSERT 0x00000010
++#define TMIO_STAT_SIGSTATE 0x00000020
++#define TMIO_STAT_WRPROTECT 0x00000080
++#define TMIO_STAT_CARD_REMOVE_A 0x00000100
++#define TMIO_STAT_CARD_INSERT_A 0x00000200
++#define TMIO_STAT_SIGSTATE_A 0x00000400
++#define TMIO_STAT_CMD_IDX_ERR 0x00010000
++#define TMIO_STAT_CRCFAIL 0x00020000
++#define TMIO_STAT_STOPBIT_ERR 0x00040000
++#define TMIO_STAT_DATATIMEOUT 0x00080000
++#define TMIO_STAT_RXOVERFLOW 0x00100000
++#define TMIO_STAT_TXUNDERRUN 0x00200000
++#define TMIO_STAT_CMDTIMEOUT 0x00400000
++#define TMIO_STAT_RXRDY 0x01000000
++#define TMIO_STAT_TXRQ 0x02000000
++#define TMIO_STAT_ILL_FUNC 0x20000000
++#define TMIO_STAT_CMD_BUSY 0x40000000
++#define TMIO_STAT_ILL_ACCESS 0x80000000
++
++/* Define some IRQ masks */
++/* This is the mask used at reset by the chip */
++#define TMIO_MASK_ALL 0x837f031d
++#define TMIO_MASK_READOP (TMIO_STAT_RXRDY | TMIO_STAT_DATAEND | \
++ TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT)
++#define TMIO_MASK_WRITEOP (TMIO_STAT_TXRQ | TMIO_STAT_DATAEND | \
++ TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT)
++#define TMIO_MASK_CMD (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT | \
++ TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT)
++#define TMIO_MASK_IRQ (TMIO_MASK_READOP | TMIO_MASK_WRITEOP | TMIO_MASK_CMD)
++
++#define enable_mmc_irqs(ctl, i) \
++ do { \
++ u32 mask;\
++ mask = tmio_ioread32((ctl)->irq_mask); \
++ mask &= ~((i) & TMIO_MASK_IRQ); \
++ tmio_iowrite32(mask, (ctl)->irq_mask); \
++ } while (0)
++
++#define disable_mmc_irqs(ctl, i) \
++ do { \
++ u32 mask;\
++ mask = tmio_ioread32((ctl)->irq_mask); \
++ mask |= ((i) & TMIO_MASK_IRQ); \
++ tmio_iowrite32(mask, (ctl)->irq_mask); \
++ } while (0)
++
++#define ack_mmc_irqs(ctl, i) \
++ do { \
++ u32 mask;\
++ mask = tmio_ioread32((ctl)->status); \
++ mask &= ~((i) & TMIO_MASK_IRQ); \
++ tmio_iowrite32(mask, (ctl)->status); \
++ } while (0)
++
++
++struct tmio_mmc_host {
++ struct tmio_mmc_cnf __iomem *cnf;
++ struct tmio_mmc_ctl __iomem *ctl;
++ struct mmc_command *cmd;
++ struct mmc_request *mrq;
++ struct mmc_data *data;
++ struct mmc_host *mmc;
++ int irq;
++
++ /* pio related stuff */
++ struct scatterlist *sg_ptr;
++ unsigned int sg_len;
++ unsigned int sg_off;
++};
++
++#include <linux/scatterlist.h>
++#include <linux/blkdev.h>
++
++static inline void tmio_mmc_init_sg(struct tmio_mmc_host *host, struct mmc_data *data)
++{
++ host->sg_len = data->sg_len;
++ host->sg_ptr = data->sg;
++ host->sg_off = 0;
++}
++
++static inline int tmio_mmc_next_sg(struct tmio_mmc_host *host)
++{
++ host->sg_ptr++;
++ host->sg_off = 0;
++ return --host->sg_len;
++}
++
++static inline char *tmio_mmc_kmap_atomic(struct tmio_mmc_host *host, unsigned long *flags)
++{
++ struct scatterlist *sg = host->sg_ptr;
++
++ local_irq_save(*flags);
++ return kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset;
++}
++
++static inline void tmio_mmc_kunmap_atomic(struct tmio_mmc_host *host, unsigned long *flags)
++{
++ kunmap_atomic(sg_page(host->sg_ptr), KM_BIO_SRC_IRQ);
++ local_irq_restore(*flags);
++}
++
++#ifdef CONFIG_MMC_DEBUG
++#define DBG(args...) printk(args)
++
++void debug_status(u32 status){
++ printk("status: %08x = ", status);
++ if(status & TMIO_STAT_CARD_REMOVE) printk("Card_removed ");
++ if(status & TMIO_STAT_CARD_INSERT) printk("Card_insert ");
++ if(status & TMIO_STAT_SIGSTATE) printk("Sigstate ");
++ if(status & TMIO_STAT_WRPROTECT) printk("Write_protect ");
++ if(status & TMIO_STAT_CARD_REMOVE_A) printk("Card_remove_A ");
++ if(status & TMIO_STAT_CARD_INSERT_A) printk("Card_insert_A ");
++ if(status & TMIO_STAT_SIGSTATE_A) printk("Sigstate_A ");
++ if(status & TMIO_STAT_CMD_IDX_ERR) printk("Cmd_IDX_Err ");
++ if(status & TMIO_STAT_STOPBIT_ERR) printk("Stopbit_ERR ");
++ if(status & TMIO_STAT_ILL_FUNC) printk("ILLEGAL_FUNC ");
++ if(status & TMIO_STAT_CMD_BUSY) printk("CMD_BUSY ");
++ if(status & TMIO_STAT_CMDRESPEND) printk("Response_end ");
++ if(status & TMIO_STAT_DATAEND) printk("Data_end ");
++ if(status & TMIO_STAT_CRCFAIL) printk("CRC_failure ");
++ if(status & TMIO_STAT_DATATIMEOUT) printk("Data_timeout ");
++ if(status & TMIO_STAT_CMDTIMEOUT) printk("Command_timeout ");
++ if(status & TMIO_STAT_RXOVERFLOW) printk("RX_OVF ");
++ if(status & TMIO_STAT_TXUNDERRUN) printk("TX_UND ");
++ if(status & TMIO_STAT_RXRDY) printk("RX_rdy ");
++ if(status & TMIO_STAT_TXRQ) printk("TX_req ");
++ if(status & TMIO_STAT_ILL_ACCESS) printk("ILLEGAL_ACCESS ");
++ printk("\n");
++}
++#else
++#define DBG(fmt,args...) do { } while (0)
++#endif
+--
+1.5.3.8
+
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-04 09:37:18 +0000