aboutsummaryrefslogtreecommitdiffstats
path: root/recipes/linux/linux-2.6.26
diff options
context:
space:
mode:
authorDenys Dmytriyenko <denis@denix.org>2009-03-17 14:32:59 -0400
committerDenys Dmytriyenko <denis@denix.org>2009-03-17 14:32:59 -0400
commit709c4d66e0b107ca606941b988bad717c0b45d9b (patch)
tree37ee08b1eb308f3b2b6426d5793545c38396b838 /recipes/linux/linux-2.6.26
parentfa6cd5a3b993f16c27de4ff82b42684516d433ba (diff)
downloadopenembedded-709c4d66e0b107ca606941b988bad717c0b45d9b.tar.gz
rename packages/ to recipes/ per earlier agreement
See links below for more details: http://thread.gmane.org/gmane.comp.handhelds.openembedded/21326 http://thread.gmane.org/gmane.comp.handhelds.openembedded/21816 Signed-off-by: Denys Dmytriyenko <denis@denix.org> Acked-by: Mike Westerhof <mwester@dls.net> Acked-by: Philip Balister <philip@balister.org> Acked-by: Khem Raj <raj.khem@gmail.com> Acked-by: Marcin Juszkiewicz <hrw@openembedded.org> Acked-by: Koen Kooi <koen@openembedded.org> Acked-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
Diffstat (limited to 'recipes/linux/linux-2.6.26')
-rw-r--r--recipes/linux/linux-2.6.26/boc01/002-081105-headers.patch112
-rw-r--r--recipes/linux/linux-2.6.26/boc01/004-081105-usb.patch17
-rw-r--r--recipes/linux/linux-2.6.26/boc01/005-081217-isl12024.patch940
-rw-r--r--recipes/linux/linux-2.6.26/boc01/006-081216-at24c32.patch361
-rw-r--r--recipes/linux/linux-2.6.26/boc01/007-081216-lm73.patch278
-rw-r--r--recipes/linux/linux-2.6.26/boc01/008-081127-spi.patch327
-rw-r--r--recipes/linux/linux-2.6.26/boc01/010-081105-mii.patch519
-rw-r--r--recipes/linux/linux-2.6.26/boc01/011-081202-gpio.patch365
-rw-r--r--recipes/linux/linux-2.6.26/boc01/012-081222-cy3218-btns.patch223
-rw-r--r--recipes/linux/linux-2.6.26/boc01/013-081212-lcd.patch751
-rw-r--r--recipes/linux/linux-2.6.26/boc01/boc01.dts247
-rw-r--r--recipes/linux/linux-2.6.26/boc01/defconfig1917
-rw-r--r--recipes/linux/linux-2.6.26/canyonlands/defconfig721
-rw-r--r--recipes/linux/linux-2.6.26/cdc-ether-hack.patch11
-rw-r--r--recipes/linux/linux-2.6.26/fsl-elbc-nand-backport.patch138
-rw-r--r--recipes/linux/linux-2.6.26/mpc8313e-rdb/defconfig2031
-rw-r--r--recipes/linux/linux-2.6.26/mpc8313e-rdb/mpc8313e-rdb-cardbus.patch12
-rw-r--r--recipes/linux/linux-2.6.26/mpc8313e-rdb/mpc8313e-rdb-eth-fixed.patch25
-rw-r--r--recipes/linux/linux-2.6.26/mpc8313e-rdb/mpc8313e-rdb-leds.patch204
19 files changed, 9199 insertions, 0 deletions
diff --git a/recipes/linux/linux-2.6.26/boc01/002-081105-headers.patch b/recipes/linux/linux-2.6.26/boc01/002-081105-headers.patch
new file mode 100644
index 0000000000..b82dcbce4a
--- /dev/null
+++ b/recipes/linux/linux-2.6.26/boc01/002-081105-headers.patch
@@ -0,0 +1,112 @@
+diff -Nru /opt/Bollore/dev/oe/build/tmp/work/mpc8313e-rdb-angstrom-linux/linux-2.6.26-r1.1/linux-2.6.26/include/linux/i2c/isl12024.h ../linux-2.6.26.modified/include/linux/i2c/isl12024.h
+--- /opt/Bollore/dev/oe/build/tmp/work/mpc8313e-rdb-angstrom-linux/linux-2.6.26-r1.1/linux-2.6.26/include/linux/i2c/isl12024.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.26.modified/include/linux/i2c/isl12024.h 2008-10-21 10:36:19.000000000 +0200
+@@ -0,0 +1,93 @@
++#ifndef ISL12024_H_
++#define ISL12024_H_
++
++
++
++#define ISL12024_REG_SR 0x3F /* status register */
++#define ISL12024_REG_Y2K 0x37
++#define ISL12024_REG_DW 0x36
++#define ISL12024_REG_YR 0x35
++#define ISL12024_REG_MO 0x34
++#define ISL12024_REG_DT 0x33
++#define ISL12024_REG_HR 0x32
++#define ISL12024_REG_MN 0x31
++#define ISL12024_REG_SC 0x30
++#define ISL12024_REG_DTR 0x13
++#define ISL12024_REG_ATR 0x12
++#define ISL12024_REG_INT 0x11
++#define ISL12024_REG_0 0x10
++#define ISL12024_REG_Y2K1 0x0F
++#define ISL12024_REG_DWA1 0x0E
++#define ISL12024_REG_YRA1 0x0D
++#define ISL12024_REG_MOA1 0x0C
++#define ISL12024_REG_DTA1 0x0B
++#define ISL12024_REG_HRA1 0x0A
++#define ISL12024_REG_MNA1 0x09
++#define ISL12024_REG_SCA1 0x08
++#define ISL12024_REG_Y2K0 0x07
++#define ISL12024_REG_DWA0 0x06
++#define ISL12024_REG_YRA0 0x05
++#define ISL12024_REG_MOA0 0x04
++#define ISL12024_REG_DTA0 0x03
++#define ISL12024_REG_HRA0 0x02
++#define ISL12024_REG_MNA0 0x01
++#define ISL12024_REG_SCA0 0x00
++
++#define ISL12024_CCR_BASE 0x30 /* Base address of CCR */
++#define ISL12024_ALM0_BASE 0x00 /* Base address of ALARM0 */
++
++#define ISL12024_SR_RTCF 0x01 /* Clock failure */
++#define ISL12024_SR_WEL 0x02 /* Write Enable Latch */
++#define ISL12024_SR_RWEL 0x04 /* Register Write Enable */
++#define ISL12024_SR_AL0 0x20 /* Alarm 0 match */
++
++#define ISL12024_DTR_DTR0 0x01
++#define ISL12024_DTR_DTR1 0x02
++#define ISL12024_DTR_DTR2 0x04
++
++#define ISL12024_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */
++
++#define ISL12024_INT_AL0E 0x20 /* Alarm 0 enable */
++/* I2C ADDRESS */
++#define ISL12024_I2C_ADDR 0xDE
++#define ISL12024_I2C_EEPROM_ADDR 0x57
++/* device id section */
++#define ISL12024_REG_ID 0x20
++/* Register map */
++/* rtc section */
++//#define ISL12024_REG_MSB 0x00
++//#define ISL12024_REG_SC 0x30 /* Seconds */
++//#define ISL12024_REG_MN 0x31 /* Minutes */
++//#define ISL12024_REG_HR 0x32 /* Hours */
++#define ISL12024_REG_HR_MIL (1<<7) /* 24h/12h mode */
++#define ISL12024_REG_HR_PM (1<<5) /* PM/AM bit in 12h mode */
++//#define ISL12024_REG_DT 0x33 /* Date */
++//#define ISL12024_REG_MO 0x34 /* Month */
++//#define ISL12024_REG_YR 0x35 /* Year */
++//#define ISL12024_REG_DW 0x36
++//#define ISL12024_REG_Y2K 0x37
++#define ISL12024_RTC_SECTION_LEN 8
++
++
++
++/* control/status section */
++//#define ISL12024_REG_SR 0x3F
++//#define ISL12024_REG_SR_BAT (1<<7) /* battery */
++//#define ISL12024_REG_SR_AL1 (1<<6) /* alarm 0 */
++//#define ISL12024_REG_SR_AL0 (1<<5) /* alarm 1 */
++//#define ISL12024_REG_SR_OSCF (1<<4) /* oscillator fail */
++//#define ISL12024_REG_SR_RWEL (1<<2) /* register write enable latch */
++//#define ISL12024_REG_SR_WEL (1<<1) /* write enable latch */
++//#define ISL12024_REG_SR_RTCF (1<<0) /* rtc fail */
++//#define ISL12024_REG_INT 0x11
++
++#define CCR_SEC 0
++#define CCR_MIN 1
++#define CCR_HOUR 2
++#define CCR_MDAY 3
++#define CCR_MONTH 4
++#define CCR_YEAR 5
++#define CCR_WDAY 6
++#define CCR_Y2K 7
++
++#endif /*ISL12024_H_*/
+diff -Nru /opt/Bollore/dev/oe/build/tmp/work/mpc8313e-rdb-angstrom-linux/linux-2.6.26-r1.1/linux-2.6.26/include/linux/phy.h ../linux-2.6.26.modified/include/linux/phy.h
+--- /opt/Bollore/dev/oe/build/tmp/work/mpc8313e-rdb-angstrom-linux/linux-2.6.26-r1.1/linux-2.6.26/include/linux/phy.h 2008-07-13 23:51:29.000000000 +0200
++++ linux-2.6.26.modified/include/linux/phy.h 2008-10-14 15:12:02.000000000 +0200
+@@ -339,6 +339,11 @@
+ u32 features;
+ u32 flags;
+
++ /* Called during discovery to test if the
++ * device can attach to the bus, even if
++ phy id and mask do not match */
++ bool (*detect)(struct mii_bus *bus, int addr);
++
+ /*
+ * Called to initialize the PHY,
+ * including after a reset
diff --git a/recipes/linux/linux-2.6.26/boc01/004-081105-usb.patch b/recipes/linux/linux-2.6.26/boc01/004-081105-usb.patch
new file mode 100644
index 0000000000..f64119c4fa
--- /dev/null
+++ b/recipes/linux/linux-2.6.26/boc01/004-081105-usb.patch
@@ -0,0 +1,17 @@
+diff -Nru linux-2.6.26-officiel/arch/powerpc/platforms/83xx/usb.c /home/guilig/workspace/kernel-goobie-2.6.26/src/arch/powerpc/platforms/83xx/usb.c
+--- linux-2.6.26-officiel/arch/powerpc/platforms/83xx/usb.c 2008-07-13 23:51:29.000000000 +0200
++++ /home/guilig/workspace/kernel-goobie-2.6.26/src/arch/powerpc/platforms/83xx/usb.c 2008-10-23 11:34:06.000000000 +0200
+@@ -166,10 +166,10 @@
+ !strcmp(prop, "utmi"))) {
+ u32 refsel;
+
+- if (of_device_is_compatible(immr_node, "fsl,mpc8315-immr"))
++// if (of_device_is_compatible(immr_node, "fsl,mpc8315-immr"))
+ refsel = CONTROL_REFSEL_24MHZ;
+- else
+- refsel = CONTROL_REFSEL_48MHZ;
++// else
++// refsel = CONTROL_REFSEL_48MHZ;
+ /* Set UTMI_PHY_EN and REFSEL */
+ out_be32(usb_regs + FSL_USB2_CONTROL_OFFS,
+ CONTROL_UTMI_PHY_EN | refsel);
diff --git a/recipes/linux/linux-2.6.26/boc01/005-081217-isl12024.patch b/recipes/linux/linux-2.6.26/boc01/005-081217-isl12024.patch
new file mode 100644
index 0000000000..bcbc2b35db
--- /dev/null
+++ b/recipes/linux/linux-2.6.26/boc01/005-081217-isl12024.patch
@@ -0,0 +1,940 @@
+Index: linux-2.6.26-NEW/drivers/i2c/chips/isl12024-eeprom.c
+===================================================================
+--- /dev/null
++++ linux-2.6.26-NEW/drivers/i2c/chips/isl12024-eeprom.c
+@@ -0,0 +1,254 @@
++/*
++ * Intersil ISL12024 EEPROM class driver
++ *
++ *
++ * Copyright (C) 2007, CenoSYS (www.cenosys.com).
++ * Guillaume Ligneul
++ * Guillaume.ligneul@gmail.com
++ *
++ * Code is based on eeprom.c
++ *
++ * This software program is licensed subject to the GNU General Public License
++ * (GPL).Version 2,June 1991, available at http://www.fsf.org/copyleft/gpl.html
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/module.h>
++//#include <linux/slab.h>
++//#include <linux/jiffies.h>
++#include <linux/i2c.h>
++#include <linux/mutex.h>
++#include <linux/i2c/isl12024.h>
++
++/* Addresses to scan */
++static const unsigned short normal_i2c[] = { ISL12024_I2C_EEPROM_ADDR, I2C_CLIENT_END };
++
++/* Insmod parameters */
++I2C_CLIENT_INSMOD_1(eeprom);
++
++
++/* Size of EEPROM in bytes */
++#define EEPROM_SIZE 4096
++
++/* Each client has this additional data */
++struct eeprom_data {
++ struct i2c_client client;
++ struct mutex update_lock;
++};
++
++int
++isl12024_i2c_read(struct i2c_client *client, u8 reg, u8 buf[],
++ unsigned len)
++{
++ int ret;
++ u8 dt_addr[2];
++
++ struct i2c_msg msgs[2] = {
++ {
++ .addr = client->addr,
++ .flags = 0,
++ .len = 2,
++ .buf = dt_addr,
++ },
++ {
++ .addr = client->addr,
++ .flags = I2C_M_RD,
++ .len = len ,
++ .buf = buf ,
++ },
++ };
++
++ dt_addr[0] = 0;
++ dt_addr[1] = reg;
++
++ ret = i2c_transfer(client->adapter, msgs, 2);
++ if ( ret < 0) {
++ dev_err(&client->dev, "read error\n");
++ return -EIO;
++ }
++ return ret;
++}
++
++
++int
++isl12024_i2c_write(struct i2c_client *client, u8 reg, u8 const buf[],
++ unsigned len)
++{
++ int ret;
++ u8 i2c_buf[EEPROM_SIZE];
++
++ struct i2c_msg msgs[1] = {
++ {
++ .addr = client->addr,
++ .flags = 0,
++ .len = len+2,
++ .buf = i2c_buf,
++ },
++ };
++
++ i2c_buf[0] = 0;
++ i2c_buf[1] = reg;
++
++
++ memcpy(&i2c_buf[2], &buf[0], len );
++
++
++ ret = i2c_transfer(client->adapter, msgs, 1);
++ printk(KERN_INFO "i2c_transfer %d\n",ret);
++ return ret;
++}
++static int eeprom_attach_adapter(struct i2c_adapter *adapter);
++static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind);
++static int eeprom_detach_client(struct i2c_client *client);
++
++/* This is the driver that will be inserted */
++static struct i2c_driver eeprom_driver = {
++ .driver = {
++ .name = "isl12024-eeprom",
++ },
++ .attach_adapter = eeprom_attach_adapter,
++ .detach_client = eeprom_detach_client,
++};
++
++static ssize_t eeprom_read(struct kobject *kobj, struct bin_attribute *bin_attr,
++ char *buf, loff_t off, size_t count)
++{
++ struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj));
++ struct eeprom_data *data = i2c_get_clientdata(client);
++ int rc;
++
++ mutex_lock(&data->update_lock);
++
++ if (off >= EEPROM_SIZE)
++ return 0;
++
++ if (off + count > EEPROM_SIZE)
++ count = EEPROM_SIZE - off;
++
++ rc = isl12024_i2c_read(client,0,buf,EEPROM_SIZE);
++
++ if (rc < 0){
++ mutex_unlock(&data->update_lock);
++ return -EIO;
++ }
++
++ mutex_unlock(&data->update_lock);
++ return count;
++}
++
++static ssize_t eeprom_write(struct kobject *kobj, struct bin_attribute *attr,
++ char *buf, loff_t off, size_t count)
++{
++ struct i2c_client *client = kobj_to_i2c_client(kobj);
++ struct eeprom_data *data = i2c_get_clientdata(client);
++
++ if (off >= 256)
++ return -ENOSPC;
++
++ if (off + count > 256)
++ count = 256 - off;
++
++ mutex_unlock(&data->update_lock);
++ if (isl12024_i2c_write(client, off, buf, count) < 0)
++ {
++ mutex_unlock(&data->update_lock);
++ return -EIO;
++ }
++
++ mutex_unlock(&data->update_lock);
++ return count;
++}
++
++static struct bin_attribute eeprom_attr = {
++ .attr = {
++ .name = "eeprom",
++ .mode = S_IRUGO,
++ },
++ .size = EEPROM_SIZE,
++ .read = eeprom_read,
++ .write= eeprom_write,
++};
++
++static int eeprom_attach_adapter(struct i2c_adapter *adapter)
++{
++ return i2c_probe(adapter, &addr_data, eeprom_detect);
++}
++
++/* This function is called by i2c_probe */
++static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind)
++{
++ struct i2c_client *new_client;
++ struct eeprom_data *data;
++ int err = 0;
++
++ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA
++ | I2C_FUNC_SMBUS_BYTE))
++ goto exit;
++
++ if (!(data = kzalloc(sizeof(struct eeprom_data), GFP_KERNEL))) {
++ err = -ENOMEM;
++ goto exit;
++ }
++
++ new_client = &data->client;
++ i2c_set_clientdata(new_client, data);
++ new_client->addr = address;
++ new_client->adapter = adapter;
++ new_client->driver = &eeprom_driver;
++ new_client->flags = 0;
++
++ strlcpy(new_client->name, "isl12024-eeprom", I2C_NAME_SIZE);
++ mutex_init(&data->update_lock);
++
++ /* Tell the I2C layer a new client has arrived */
++ if ((err = i2c_attach_client(new_client)))
++ goto exit_kfree;
++
++ /* create the sysfs eeprom file */
++ err = sysfs_create_bin_file(&new_client->dev.kobj, &eeprom_attr);
++ if (err)
++ goto exit_detach;
++
++ return 0;
++
++exit_detach:
++ i2c_detach_client(new_client);
++exit_kfree:
++ kfree(data);
++exit:
++ return err;
++}
++
++static int eeprom_detach_client(struct i2c_client *client)
++{
++ int err;
++
++ sysfs_remove_bin_file(&client->dev.kobj, &eeprom_attr);
++
++ err = i2c_detach_client(client);
++ if (err)
++ return err;
++
++ kfree(i2c_get_clientdata(client));
++
++ return 0;
++}
++
++static int __init eeprom_init(void)
++{
++ return i2c_add_driver(&eeprom_driver);
++}
++
++static void __exit eeprom_exit(void)
++{
++ i2c_del_driver(&eeprom_driver);
++}
++
++
++MODULE_AUTHOR("Guillaume Ligneul <guillaume.ligneul@cenosys.com>");
++MODULE_DESCRIPTION("I2C Intersil12024 EEPROM driver");
++MODULE_LICENSE("GPL");
++
++module_init(eeprom_init);
++module_exit(eeprom_exit);
+Index: linux-2.6.26-NEW/drivers/i2c/chips/Kconfig
+===================================================================
+--- linux-2.6.26-NEW.orig/drivers/i2c/chips/Kconfig
++++ linux-2.6.26-NEW/drivers/i2c/chips/Kconfig
+@@ -14,6 +14,15 @@ config DS1682
+ This driver can also be built as a module. If so, the module
+ will be called ds1682.
+
++config ISL12024EEPROM
++ tristate "Intersil 12024 EEPROM"
++ depends on RTC_DRV_ISL12024
++ help
++ If you say yes here you get support for Intersil12024 EEPROM.
++
++ This driver can also be built as a module. If so, the module
++ will be called isl12024-eeprom.
++
+ config SENSORS_EEPROM
+ tristate "EEPROM reader"
+ depends on EXPERIMENTAL
+Index: linux-2.6.26-NEW/drivers/i2c/chips/Makefile
+===================================================================
+--- linux-2.6.26-NEW.orig/drivers/i2c/chips/Makefile
++++ linux-2.6.26-NEW/drivers/i2c/chips/Makefile
+@@ -9,6 +9,8 @@
+ # * I/O expander drivers go to drivers/gpio
+ #
+
++
++obj-$(CONFIG_ISL12024EEPROM) += isl12024-eeprom.o
+ obj-$(CONFIG_DS1682) += ds1682.o
+ obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o
+ obj-$(CONFIG_SENSORS_MAX6875) += max6875.o
+Index: linux-2.6.26-NEW/drivers/rtc/Kconfig
+===================================================================
+--- linux-2.6.26-NEW.orig/drivers/rtc/Kconfig
++++ linux-2.6.26-NEW/drivers/rtc/Kconfig
+@@ -124,6 +124,12 @@ comment "I2C RTC drivers"
+
+ if I2C
+
++config RTC_DRV_ISL12024
++ tristate "Intersil 12024 RTC/ UniqueID"
++ help
++ If you say yes ....
++ This driver can also be built as a module.
++
+ config RTC_DRV_DS1307
+ tristate "Dallas/Maxim DS1307/37/38/39/40, ST M41T00"
+ help
+Index: linux-2.6.26-NEW/drivers/rtc/Makefile
+===================================================================
+--- linux-2.6.26-NEW.orig/drivers/rtc/Makefile
++++ linux-2.6.26-NEW/drivers/rtc/Makefile
+@@ -33,6 +33,7 @@ obj-$(CONFIG_RTC_DRV_DS1742) += rtc-ds17
+ obj-$(CONFIG_RTC_DRV_EP93XX) += rtc-ep93xx.o
+ obj-$(CONFIG_RTC_DRV_FM3130) += rtc-fm3130.o
+ obj-$(CONFIG_RTC_DRV_ISL1208) += rtc-isl1208.o
++obj-$(CONFIG_RTC_DRV_ISL12024) += rtc-isl12024.o
+ obj-$(CONFIG_RTC_DRV_M41T80) += rtc-m41t80.o
+ obj-$(CONFIG_RTC_DRV_M48T59) += rtc-m48t59.o
+ obj-$(CONFIG_RTC_DRV_M48T86) += rtc-m48t86.o
+Index: linux-2.6.26-NEW/drivers/rtc/rtc-isl12024.c
+===================================================================
+--- /dev/null
++++ linux-2.6.26-NEW/drivers/rtc/rtc-isl12024.c
+@@ -0,0 +1,516 @@
++/*
++ * Intersil ISL12024 class driver
++ *
++ *
++ * Copyright (C) 2007, CenoSYS (www.cenosys.com).
++ * Guillaume Ligneul
++ * Guillaume.ligneul@gmail.com
++ *
++ * This software program is licensed subject to the GNU General Public License
++ * (GPL).Version 2,June 1991, available at http://www.fsf.org/copyleft/gpl.html
++ */
++
++#include <linux/module.h>
++#include <linux/i2c.h>
++#include <linux/bcd.h>
++#include <linux/rtc.h>
++#include <linux/proc_fs.h>
++#include <linux/i2c/isl12024.h>
++#include <linux/delay.h>
++
++
++#define DBG 1
++#undef DBG
++
++static u8 buf_id[ISL12024_RTC_SECTION_LEN] = { 0 ,};
++
++#define DRV_NAME "isl12024"
++#define DRV_VERSION "0.1"
++
++/* i2c configuration */
++
++static const unsigned short normal_i2c[] = {
++ ISL12024_I2C_ADDR >>1, I2C_CLIENT_END
++};
++I2C_CLIENT_INSMOD;
++
++/* Procfs management */
++static struct proc_dir_entry * root_proc = NULL;
++static struct proc_dir_entry * entry_proc = NULL;
++static int read_proc (char * page, char ** start, off_t off, int count, int * eof, void * data);
++
++static int isl12024_get_status(struct i2c_client *client, unsigned char *sr);
++static int isl12024_fix_osc(struct i2c_client *client);
++
++
++static int isl12024_attach_adapter(struct i2c_adapter *adapter);
++static int isl12024_detach_client(struct i2c_client *client);
++
++// To debug (may be add in includ/linux/i2c-id.h)
++#define I2C_DRIVERID_ISL12024 97
++
++static struct i2c_driver isl12024_driver = {
++ .driver = {
++ .name = DRV_NAME,
++ },
++ .id = I2C_DRIVERID_ISL12024,
++ .attach_adapter = &isl12024_attach_adapter,
++ .detach_client = &isl12024_detach_client,
++};
++
++int
++isl12024_i2c_read_regs(struct i2c_client *client, u8 reg, u8 buf[],
++ unsigned len)
++{
++ int ret;
++ u8 dt_addr[2];
++
++ struct i2c_msg msgs[2] = {
++ {
++ .addr = client->addr,
++ .flags = 0,
++ .len = 2,
++ .buf = dt_addr,
++ },
++ {
++ .addr = client->addr,
++ .flags = I2C_M_RD,
++ .len = len ,
++ .buf = buf ,
++ },
++ };
++
++ dt_addr[0] = 0;
++ dt_addr[1] = reg;
++
++ ret = i2c_transfer(client->adapter, msgs, 2);
++ if ( ret < 0) {
++ dev_err(&client->dev, "read error\n");
++ return -EIO;
++ }
++ return ret;
++}
++
++EXPORT_SYMBOL(isl12024_i2c_read_regs);
++
++
++int
++isl12024_i2c_set_regs(struct i2c_client *client, u8 reg, u8 const buf[],
++ unsigned len)
++{
++ int ret;
++ u8 i2c_buf[10];
++
++ struct i2c_msg msgs[1] = {
++ {
++ .addr = client->addr,
++ .flags = 0,
++ .len = len+2,
++ .buf = i2c_buf,
++ },
++ };
++
++ i2c_buf[0] = 0;
++ i2c_buf[1] = reg;
++
++
++ memcpy(&i2c_buf[2], &buf[0], len );
++
++
++ ret = i2c_transfer(client->adapter, msgs, 1);
++ printk(KERN_INFO "i2c_transfer %d\n",ret);
++ return ret;
++}
++
++EXPORT_SYMBOL(isl12024_i2c_set_regs);
++
++static int isl12024_i2c_validate_client(struct i2c_client *client)
++{
++ u8 regs[ISL12024_RTC_SECTION_LEN] = { 0, };
++ u8 zero_mask[ISL12024_RTC_SECTION_LEN] = {
++ 0x80, 0x80, 0x40, 0xc0, 0xe0, 0x00, 0xf8, 0xc6
++ };
++
++ int i;
++ int ret;
++
++ ret = isl12024_i2c_read_regs(client, ISL12024_REG_SC, regs, ISL12024_RTC_SECTION_LEN);
++
++ if (ret < 0)
++ return ret;
++
++ for (i = 0; i < ISL12024_RTC_SECTION_LEN; ++i) {
++ if (regs[i] & zero_mask[i]) /* check if bits are cleared */
++ return -ENODEV;
++
++ }
++
++ return 0;
++}
++
++static int isl12024_read_time(struct i2c_client *client,
++ struct rtc_time *tm)
++{
++ unsigned char sr;
++ int err;
++ u8 regs[ISL12024_RTC_SECTION_LEN] = { 0, };
++
++ printk(KERN_INFO "%s\n ",__FUNCTION__ );
++
++
++ if (isl12024_get_status(client, &sr) < 0) {
++ dev_err(&client->dev, "%s: reading SR failed\n", __func__);
++ return -EIO;
++ }
++
++ err = isl12024_i2c_read_regs(client, ISL12024_REG_SC, regs, ISL12024_RTC_SECTION_LEN);
++
++#ifdef DBG
++ int i;
++ for(i=0; i<ISL12024_RTC_SECTION_LEN; i++)
++ printk(KERN_INFO "0x%2X\n", regs[i]);
++#endif
++
++ if (err < 0) {
++ dev_err(&client->dev, "%s: reading RTC section failed\n",
++ __func__);
++ return sr;
++ }
++
++ tm->tm_sec = BCD2BIN(regs[0]);
++ tm->tm_min = BCD2BIN(regs[1]);
++
++ { /* HR field has a more complex interpretation */
++ const u8 _hr = regs[2];
++ if (_hr & ISL12024_REG_HR_MIL) /* 24h format */
++ tm->tm_hour = BCD2BIN(_hr & 0x3f);
++ else { // 12h format
++ tm->tm_hour = BCD2BIN(_hr & 0x1f);
++ if (_hr & ISL12024_REG_HR_PM) /* PM flag set */
++ tm->tm_hour += 12;
++ }
++ }
++
++ tm->tm_mday = BCD2BIN(regs[3]);
++ tm->tm_mon = BCD2BIN(regs[4]);
++ tm->tm_year = BCD2BIN(regs[5]) + 100;
++ tm->tm_wday = BCD2BIN(regs[6]);
++
++ return rtc_valid_tm(tm);
++}
++
++static int isl12024_get_status(struct i2c_client *client, unsigned char *sr)
++{
++ static unsigned char sr_addr[2] = { 0, ISL12024_REG_SR };
++
++ struct i2c_msg msgs[] = {
++ { client->addr, 0, 2, sr_addr }, /* setup read ptr */
++ { client->addr, I2C_M_RD, 1, sr }, /* read status */
++ };
++
++ /* read status register */
++ if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
++ dev_err(&client->dev, "%s: read error\n", __func__);
++ return -EIO;
++ }
++
++ return 0;
++}
++
++static int isl12024_set_datetime(struct i2c_client *client, struct rtc_time *tm,
++ int datetoo, u8 reg_base, unsigned char alm_enable)
++{
++ int i, xfer, nbytes;
++ unsigned char buf[8];
++ unsigned char rdata[10] = { 0, reg_base };
++
++ static const unsigned char wel[3] = { 0, ISL12024_REG_SR,
++ ISL12024_SR_WEL };
++
++ static const unsigned char rwel[3] = { 0, ISL12024_REG_SR,
++ ISL12024_SR_WEL | ISL12024_SR_RWEL };
++
++ static const unsigned char diswe[3] = { 0, ISL12024_REG_SR, 0 };
++
++ dev_dbg(&client->dev,
++ "%s: secs=%d, mins=%d, hours=%d\n",
++ __func__,
++ tm->tm_sec, tm->tm_min, tm->tm_hour);
++
++ buf[CCR_SEC] = BIN2BCD(tm->tm_sec);
++ buf[CCR_MIN] = BIN2BCD(tm->tm_min);
++
++ /* set hour and 24hr bit */
++ buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | ISL12024_HR_MIL;
++
++ /* should we also set the date? */
++ if (datetoo) {
++ dev_dbg(&client->dev,
++ "%s: mday=%d, mon=%d, year=%d, wday=%d\n",
++ __func__,
++ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
++
++ buf[CCR_MDAY] = BIN2BCD(tm->tm_mday);
++
++ /* month, 1 - 12 */
++ buf[CCR_MONTH] = BIN2BCD(tm->tm_mon);
++
++ /* year, since the rtc epoch*/
++ buf[CCR_YEAR] = BIN2BCD(tm->tm_year % 100);
++ buf[CCR_WDAY] = tm->tm_wday & 0x07;
++ buf[CCR_Y2K] = BIN2BCD(tm->tm_year / 100);
++ }
++
++ /* If writing alarm registers, set compare bits on registers 0-4 */
++ if (reg_base < ISL12024_CCR_BASE)
++ for (i = 0; i <= 4; i++)
++ buf[i] |= 0x80;
++
++ /* this sequence is required to unlock the chip */
++ if ((xfer = i2c_master_send(client, wel, 3)) != 3) {
++ dev_err(&client->dev, "%s: wel - %d\n", __func__, xfer);
++ return -EIO;
++ }
++
++ if ((xfer = i2c_master_send(client, rwel, 3)) != 3) {
++ dev_err(&client->dev, "%s: rwel - %d\n", __func__, xfer);
++ return -EIO;
++ }
++
++
++ /* write register's data */
++ if (datetoo)
++ nbytes = 8;
++ else
++ nbytes = 3;
++ for (i = 0; i < nbytes; i++)
++ rdata[2+i] = buf[i];
++
++ xfer = i2c_master_send(client, rdata, nbytes+2);
++ if (xfer != nbytes+2) {
++ dev_err(&client->dev,
++ "%s: result=%d addr=%02x, data=%02x\n",
++ __func__,
++ xfer, rdata[1], rdata[2]);
++ return -EIO;
++ }
++
++ /* If we wrote to the nonvolatile region, wait 10msec for write cycle*/
++ if (reg_base < ISL12024_CCR_BASE) {
++ unsigned char al0e[3] = { 0, ISL12024_REG_INT, 0 };
++
++ msleep(10);
++
++ /* ...and set or clear the AL0E bit in the INT register */
++
++ /* Need to set RWEL again as the write has cleared it */
++ xfer = i2c_master_send(client, rwel, 3);
++ if (xfer != 3) {
++ dev_err(&client->dev,
++ "%s: aloe rwel - %d\n",
++ __func__,
++ xfer);
++ return -EIO;
++ }
++
++ if (alm_enable)
++ al0e[2] = ISL12024_INT_AL0E;
++
++ xfer = i2c_master_send(client, al0e, 3);
++ if (xfer != 3) {
++ dev_err(&client->dev,
++ "%s: al0e - %d\n",
++ __func__,
++ xfer);
++ return -EIO;
++ }
++
++ /* and wait 10msec again for this write to complete */
++ msleep(10);
++ }
++
++ /* disable further writes */
++ if ((xfer = i2c_master_send(client, diswe, 3)) != 3) {
++ dev_err(&client->dev, "%s: diswe - %d\n", __func__, xfer);
++ return -EIO;
++ }
++
++ return 0;
++}
++
++static int isl12024_fix_osc(struct i2c_client *client)
++{
++ int err;
++ struct rtc_time tm;
++
++ tm.tm_hour = tm.tm_min = tm.tm_sec = 0;
++
++ err = isl12024_set_datetime(client, &tm, 0, ISL12024_CCR_BASE, 0);
++ if (err < 0)
++ printk(KERN_INFO "unable to restart the oscillator\n");
++
++ return err;
++}
++
++static int isl12024_rtc_read_time(struct device *dev, struct rtc_time *tm)
++{
++ return isl12024_read_time(to_i2c_client(dev), tm);
++
++}
++
++static int isl12024_rtc_set_time(struct device *dev, struct rtc_time *tm)
++{
++ return isl12024_set_datetime(to_i2c_client(dev),
++ tm, 1, ISL12024_CCR_BASE, 0);
++}
++
++static int
++isl12024_rtc_proc(struct device *dev, struct seq_file *seq)
++{
++
++ /* Nothing to do */
++
++ return 0;
++}
++
++static const struct rtc_class_ops isl12024_rtc_ops = {
++ .proc = isl12024_rtc_proc,
++ .read_time = isl12024_rtc_read_time,
++ .set_time = isl12024_rtc_set_time,
++};
++
++static int read_proc (char * page, char ** start, off_t off, int count, int * eof, void * data)
++{
++ int i=0;
++
++ printk("id: 0x");
++ for(i=0;i<ISL12024_RTC_SECTION_LEN;i++)
++ printk("%02X",buf_id[i]);
++ printk("\n");
++ return 0;
++}
++
++static int
++isl12024_probe(struct i2c_adapter *adapter, int addr, int kind)
++{
++
++ int rc = 0;
++ int err = 0;
++ unsigned char sr;
++ struct i2c_client *new_client = NULL;
++ struct rtc_device *rtc = NULL;
++
++ if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
++ rc = -ENODEV;
++ goto failout;
++ }
++
++ new_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
++ if (new_client == NULL) {
++ rc = -ENOMEM;
++ goto failout;
++ }
++
++ new_client->addr = addr;
++ new_client->adapter = adapter;
++ new_client->driver = &isl12024_driver;
++ new_client->flags = 0;
++ strcpy(new_client->name, DRV_NAME);
++
++ if (kind < 0) {
++ rc = isl12024_i2c_validate_client(new_client);
++ if (rc < 0)
++ goto failout;
++ }
++
++ rc = i2c_attach_client(new_client);
++ if (rc < 0)
++ goto failout;
++
++ rtc = rtc_device_register(isl12024_driver.driver.name,
++ &new_client->dev,
++ &isl12024_rtc_ops, THIS_MODULE);
++
++ if (IS_ERR(rtc)) {
++ printk("Error during rtc registration\n");
++ rc = PTR_ERR(rtc);
++ goto failout;
++ }
++
++ i2c_set_clientdata(new_client, rtc);
++
++ /* Check for power failures and eventualy enable the osc */
++ if ((err = isl12024_get_status(new_client, &sr)) == 0) {
++ if (sr & ISL12024_SR_RTCF) {
++ printk(KERN_INFO "power failure detected, "
++ "please set the clock\n");
++ udelay(50);
++ isl12024_fix_osc(new_client);
++ }
++ }
++ else
++ printk(KERN_INFO "couldn't read status\n");
++
++ root_proc = proc_mkdir( "isl12024", 0 );
++ entry_proc = create_proc_entry("id", S_IFREG | S_IRUGO | S_IWUSR, root_proc);
++
++ if (entry_proc == NULL)
++ return -1;
++
++ entry_proc->owner = THIS_MODULE;
++ entry_proc->read_proc = read_proc;
++
++ /* read unique id from eeprom */
++ isl12024_i2c_read_regs(new_client, ISL12024_REG_ID, buf_id, sizeof(buf_id));
++
++
++ return 0;
++
++ failout:
++ kfree(new_client);
++ return rc;
++}
++
++static int
++isl12024_attach_adapter (struct i2c_adapter *adapter)
++{
++ return i2c_probe(adapter, &addr_data, isl12024_probe);
++}
++
++static int
++isl12024_detach_client(struct i2c_client *client)
++{
++ int rc;
++ struct rtc_device *const rtc = i2c_get_clientdata(client);
++
++ if (rtc)
++ rtc_device_unregister(rtc);
++
++ rc = i2c_detach_client(client);
++ if (rc)
++ return rc;
++
++ kfree(client);
++
++ return 0;
++}
++
++/* module init/exit */
++
++static int __init isl12024_init(void)
++{
++ return i2c_add_driver(&isl12024_driver);
++}
++
++static void __exit isl12024_exit(void)
++{
++ i2c_del_driver(&isl12024_driver);
++}
++
++MODULE_AUTHOR("Guillaume Ligneul <guillaume.ligneul@cenosys.com>");
++MODULE_DESCRIPTION("Intersil ISL12024 driver");
++MODULE_LICENSE("GPL");
++MODULE_VERSION(DRV_VERSION);
++
++module_init(isl12024_init);
++module_exit(isl12024_exit);
+Index: linux-2.6.26-NEW/include/i2c/isl12024.h
+===================================================================
+--- /dev/null
++++ linux-2.6.26-NEW/include/i2c/isl12024.h
+@@ -0,0 +1,93 @@
++#ifndef ISL12024_H_
++#define ISL12024_H_
++
++
++
++#define ISL12024_REG_SR 0x3F /* status register */
++#define ISL12024_REG_Y2K 0x37
++#define ISL12024_REG_DW 0x36
++#define ISL12024_REG_YR 0x35
++#define ISL12024_REG_MO 0x34
++#define ISL12024_REG_DT 0x33
++#define ISL12024_REG_HR 0x32
++#define ISL12024_REG_MN 0x31
++#define ISL12024_REG_SC 0x30
++#define ISL12024_REG_DTR 0x13
++#define ISL12024_REG_ATR 0x12
++#define ISL12024_REG_INT 0x11
++#define ISL12024_REG_0 0x10
++#define ISL12024_REG_Y2K1 0x0F
++#define ISL12024_REG_DWA1 0x0E
++#define ISL12024_REG_YRA1 0x0D
++#define ISL12024_REG_MOA1 0x0C
++#define ISL12024_REG_DTA1 0x0B
++#define ISL12024_REG_HRA1 0x0A
++#define ISL12024_REG_MNA1 0x09
++#define ISL12024_REG_SCA1 0x08
++#define ISL12024_REG_Y2K0 0x07
++#define ISL12024_REG_DWA0 0x06
++#define ISL12024_REG_YRA0 0x05
++#define ISL12024_REG_MOA0 0x04
++#define ISL12024_REG_DTA0 0x03
++#define ISL12024_REG_HRA0 0x02
++#define ISL12024_REG_MNA0 0x01
++#define ISL12024_REG_SCA0 0x00
++
++#define ISL12024_CCR_BASE 0x30 /* Base address of CCR */
++#define ISL12024_ALM0_BASE 0x00 /* Base address of ALARM0 */
++
++#define ISL12024_SR_RTCF 0x01 /* Clock failure */
++#define ISL12024_SR_WEL 0x02 /* Write Enable Latch */
++#define ISL12024_SR_RWEL 0x04 /* Register Write Enable */
++#define ISL12024_SR_AL0 0x20 /* Alarm 0 match */
++
++#define ISL12024_DTR_DTR0 0x01
++#define ISL12024_DTR_DTR1 0x02
++#define ISL12024_DTR_DTR2 0x04
++
++#define ISL12024_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */
++
++#define ISL12024_INT_AL0E 0x20 /* Alarm 0 enable */
++/* I2C ADDRESS */
++#define ISL12024_I2C_ADDR 0xDE
++#define ISL12024_I2C_EEPROM_ADDR 0x57
++/* device id section */
++#define ISL12024_REG_ID 0x20
++/* Register map */
++/* rtc section */
++//#define ISL12024_REG_MSB 0x00
++//#define ISL12024_REG_SC 0x30 /* Seconds */
++//#define ISL12024_REG_MN 0x31 /* Minutes */
++//#define ISL12024_REG_HR 0x32 /* Hours */
++#define ISL12024_REG_HR_MIL (1<<7) /* 24h/12h mode */
++#define ISL12024_REG_HR_PM (1<<5) /* PM/AM bit in 12h mode */
++//#define ISL12024_REG_DT 0x33 /* Date */
++//#define ISL12024_REG_MO 0x34 /* Month */
++//#define ISL12024_REG_YR 0x35 /* Year */
++//#define ISL12024_REG_DW 0x36
++//#define ISL12024_REG_Y2K 0x37
++#define ISL12024_RTC_SECTION_LEN 8
++
++
++
++/* control/status section */
++//#define ISL12024_REG_SR 0x3F
++//#define ISL12024_REG_SR_BAT (1<<7) /* battery */
++//#define ISL12024_REG_SR_AL1 (1<<6) /* alarm 0 */
++//#define ISL12024_REG_SR_AL0 (1<<5) /* alarm 1 */
++//#define ISL12024_REG_SR_OSCF (1<<4) /* oscillator fail */
++//#define ISL12024_REG_SR_RWEL (1<<2) /* register write enable latch */
++//#define ISL12024_REG_SR_WEL (1<<1) /* write enable latch */
++//#define ISL12024_REG_SR_RTCF (1<<0) /* rtc fail */
++//#define ISL12024_REG_INT 0x11
++
++#define CCR_SEC 0
++#define CCR_MIN 1
++#define CCR_HOUR 2
++#define CCR_MDAY 3
++#define CCR_MONTH 4
++#define CCR_YEAR 5
++#define CCR_WDAY 6
++#define CCR_Y2K 7
++
++#endif /*ISL12024_H_*/
diff --git a/recipes/linux/linux-2.6.26/boc01/006-081216-at24c32.patch b/recipes/linux/linux-2.6.26/boc01/006-081216-at24c32.patch
new file mode 100644
index 0000000000..0ffec7f742
--- /dev/null
+++ b/recipes/linux/linux-2.6.26/boc01/006-081216-at24c32.patch
@@ -0,0 +1,361 @@
+Index: linux-2.6.26-NEW/drivers/i2c/chips/Makefile
+===================================================================
+--- linux-2.6.26-NEW.orig/drivers/i2c/chips/Makefile
++++ linux-2.6.26-NEW/drivers/i2c/chips/Makefile
+@@ -9,7 +9,6 @@
+ # * I/O expander drivers go to drivers/gpio
+ #
+
+-
+ obj-$(CONFIG_ISL12024EEPROM) += isl12024-eeprom.o
+ obj-$(CONFIG_DS1682) += ds1682.o
+ obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o
+@@ -22,6 +21,7 @@ obj-$(CONFIG_ISP1301_OMAP) += isp1301_om
+ obj-$(CONFIG_TPS65010) += tps65010.o
+ obj-$(CONFIG_MENELAUS) += menelaus.o
+ obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o
++obj-$(CONFIG_EEPROM_RW) += eeprom-rw.o
+
+ ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
+ EXTRA_CFLAGS += -DDEBUG
+Index: linux-2.6.26-NEW/drivers/i2c/chips/eeprom-rw.c
+===================================================================
+--- /dev/null
++++ linux-2.6.26-NEW/drivers/i2c/chips/eeprom-rw.c
+@@ -0,0 +1,319 @@
++/*
++ eeprom-rw.c
++
++ Mostly rewritten Feb 2008 by Davide Rizzo <[EMAIL PROTECTED]>
++ Starting from drivers/i2c/chips/eeprom.c
++
++ Copyright (C) 1998, 1999 Frodo Looijaard <[EMAIL PROTECTED]> and
++ Philip Edelbrock <[EMAIL PROTECTED]>
++ Copyright (C) 2003 Greg Kroah-Hartman <[EMAIL PROTECTED]>
++ Copyright (C) 2003 IBM Corp.
++
++ This program is free software; you can redistribute it and/or modify
++ it under the terms of the GNU General Public License as published by
++ the Free Software Foundation; either version 2 of the License, or
++ (at your option) any later version.
++
++ This program is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ GNU General Public License for more details.
++
++ You should have received a copy of the GNU General Public License
++ along with this program; if not, write to the Free Software
++ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++*/
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/slab.h>
++#include <linux/sched.h>
++#include <linux/jiffies.h>
++#include <linux/i2c.h>
++#include <linux/mutex.h>
++#include <linux/delay.h>
++
++/* To avoid false aliases, it scans only address 0x50.
++ Drawback: it cannot manage chips with hardware strapped address != 0 */
++static unsigned short normal_i2c[] = {0x50, I2C_CLIENT_END};
++
++/* Insmod parameters */
++I2C_CLIENT_INSMOD_1(eeprom);
++
++struct eeprom_device {
++ int double_address, total_size, page_size, virt_device_len;
++ int pin_address_mask;
++ const char *name;
++};
++
++static char *eeprom_name = "2432";
++module_param_named(CHIP, eeprom_name, charp, S_IRUGO | S_IWUSR);
++MODULE_PARM_DESC(CHIP, "Eeprom type (ex.2408,2416...)");
++
++static const struct eeprom_device eeproms[] = {
++ {0, 16, 1, 16, 0, "2400"},
++ {0, 128, 8, 128, 0, "2401"},
++ {0, 128, 16, 128, 7, "24014"},
++ {0, 256, 8, 256, 0, "2402"},
++ {0, 256, 16, 256, 7, "24024"},
++ {0, 256, 16, 256, 7, "24025"},
++ {0, 512, 16, 256, 0, "2404"},
++ {0, 1024, 16, 256, 0, "2408"},
++ {0, 2048, 16, 256, 0, "2416"},
++ {1, 4096, 32, 4096, 7, "2432"},
++ {1, 8192, 32, 8192, 7, "2464"},
++ {1, 8192, 64, 8192, 7, "2465"},
++ {1, 16384, 64, 16384, 7, "24128"},
++ {1, 32768, 64, 32768, 7, "24256"},
++ {1, 65536, 128, 65536, 7, "24512"},
++ {1, 65536, 64, 32768, 3, "24515"},
++ {1, 131072, 256, 65536, 2, "241024"},
++ {1, 131072, 128, 65536, 3, "241025"},
++ {0, 0, 0, 0, 0, NULL}
++};
++
++#define MAX_EEPROM_PAGE_SIZE 256
++
++/* Each client has this additional data */
++struct eeprom_info {
++ struct i2c_client client;
++ struct mutex update_lock;
++ const struct eeprom_device *selected_eeprom;
++ char buf[MAX_EEPROM_PAGE_SIZE + 2];
++};
++
++static ssize_t eeprom_read(struct kobject *kobj, struct bin_attribute *t,
++ char *buf, loff_t loff, size_t count)
++{
++ struct i2c_client *client =
++ to_i2c_client(container_of(kobj, struct device, kobj));
++ struct eeprom_info *info = i2c_get_clientdata(client);
++ char offset[2];
++ int ret, off = (int)loff;
++ struct i2c_msg msgrd[2];
++ if (off >= info->selected_eeprom->total_size)
++ return(-EINVAL);
++ if (off + count > info->selected_eeprom->total_size)
++ count = info->selected_eeprom->total_size - off;
++ if (count == 0)
++ return(-EINVAL);
++ mutex_lock(&info->update_lock);
++ offset[0] = off >> 8;
++ offset[1] = off & 0xFF;
++ msgrd[0].addr = msgrd[1].addr = client->addr + off /
++ info->selected_eeprom->virt_device_len;
++ msgrd[0].flags = 0;
++ if (info->selected_eeprom->double_address) {
++ msgrd[0].len = 2;
++ msgrd[0].buf = offset;
++ } else {
++ msgrd[0].len = 1;
++ msgrd[0].buf = &offset[1];
++ }
++ msgrd[1].flags = I2C_M_RD; /* |I2C_M_NOSTART; */
++ msgrd[1].len = count;
++ msgrd[1].buf = buf;
++ ret = i2c_transfer(client->adapter, msgrd, 2);
++ mutex_unlock(&info->update_lock);
++ return (ret == 2) ? count : ret;
++}
++
++static ssize_t eeprom_write(struct kobject *kobj, struct bin_attribute *t,
++ char *buf, loff_t loff, size_t count)
++{
++ struct i2c_client *client =
++ to_i2c_client(container_of(kobj, struct device, kobj));
++ struct eeprom_info *info = i2c_get_clientdata(client);
++ struct i2c_msg msgwr, msgack;
++ int i, tx = 0, off = (int)loff;
++ if (off >= info->selected_eeprom->total_size)
++ return -EINVAL;
++ if ((off + count) > info->selected_eeprom->total_size)
++ count = info->selected_eeprom->total_size-off;
++ if (count == 0)
++ return -EINVAL;
++ msgwr.flags = 0;
++ msgack.flags = 0;
++ msgack.len = 0;
++ mutex_lock(&info->update_lock);
++ while (count) {
++ int len = info->selected_eeprom->page_size -
++ (off % info->selected_eeprom->page_size);
++ if (len > count)
++ len = count;
++ msgwr.addr = msgack.addr = client->addr +
++ off / info->selected_eeprom->virt_device_len;
++ info->buf[0] = off >> 8;
++ info->buf[1] = off & 0xFF;
++ memcpy(info->buf + 2, buf, len);
++ if (info->selected_eeprom->double_address) {
++ msgwr.buf = info->buf;
++ msgwr.len = len + 2;
++ } else {
++ msgwr.buf = 1 + info->buf;
++ msgwr.len = len + 1;
++ }
++ if (i2c_transfer(client->adapter, &msgwr, 1) != 1)
++ break;
++ for (i = 0; i < 20; i++) {
++ if (i2c_transfer(client->adapter, &msgack, 1) == 1)
++ break;
++ mdelay(1);
++ }
++ if (i >= 20)
++ break;
++ count -= len;
++ off += len;
++ buf += len;
++ tx += len;
++ }
++ mutex_unlock(&info->update_lock);
++ return tx;
++}
++
++static struct bin_attribute eeprom_attr = {
++ .attr =
++ {
++ .name = "data",
++ .mode = S_IRUGO | S_IWUSR,
++ .owner = THIS_MODULE,
++ },
++/* .size = selected_eeprom->total_size, */
++ .read = eeprom_read,
++ .write = eeprom_write,
++};
++
++static ssize_t chip_show(struct device *dev, struct device_attribute *attr,
++ char *buffer)
++{
++ struct eeprom_info *info = (struct eeprom_info *)dev_get_drvdata(dev);
++ return sprintf(buffer, "%s\n", info->selected_eeprom->name);
++}
++
++static ssize_t chip_store(struct device *dev, struct device_attribute *attr,
++ const char *buffer, size_t count)
++{
++ struct eeprom_info *info = (struct eeprom_info *)dev_get_drvdata(dev);
++ const struct eeprom_device *ei_pt;
++ if (buffer[count - 1] == '\n')
++ count--;
++ for (ei_pt = eeproms; ei_pt->name; ei_pt++)
++ if (strncasecmp(buffer, ei_pt->name, count) == 0) {
++ mutex_lock(&info->update_lock);
++ info->selected_eeprom = ei_pt;
++ sysfs_remove_bin_file(&info->client.dev.kobj,
++ &eeprom_attr);
++ eeprom_attr.size = info->selected_eeprom->total_size;
++ sysfs_create_bin_file(&info->client.dev.kobj,
++ &eeprom_attr);
++ mutex_unlock(&info->update_lock);
++ }
++ return count;
++}
++
++static DEVICE_ATTR(chip, S_IRUGO | S_IWUSR, chip_show, chip_store);
++
++static int eeprom_attach_adapter(struct i2c_adapter *adapter);
++static int eeprom_detach_client(struct i2c_client *client);
++
++/* This is the driver that will be inserted */
++static struct i2c_driver eeprom_driver = {
++ .driver =
++ {
++ .name = "eeprom",
++ },
++ .attach_adapter = eeprom_attach_adapter,
++ .detach_client = eeprom_detach_client,
++};
++
++/* This function is called by i2c_probe */
++static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind)
++{
++ struct i2c_client *new_client;
++ struct eeprom_info *info;
++ struct i2c_msg msg;
++ int err = 0;
++ const struct eeprom_device *ei_pt;
++ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA |
++ I2C_FUNC_SMBUS_BYTE))
++ goto exit;
++ for (ei_pt = eeproms; ei_pt->name; ei_pt++)
++ if (strcasecmp(eeprom_name, ei_pt->name) == 0)
++ break;
++/* if((address&0x07)%(ei_pt->total_size/ei_pt->virt_device_len)!=0)
++ goto exit; */
++ msg.addr = address;
++ msg.flags = 0;
++ msg.len = 0;
++ if (i2c_transfer(adapter, &msg, 1) != 1)
++ goto exit;
++ info = kzalloc(sizeof(struct eeprom_info), GFP_KERNEL);
++ if (!info) {
++ err = -ENOMEM;
++ goto exit;
++ }
++ info->selected_eeprom = ei_pt;
++ new_client = &info->client;
++ new_client->addr = address;
++ new_client->adapter = adapter;
++ new_client->driver = &eeprom_driver;
++ new_client->flags = 0;
++ strlcpy(new_client->name, "eeprom", I2C_NAME_SIZE);
++ mutex_init(&info->update_lock);
++ i2c_set_clientdata(new_client, info);
++ err = i2c_attach_client(new_client);
++ if (err)
++ goto exit_kfree;
++ eeprom_attr.size = ei_pt->total_size;
++ err = sysfs_create_bin_file(&new_client->dev.kobj, &eeprom_attr);
++ if (err)
++ goto exit_detach;
++ err = sysfs_create_file(&new_client->dev.kobj, &dev_attr_chip.attr);
++ if (err)
++ goto exit_detach2;
++ return 0;
++exit_detach2:
++ sysfs_remove_bin_file(&new_client->dev.kobj, &eeprom_attr);
++exit_detach:
++ i2c_detach_client(new_client);
++exit_kfree:
++ kfree(info);
++exit:
++ return err;
++}
++
++static int eeprom_attach_adapter(struct i2c_adapter *adapter)
++{
++ return(i2c_probe(adapter, &addr_data, eeprom_detect));
++}
++
++static int eeprom_detach_client(struct i2c_client *client)
++{
++ int err;
++ sysfs_remove_bin_file(&client->dev.kobj, &eeprom_attr);
++ sysfs_remove_file(&client->dev.kobj, &dev_attr_chip.attr);
++ err = i2c_detach_client(client);
++ if (err)
++ return(err);
++ kfree(i2c_get_clientdata(client));
++ return 0;
++}
++
++static int __init eeprom_init(void)
++{
++ return(i2c_add_driver(&eeprom_driver));
++}
++
++static void __exit eeprom_exit(void)
++{
++ i2c_del_driver(&eeprom_driver);
++}
++
++MODULE_AUTHOR("Davide Rizzo <[EMAIL PROTECTED]>");
++MODULE_DESCRIPTION("I2C EEPROM driver");
++MODULE_LICENSE("GPL");
++
++module_init(eeprom_init);
++module_exit(eeprom_exit);
++
+Index: linux-2.6.26-NEW/drivers/i2c/chips/Kconfig
+===================================================================
+--- linux-2.6.26-NEW.orig/drivers/i2c/chips/Kconfig
++++ linux-2.6.26-NEW/drivers/i2c/chips/Kconfig
+@@ -148,4 +148,12 @@ config MENELAUS
+ and other features that are often used in portable devices like
+ cell phones and PDAs.
+
++config EEPROM_RW
++ tristate "EEPROM"
++ help
++ If you say yes here you get read/write access to the EEPROM data
++
++ This driver can also be built as a module. If so, the module
++ will be called eeprom-rw.
++
+ endmenu
diff --git a/recipes/linux/linux-2.6.26/boc01/007-081216-lm73.patch b/recipes/linux/linux-2.6.26/boc01/007-081216-lm73.patch
new file mode 100644
index 0000000000..93d1a18121
--- /dev/null
+++ b/recipes/linux/linux-2.6.26/boc01/007-081216-lm73.patch
@@ -0,0 +1,278 @@
+Index: linux-2.6.26-NEW/drivers/hwmon/Kconfig
+===================================================================
+--- linux-2.6.26-NEW.orig/drivers/hwmon/Kconfig
++++ linux-2.6.26-NEW/drivers/hwmon/Kconfig
+@@ -390,6 +390,15 @@ config SENSORS_LM70
+ This driver can also be built as a module. If so, the module
+ will be called lm70.
+
++config SENSORS_LM73
++ tristate "National Semiconductor LM73"
++ depends on I2C
++ help
++ If you say yes here you get support for National Semiconductor LM73
++ sensor chips
++ This driver can also be built as a module. If so, the module
++ will be called lm73.
++
+ config SENSORS_LM75
+ tristate "National Semiconductor LM75 and compatibles"
+ depends on I2C
+Index: linux-2.6.26-NEW/drivers/hwmon/Makefile
+===================================================================
+--- linux-2.6.26-NEW.orig/drivers/hwmon/Makefile
++++ linux-2.6.26-NEW/drivers/hwmon/Makefile
+@@ -47,6 +47,7 @@ obj-$(CONFIG_SENSORS_IT87) += it87.o
+ obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o
+ obj-$(CONFIG_SENSORS_LM63) += lm63.o
+ obj-$(CONFIG_SENSORS_LM70) += lm70.o
++obj-$(CONFIG_SENSORS_LM73) += lm73.o
+ obj-$(CONFIG_SENSORS_LM75) += lm75.o
+ obj-$(CONFIG_SENSORS_LM77) += lm77.o
+ obj-$(CONFIG_SENSORS_LM78) += lm78.o
+Index: linux-2.6.26-NEW/drivers/hwmon/lm73.c
+===================================================================
+--- /dev/null
++++ linux-2.6.26-NEW/drivers/hwmon/lm73.c
+@@ -0,0 +1,241 @@
++ /*
++ * LM73 Sensor driver
++ * Based on LM75
++ *
++ *
++ * Copyright (C) 2007, CenoSYS (www.cenosys.com).
++ * Guillaume Ligneul
++ * Guillaume.ligneul@gmail.com
++ *
++ * This software program is licensed subject to the GNU General Public License
++ * (GPL).Version 2,June 1991, available at http://www.fsf.org/copyleft/gpl.html
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/slab.h>
++#include <linux/jiffies.h>
++#include <linux/i2c.h>
++#include <linux/hwmon.h>
++#include <linux/hwmon-sysfs.h>
++#include <linux/err.h>
++#include <linux/mutex.h>
++
++
++/* Addresses to scan */
++static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
++ 0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
++
++/* Insmod parameters */
++I2C_CLIENT_INSMOD_1(lm73);
++
++/* LM73 registers */
++#define LM73_REG_INPUT 0x00
++#define LM73_REG_CONF 0x01
++#define LM73_REG_T_HIGH 0x02
++#define LM73_REG_T_LOW 0x03
++
++static const u8 LM73_REG_TEMP[3] = {
++ LM73_REG_INPUT, /* input */
++ LM73_REG_T_HIGH, /* max */
++ LM73_REG_T_LOW, /* min */
++};
++
++/* Each client has this additional data */
++struct lm73_data {
++ struct i2c_client client;
++ struct device *hwmon_dev;
++ struct mutex update_lock;
++ char valid; /* !=0 if following fields are valid */
++ unsigned long last_updated; /* In jiffies */
++ u16 temp[3]; /* Register values,
++ 0 = input
++ 1 = max
++ 2 = min */
++};
++
++static int lm73_attach_adapter(struct i2c_adapter *adapter);
++static int lm73_detect(struct i2c_adapter *adapter, int address, int kind);
++static int lm73_detach_client(struct i2c_client *client);
++static int lm73_read_value(struct i2c_client *client, u8 reg);
++static int lm73_write_value(struct i2c_client *client, u8 reg, short value);
++
++/* This is the driver that will be inserted */
++static struct i2c_driver lm73_driver = {
++ .driver = {
++ .name = "lm73",
++ },
++ .attach_adapter = lm73_attach_adapter,
++ .detach_client = lm73_detach_client,
++};
++
++static ssize_t show_temp(struct device *dev, struct device_attribute *da,
++ char *buf)
++{
++ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
++ struct i2c_client *client = to_i2c_client(dev);
++ int iTemp = 0;
++
++ iTemp = lm73_read_value(client, LM73_REG_TEMP[attr->index]);
++
++ return sprintf(buf, "%d\n", iTemp);
++
++
++}
++
++static ssize_t set_temp(struct device *dev, struct device_attribute *da,
++ const char *buf, size_t count)
++{
++ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
++ struct i2c_client *client = to_i2c_client(dev);
++ int nr = attr->index;
++
++ long tmp = simple_strtol(buf, NULL, 10);
++
++ lm73_write_value(client, LM73_REG_TEMP[nr], tmp);
++ return count;
++}
++
++static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
++ show_temp, set_temp, 1);
++static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO,
++ show_temp, set_temp, 2);
++static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
++
++static int lm73_attach_adapter(struct i2c_adapter *adapter)
++{
++ if (!(adapter->class & I2C_CLASS_HWMON))
++ return 0;
++
++ return i2c_probe(adapter, &addr_data, lm73_detect);
++}
++
++static struct attribute *lm73_attributes[] = {
++ &sensor_dev_attr_temp1_input.dev_attr.attr,
++ &sensor_dev_attr_temp1_max.dev_attr.attr,
++ &sensor_dev_attr_temp1_min.dev_attr.attr,
++
++ NULL
++};
++
++static const struct attribute_group lm73_group = {
++ .attrs = lm73_attributes,
++};
++
++/* This function is called by i2c_probe */
++static int lm73_detect(struct i2c_adapter *adapter, int address, int kind)
++{
++ struct i2c_client *new_client;
++ struct lm73_data *data;
++ int err = 0;
++ const char *name = "";
++
++ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
++ I2C_FUNC_SMBUS_WORD_DATA))
++ goto exit;
++
++ if (!(data = kzalloc(sizeof(struct lm73_data), GFP_KERNEL))) {
++ err = -ENOMEM;
++ goto exit;
++ }
++
++ new_client = &data->client;
++ i2c_set_clientdata(new_client, data);
++ new_client->addr = address;
++ new_client->adapter = adapter;
++ new_client->driver = &lm73_driver;
++ new_client->flags = 0;
++
++ name = "lm73";
++
++ /* Fill in the remaining client fields and put it into the global list */
++ strlcpy(new_client->name, name, I2C_NAME_SIZE);
++ data->valid = 0;
++ mutex_init(&data->update_lock);
++
++ /* Tell the I2C layer a new client has arrived */
++ if ((err = i2c_attach_client(new_client)))
++ goto exit_free;
++
++ /* Register sysfs hooks */
++ if ((err = sysfs_create_group(&new_client->dev.kobj, &lm73_group)))
++ goto exit_detach;
++
++ data->hwmon_dev = hwmon_device_register(&new_client->dev);
++ if (IS_ERR(data->hwmon_dev)) {
++ err = PTR_ERR(data->hwmon_dev);
++ goto exit_remove;
++ }
++
++ return 0;
++
++exit_remove:
++ sysfs_remove_group(&new_client->dev.kobj, &lm73_group);
++exit_detach:
++ i2c_detach_client(new_client);
++exit_free:
++ kfree(data);
++exit:
++ return err;
++}
++
++static int lm73_detach_client(struct i2c_client *client)
++{
++ struct lm73_data *data = i2c_get_clientdata(client);
++ hwmon_device_unregister(data->hwmon_dev);
++ sysfs_remove_group(&client->dev.kobj, &lm73_group);
++ i2c_detach_client(client);
++ kfree(data);
++ return 0;
++}
++
++static int lm73_read_value(struct i2c_client *client, u8 reg)
++{
++ short sVal;
++
++ if (reg == LM73_REG_CONF)
++ return i2c_smbus_read_byte_data(client, reg);
++ else
++ {
++ sVal = swab16(i2c_smbus_read_word_data(client, reg));
++ sVal = sVal >> 7;
++
++ if ( sVal & 0xFFFF ) {
++ sVal = sVal - 0x1;
++ sVal = ~sVal;
++
++ return -sVal;
++ }
++ else {
++ return sVal;
++ }
++ }
++}
++
++static int lm73_write_value(struct i2c_client *client, u8 reg, short value)
++{
++ if (reg == LM73_REG_CONF)
++ return i2c_smbus_write_byte_data(client, reg, value);
++ else
++ {
++ value = value<<7;
++ return i2c_smbus_write_word_data(client, reg, swab16(value));
++ }
++}
++
++static int __init sensors_lm73_init(void)
++{
++ return i2c_add_driver(&lm73_driver);
++}
++
++static void __exit sensors_lm73_exit(void)
++{
++ i2c_del_driver(&lm73_driver);
++}
++
++MODULE_AUTHOR("Ligneul Guillaume <guillaume.ligneul@gmail.com>");
++MODULE_DESCRIPTION("LM73 driver");
++MODULE_LICENSE("GPL");
++
++module_init(sensors_lm73_init);
++module_exit(sensors_lm73_exit);
diff --git a/recipes/linux/linux-2.6.26/boc01/008-081127-spi.patch b/recipes/linux/linux-2.6.26/boc01/008-081127-spi.patch
new file mode 100644
index 0000000000..41777a5753
--- /dev/null
+++ b/recipes/linux/linux-2.6.26/boc01/008-081127-spi.patch
@@ -0,0 +1,327 @@
+--- linux-2.6.26.orig/drivers/spi/spi_mpc83xx.c 2008-07-13 23:51:29.000000000 +0200
++++ linux-2.6.26/drivers/spi/spi_mpc83xx.c 2008-11-26 11:32:07.000000000 +0100
+@@ -27,6 +27,8 @@
+ #include <asm/irq.h>
+ #include <asm/io.h>
+
++//#define DBG_SPI 1
++
+ /* SPI Controller registers */
+ struct mpc83xx_spi_reg {
+ u8 res1[0x20];
+@@ -114,6 +116,7 @@
+
+ static inline void mpc83xx_spi_write_reg(__be32 __iomem * reg, u32 val)
+ {
++
+ out_be32(reg, val);
+ }
+
+@@ -157,11 +160,17 @@
+
+ mpc83xx_spi = spi_master_get_devdata(spi->master);
+
++#ifdef DBG_SPI
++printk(KERN_INFO "mpc83xx_spi_chipselect (163)\n");
++#endif DBG_SPI
++
+ if (value == BITBANG_CS_INACTIVE) {
+ if (mpc83xx_spi->deactivate_cs)
+ mpc83xx_spi->deactivate_cs(spi->chip_select, pol);
+ }
+-
++#ifdef DBG_SPI
++printk(KERN_INFO "mpc83xx_spi_chipselect (171)\n");
++#endif DBG_SPI
+ if (value == BITBANG_CS_ACTIVE) {
+ u32 regval = mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
+
+@@ -171,6 +180,9 @@
+ mpc83xx_spi->get_tx = cs->get_tx;
+
+ if (cs->hw_mode != regval) {
++#ifdef DBG_SPI
++printk(KERN_INFO "mpc83xx_spi_chipselect (184)\n");
++#endif DBG_SPI
+ unsigned long flags;
+ void *tmp_ptr = &mpc83xx_spi->base->mode;
+
+@@ -184,6 +196,9 @@
+ mpc83xx_spi_write_reg(tmp_ptr, regval);
+ local_irq_restore(flags);
+ }
++#ifdef DBG_SPI
++printk(KERN_INFO "mpc83xx_spi_chipselect (196)\n");
++#endif DBG_SPI
+ if (mpc83xx_spi->activate_cs)
+ mpc83xx_spi->activate_cs(spi->chip_select, pol);
+ }
+@@ -266,26 +281,38 @@
+
+ cs->hw_mode |= SPMODE_LEN(bits_per_word);
+
+- if ((mpc83xx_spi->spibrg / hz) >= 64) {
++ /*if ((mpc83xx_spi->spibrg / hz) >= 64) {
+ pm = mpc83xx_spi->spibrg / (hz * 64) - 1;
+- if (pm > 0x0f) {
++ if (pm > 0x0f) {*/
++ if ((mpc83xx_spi->spibrg / hz) > 64) {
++ cs->hw_mode |= SPMODE_DIV16;
++ pm = mpc83xx_spi->spibrg / (hz * 64);
++ if (pm > 16) {
+ dev_err(&spi->dev, "Requested speed is too "
+ "low: %d Hz. Will use %d Hz instead.\n",
+ hz, mpc83xx_spi->spibrg / 1024);
+- pm = 0x0f;
++ pm = 16;
+ }
+- cs->hw_mode |= SPMODE_PM(pm) | SPMODE_DIV16;
+- } else {
++ //cs->hw_mode |= SPMODE_PM(pm) | SPMODE_DIV16;
++ } else
+ pm = mpc83xx_spi->spibrg / (hz * 4);
+- if (pm)
+- pm--;
+- cs->hw_mode |= SPMODE_PM(pm);
+- }
++ if (pm)
++ pm--;
++ cs->hw_mode = 0x0F700000;
++ mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode,cs->hw_mode);
+ regval = mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
++#ifdef DBG_SPI
++printk("mpc83xx_spi_setup_transfer regval=%4X\n",regval);
++#endif
++
++
++
+ if (cs->hw_mode != regval) {
+ unsigned long flags;
+ void *tmp_ptr = &mpc83xx_spi->base->mode;
+-
++#ifdef DBG_SPI
++printk("mpc83xx_spi_setup_transfer cs->hw_mode=%4X\n",cs->hw_mode);
++#endif
+ regval = cs->hw_mode;
+ /* Turn off IRQs locally to minimize time
+ * that SPI is disabled
+@@ -322,15 +349,24 @@
+ /* enable rx ints */
+ mpc83xx_spi_write_reg(&mpc83xx_spi->base->mask, SPIM_NE);
+
++#ifdef DBG_SPI
++printk(KERN_INFO "mpc83xx_spi_bufs (338)\n");
++#endif
++
+ /* transmit word */
+ word = mpc83xx_spi->get_tx(mpc83xx_spi);
+- mpc83xx_spi_write_reg(&mpc83xx_spi->base->transmit, word);
+
++ mpc83xx_spi_write_reg(&mpc83xx_spi->base->transmit, word);
++#ifdef DBG_SPI
++printk(KERN_INFO "mpc83xx_spi_bufs (345)\n");
++#endif
+ wait_for_completion(&mpc83xx_spi->done);
+
+ /* disable rx ints */
+ mpc83xx_spi_write_reg(&mpc83xx_spi->base->mask, 0);
+-
++#ifdef DBG_SPI
++printk(KERN_INFO "mpc83xx_spi_bufs (352)\n");
++#endif
+ return mpc83xx_spi->count;
+ }
+
+@@ -360,15 +396,22 @@
+ if (t->bits_per_word || t->speed_hz) {
+ /* Don't allow changes if CS is active */
+ status = -EINVAL;
+-
++#ifdef DBG_SPI
++printk(KERN_INFO "mpc83xx_spi_work (366)\n");
++#endif
+ if (cs_change)
+ status = mpc83xx_spi_setup_transfer(spi, t);
+ if (status < 0)
+ break;
+ }
+-
++#ifdef DBG_SPI
++printk(KERN_INFO "mpc83xx_spi_work (374)\n");
++#endif
+ if (cs_change)
+ mpc83xx_spi_chipselect(spi, BITBANG_CS_ACTIVE);
++#ifdef DBG_SPI
++printk(KERN_INFO "mpc83xx_spi_work (379)\n");
++#endif
+ cs_change = t->cs_change;
+ if (t->len)
+ status = mpc83xx_spi_bufs(spi, t);
+@@ -439,26 +482,39 @@
+ cs->hw_mode = mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
+ /* mask out bits we are going to set */
+ cs->hw_mode &= ~(SPMODE_CP_BEGIN_EDGECLK | SPMODE_CI_INACTIVEHIGH
+- | SPMODE_REV | SPMODE_LOOP);
+-
+- if (spi->mode & SPI_CPHA)
++ | SPMODE_REV);
++#ifdef DBG_SPI
++printk("mpc83xx_spi_setup (475) cs->hw_mode=0x%4X\n",cs->hw_mode);
++#endif
++ /*if (spi->mode & SPI_CPHA)
+ cs->hw_mode |= SPMODE_CP_BEGIN_EDGECLK;
+ if (spi->mode & SPI_CPOL)
+ cs->hw_mode |= SPMODE_CI_INACTIVEHIGH;
+ if (!(spi->mode & SPI_LSB_FIRST))
+- cs->hw_mode |= SPMODE_REV;
+- if (spi->mode & SPI_LOOP)
+- cs->hw_mode |= SPMODE_LOOP;
++ cs->hw_mode |= SPMODE_REV;*/
++ //if (spi->mode & SPI_LOOP)
++ // cs->hw_mode |= SPMODE_LOOP;
++cs->hw_mode = 0x0F700000;
++mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode,cs->hw_mode);
++cs->hw_mode = mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
++
+
++#ifdef DBG_SPI
++printk("mpc83xx_spi_setup (486) cs->hw_mode=0x%4X\n",cs->hw_mode);
++#endif
+ retval = mpc83xx_spi_setup_transfer(spi, NULL);
+ if (retval < 0) {
++#ifdef DBG_SPI
++printk("mpc83xx_spi_setup (491) ");
++#endif
+ cs->hw_mode = hw_mode; /* Restore settings */
+ return retval;
+ }
+-
+- dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u Hz\n",
++#ifdef DBG_SPI
++ printk(KERN_INFO "%s, mode %d, %u bits/w, %u Hz\n",
+ __func__, spi->mode & (SPI_CPOL | SPI_CPHA),
+ spi->bits_per_word, spi->max_speed_hz);
++#endif
+ #if 0 /* Don't think this is needed */
+ /* NOTE we _need_ to call chipselect() early, ideally with adapter
+ * setup, unless the hardware defaults cooperate to avoid confusion
+@@ -518,7 +574,9 @@
+ {
+ struct mpc83xx_spi *mpc83xx_spi = spi_master_get_devdata(spi->master);
+ unsigned long flags;
+-
++#ifdef DBG_SPI
++printk(KERN_INFO "Debut_transfert\n");
++#endif
+ m->actual_length = 0;
+ m->status = -EINPROGRESS;
+
+@@ -600,10 +658,12 @@
+ goto unmap_io;
+ }
+
++printk(KERN_INFO "irq_spi : 0x%2X\n", mpc83xx_spi->irq);
++
+ /* Register for SPI Interrupt */
+ ret = request_irq(mpc83xx_spi->irq, mpc83xx_spi_irq,
+ 0, "mpc83xx_spi", mpc83xx_spi);
+-
++printk(KERN_INFO "irq_spi : 0x%2X\n", mpc83xx_spi->irq);
+ if (ret != 0)
+ goto unmap_io;
+
+@@ -628,7 +688,7 @@
+ INIT_LIST_HEAD(&mpc83xx_spi->queue);
+
+ mpc83xx_spi->workqueue = create_singlethread_workqueue(
+- master->dev.parent->bus_id);
++ dev->dev.bus_id);
+ if (mpc83xx_spi->workqueue == NULL) {
+ ret = -EBUSY;
+ goto free_irq;
+--- linux-2.6.26/arch/powerpc/platforms/83xx/mpc831x_rdb.c 2008-07-13 23:51:29.000000000 +0200
++++ linux-2.6.26.mod/arch/powerpc/platforms/83xx/mpc831x_rdb.c 2008-11-27 11:55:52.000000000 +0100
+@@ -15,16 +15,82 @@
+
+ #include <linux/pci.h>
+ #include <linux/of_platform.h>
+-
++#include <linux/interrupt.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/mmc_spi.h>
++#include <linux/mmc/host.h>
++#include <linux/of_platform.h>
++#include <sysdev/fsl_soc.h>
++#include <asm/qe.h>
++#include <asm/qe_ic.h>
++#include <asm/time.h>
++#include <asm/ipic.h>
++#include <asm/udbg.h>
+ #include <asm/time.h>
+ #include <asm/ipic.h>
+ #include <asm/udbg.h>
++#include <sysdev/fsl_soc.h>
++
+
+ #include "mpc83xx.h"
+
+ /*
+ * Setup the architecture
+ */
++
++struct gpio {
++ __be32 gpdir;
++ __be32 gpodr;
++ __be32 gpdat;
++ __be32 gpier;
++ __be32 gpimr;
++ __be32 gpicr;
++} __attribute__ ((packed));
++static struct gpio *gpio_regs;
++
++static void mpc83xx_spi_activate_cs(u8 cs, u8 polarity)
++{
++ if (polarity)
++ setbits32(&gpio_regs->gpdat, 1 << (31 - 14));
++ else
++ clrbits32(&gpio_regs->gpdat, 1 << (31 - 14));
++}
++
++static void mpc83xx_spi_deactivate_cs(u8 cs, u8 polarity)
++{
++ if (polarity)
++ clrbits32(&gpio_regs->gpdat, 1 << (31 - 14) );
++ else
++ setbits32(&gpio_regs->gpdat, 1 << (31 - 14) );
++
++}
++
++static struct spi_board_info mpc8313_spi_boardinfo = {
++ .bus_num = 0x7000,
++ .chip_select = 0,
++ .max_speed_hz = 50000000,
++ .modalias = "spidev",
++};
++
++static int __init mpc8313_spi_init(void)
++{
++ /* System I/O Configuration Register Low */
++ gpio_regs = ioremap(get_immrbase() + 0xc00, 0x20);
++ if ( !gpio_regs)
++ return -ENOMEM;
++
++ /* set GPIO14 as output */
++ setbits32(&gpio_regs->gpdir, 1 << (31 - 14));
++ clrbits32(&gpio_regs->gpodr, 1 << (31 - 14));
++ setbits32(&gpio_regs->gpdat, 1 << (31 - 14));
++
++ return fsl_spi_init(&mpc8313_spi_boardinfo, 1,
++ mpc83xx_spi_activate_cs,
++ mpc83xx_spi_deactivate_cs);
++}
++
++device_initcall(mpc8313_spi_init);
++
+ static void __init mpc831x_rdb_setup_arch(void)
+ {
+ #ifdef CONFIG_PCI
diff --git a/recipes/linux/linux-2.6.26/boc01/010-081105-mii.patch b/recipes/linux/linux-2.6.26/boc01/010-081105-mii.patch
new file mode 100644
index 0000000000..0ddcba984b
--- /dev/null
+++ b/recipes/linux/linux-2.6.26/boc01/010-081105-mii.patch
@@ -0,0 +1,519 @@
+diff -Nru linux-2.6.26/drivers/net/gianfar.c linux-2.6.26.modified/drivers/net/gianfar.c
+--- linux-2.6.26/drivers/net/gianfar.c 2008-07-13 23:51:29.000000000 +0200
++++ linux-2.6.26.modified/drivers/net/gianfar.c 2008-10-24 13:45:54.000000000 +0200
+@@ -442,10 +442,10 @@
+ static int init_phy(struct net_device *dev)
+ {
+ struct gfar_private *priv = netdev_priv(dev);
+- uint gigabit_support =
+- priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT ?
+- SUPPORTED_1000baseT_Full : 0;
+- struct phy_device *phydev;
++// uint gigabit_support =
++// priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT ?
++// SUPPORTED_1000baseT_Full : 0;
++// struct phy_device *phydev;
+ char phy_id[BUS_ID_SIZE];
+ phy_interface_t interface;
+
+@@ -455,23 +455,23 @@
+
+ snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT, priv->einfo->bus_id, priv->einfo->phy_id);
+
+- interface = gfar_get_interface(dev);
++ interface = PHY_INTERFACE_MODE_MII;//gfar_get_interface(dev);
+
+- phydev = phy_connect(dev, phy_id, &adjust_link, 0, interface);
++// phydev = phy_connect(dev, phy_id, &adjust_link, 0, interface);
+
+- if (interface == PHY_INTERFACE_MODE_SGMII)
+- gfar_configure_serdes(dev);
++// if (interface == PHY_INTERFACE_MODE_SGMII)
++// gfar_configure_serdes(dev);
+
+- if (IS_ERR(phydev)) {
+- printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
+- return PTR_ERR(phydev);
+- }
++// if (IS_ERR(phydev)) {
++// printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
++// return PTR_ERR(phydev);
++// }
+
+ /* Remove any features not supported by the controller */
+- phydev->supported &= (GFAR_SUPPORTED | gigabit_support);
+- phydev->advertising = phydev->supported;
++// phydev->supported &= (GFAR_SUPPORTED | gigabit_support);
++// phydev->advertising = phydev->supported;
+
+- priv->phydev = phydev;
++ //priv->phydev = phydev;
+
+ return 0;
+ }
+@@ -586,7 +586,7 @@
+ struct gfar __iomem *regs = priv->regs;
+ unsigned long flags;
+
+- phy_stop(priv->phydev);
++ //phy_stop(priv->phydev);
+
+ /* Lock it down */
+ spin_lock_irqsave(&priv->txlock, flags);
+@@ -857,7 +857,7 @@
+ }
+ }
+
+- phy_start(priv->phydev);
++ //phy_start(priv->phydev);
+
+ /* Configure the coalescing support */
+ if (priv->txcoalescing)
+@@ -928,7 +928,7 @@
+ tx_irq_fail:
+ free_irq(priv->interruptError, dev);
+ err_irq_fail:
+-err_rxalloc_fail:
++err_rxalloc_fail:
+ rx_skb_fail:
+ free_skb_resources(priv);
+ tx_skb_fail:
+@@ -1135,8 +1135,8 @@
+ stop_gfar(dev);
+
+ /* Disconnect from the PHY */
+- phy_disconnect(priv->phydev);
+- priv->phydev = NULL;
++ //phy_disconnect(priv->phydev);
++ //priv->phydev = NULL;
+
+ netif_stop_queue(dev);
+
+@@ -1723,81 +1723,82 @@
+ * function converts those variables into the appropriate
+ * register values, and can bring down the device if needed.
+ */
+-static void adjust_link(struct net_device *dev)
+-{
+- struct gfar_private *priv = netdev_priv(dev);
+- struct gfar __iomem *regs = priv->regs;
+- unsigned long flags;
+- struct phy_device *phydev = priv->phydev;
+- int new_state = 0;
+-
+- spin_lock_irqsave(&priv->txlock, flags);
+- if (phydev->link) {
+- u32 tempval = gfar_read(&regs->maccfg2);
+- u32 ecntrl = gfar_read(&regs->ecntrl);
+-
+- /* Now we make sure that we can be in full duplex mode.
+- * If not, we operate in half-duplex mode. */
+- if (phydev->duplex != priv->oldduplex) {
+- new_state = 1;
+- if (!(phydev->duplex))
+- tempval &= ~(MACCFG2_FULL_DUPLEX);
+- else
+- tempval |= MACCFG2_FULL_DUPLEX;
+-
+- priv->oldduplex = phydev->duplex;
+- }
+-
+- if (phydev->speed != priv->oldspeed) {
+- new_state = 1;
+- switch (phydev->speed) {
+- case 1000:
+- tempval =
+- ((tempval & ~(MACCFG2_IF)) | MACCFG2_GMII);
+- break;
+- case 100:
+- case 10:
+- tempval =
+- ((tempval & ~(MACCFG2_IF)) | MACCFG2_MII);
+-
+- /* Reduced mode distinguishes
+- * between 10 and 100 */
+- if (phydev->speed == SPEED_100)
+- ecntrl |= ECNTRL_R100;
+- else
+- ecntrl &= ~(ECNTRL_R100);
+- break;
+- default:
+- if (netif_msg_link(priv))
+- printk(KERN_WARNING
+- "%s: Ack! Speed (%d) is not 10/100/1000!\n",
+- dev->name, phydev->speed);
+- break;
+- }
+-
+- priv->oldspeed = phydev->speed;
+- }
+-
+- gfar_write(&regs->maccfg2, tempval);
+- gfar_write(&regs->ecntrl, ecntrl);
+-
+- if (!priv->oldlink) {
+- new_state = 1;
+- priv->oldlink = 1;
+- netif_schedule(dev);
+- }
+- } else if (priv->oldlink) {
+- new_state = 1;
+- priv->oldlink = 0;
+- priv->oldspeed = 0;
+- priv->oldduplex = -1;
+- }
+-
+- if (new_state && netif_msg_link(priv))
+- phy_print_status(phydev);
+-
+- spin_unlock_irqrestore(&priv->txlock, flags);
+-}
++//static void adjust_link(struct net_device *dev)
++//{
++// struct gfar_private *priv = netdev_priv(dev);
++// struct gfar __iomem *regs = priv->regs;
++// unsigned long flags;
++// struct phy_device *phydev = priv->phydev;
++// int new_state = 0;
++//
++//
++// spin_lock_irqsave(&priv->txlock, flags);
++// if (phydev->link) {
++// u32 tempval = gfar_read(&regs->maccfg2);
++// u32 ecntrl = gfar_read(&regs->ecntrl);
++//
++// /* Now we make sure that we can be in full duplex mode.
++// * If not, we operate in half-duplex mode. */
++// if (phydev->duplex != priv->oldduplex) {
++// new_state = 1;
++// if (!(phydev->duplex))
++// tempval &= ~(MACCFG2_FULL_DUPLEX);
++// else
++// tempval |= MACCFG2_FULL_DUPLEX;
++//
++// priv->oldduplex = phydev->duplex;
++// }
++//
++// if (phydev->speed != priv->oldspeed) {
++// new_state = 1;
++// switch (phydev->speed) {
++// case 1000:
++// tempval =
++// ((tempval & ~(MACCFG2_IF)) | MACCFG2_GMII);
++// break;
++// case 100:
++// case 10:
++// tempval =
++// ((tempval & ~(MACCFG2_IF)) | MACCFG2_MII);
++//
++// /* Reduced mode distinguishes
++// * between 10 and 100 */
++// if (phydev->speed == SPEED_100)
++// ecntrl |= ECNTRL_R100;
++// else
++// ecntrl &= ~(ECNTRL_R100);
++// break;
++// default:
++// if (netif_msg_link(priv))
++// printk(KERN_WARNING
++// "%s: Ack! Speed (%d) is not 10/100/1000!\n",
++// dev->name, phydev->speed);
++// break;
++// }
++//
++// priv->oldspeed = phydev->speed;
++// }
++//
++// gfar_write(&regs->maccfg2, tempval);
++// gfar_write(&regs->ecntrl, ecntrl);
++//
++// if (!priv->oldlink) {
++// new_state = 1;
++// priv->oldlink = 1;
++// netif_schedule(dev);
++// }
++// } else if (priv->oldlink) {
++// new_state = 1;
++// priv->oldlink = 0;
++// priv->oldspeed = 0;
++// priv->oldduplex = -1;
++// }
++//
++// if (new_state && netif_msg_link(priv))
++// phy_print_status(phydev);
++//
++// spin_unlock_irqrestore(&priv->txlock, flags);
++//}
+
+ /* Update the hash table based on the current list of multicast
+ * addresses we subscribe to. Also, change the promiscuity of
+diff -Nru linux-2.6.26/drivers/net/gianfar_ethtool.c linux-2.6.26.modified/drivers/net/gianfar_ethtool.c
+--- linux-2.6.26/drivers/net/gianfar_ethtool.c 2008-07-13 23:51:29.000000000 +0200
++++ linux-2.6.26.modified/drivers/net/gianfar_ethtool.c 2008-10-24 13:45:49.000000000 +0200
+@@ -182,13 +182,13 @@
+
+ static int gfar_ssettings(struct net_device *dev, struct ethtool_cmd *cmd)
+ {
+- struct gfar_private *priv = netdev_priv(dev);
+- struct phy_device *phydev = priv->phydev;
+-
+- if (NULL == phydev)
+- return -ENODEV;
+-
+- return phy_ethtool_sset(phydev, cmd);
++// struct gfar_private *priv = netdev_priv(dev);
++// struct phy_device *phydev = priv->phydev;
++//
++// if (NULL == phydev)
++// return -ENODEV;
++//
++ return 0;//phy_ethtool_sset(phydev, cmd);
+ }
+
+
+@@ -196,15 +196,15 @@
+ static int gfar_gsettings(struct net_device *dev, struct ethtool_cmd *cmd)
+ {
+ struct gfar_private *priv = netdev_priv(dev);
+- struct phy_device *phydev = priv->phydev;
+-
+- if (NULL == phydev)
+- return -ENODEV;
++// struct phy_device *phydev = priv->phydev;
++//
++// if (NULL == phydev)
++// return -ENODEV;
+
+ cmd->maxtxpkt = priv->txcount;
+ cmd->maxrxpkt = priv->rxcount;
+
+- return phy_ethtool_gset(phydev, cmd);
++ return 0;//phy_ethtool_gset(phydev, cmd);
+ }
+
+ /* Return the length of the register structure */
+@@ -232,19 +232,19 @@
+ unsigned int count;
+
+ /* The timer is different, depending on the interface speed */
+- switch (priv->phydev->speed) {
+- case SPEED_1000:
+- count = GFAR_GBIT_TIME;
+- break;
+- case SPEED_100:
++// switch (priv->phydev->speed) {
++// case SPEED_1000:
++// count = GFAR_GBIT_TIME;
++// break;
++// case SPEED_100:
++// count = GFAR_100_TIME;
++// break;
++// case SPEED_10:
++// default:
+ count = GFAR_100_TIME;
+- break;
+- case SPEED_10:
+- default:
+- count = GFAR_10_TIME;
+- break;
+- }
+-
++// break;
++// }
++//
+ /* Make sure we return a number greater than 0
+ * if usecs > 0 */
+ return ((usecs * 1000 + count - 1) / count);
+@@ -256,19 +256,19 @@
+ unsigned int count;
+
+ /* The timer is different, depending on the interface speed */
+- switch (priv->phydev->speed) {
+- case SPEED_1000:
+- count = GFAR_GBIT_TIME;
+- break;
+- case SPEED_100:
++// switch (priv->phydev->speed) {
++// case SPEED_1000:
++// count = GFAR_GBIT_TIME;
++// break;
++// case SPEED_100:
++// count = GFAR_100_TIME;
++// break;
++// case SPEED_10:
++// default:
+ count = GFAR_100_TIME;
+- break;
+- case SPEED_10:
+- default:
+- count = GFAR_10_TIME;
+- break;
+- }
+-
++// break;
++// }
++//
+ /* Make sure we return a number greater than 0 */
+ /* if ticks is > 0 */
+ return ((ticks * count) / 1000);
+@@ -283,8 +283,8 @@
+ if (!(priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_COALESCE))
+ return -EOPNOTSUPP;
+
+- if (NULL == priv->phydev)
+- return -ENODEV;
++// if (NULL == priv->phydev)
++// return -ENODEV;
+
+ cvals->rx_coalesce_usecs = gfar_ticks2usecs(priv, priv->rxtime);
+ cvals->rx_max_coalesced_frames = priv->rxcount;
+@@ -342,8 +342,8 @@
+ else
+ priv->rxcoalescing = 1;
+
+- if (NULL == priv->phydev)
+- return -ENODEV;
++// if (NULL == priv->phydev)
++// return -ENODEV;
+
+ /* Check the bounds of the values */
+ if (cvals->rx_coalesce_usecs > GFAR_MAX_COAL_USECS) {
+diff -Nru linux-2.6.26/drivers/net/gianfar.h linux-2.6.26.modified/drivers/net/gianfar.h
+--- linux-2.6.26/drivers/net/gianfar.h 2008-07-13 23:51:29.000000000 +0200
++++ linux-2.6.26.modified/drivers/net/gianfar.h 2008-10-24 13:45:55.000000000 +0200
+@@ -161,7 +161,7 @@
+ #define MACCFG1_SYNCD_TX_EN 0x00000002
+ #define MACCFG1_TX_EN 0x00000001
+
+-#define MACCFG2_INIT_SETTINGS 0x00007205
++#define MACCFG2_INIT_SETTINGS 0x00007105
+ #define MACCFG2_FULL_DUPLEX 0x00000001
+ #define MACCFG2_IF 0x00000300
+ #define MACCFG2_MII 0x00000100
+@@ -751,7 +751,7 @@
+ struct gianfar_platform_data *einfo;
+
+ /* PHY stuff */
+- struct phy_device *phydev;
++// struct phy_device *phydev;
+ struct mii_bus *mii_bus;
+ int oldspeed;
+ int oldduplex;
+diff -Nru linux-2.6.26/drivers/net/gianfar_mii.c linux-2.6.26.modified/drivers/net/gianfar_mii.c
+--- linux-2.6.26/drivers/net/gianfar_mii.c 2008-07-13 23:51:29.000000000 +0200
++++ linux-2.6.26.modified/drivers/net/gianfar_mii.c 2008-10-24 13:45:45.000000000 +0200
+@@ -216,24 +216,24 @@
+ r = get_phy_id(new_bus, i, &phy_id);
+ if (r)
+ return r;
+-
+- if (phy_id == 0xffffffff)
+- break;
++printk(KERN_INFO "0x%8X\n",phy_id);
++// if (phy_id == 0xffffffff)
++// break;
+ }
+
+ /* The bus is full. We don't support using 31 PHYs, sorry */
+- if (i == 0)
+- return -EBUSY;
+-
+- gfar_write(&enet_regs->tbipa, i);
+-
+- err = mdiobus_register(new_bus);
+-
+- if (0 != err) {
+- printk (KERN_ERR "%s: Cannot register as MDIO bus\n",
+- new_bus->name);
+- goto bus_register_fail;
+- }
++// if (i == 0)
++// return -EBUSY;
++//
++// gfar_write(&enet_regs->tbipa, i);
++//
++// err = mdiobus_register(new_bus);
++//
++// if (0 != err) {
++// printk (KERN_ERR "%s: Cannot register as MDIO bus\n",
++// new_bus->name);
++// goto bus_register_fail;
++// }
+
+ return 0;
+
+diff -Nru linux-2.6.26/drivers/net/gianfar_mii.h linux-2.6.26.modified/drivers/net/gianfar_mii.h
+--- linux-2.6.26/drivers/net/gianfar_mii.h 2008-07-13 23:51:29.000000000 +0200
++++ linux-2.6.26.modified/drivers/net/gianfar_mii.h 2008-10-24 13:45:45.000000000 +0200
+@@ -25,9 +25,6 @@
+
+ #define GFAR_SUPPORTED (SUPPORTED_10baseT_Half \
+ | SUPPORTED_10baseT_Full \
+- | SUPPORTED_100baseT_Half \
+- | SUPPORTED_100baseT_Full \
+- | SUPPORTED_Autoneg \
+ | SUPPORTED_MII)
+
+ struct gfar_mii {
+--- linux-2.6.26/drivers/net/phy/mdio_bus.c 2008-07-13 23:51:29.000000000 +0200
++++ linux-2.6.26.modified/drivers/net/phy/mdio_bus.c 2008-10-24 13:45:39.000000000 +0200
+@@ -135,6 +135,9 @@
+ struct phy_device *phydev = to_phy_device(dev);
+ struct phy_driver *phydrv = to_phy_driver(drv);
+
++ if (phydrv->detect)
++ return (phydrv->detect(phydev->bus, phydev->addr));
++
+ return ((phydrv->phy_id & phydrv->phy_id_mask) ==
+ (phydev->phy_id & phydrv->phy_id_mask));
+ }
+diff -Nru linux-2.6.26/drivers/net/phy/phy_device.c linux-2.6.26.modified/drivers/net/phy/phy_device.c
+--- linux-2.6.26/drivers/net/phy/phy_device.c 2008-07-13 23:51:29.000000000 +0200
++++ linux-2.6.26.modified/drivers/net/phy/phy_device.c 2008-10-24 13:45:39.000000000 +0200
+@@ -281,7 +281,9 @@
+ if (IS_ERR(phydev))
+ return phydev;
+
+- phy_prepare_link(phydev, handler);
++ //cenoys
++ //phy_prepare_link(phydev, handler);
++ phydev->link = 1;
+
+ phy_start_machine(phydev, NULL);
+
+@@ -302,7 +304,7 @@
+ phy_stop_interrupts(phydev);
+
+ phy_stop_machine(phydev);
+-
++
+ phydev->adjust_link = NULL;
+
+ phy_detach(phydev);
+@@ -438,7 +440,7 @@
+ if (adv < 0)
+ return adv;
+
+- adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP |
++ adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP |
+ ADVERTISE_PAUSE_ASYM);
+ if (advertise & ADVERTISED_10baseT_Half)
+ adv |= ADVERTISE_10HALF;
+@@ -503,7 +505,7 @@
+
+ if (DUPLEX_FULL == phydev->duplex)
+ ctl |= BMCR_FULLDPLX;
+-
++
+ err = phy_write(phydev, MII_BMCR, ctl);
+
+ if (err < 0)
+@@ -671,7 +673,7 @@
+ phydev->duplex = DUPLEX_FULL;
+ } else if (lpa & (LPA_100FULL | LPA_100HALF)) {
+ phydev->speed = SPEED_100;
+-
++
+ if (lpa & LPA_100FULL)
+ phydev->duplex = DUPLEX_FULL;
+ } else
diff --git a/recipes/linux/linux-2.6.26/boc01/011-081202-gpio.patch b/recipes/linux/linux-2.6.26/boc01/011-081202-gpio.patch
new file mode 100644
index 0000000000..e106526b93
--- /dev/null
+++ b/recipes/linux/linux-2.6.26/boc01/011-081202-gpio.patch
@@ -0,0 +1,365 @@
+diff -Nru linux-2.6.26-010/drivers/char/Kconfig linux-2.6.26-011/drivers/char/Kconfig
+--- linux-2.6.26-010/drivers/char/Kconfig 2008-07-13 23:51:29.000000000 +0200
++++ linux-2.6.26-011/drivers/char/Kconfig 2008-12-02 09:45:08.000000000 +0100
+@@ -1006,6 +1006,23 @@
+ tristate "NEC VR4100 series General-purpose I/O Unit support"
+ depends on CPU_VR41XX
+
++config GPIO_MPC8313
++ tristate "mpc8313e gpio"
++ depends on PPC_MPC831x
++ select INPUT
++ default y
++ help
++ Give userspace access to the GPIO pins on the MPC8313E devices.
++
++config EXIO_MPC8313
++ tristate "mpc8313e exio"
++ depends on PPC_MPC831x
++ select INPUT
++ default y
++ help
++ Give userspace access to the Extenrder IO pins on the CPE board.
++
++
+ config RAW_DRIVER
+ tristate "RAW driver (/dev/raw/rawN)"
+ depends on BLOCK
+diff -Nru linux-2.6.26-010/drivers/char/Makefile linux-2.6.26-011/drivers/char/Makefile
+--- linux-2.6.26-010/drivers/char/Makefile 2008-07-13 23:51:29.000000000 +0200
++++ linux-2.6.26-011/drivers/char/Makefile 2008-12-02 09:45:25.000000000 +0100
+@@ -111,6 +111,8 @@
+ obj-$(CONFIG_PS3_FLASH) += ps3flash.o
+
+ obj-$(CONFIG_JS_RTC) += js-rtc.o
++obj-$(CONFIG_GPIO_MPC8313) += mpc8313e_gpio.o
++obj-$(CONFIG_EXIO_MPC8313) += mpc8313e_exio.o
+ js-rtc-y = rtc.o
+
+ # Files generated that shall be removed upon make clean
+diff -Nru linux-2.6.26-010/drivers/char/mpc8313e_exio.c linux-2.6.26-011/drivers/char/mpc8313e_exio.c
+--- linux-2.6.26-010/drivers/char/mpc8313e_exio.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.26-011/drivers/char/mpc8313e_exio.c 2008-12-02 10:46:31.000000000 +0100
+@@ -0,0 +1,170 @@
++/*
++* CPE Extender io driver
++*
++*
++* Copyright (C) 2007, CenoSYS (www.cenosys.com).
++* Alexandre Coffignal
++* alexandre.coffignal@cenosys.com
++*
++* This software program is licensed subject to the GNU General Public License
++* (GPL).Version 2,June 1991, available at http://www.fsf.org/copyleft/gpl.html
++*
++* Allows a user space process to control the EXIO pins.
++*
++*/
++
++#include <linux/fs.h>
++#include <linux/module.h>
++#include <linux/errno.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <asm/uaccess.h>
++#include <asm/io.h>
++#include <linux/of_platform.h>
++#include <sysdev/fsl_soc.h>
++#include <linux/cdev.h>
++
++static char module_name[] = "exio";
++
++
++#define NB_EXIO 8
++#define DEFAULT_STATE 0x58
++#define EXIO_BASE 0xfa000000
++#define EXIO_SIZE 0x2
++
++static int major = 0;
++static u8 exio_state = DEFAULT_STATE;
++static void *exio_io = NULL;
++static struct resource *exio_mem = NULL;
++
++static ssize_t mpc8313e_exio_write(struct file *file, const char __user *data, size_t len, loff_t *ppos)
++{
++ unsigned m = iminor(file->f_path.dentry->d_inode);
++ size_t i;
++ char mask;
++ int err = 0;
++
++ for (i = 0; i < len; ++i) {
++ char c;
++ if (get_user(c, data + i))
++ return -EFAULT;
++ //TODO write
++
++ mask=(1<<(7-m));
++ switch (c) {
++ case '0':
++ /*Clear exio level */
++ exio_state&=~mask;
++ iowrite8(exio_state, exio_io);
++ break;
++ case '1':
++ /*Set exio level */
++ exio_state|=mask;
++ iowrite8(exio_state, exio_io);
++ break;
++ default:
++ printk(KERN_DEBUG "exio%2d bad setting: chr<0x%2x>\n",
++ m, (int)c);
++ err++;
++ }
++ }
++ if (err)
++ return -EINVAL;
++
++ return len;
++}
++
++
++static ssize_t mpc8313e_exio_read(struct file *file, char __user * buf,
++ size_t len, loff_t * ppos)
++{
++ unsigned m = iminor(file->f_path.dentry->d_inode);
++ int value;
++ char mask;
++ char state=ioread8(exio_io);
++
++ mask=(1<<(7-m));
++ value=state&mask;
++ if (put_user(value ? '1' : '0', buf))
++ return -EFAULT;
++ return 1;
++
++}
++
++static int mpc8313e_exio_open(struct inode *inode, struct file *file)
++{
++ return 0;
++}
++
++static int mpc8313e_exio_close(struct inode *inode, struct file *file)
++{
++ printk(KERN_DEBUG "close()\n");
++ return 0;
++}
++
++struct file_operations mpc8313e_exio_fops =
++{
++ .owner = THIS_MODULE,
++ .read = mpc8313e_exio_read,
++ .write = mpc8313e_exio_write,
++ .open = mpc8313e_exio_open,
++ .release = mpc8313e_exio_close /* correspond a close */
++};
++
++static struct class * exio_class;
++
++static int __init mpc8313e_exio_init(void)
++{
++ int rc,i;
++
++ rc = register_chrdev(major, module_name, &mpc8313e_exio_fops);
++ if (rc < 0) {
++ return rc;
++ }
++
++ if (major == 0) {
++ major = rc; /* accept dynamic major number */
++ printk(KERN_INFO "%s: successfully loaded with major %d\n",module_name, major);
++ }
++
++ exio_class = class_create(THIS_MODULE, "exio");
++
++ for (i = 0; i < NB_EXIO; i++)
++ {
++ device_create(exio_class, NULL, MKDEV(major, i) , "%s%i", module_name,i);
++
++ }
++
++ /* System I/O Configuration Register Low */
++ if (!(exio_mem = request_mem_region(EXIO_BASE, EXIO_SIZE, "mpc8313-exio")))
++ return -ENOMEM;
++
++ if (!(exio_io = ioremap(EXIO_BASE, EXIO_SIZE)))
++ {
++ release_mem_region(EXIO_BASE, EXIO_SIZE);
++ exio_mem = NULL;
++ return -ENOMEM;
++ }
++ iowrite8(exio_state, exio_io);
++
++ return 0;
++}
++
++static void __exit mpc8313e_exio_cleanup(void)
++{
++ if (exio_mem) release_mem_region(EXIO_BASE, EXIO_SIZE);
++ exio_mem = NULL;
++
++ unregister_chrdev(major, module_name);
++}
++
++module_param(major, int, 0644);
++MODULE_PARM_DESC(major, "Static major number (none = dynamic)");
++MODULE_AUTHOR("Alexandre Coffignal <alexandre.coffignal@cenosys.com>");
++MODULE_DESCRIPTION("mpc8313e exio");
++MODULE_LICENSE("GPL");
++
++module_init(mpc8313e_exio_init);
++module_exit(mpc8313e_exio_cleanup);
++
++
+diff -Nru linux-2.6.26-010/drivers/char/mpc8313e_gpio.c linux-2.6.26-011/drivers/char/mpc8313e_gpio.c
+--- linux-2.6.26-010/drivers/char/mpc8313e_gpio.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.26-011/drivers/char/mpc8313e_gpio.c 2008-12-02 10:46:35.000000000 +0100
+@@ -0,0 +1,148 @@
++/*
++* mpc8313e gpio driver
++*
++*
++* Copyright (C) 2007, CenoSYS (www.cenosys.com).
++* Alexandre Coffignal
++* alexandre.coffignal@cenosys.com
++*
++* This software program is licensed subject to the GNU General Public License
++* (GPL).Version 2,June 1991, available at http://www.fsf.org/copyleft/gpl.html
++*
++* Allows a user space process to control the GPIO pins.
++*
++*/
++
++#include <linux/fs.h>
++#include <linux/module.h>
++#include <linux/errno.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <asm/uaccess.h>
++#include <asm/io.h>
++#include <linux/of_platform.h>
++#include <sysdev/fsl_soc.h>
++
++static char module_name[] = "gpio";
++#define NB_GPIO 8
++static int major = 0;
++struct gpio {
++ __be32 gpdir;
++ __be32 gpodr;
++ __be32 gpdat;
++ __be32 gpier;
++ __be32 gpimr;
++ __be32 gpicr;
++} __attribute__ ((packed));
++static struct gpio *gpio_regs;
++
++static ssize_t mpc8313e_gpio_write(struct file *file, const char __user *data, size_t len, loff_t *ppos)
++{
++ unsigned m = iminor(file->f_path.dentry->d_inode);
++ size_t i;
++ int err = 0;
++
++ for (i = 0; i < len; ++i) {
++ char c;
++ if (get_user(c, data + i))
++ return -EFAULT;
++ /* set GPIO as output */
++ setbits32(&gpio_regs->gpdir, 1 << (31 - m));
++ clrbits32(&gpio_regs->gpodr, 1 << (31 - m));
++ switch (c) {
++ case '0':
++ /*Set GPIO level */
++ clrbits32(&gpio_regs->gpdat, 1 << (31 - m));
++ break;
++ case '1':
++ /*Set GPIO level */
++ setbits32(&gpio_regs->gpdat, 1 << (31 - m));
++ break;
++ default:
++ printk(KERN_DEBUG "io%2d bad setting: chr<0x%2x>\n",
++ m, (int)c);
++ err++;
++ }
++ }
++ if (err)
++ return -EINVAL;
++
++ return len;
++}
++
++static ssize_t mpc8313e_gpio_read(struct file *file, char __user * buf, size_t len, loff_t * ppos)
++{
++ unsigned m = iminor(file->f_path.dentry->d_inode);
++ int value;
++ value=in_be32(&gpio_regs->gpdat)&(1 << (31 - m));
++ if (put_user(value ? '1' : '0', buf))
++ return -EFAULT;
++ return 1;
++
++
++}
++
++
++
++static int mpc8313e_gpio_open(struct inode *inode, struct file *file)
++{
++ return 0;
++}
++
++static int mpc8313e_gpio_close(struct inode *inode, struct file *file)
++{
++ return 0;
++}
++
++struct file_operations mpc8313e_gpio_fops =
++{
++ .owner = THIS_MODULE,
++ .read = mpc8313e_gpio_read,
++ .write = mpc8313e_gpio_write,
++ .open = mpc8313e_gpio_open,
++ .release = mpc8313e_gpio_close
++};
++static struct class * gpio_class;
++static int __init mpc8313e_gpio_init(void)
++{
++ int rc,i;
++
++ rc = register_chrdev(major, module_name, &mpc8313e_gpio_fops);
++ if (rc < 0) {
++ return rc;
++ }
++
++ if (major == 0) {
++ major = rc; /* accept dynamic major number */
++ printk(KERN_INFO "%s: successfully loaded with major %d\n",module_name, major);
++
++ }
++ gpio_class = class_create(THIS_MODULE, "gpio");
++
++ for (i = 0; i < NB_GPIO; i++)
++ {
++ device_create(gpio_class, NULL, MKDEV(major, i) , "%s%i", module_name,i);
++
++ }
++
++ /* System I/O Configuration Register Low */
++ gpio_regs = ioremap(get_immrbase() + 0xc00, 0x20);
++ if (!gpio_regs)
++ return -ENOMEM;
++ return 0;
++}
++
++static void __exit mpc8313e_gpio_cleanup(void)
++{
++ unregister_chrdev(major, module_name);
++}
++module_param(major, int, 0644);
++MODULE_PARM_DESC(major, "Static major number (none = dynamic)");
++MODULE_AUTHOR("Alexandre Coffignal <alexandre.coffignal@cenosys.com>");
++MODULE_DESCRIPTION("mpc8313e GPIO");
++MODULE_LICENSE("GPL");
++
++module_init(mpc8313e_gpio_init);
++module_exit(mpc8313e_gpio_cleanup);
++
++
diff --git a/recipes/linux/linux-2.6.26/boc01/012-081222-cy3218-btns.patch b/recipes/linux/linux-2.6.26/boc01/012-081222-cy3218-btns.patch
new file mode 100644
index 0000000000..b3cb9b461b
--- /dev/null
+++ b/recipes/linux/linux-2.6.26/boc01/012-081222-cy3218-btns.patch
@@ -0,0 +1,223 @@
+diff -urN linux-2.6.26.orig/drivers/input/misc/cy3218-btns.c linux-2.6.26/drivers/input/misc/cy3218-btns.c
+--- linux-2.6.26.orig/drivers/input/misc/cy3218-btns.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.26/drivers/input/misc/cy3218-btns.c 2008-12-22 12:54:47.000000000 +0100
+@@ -0,0 +1,195 @@
++/*
++ * CAPSENSE Interface driver
++ *
++ *
++ * Copyright (C) 2007, CenoSYS (www.cenosys.com).
++ *
++ * Guillaume Ligneul <guillaume.ligneul@gmail.com>
++ * Jeremy Lainé <jeremy.laine@bolloretelecom.eu>
++ *
++ * This software program is licensed subject to the GNU General Public License
++ * (GPL).Version 2,June 1991, available at http://www.fsf.org/copyleft/gpl.html
++ */
++
++#include <linux/init.h>
++#include <linux/input-polldev.h>
++#include <linux/ioport.h>
++#include <linux/module.h>
++#include <linux/i2c.h>
++
++static int capsense_attach_adapter(struct i2c_adapter *adapter);
++static int capsense_detach_client(struct i2c_client *client);
++
++#define CAPSENSE_NAME "Capsense"
++/* i2c configuration */
++#define CAPSENSE_I2C_ADDR 0x25
++// To debug (may be add in include/linux/i2c-id.h)
++#define I2C_DRIVERID_CAPSENSE 98
++#define BUTTONS_POLL_INTERVAL 30 /* msec */
++#define CAP_STATE_GP0 0x88
++#define CAP_STATE_GP1 0x89
++#define MASK0 0x10
++#define MASK1 0x4
++#define MASK2 0x8
++#define MASK3 0x1
++
++
++static int poll_interval = BUTTONS_POLL_INTERVAL;
++module_param_named(poll, poll_interval, uint, 0);
++MODULE_PARM_DESC(poll, "poll interval in msec (30=default)");
++
++static const unsigned short normal_i2c[] = {
++ CAPSENSE_I2C_ADDR , I2C_CLIENT_END
++};
++I2C_CLIENT_INSMOD;
++
++static struct i2c_driver capsense_driver = {
++ .driver = {
++ .name = CAPSENSE_NAME,
++ },
++ .id = I2C_DRIVERID_CAPSENSE,
++ .attach_adapter = &capsense_attach_adapter,
++ .detach_client = &capsense_detach_client,
++};
++
++struct cy3218 {
++ struct input_polled_dev *ipdev;
++ struct i2c_client client;
++ unsigned char key_state;
++};
++
++unsigned short keymap[] = {
++ // GP0
++ KEY_F1,
++ KEY_ENTER,
++ KEY_DOWN,
++ KEY_BACKSPACE,
++ // GP1
++ KEY_UP,
++};
++
++static void handle_buttons(struct input_polled_dev *dev)
++{
++ struct cy3218 *capsense = dev->private;
++ u8 port_value;
++ u8 new_state = 0;
++ u8 changed;
++ int i;
++
++ // read status
++ port_value = i2c_smbus_read_byte_data(&capsense->client, CAP_STATE_GP0);
++ if (port_value & MASK0) new_state |= 0x01;
++ if (port_value & MASK1) new_state |= 0x02;
++ if (port_value & MASK2) new_state |= 0x04;
++ if (port_value & MASK3) new_state |= 0x08;
++
++ port_value = i2c_smbus_read_byte_data(&capsense->client, CAP_STATE_GP1);
++ if (port_value & MASK0) new_state |= 0x10;
++
++ // update keyboard state
++ changed = capsense->key_state ^ new_state;
++ for (i = 0; i < ARRAY_SIZE(keymap); i++)
++ if (changed & (1 << i))
++ input_report_key(dev->input, keymap[i], (new_state & (1 << i)));
++ capsense->key_state = new_state;
++ input_sync(dev->input);
++}
++
++static int
++capsense_probe(struct i2c_adapter *adapter, int addr, int kind)
++{
++ struct cy3218 *capsense;
++ struct input_polled_dev *ipdev;
++ struct input_dev *input;
++ int rc = 0, err = -ENOMEM, i=0;
++
++ capsense = kzalloc(sizeof(*capsense), GFP_KERNEL);
++ if (!capsense)
++ goto failout;
++
++ if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
++ goto failout;
++ }
++
++ ipdev = input_allocate_polled_device();
++ if (!ipdev)
++ goto failout;
++
++ capsense->key_state = 0;
++ capsense->ipdev = ipdev;
++ capsense->client.adapter = adapter;
++ capsense->client.addr = addr;
++ capsense->client.driver = &capsense_driver;
++ strlcpy(capsense->client.name, CAPSENSE_NAME, I2C_NAME_SIZE);
++ i2c_set_clientdata(&capsense->client, capsense);
++
++ rc = i2c_attach_client(&capsense->client);
++ if (rc)
++ goto out_attach;
++
++ ipdev->poll = handle_buttons;
++ ipdev->private = capsense;
++ ipdev->poll_interval = poll_interval;
++
++ input = ipdev->input;
++ input->name = "Capsense buttons";
++ input->phys = "capsense/input0";
++ input->id.bustype = BUS_I2C;
++ input->dev.parent = &capsense->client.dev;
++
++ input->keycode = keymap;
++ input->keycodemax = ARRAY_SIZE(keymap);
++ input->keycodesize = sizeof(unsigned short);
++
++ input_set_capability(input, EV_MSC, MSC_SCAN);
++ set_bit(EV_KEY, ipdev->input->evbit);
++
++ for (i = 0; i < ARRAY_SIZE(keymap); i++)
++ set_bit(keymap[i], ipdev->input->keybit);
++
++ rc = input_register_polled_device(ipdev);
++ if(rc)
++ goto out_polled;
++
++ return 0;
++
++out_polled:
++ i2c_detach_client(&capsense->client);
++out_attach:
++ input_free_polled_device(ipdev);
++failout:
++ return err;
++}
++
++static int
++capsense_attach_adapter (struct i2c_adapter *adapter)
++{
++ return i2c_probe(adapter, &addr_data, capsense_probe);
++}
++
++static int
++capsense_detach_client(struct i2c_client *client)
++{
++ struct cy3218 *capsense = i2c_get_clientdata(client);
++
++ input_unregister_polled_device(capsense->ipdev);
++ i2c_detach_client(&capsense->client);
++ input_free_polled_device(capsense->ipdev);
++ return 0;
++}
++
++static int __init capsense_buttons_init(void)
++{
++ return i2c_add_driver(&capsense_driver);
++}
++
++static void __exit capsense_buttons_exit(void)
++{
++ i2c_del_driver(&capsense_driver);
++}
++
++MODULE_AUTHOR("Guillaume Ligneul <guillaume.ligneul@cenosys.com>");
++MODULE_DESCRIPTION("Capsense CY3218 Input driver");
++MODULE_LICENSE("GPL");
++module_init(capsense_buttons_init);
++module_exit(capsense_buttons_exit);
+diff -urN linux-2.6.26.orig/drivers/input/misc/Kconfig linux-2.6.26/drivers/input/misc/Kconfig
+--- linux-2.6.26.orig/drivers/input/misc/Kconfig 2008-07-13 23:51:29.000000000 +0200
++++ linux-2.6.26/drivers/input/misc/Kconfig 2008-12-22 07:47:08.000000000 +0100
+@@ -197,4 +197,12 @@
+ Say Y here if you want to support the built-in real time clock
+ of the HP SDC controller.
+
++config INPUT_CAPSENSE_BTNS
++ tristate "CAPSENSE CY3218 button interface"
++ select INPUT_POLLDEV
++ help
++ To compile this driver as a module, choose M here: the
++ module will be called cy3218-btns.
++ To change poll interval, invoque poll parameter in msecs.
++
+ endif
+diff -urN linux-2.6.26.orig/drivers/input/misc/Makefile linux-2.6.26/drivers/input/misc/Makefile
+--- linux-2.6.26.orig/drivers/input/misc/Makefile 2008-07-13 23:51:29.000000000 +0200
++++ linux-2.6.26/drivers/input/misc/Makefile 2008-12-22 07:47:19.000000000 +0100
+@@ -19,3 +19,4 @@
+ obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
+ obj-$(CONFIG_INPUT_UINPUT) += uinput.o
+ obj-$(CONFIG_INPUT_APANEL) += apanel.o
++obj-$(CONFIG_INPUT_CAPSENSE_BTNS) +=cy3218-btns.o
diff --git a/recipes/linux/linux-2.6.26/boc01/013-081212-lcd.patch b/recipes/linux/linux-2.6.26/boc01/013-081212-lcd.patch
new file mode 100644
index 0000000000..340a157f3a
--- /dev/null
+++ b/recipes/linux/linux-2.6.26/boc01/013-081212-lcd.patch
@@ -0,0 +1,751 @@
+Index: linux-2.6.26/drivers/video/Kconfig
+===================================================================
+--- linux-2.6.26.orig/drivers/video/Kconfig 2008-07-13 23:51:29.000000000 +0200
++++ linux-2.6.26/drivers/video/Kconfig 2008-12-09 10:01:14.000000000 +0100
+@@ -480,6 +480,17 @@
+ this driver, say Y or M; otherwise say N. You must specify the
+ GPIO IO address to be used for setting control and data.
+
++config FB_NOVA
++ tristate "Nova 7506 Monochrome LCD board support"
++ depends on FB
++ select FB_SYS_FILLRECT
++ select FB_SYS_COPYAREA
++ select FB_SYS_IMAGEBLIT
++ select FB_SYS_FOPS
++ help
++ This enables support for the Nova 7506 Monochrome LCD board. The board
++ is based on the NT7506 lcd controller.
++
+ config FB_ATARI
+ bool "Atari native chipset support"
+ depends on (FB = y) && ATARI
+Index: linux-2.6.26/drivers/video/Makefile
+===================================================================
+--- linux-2.6.26.orig/drivers/video/Makefile 2008-07-13 23:51:29.000000000 +0200
++++ linux-2.6.26/drivers/video/Makefile 2008-12-09 10:01:14.000000000 +0100
+@@ -13,8 +13,8 @@
+
+ obj-$(CONFIG_VT) += console/
+ obj-$(CONFIG_LOGO) += logo/
+-obj-y += backlight/ display/
+-
++obj-y += backlight/ display/
++obj-$(CONFIG_FB_NOVA) += N7506fb.o
+ obj-$(CONFIG_FB_CFB_FILLRECT) += cfbfillrect.o
+ obj-$(CONFIG_FB_CFB_COPYAREA) += cfbcopyarea.o
+ obj-$(CONFIG_FB_CFB_IMAGEBLIT) += cfbimgblt.o
+Index: linux-2.6.26/drivers/video/N7506fb.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.26/drivers/video/N7506fb.c 2008-12-09 10:03:34.000000000 +0100
+@@ -0,0 +1,631 @@
++/*
++ * linux/drivers/video/N7506fb.c -- FB driver for Nova NT7506 monochrome LCD board
++ *
++ * Copyright (C) 2008, Alexandre Coffignal <alexandre.coffignal@cenosys.com>
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file COPYING in the main directory of this archive for
++ * more details.
++ *
++ * Layout is based on arcfb.c by Jaya Kumar
++ *
++ * This driver was written to be used with the Nova 7506 LCD board.
++ *
++ *
++ *
++ *
++ * Nova uses a
++ * set of NT7506 chips that control individual 128x128 LCD matrices.
++ * The interface between the board and the host is TTL based GPIO.
++ *
++ * General notes:
++ * - User must set tuhold. It's in microseconds. According to the 108 spec,
++ * the hold time is supposed to be at least 1 microsecond.
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/errno.h>
++#include <linux/string.h>
++#include <linux/mm.h>
++#include <linux/slab.h>
++#include <linux/vmalloc.h>
++#include <linux/delay.h>
++#include <linux/interrupt.h>
++#include <linux/fb.h>
++#include <linux/init.h>
++#include <linux/NT7506.h>
++#include <linux/platform_device.h>
++
++#include <linux/uaccess.h>
++
++#define floor8(a) (a&(~0x07))
++#define floorXres(a,xres) (a&(~(xres - 1)))
++#define iceil8(a) (((int)((a+7)/8))*8)
++#define ceil128(a) (a|0x7F)
++#define ceilXres(a,xres) (a|(xres - 1))
++
++//NT7506 Hardware
++#define LCD_RST 0x08
++#define LCD_RSTN 0x00
++#define LCD_BCKLIGH 0x04
++#define LCD_BCKLIGHN 0x00
++#define LCD_RS 0x02
++#define LCD_RSN 0x00
++#define LCD_ERD 0x01
++#define LCD_ERDN 0x00
++
++//Base address
++#define LCD_BASE 0xf0000000
++#define LCD_SIZE 0x2
++
++#define CONTRASTE 0xF
++#define FRAME_PER_SECOND 5
++
++static struct resource *lcd_mem = NULL;
++static void * _lcd_io = NULL;
++static unsigned long tuhold;
++struct fb_info *info;
++static struct timer_list fb_timer;
++static char _refresh;
++static char _fps =FRAME_PER_SECOND;
++static char _backlight=1;
++
++struct novafb_par {
++ atomic_t ref_count;
++ unsigned char cslut[9];
++ struct fb_info *info;
++ unsigned int irq;
++ spinlock_t lock;
++};
++
++static struct fb_fix_screeninfo novafb_fix __initdata = {
++ .id = "novafb",
++ .type = FB_TYPE_PACKED_PIXELS,
++ .visual = FB_VISUAL_MONO01,
++ .xpanstep = 1,
++ .ypanstep = 1,
++ .ywrapstep = 0,
++ .line_length=16,
++ .accel = FB_ACCEL_NONE,
++};
++
++static struct fb_var_screeninfo novafb_var __initdata = {
++ .xres = 128,
++ .yres = 128,
++ .xres_virtual = 128,
++ .yres_virtual = 128,
++ .bits_per_pixel = 1,
++ .nonstd = 1,
++};
++
++
++static void NT7506_init_lcd(char ael);
++
++static void NT7506_writeb_ctl(unsigned char value,char backlight)
++{
++ unsigned short svalue;
++ char bl;
++ if(backlight)
++ bl=LCD_BCKLIGH;
++ else
++ bl=LCD_BCKLIGHN;
++
++ svalue=value<<8 | LCD_RSN | LCD_RST | LCD_ERDN | bl;
++ iowrite16(svalue, _lcd_io);
++ udelay(tuhold);
++ //The data on DB0/7 are latched at the falling edge of the E_RD signal
++ svalue=value<<8 | LCD_RSN | LCD_RST | LCD_ERD | bl;
++ iowrite16(svalue, _lcd_io);
++ udelay(tuhold);
++}
++
++static void NT7506_writeb_data(unsigned char value,char backlight)
++{
++ unsigned short svalue;
++ char bl;
++ if(backlight)
++ bl=LCD_BCKLIGH;
++ else
++ bl=LCD_BCKLIGHN;
++ svalue=value<<8|LCD_RS |LCD_RST | LCD_ERD | bl ;
++ iowrite16(svalue, _lcd_io);
++ udelay(tuhold);
++ //The data on DB0/7 are latched at the falling edge of the E_RD signal
++ svalue=value<<8|LCD_RS |LCD_RST | LCD_ERDN | bl;
++ iowrite16(svalue, _lcd_io);
++ udelay(tuhold);
++}
++
++static void NT7506_set_start_line(unsigned char y)
++{
++ NT7506_writeb_ctl(NT_START_LINE,_backlight);
++ NT7506_writeb_ctl(y,_backlight);
++}
++
++static void NT7506_set_yaddr(unsigned char y)
++{
++ NT7506_writeb_ctl(NT_PAGE_ADDR+y,_backlight);
++}
++
++static void NT7506_set_xaddr(unsigned char x)
++{
++ NT7506_writeb_ctl(NT_COL_MSB | (x >> 0x04),_backlight); //Send high nibble
++ NT7506_writeb_ctl(NT_COL_LSB | (x & 0x0F) ,_backlight); //Send low nibble
++}
++
++/* main novafb functions */
++
++static int novafb_open(struct fb_info *info, int user)
++{
++ struct novafb_par *par = info->par;
++ atomic_inc(&par->ref_count);
++ return 0;
++}
++
++static int novafb_release(struct fb_info *info, int user)
++{
++ struct novafb_par *par = info->par;
++ int count = atomic_read(&par->ref_count);
++ if (!count)
++ return -EINVAL;
++ atomic_dec(&par->ref_count);
++ return 0;
++}
++
++static int novafb_pan_display(struct fb_var_screeninfo *var,
++ struct fb_info *info)
++{
++ if ((var->vmode & FB_VMODE_YWRAP) && (var->yoffset < 128)
++ && (info->var.yres <= 128))
++ {
++ NT7506_set_start_line(var->yoffset);
++ info->var.yoffset = var->yoffset;
++ return 0;
++ }
++
++ return -EINVAL;
++}
++
++static void novafb_lcd_update(struct novafb_par *par, unsigned int dx,
++ unsigned int dy, unsigned int w, unsigned int h)
++{
++ int bit,x,y,xfb,yfb,width,height,i;
++ char mask=0;
++ char dest[2048];
++ char * src;
++ char value;
++ src = (unsigned char __force *) par->info->screen_base;
++ for(i=0;i<2048;i++)
++ {
++ dest[i]=0;
++ }
++ for(x=0;x<128/*(width)*/;x++)
++ {
++ for(y=0;y<16/*height/8*/;y++)
++ {
++ xfb=x/8;
++ yfb=y*8;
++
++ for(bit=0;bit<8;yfb++,bit++)
++ {
++ mask = (1<<(7-(x%8)));
++ if(((src[yfb*16+xfb]&mask)))
++ value=1;
++ else
++ value=0;
++
++ dest[y*128+x]+= (value<<bit);
++ }
++ }
++ }
++
++ height=16;
++ width=128;
++
++ for (y = 0; y < height; y++)
++ {
++ NT7506_set_yaddr(y);
++ NT7506_set_xaddr(0);
++ for (x = 0; x < width; x++)
++ {
++ NT7506_writeb_data(dest[y*128+x],_backlight);
++ NT7506_writeb_data(0x00,_backlight);
++ }
++ NT7506_writeb_data((unsigned char)0,_backlight);
++ }
++}
++
++static void novafb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
++{
++
++// sys_fillrect(info, rect);
++
++}
++
++
++
++static void novafb_copyarea(struct fb_info *info,
++ const struct fb_copyarea *area)
++{
++// sys_copyarea(info, area);
++}
++
++
++static void novafb_imageblit(struct fb_info *info, const struct fb_image *image)
++{
++ struct novafb_par *par = info->par;
++
++ int xfb,yfb,i=0;
++ char * src = (unsigned char __force *) par->info->screen_base;
++
++ for(yfb=image->dy;yfb<(image->height+image->dy);yfb++)
++ {
++ for(xfb=(image->dx)/8;xfb<(image->dx+image->width)/8;xfb++)
++ {
++ src[yfb*16+xfb]=image->data[i++];
++ }
++ }
++
++}
++
++/*
++ * this is the access path from userspace. they can seek and write to
++ * the fb. it's inefficient for them to do anything less than 128*8
++ * writes since we update the lcd in each write() anyway.
++ */
++static ssize_t novafb_write(struct fb_info *info, const char __user *buf,
++ size_t count, loff_t *ppos)
++{
++ unsigned long p;
++ int err=-EINVAL;
++ unsigned int fbmemlength ;
++ struct novafb_par *par;
++ unsigned int xres;
++ p = *ppos;
++ par = info->par;
++ xres = info->var.xres;
++ fbmemlength = (xres * info->var.yres)/8;
++
++ if (p > fbmemlength)
++ {
++ return -ENOSPC;
++ }
++ err = 0;
++ if ((count + p) > fbmemlength) {
++ count = fbmemlength - p;
++ err = -ENOSPC;
++ }
++
++ if (count) {
++ char *base_addr;
++ base_addr = (char __force *)info->screen_base;
++ count -= copy_from_user(base_addr + p, buf, count);
++ *ppos += count;
++ err = -EFAULT;
++ }
++ if (count)
++ {
++ return count;
++ }
++ return err;
++}
++
++static int novafb_mmap(struct fb_info *info, struct vm_area_struct *vma)
++{
++ unsigned long off;
++ unsigned long start;
++ u32 len;
++
++ if (vma->vm_end - vma->vm_start == 0)
++ return 0;
++ if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
++ return -EINVAL;
++ off = vma->vm_pgoff << PAGE_SHIFT;
++ start = info->fix.smem_start;
++ len = info->fix.smem_len;
++ if (off >= len)
++ {
++ return -EINVAL;
++
++ }
++ if ((vma->vm_end - vma->vm_start + off) > len)
++ {
++ return -EINVAL;
++ }
++ off += start;
++ vma->vm_pgoff = off >> PAGE_SHIFT;
++ if (remap_pfn_range(vma, vma->vm_start, virt_to_phys((void *)info->fix.smem_start) >> PAGE_SHIFT,
++ info->fix.smem_len, vma->vm_page_prot))
++
++ {
++ return -EAGAIN;
++ }
++ return 0;
++
++}
++static int novafb_ioctl(struct fb_info *info,
++ unsigned int cmd, unsigned long arg)
++{
++ unsigned char contrast;
++ unsigned char frame_rate;
++ unsigned char backlight;
++ switch (cmd)
++ {
++ case FBIO_FRAMERATE:
++ {
++
++ if (get_user(frame_rate, (unsigned char *)arg))
++ return -EFAULT;
++ printk(KERN_INFO "fb0: framerate=%d Hz\n",frame_rate);
++ _fps=frame_rate;
++ return 0;
++ }
++ case FBIO_CONTRAST:
++ {
++ _refresh=0;
++ if (get_user(contrast, (unsigned char *)arg))
++ return -EFAULT;
++ printk(KERN_INFO "fb0: contrast=%d\n",contrast);
++ NT7506_writeb_ctl(NT_ELEC_VOL,_backlight); NT7506_writeb_ctl(contrast,_backlight);
++ _refresh=1;
++ return 0;
++ }
++ case FBIO_BACKLIGHT:
++ {
++ _refresh=0;
++ if (get_user(backlight, (unsigned char *)arg))
++ return -EFAULT;
++ if(backlight)
++ {
++ printk(KERN_INFO "fb0: Backlight ON\n");
++ _backlight=1;
++ }
++ else
++ {
++ printk(KERN_INFO "fb0: Backlight OFF\n");
++ _backlight=0;
++ }
++ _refresh=1;
++ return 0;
++
++ }
++
++
++ default:
++ return -EINVAL;
++ }
++
++}
++
++static struct fb_ops novafb_ops = {
++ .owner = THIS_MODULE,
++ .fb_open = novafb_open,
++ .fb_read = fb_sys_read,
++ .fb_write = novafb_write,
++ .fb_release = novafb_release,
++ .fb_pan_display = novafb_pan_display,
++ .fb_fillrect = novafb_fillrect,
++ .fb_copyarea = novafb_copyarea,
++ .fb_imageblit = novafb_imageblit,
++ .fb_ioctl = novafb_ioctl,
++ .fb_mmap =novafb_mmap,
++};
++
++
++static void
++novafb_refresh(int ignore_me )
++{
++ struct novafb_par *par = info->par;
++ if(_refresh)
++ {
++ novafb_lcd_update(par, 0, 0, 128,128);
++ fb_timer.expires = jiffies + (HZ/_fps);
++ add_timer(&fb_timer);
++ }
++ else
++ {
++ fb_timer.expires = jiffies + (HZ/_fps);
++ add_timer(&fb_timer);
++ }
++}
++
++static int
++__init novafb_probe(struct platform_device *dev)
++{
++
++ int retval = -ENOMEM;
++ char * src;
++ int i;
++
++ struct novafb_par *par;
++ static unsigned char *videomemory;
++ static int videomemorysize;
++
++ NT7506_init_lcd(CONTRASTE);
++
++ videomemorysize = (128*128/8)*2;
++
++ if (!(videomemory = kmalloc(videomemorysize,GFP_ATOMIC)))
++ return retval;
++ memset(videomemory, 0, videomemorysize);
++
++ info = framebuffer_alloc(sizeof(struct novafb_par), &dev->dev);
++
++ if (!info)
++ goto err;
++ info->screen_base = (char __iomem *)videomemory;
++ info->fbops = &novafb_ops;
++
++ info->var = novafb_var;
++ info->fix = novafb_fix;
++ info->fix.smem_start=(unsigned long)videomemory;
++ info->fix.smem_len = videomemorysize;
++
++ par = info->par;
++ par->info = info;
++ par->cslut[0] = 0x00;
++ par->cslut[1] = 0x06;
++ src = (unsigned char __force *) par->info->screen_base;
++ for(i=0;i<videomemorysize;i++)
++ {
++ src[i]=0;
++ }
++ info->flags = FBINFO_FLAG_DEFAULT;
++ spin_lock_init(&par->lock);
++ platform_set_drvdata(dev, info);
++ retval = register_framebuffer(info);
++ if (retval < 0)
++ goto err1;
++
++ init_timer(&fb_timer);
++ fb_timer.function = novafb_refresh;
++ fb_timer.expires = jiffies + (HZ / _fps);
++ add_timer(&fb_timer);
++
++ printk(KERN_INFO
++ "fb%d: nova frame buffer device, using %dK of video memory\n",
++ info->node, videomemorysize >> 10);
++ return 0;
++err1:
++ framebuffer_release(info);
++err:
++ vfree(videomemory);
++ return retval;
++}
++
++static int novafb_remove(struct platform_device *dev)
++{
++ struct fb_info *info = platform_get_drvdata(dev);
++
++ if (info) {
++ unregister_framebuffer(info);
++ vfree((void __force *)info->screen_base);
++ framebuffer_release(info);
++ }
++ return 0;
++}
++
++static struct platform_driver novafb_driver = {
++ .probe = novafb_probe,
++ .remove = novafb_remove,
++ .driver = {
++ .name = "novafb",
++ },
++};
++
++static struct platform_device *novafb_device;
++
++static int __init novafb_init(void)
++{
++ int ret;
++
++
++ if (!(lcd_mem = request_mem_region(LCD_BASE, LCD_SIZE, "mpc8313-lcd")))
++ return -ENOMEM;
++
++ if (!(_lcd_io = ioremap(LCD_BASE, LCD_SIZE)))
++ {
++ release_mem_region(LCD_BASE, LCD_SIZE);
++ lcd_mem = NULL;
++ return -ENOMEM;
++ }
++ ret = platform_driver_register(&novafb_driver);
++
++ if (!ret) {
++ novafb_device = platform_device_alloc("novafb", 0);
++ if (novafb_device)
++ {
++ ret = platform_device_add(novafb_device);
++ }
++ else
++ {
++ ret = -ENOMEM;
++ }
++ if (ret)
++ {
++ platform_device_put(novafb_device);
++ platform_driver_unregister(&novafb_driver);
++ }
++
++ }
++
++
++ return ret;
++
++}
++
++
++static void NT7506_init_lcd(char ael)
++{
++ /* this resets the lcd*/
++ char bl;
++ if(_backlight)
++ bl=LCD_BCKLIGH;
++ else
++ bl=LCD_BCKLIGHN;
++
++ iowrite16(LCD_RSTN | LCD_ERD | bl, _lcd_io);
++ udelay(100);
++ iowrite16(LCD_RST| LCD_ERD | bl, _lcd_io);
++ udelay(200);
++ /* Soft reset*/
++ NT7506_writeb_ctl(NT_RESET,_backlight);
++ /* Disable ICON display*/
++ NT7506_writeb_ctl(NT_ICON|OFF,_backlight);
++ /* Sets the duty ratio 1/128*/
++ NT7506_writeb_ctl(NT_DUTY,_backlight); NT7506_writeb_ctl(DUTY_1_128,_backlight);
++ /* Sets reverse direction between RAM column address and segment driver*/
++ NT7506_writeb_ctl(NT_ADC_REV,_backlight);
++ NT7506_writeb_ctl(NT_SHL_NOR,_backlight);
++ /* Enales the built in Oscillator circuit.*/
++ NT7506_writeb_ctl(NT_OSC,_backlight);
++ /* Set Initial row to 0*/
++ NT7506_writeb_ctl(NT_COM0,_backlight); NT7506_writeb_ctl(0,_backlight);
++ /* Sets DC-DC*/
++ NT7506_writeb_ctl(NT_DCDC|TIME6,_backlight);
++ /* Selects resistance ratio of the internal resistor*/
++ NT7506_writeb_ctl(NT_REG_RES|RES_7_2,_backlight);
++ /* set Reference Voltage mode*/
++ NT7506_writeb_ctl(NT_ELEC_VOL,_backlight); NT7506_writeb_ctl(ael,_backlight);
++ /* Selects LCD bias ratio*/
++ NT7506_writeb_ctl(NT_BIAS|BIAS_1_11,_backlight);
++
++ NT7506_writeb_ctl(NT_DATA_DIR,_backlight); NT7506_writeb_ctl(0,_backlight);
++ NT7506_writeb_ctl(NT_FRC_PWM|PWM15,_backlight);
++ /* Select power circuit functions */
++ NT7506_writeb_ctl(NT_POWER|VC,_backlight);
++ udelay(5000);
++ NT7506_writeb_ctl(NT_POWER|VC|VR,_backlight);
++ udelay(5000);
++ NT7506_writeb_ctl(NT_POWER|VC|VR|VF,_backlight);
++ udelay(5000);
++ /* Reverses the display status on LCD panel */
++ NT7506_writeb_ctl(NT_REV_DISP|OFF,_backlight);
++ /* Forces the whole LCD points to be turned on regardless of the contents of the display data RAM*/
++ NT7506_writeb_ctl(NT_DISP|ON,_backlight);
++ /* Set Initial Start Line Address */
++ NT7506_writeb_ctl(NT_START_LINE,_backlight); NT7506_writeb_ctl(0x00,_backlight);
++ _refresh=1;
++}
++
++static void __exit novafb_exit(void)
++{
++ if (lcd_mem)
++ release_mem_region(LCD_BASE, LCD_SIZE);
++ lcd_mem = NULL;
++ platform_device_unregister(novafb_device);
++ platform_driver_unregister(&novafb_driver);
++}
++
++module_param(tuhold, ulong, 0);
++MODULE_PARM_DESC(tuhold, "Time to hold between strobing data to Nova board");
++
++module_init(novafb_init);
++module_exit(novafb_exit);
++
++MODULE_DESCRIPTION("fbdev driver for nova NT7506 monochrome LCD board");
++MODULE_AUTHOR("Alexandre Coffignal");
++MODULE_LICENSE("GPL");
++
+Index: linux-2.6.26/include/linux/NT7506.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.26/include/linux/NT7506.h 2008-12-09 10:04:16.000000000 +0100
+@@ -0,0 +1,73 @@
++
++/*
++ * (C) Copyright 2008
++ * Alexandre Coffignal, CénoSYS, alexandre.coffignal@cenosys.com
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ *
++ */
++
++#ifndef __LINUX_NOVAFB_H__
++#define __LINUX_NOVAFB_H__
++
++
++//NT7506 Instructions
++#define NT_ICON 0xA2
++#define NT_PAGE_ADDR 0xB0
++#define NT_COL_MSB 0x10
++#define NT_COL_LSB 0x00
++#define NT_DISP 0xAE
++#define NT_START_LINE 0x40
++#define NT_COM0 0x44
++#define NT_DUTY 0x48
++#define DUTY_1_128 0x80
++#define NT_REV_DISP 0xA6
++#define NT_POWER 0x28
++#define VC 0x04
++#define VR 0x02
++#define VF 0x01
++#define NT_DCDC 0x64
++#define TIME6 0x03
++#define NT_REG_RES 0x20
++#define RES_7_2 0x07
++#define NT_ELEC_VOL 0x81
++#define NT_BIAS 0x50
++#define BIAS_1_11 0x06
++#define NT_ADC_NOR 0xA0
++#define NT_ADC_REV 0xA1
++#define NT_SHL_NOR 0xC0
++#define NT_SHL_REV 0xC8
++#define NT_OSC 0xAB
++#define NT_RESET 0xE2
++#define NT_DATA_DIR 0xe8
++#define NT_FRC_PWM 0x90
++#define PWM15 0x03
++
++#define ON 0x01
++#define OFF 0x00
++
++
++
++#define FBIO_FRAMERATE _IOR('f', 1, char)
++#define FBIO_CONTRAST _IOR('f', 2, char)
++#define FBIO_BACKLIGHT _IOR('f', 3, char)
++
++
++#endif
++
diff --git a/recipes/linux/linux-2.6.26/boc01/boc01.dts b/recipes/linux/linux-2.6.26/boc01/boc01.dts
new file mode 100644
index 0000000000..dc66cb67bc
--- /dev/null
+++ b/recipes/linux/linux-2.6.26/boc01/boc01.dts
@@ -0,0 +1,247 @@
+/*
+ * Bolloré telecom CPE v01 Device Tree Source
+ *
+ * Copyright 2005, 2006, 2007 Freescale Semiconductor Inc.
+ * Copyright 2008 Bolloré telecom.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "MPC8313ERDB";
+ compatible = "MPC8313ERDB", "MPC831xRDB", "MPC83xxRDB";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ ethernet1 = &enet1;
+ serial0 = &serial0;
+ pci0 = &pci0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8313@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <16384>;
+ i-cache-size = <16384>;
+ timebase-frequency = <0>; // from bootloader
+ bus-frequency = <0>; // from bootloader
+ clock-frequency = <0>; // from bootloader
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x08000000>; // 128MB at 0
+ };
+
+ localbus@e0005000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8313-elbc", "fsl,elbc", "simple-bus";
+ reg = <0xe0005000 0x1000>;
+ interrupts = <77 0x8>;
+ interrupt-parent = <&ipic>;
+
+ // CS0 and CS1 are swapped when
+ // booting from nand, but the
+ // addresses are the same.
+ ranges = <0x0 0x0 0xfe000000 0x00800000
+ 0x1 0x0 0xe2800000 0x00008000
+ 0x2 0x0 0xf0000000 0x00020000
+ 0x3 0x0 0xfa000000 0x00008000>;
+
+ flash@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x800000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+
+ nand@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8313-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x1 0x0 0x2000>;
+
+ kernel@0 {
+ reg = <0x0 0x400000>;
+ read-only;
+ };
+
+ fs@400000 {
+ reg = <0x400000 0x4000000>;
+ };
+
+ appli@4400000 {
+ reg = <0x4400000 0x3c00000>;
+ };
+ };
+ };
+
+ soc8313@e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+ ranges = <0x0 0xe0000000 0x00100000>;
+ reg = <0xe0000000 0x00000200>;
+ bus-frequency = <0>;
+
+ wdt@200 {
+ device_type = "watchdog";
+ compatible = "mpc83xx_wdt";
+ reg = <0x200 0x100>;
+ };
+
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <14 0x8>;
+ interrupt-parent = <&ipic>;
+ dfsrr;
+ rtc@6f {
+ compatible = "isl12024";
+ reg = <0x6f>;
+ };
+ };
+
+ i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <15 0x8>;
+ interrupt-parent = <&ipic>;
+ dfsrr;
+ };
+
+ spi@7000 {
+ device_type = "spi";
+ cell-index = <0>;
+ compatible = "fsl,spi";
+ reg = <0x7000 0x1000>;
+ interrupts = <16 0x8>;
+ interrupt-parent = <&ipic>;
+ mode = "cpu";
+ };
+
+ /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
+ usb@23000 {
+ compatible = "fsl-usb2-dr";
+ reg = <0x23000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&ipic>;
+ interrupts = <38 0x8>;
+ phy_type = "utmi_wide";
+ };
+
+ mdio@24520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x24520 0x20>;
+ phy4: ethernet-phy@4 {
+ interrupt-parent = <&ipic>;
+ interrupts = <20 0x8>;
+ reg = <0x4>;
+ device_type = "ethernet-phy";
+ };
+
+ };
+
+ enet1: ethernet@25000 {
+ cell-index = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x25000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <34 0x8 33 0x8 32 0x8>;
+ interrupt-parent = <&ipic>;
+ phy-handle = < &phy4 >;
+ };
+
+ serial0: serial@4600 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <10 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
+ crypto@30000 {
+ device_type = "crypto";
+ model = "SEC2";
+ compatible = "talitos";
+ reg = <0x30000 0x7000>;
+ interrupts = <11 0x8>;
+ interrupt-parent = <&ipic>;
+ /* Rev. 2.2 */
+ num-channels = <1>;
+ channel-fifo-len = <24>;
+ exec-units-mask = <0x0000004c>;
+ descriptor-types-mask = <0x0122003f>;
+ };
+
+ /* IPIC
+ * interrupts cell = <intr #, sense>
+ * sense values match linux IORESOURCE_IRQ_* defines:
+ * sense == 8: Level, low assertion
+ * sense == 2: Edge, high-to-low change
+ */
+ ipic: pic@700 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x700 0x100>;
+ device_type = "ipic";
+ };
+ };
+
+ pci0: pci@e0008500 {
+ cell-index = <1>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+
+ /* IDSEL 0x0F - PCI slot */
+ 0x7800 0x0 0x0 0x1 &ipic 48 0x8
+ 0x7800 0x0 0x0 0x2 &ipic 48 0x8
+ 0x7800 0x0 0x0 0x3 &ipic 48 0x8
+ 0x7800 0x0 0x0 0x4 &ipic 48 0x8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <66 0x8>;
+ bus-range = <0x0 0x0>;
+ ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+ 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+ 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+ clock-frequency = <66666666>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xe0008500 0x100>;
+ compatible = "fsl,mpc8349-pci";
+ device_type = "pci";
+ };
+};
diff --git a/recipes/linux/linux-2.6.26/boc01/defconfig b/recipes/linux/linux-2.6.26/boc01/defconfig
new file mode 100644
index 0000000000..726e955a2d
--- /dev/null
+++ b/recipes/linux/linux-2.6.26/boc01/defconfig
@@ -0,0 +1,1917 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26
+# Wed Dec 17 12:15:19 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+# CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_MULTIPLATFORM is not set
+# CONFIG_PPC_82xx is not set
+CONFIG_PPC_83xx=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_MPC83xx=y
+CONFIG_MPC831x_RDB=y
+# CONFIG_MPC832x_MDS is not set
+# CONFIG_MPC832x_RDB is not set
+# CONFIG_MPC834x_MDS is not set
+# CONFIG_MPC834x_ITX is not set
+# CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC837x_MDS is not set
+# CONFIG_MPC837x_RDB is not set
+# CONFIG_SBC834x is not set
+CONFIG_PPC_MPC831x=y
+CONFIG_IPIC=y
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+CONFIG_PCCARD=m
+# CONFIG_PCMCIA_DEBUG is not set
+# CONFIG_PCMCIA is not set
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+CONFIG_PCCARD_NONSTATIC=m
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_NET_IPGRE_BROADCAST is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+
+#
+# Bridge: Netfilter Configuration
+#
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+# CONFIG_BRIDGE_EBT_ULOG is not set
+# CONFIG_BRIDGE_EBT_NFLOG is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+CONFIG_LLC2=m
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_INGRESS=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+CONFIG_CFG80211=y
+CONFIG_NL80211=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_MAC80211=m
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
+
+#
+# Selecting 'y' for an algorithm will
+#
+
+#
+# build the algorithm into mac80211.
+#
+CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
+# CONFIG_MAC80211_DEBUG is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0xfe000000
+CONFIG_MTD_PHYSMAP_LEN=0x0800000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_OF is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_NAND_FSL_ELBC=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+CONFIG_EEPROM_93CX6=m
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=m
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_IFB is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+CONFIG_FIXED_PHY=y
+# CONFIG_MDIO_BITBANG is not set
+# CONFIG_NET_ETHERNET is not set
+CONFIG_MII=y
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+CONFIG_GFAR_NAPI=y
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+CONFIG_WLAN_PRE80211=y
+# CONFIG_STRIP is not set
+CONFIG_WLAN_80211=y
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_AIRO is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8180 is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_ADM8211 is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_ATH5K is not set
+# CONFIG_IWLCORE is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_IWL4965 is not set
+# CONFIG_IWL3945 is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET=y
+# CONFIG_USB_NET_AX8817X is not set
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+# CONFIG_USB_NET_NET1080 is not set
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+CONFIG_USB_NET_CDC_SUBSET=y
+# CONFIG_USB_ALI_M5632 is not set
+# CONFIG_USB_AN2720 is not set
+CONFIG_USB_BELKIN=y
+# CONFIG_USB_ARMLINUX is not set
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+# CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_WAN is not set
+CONFIG_ATM_DRIVERS=y
+# CONFIG_ATM_DUMMY is not set
+# CONFIG_ATM_TCP is not set
+# CONFIG_ATM_LANAI is not set
+# CONFIG_ATM_ENI is not set
+# CONFIG_ATM_FIRESTREAM is not set
+# CONFIG_ATM_ZATM is not set
+# CONFIG_ATM_NICSTAR is not set
+# CONFIG_ATM_IDT77252 is not set
+# CONFIG_ATM_AMBASSADOR is not set
+# CONFIG_ATM_HORIZON is not set
+# CONFIG_ATM_IA is not set
+# CONFIG_ATM_FORE200E_MAYBE is not set
+# CONFIG_ATM_HE is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPPOATM=m
+CONFIG_PPPOL2TP=m
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_UINPUT is not set
+CONFIG_INPUT_CAPSENSE_BTNS=y
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+CONFIG_GPIO_MPC8313=y
+CONFIG_EXIO_MPC8313=y
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+CONFIG_ISL12024EEPROM=y
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+CONFIG_EEPROM_RW=y
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_MPC83xx=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+CONFIG_SENSORS_LM73=y
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_THERMAL=y
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_83xx_WDT=y
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_IMAGEBLIT=y
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+CONFIG_FB_NOVA=y
+# CONFIG_FB_OF is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_FSL_DIU is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# PCI devices
+#
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+
+#
+# ALSA PowerMac devices
+#
+
+#
+# ALSA PowerPC devices
+#
+
+#
+# SPI devices
+#
+
+#
+# USB devices
+#
+CONFIG_SND_USB_AUDIO=m
+# CONFIG_SND_USB_USX2Y is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
+# SoC Audio for the Texas Instruments OMAP
+#
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PCI=y
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_ATM is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_ISL12024=y
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+CONFIG_LDM_PARTITION=y
+# CONFIG_LDM_DEBUG is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-15"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/recipes/linux/linux-2.6.26/canyonlands/defconfig b/recipes/linux/linux-2.6.26/canyonlands/defconfig
new file mode 100644
index 0000000000..a3b763c45e
--- /dev/null
+++ b/recipes/linux/linux-2.6.26/canyonlands/defconfig
@@ -0,0 +1,721 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.25-rc1
+# Thu Feb 21 14:29:28 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_4xx=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+# CONFIG_LOGBUFFER is not set
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_PPC4xx_PCI_EXPRESS=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_BAMBOO is not set
+# CONFIG_EBONY is not set
+# CONFIG_SEQUOIA is not set
+# CONFIG_TAISHAN is not set
+# CONFIG_KATMAI is not set
+# CONFIG_RAINIER is not set
+# CONFIG_WARP is not set
+CONFIG_CANYONLANDS=y
+CONFIG_460EX=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_RCU_TRACE=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+CONFIG_SECCOMP=y
+CONFIG_WANT_DEVICE_TREE=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_BOOT_LOAD=0x01000000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=256
+CONFIG_IBM_NEW_EMAC_TXB=256
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+CONFIG_IBM_NEW_EMAC_ZMII=y
+CONFIG_IBM_NEW_EMAC_RGMII=y
+CONFIG_IBM_NEW_EMAC_TAH=y
+CONFIG_IBM_NEW_EMAC_EMAC4=y
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_DEBUGGER=y
+# CONFIG_KGDB is not set
+# CONFIG_XMON is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_PPC_CLOCK is not set
diff --git a/recipes/linux/linux-2.6.26/cdc-ether-hack.patch b/recipes/linux/linux-2.6.26/cdc-ether-hack.patch
new file mode 100644
index 0000000000..ca0ce72a0b
--- /dev/null
+++ b/recipes/linux/linux-2.6.26/cdc-ether-hack.patch
@@ -0,0 +1,11 @@
+--- a/drivers/usb/host/ehci-q.c.orig 2008-10-30 15:17:27.000000000 +0100
++++ b/drivers/usb/host/ehci-q.c 2008-10-30 15:23:41.000000000 +0100
+@@ -799,7 +799,7 @@
+ * to help them do so. So now people expect to use
+ * such nonconformant devices with Linux too; sigh.
+ */
+- info1 |= max_packet(maxp) << 16;
++ info1 |= 256 << 16;
+ info2 |= (EHCI_TUNE_MULT_HS << 30);
+ } else { /* PIPE_INTERRUPT */
+ info1 |= max_packet (maxp) << 16;
diff --git a/recipes/linux/linux-2.6.26/fsl-elbc-nand-backport.patch b/recipes/linux/linux-2.6.26/fsl-elbc-nand-backport.patch
new file mode 100644
index 0000000000..99f4628122
--- /dev/null
+++ b/recipes/linux/linux-2.6.26/fsl-elbc-nand-backport.patch
@@ -0,0 +1,138 @@
+--- linux-2.6.26/drivers/mtd/nand/fsl_elbc_nand.c 2008-07-13 23:51:29.000000000 +0200
++++ linux-2.6.27/drivers/mtd/nand/fsl_elbc_nand.c 2008-10-10 00:13:53.000000000 +0200
+@@ -89,7 +89,6 @@
+ .eccbytes = 3,
+ .eccpos = {6, 7, 8},
+ .oobfree = { {0, 5}, {9, 7} },
+- .oobavail = 12,
+ };
+
+ /* Small Page FLASH with FMR[ECCM] = 1 */
+@@ -97,7 +96,6 @@
+ .eccbytes = 3,
+ .eccpos = {8, 9, 10},
+ .oobfree = { {0, 5}, {6, 2}, {11, 5} },
+- .oobavail = 12,
+ };
+
+ /* Large Page FLASH with FMR[ECCM] = 0 */
+@@ -105,7 +103,6 @@
+ .eccbytes = 12,
+ .eccpos = {6, 7, 8, 22, 23, 24, 38, 39, 40, 54, 55, 56},
+ .oobfree = { {1, 5}, {9, 13}, {25, 13}, {41, 13}, {57, 7} },
+- .oobavail = 48,
+ };
+
+ /* Large Page FLASH with FMR[ECCM] = 1 */
+@@ -113,7 +110,48 @@
+ .eccbytes = 12,
+ .eccpos = {8, 9, 10, 24, 25, 26, 40, 41, 42, 56, 57, 58},
+ .oobfree = { {1, 7}, {11, 13}, {27, 13}, {43, 13}, {59, 5} },
+- .oobavail = 48,
++};
++
++/*
++ * fsl_elbc_oob_lp_eccm* specify that LP NAND's OOB free area starts at offset
++ * 1, so we have to adjust bad block pattern. This pattern should be used for
++ * x8 chips only. So far hardware does not support x16 chips anyway.
++ */
++static u8 scan_ff_pattern[] = { 0xff, };
++
++static struct nand_bbt_descr largepage_memorybased = {
++ .options = 0,
++ .offs = 0,
++ .len = 1,
++ .pattern = scan_ff_pattern,
++};
++
++/*
++ * ELBC may use HW ECC, so that OOB offsets, that NAND core uses for bbt,
++ * interfere with ECC positions, that's why we implement our own descriptors.
++ * OOB {11, 5}, works for both SP and LP chips, with ECCM = 1 and ECCM = 0.
++ */
++static u8 bbt_pattern[] = {'B', 'b', 't', '0' };
++static u8 mirror_pattern[] = {'1', 't', 'b', 'B' };
++
++static struct nand_bbt_descr bbt_main_descr = {
++ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
++ NAND_BBT_2BIT | NAND_BBT_VERSION,
++ .offs = 11,
++ .len = 4,
++ .veroffs = 15,
++ .maxblocks = 4,
++ .pattern = bbt_pattern,
++};
++
++static struct nand_bbt_descr bbt_mirror_descr = {
++ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
++ NAND_BBT_2BIT | NAND_BBT_VERSION,
++ .offs = 11,
++ .len = 4,
++ .veroffs = 15,
++ .maxblocks = 4,
++ .pattern = mirror_pattern,
+ };
+
+ /*=================================*/
+@@ -687,8 +725,7 @@
+ chip->ecc.layout = (priv->fmr & FMR_ECCM) ?
+ &fsl_elbc_oob_lp_eccm1 :
+ &fsl_elbc_oob_lp_eccm0;
+- mtd->ecclayout = chip->ecc.layout;
+- mtd->oobavail = chip->ecc.layout->oobavail;
++ chip->badblock_pattern = &largepage_memorybased;
+ }
+ } else {
+ dev_err(ctrl->dev,
+@@ -752,8 +789,12 @@
+ chip->cmdfunc = fsl_elbc_cmdfunc;
+ chip->waitfunc = fsl_elbc_wait;
+
++ chip->bbt_td = &bbt_main_descr;
++ chip->bbt_md = &bbt_mirror_descr;
++
+ /* set up nand options */
+- chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR;
++ chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR |
++ NAND_USE_FLASH_BBT;
+
+ chip->controller = &ctrl->controller;
+ chip->priv = priv;
+@@ -795,8 +836,8 @@
+ return 0;
+ }
+
+-static int fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
+- struct device_node *node)
++static int __devinit fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
++ struct device_node *node)
+ {
+ struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+ struct fsl_elbc_mtd *priv;
+@@ -846,7 +887,7 @@
+ goto err;
+ }
+
+- priv->mtd.name = kasprintf(GFP_KERNEL, "%x.flash", res.start);
++ priv->mtd.name = kasprintf(GFP_KERNEL, "%x.flash", (unsigned)res.start);
+ if (!priv->mtd.name) {
+ ret = -ENOMEM;
+ goto err;
+@@ -917,7 +958,7 @@
+ return 0;
+ }
+
+-static int __devexit fsl_elbc_ctrl_remove(struct of_device *ofdev)
++static int fsl_elbc_ctrl_remove(struct of_device *ofdev)
+ {
+ struct fsl_elbc_ctrl *ctrl = dev_get_drvdata(&ofdev->dev);
+ int i;
+@@ -1041,7 +1082,7 @@
+ },
+ .match_table = fsl_elbc_match,
+ .probe = fsl_elbc_ctrl_probe,
+- .remove = __devexit_p(fsl_elbc_ctrl_remove),
++ .remove = fsl_elbc_ctrl_remove,
+ };
+
+ static int __init fsl_elbc_init(void)
diff --git a/recipes/linux/linux-2.6.26/mpc8313e-rdb/defconfig b/recipes/linux/linux-2.6.26/mpc8313e-rdb/defconfig
new file mode 100644
index 0000000000..bdeac7d89d
--- /dev/null
+++ b/recipes/linux/linux-2.6.26/mpc8313e-rdb/defconfig
@@ -0,0 +1,2031 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26
+# Wed Aug 27 19:53:28 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+# CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_MULTIPLATFORM is not set
+# CONFIG_PPC_82xx is not set
+CONFIG_PPC_83xx=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_MPC83xx=y
+CONFIG_MPC831x_RDB=y
+# CONFIG_MPC832x_MDS is not set
+# CONFIG_MPC832x_RDB is not set
+# CONFIG_MPC834x_MDS is not set
+# CONFIG_MPC834x_ITX is not set
+# CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC837x_MDS is not set
+# CONFIG_MPC837x_RDB is not set
+# CONFIG_SBC834x is not set
+CONFIG_PPC_MPC831x=y
+CONFIG_IPIC=y
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+CONFIG_PCCARD=m
+# CONFIG_PCMCIA_DEBUG is not set
+# CONFIG_PCMCIA is not set
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+CONFIG_PCCARD_NONSTATIC=m
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_NET_IPGRE_BROADCAST is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+
+#
+# Bridge: Netfilter Configuration
+#
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+# CONFIG_BRIDGE_EBT_ULOG is not set
+# CONFIG_BRIDGE_EBT_NFLOG is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+CONFIG_LLC2=m
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_INGRESS=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+# CONFIG_BT_CMTP is not set
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+# CONFIG_BT_HCIUART_LL is not set
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIVHCI=m
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+CONFIG_CFG80211=y
+CONFIG_NL80211=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_MAC80211=m
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
+
+#
+# Selecting 'y' for an algorithm will
+#
+
+#
+# build the algorithm into mac80211.
+#
+CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
+# CONFIG_MAC80211_DEBUG is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_RFKILL=m
+CONFIG_RFKILL_INPUT=m
+CONFIG_RFKILL_LEDS=y
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0xfe000000
+CONFIG_MTD_PHYSMAP_LEN=0x0800000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_OF is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_NAND_FSL_ELBC=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+CONFIG_EEPROM_93CX6=m
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=m
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_IFB is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+CONFIG_FIXED_PHY=y
+# CONFIG_MDIO_BITBANG is not set
+# CONFIG_NET_ETHERNET is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+CONFIG_GFAR_NAPI=y
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+CONFIG_IPW2200_RADIOTAP=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
+# CONFIG_IPW2200_DEBUG is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+# CONFIG_LIBERTAS_SDIO is not set
+# CONFIG_LIBERTAS_DEBUG is not set
+CONFIG_AIRO=m
+CONFIG_HERMES=m
+CONFIG_PLX_HERMES=m
+CONFIG_TMD_HERMES=m
+CONFIG_NORTEL_HERMES=m
+CONFIG_PCI_HERMES=m
+CONFIG_ATMEL=m
+CONFIG_PCI_ATMEL=m
+CONFIG_PRISM54=m
+CONFIG_USB_ZD1201=m
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8180 is not set
+CONFIG_RTL8187=m
+# CONFIG_ADM8211 is not set
+# CONFIG_P54_COMMON is not set
+CONFIG_ATH5K=m
+# CONFIG_ATH5K_DEBUG is not set
+# CONFIG_IWLCORE is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_IWL4965 is not set
+# CONFIG_IWL3945 is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+# CONFIG_RT2X00 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET=m
+# CONFIG_USB_NET_AX8817X is not set
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+# CONFIG_USB_NET_NET1080 is not set
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+# CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_WAN is not set
+CONFIG_ATM_DRIVERS=y
+# CONFIG_ATM_DUMMY is not set
+# CONFIG_ATM_TCP is not set
+# CONFIG_ATM_LANAI is not set
+# CONFIG_ATM_ENI is not set
+# CONFIG_ATM_FIRESTREAM is not set
+# CONFIG_ATM_ZATM is not set
+# CONFIG_ATM_NICSTAR is not set
+# CONFIG_ATM_IDT77252 is not set
+# CONFIG_ATM_AMBASSADOR is not set
+# CONFIG_ATM_HORIZON is not set
+# CONFIG_ATM_IA is not set
+# CONFIG_ATM_FORE200E_MAYBE is not set
+# CONFIG_ATM_HE is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPPOATM=m
+CONFIG_PPPOL2TP=m
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+CONFIG_ISDN=m
+CONFIG_ISDN_I4L=m
+# CONFIG_ISDN_PPP is not set
+# CONFIG_ISDN_AUDIO is not set
+
+#
+# ISDN feature submodules
+#
+CONFIG_ISDN_DRV_LOOP=m
+CONFIG_ISDN_DIVERSION=m
+
+#
+# ISDN4Linux hardware drivers
+#
+
+#
+# Passive cards
+#
+CONFIG_ISDN_DRV_HISAX=m
+
+#
+# D-channel protocol features
+#
+CONFIG_HISAX_EURO=y
+CONFIG_DE_AOC=y
+# CONFIG_HISAX_NO_SENDCOMPLETE is not set
+# CONFIG_HISAX_NO_LLC is not set
+# CONFIG_HISAX_NO_KEYPAD is not set
+CONFIG_HISAX_1TR6=y
+CONFIG_HISAX_NI1=y
+CONFIG_HISAX_MAX_CARDS=8
+
+#
+# HiSax supported cards
+#
+CONFIG_HISAX_16_3=y
+CONFIG_HISAX_S0BOX=y
+CONFIG_HISAX_FRITZPCI=y
+CONFIG_HISAX_AVM_A1_PCMCIA=y
+CONFIG_HISAX_ELSA=y
+CONFIG_HISAX_DIEHLDIVA=y
+CONFIG_HISAX_SEDLBAUER=y
+CONFIG_HISAX_NICCY=y
+CONFIG_HISAX_BKM_A4T=y
+CONFIG_HISAX_SCT_QUADRO=y
+CONFIG_HISAX_GAZEL=y
+CONFIG_HISAX_W6692=y
+CONFIG_HISAX_HFC_SX=y
+# CONFIG_HISAX_DEBUG is not set
+
+#
+# HiSax PCMCIA card service modules
+#
+
+#
+# HiSax sub driver modules
+#
+CONFIG_HISAX_ST5481=m
+CONFIG_HISAX_HFCUSB=m
+CONFIG_HISAX_HFC4S8S=m
+CONFIG_HISAX_FRITZ_PCIPNP=m
+CONFIG_HISAX_HDLC=y
+
+#
+# Active cards
+#
+CONFIG_HYSDN=m
+CONFIG_HYSDN_CAPI=y
+CONFIG_ISDN_DRV_GIGASET=m
+CONFIG_GIGASET_BASE=m
+CONFIG_GIGASET_M105=m
+CONFIG_GIGASET_M101=m
+# CONFIG_GIGASET_DEBUG is not set
+CONFIG_GIGASET_UNDOCREQ=y
+CONFIG_ISDN_CAPI=m
+CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
+CONFIG_CAPI_TRACE=y
+# CONFIG_ISDN_CAPI_MIDDLEWARE is not set
+CONFIG_ISDN_CAPI_CAPI20=m
+# CONFIG_ISDN_CAPI_CAPIDRV is not set
+
+#
+# CAPI hardware drivers
+#
+CONFIG_CAPI_AVM=y
+CONFIG_ISDN_DRV_AVMB1_B1PCI=m
+# CONFIG_ISDN_DRV_AVMB1_B1PCIV4 is not set
+CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
+CONFIG_ISDN_DRV_AVMB1_T1PCI=m
+CONFIG_ISDN_DRV_AVMB1_C4=m
+CONFIG_CAPI_EICON=y
+CONFIG_ISDN_DIVAS=m
+CONFIG_ISDN_DIVAS_BRIPCI=y
+CONFIG_ISDN_DIVAS_PRIPCI=y
+CONFIG_ISDN_DIVAS_DIVACAPI=m
+CONFIG_ISDN_DIVAS_USERIDI=m
+CONFIG_ISDN_DIVAS_MAINT=m
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_MPC83xx=y
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_AT25=m
+CONFIG_SPI_SPIDEV=m
+CONFIG_SPI_TLE62X0=m
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=m
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+CONFIG_SENSORS_LM75=m
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_83xx_WDT=y
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# PCI devices
+#
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+
+#
+# ALSA PowerMac devices
+#
+
+#
+# ALSA PowerPC devices
+#
+
+#
+# SPI devices
+#
+
+#
+# USB devices
+#
+CONFIG_SND_USB_AUDIO=m
+# CONFIG_SND_USB_USX2Y is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
+# SoC Audio for the Texas Instruments OMAP
+#
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PCI=y
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_ATM is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+CONFIG_USB_GADGET_NET2280=y
+CONFIG_USB_NET2280=y
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_WBSD is not set
+# CONFIG_MMC_TIFM_SD is not set
+CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_MPC8313E_RDB=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_NFSD=m
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+CONFIG_LDM_PARTITION=y
+# CONFIG_LDM_DEBUG is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=m
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/recipes/linux/linux-2.6.26/mpc8313e-rdb/mpc8313e-rdb-cardbus.patch b/recipes/linux/linux-2.6.26/mpc8313e-rdb/mpc8313e-rdb-cardbus.patch
new file mode 100644
index 0000000000..713f089ebf
--- /dev/null
+++ b/recipes/linux/linux-2.6.26/mpc8313e-rdb/mpc8313e-rdb-cardbus.patch
@@ -0,0 +1,12 @@
+diff -urN linux-2.6.24.orig/drivers/pcmcia/yenta_socket.c linux-2.6.24/drivers/pcmcia/yenta_socket.c
+--- linux-2.6.24.orig/drivers/pcmcia/yenta_socket.c 2008-01-24 23:58:37.000000000 +0100
++++ linux-2.6.24/drivers/pcmcia/yenta_socket.c 2008-04-16 18:03:38.000000000 +0200
+@@ -551,7 +551,7 @@
+ * max 4 MB, min 16 kB. We try very hard to not get below
+ * the "ACC" values, though.
+ */
+-#define BRIDGE_MEM_MAX 4*1024*1024
++#define BRIDGE_MEM_MAX 64*1024*1024
+ #define BRIDGE_MEM_ACC 128*1024
+ #define BRIDGE_MEM_MIN 16*1024
+
diff --git a/recipes/linux/linux-2.6.26/mpc8313e-rdb/mpc8313e-rdb-eth-fixed.patch b/recipes/linux/linux-2.6.26/mpc8313e-rdb/mpc8313e-rdb-eth-fixed.patch
new file mode 100644
index 0000000000..eab918994e
--- /dev/null
+++ b/recipes/linux/linux-2.6.26/mpc8313e-rdb/mpc8313e-rdb-eth-fixed.patch
@@ -0,0 +1,25 @@
+diff -urN linux-2.6.26.orig/arch/powerpc/boot/dts/mpc8313erdb.dts linux-2.6.26/arch/powerpc/boot/dts/mpc8313erdb.dts
+--- linux-2.6.26.orig/arch/powerpc/boot/dts/mpc8313erdb.dts 2008-07-13 23:51:29.000000000 +0200
++++ linux-2.6.26/arch/powerpc/boot/dts/mpc8313erdb.dts 2008-09-10 07:57:42.000000000 +0200
+@@ -160,12 +160,6 @@
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x24520 0x20>;
+- phy1: ethernet-phy@1 {
+- interrupt-parent = <&ipic>;
+- interrupts = <19 0x8>;
+- reg = <0x1>;
+- device_type = "ethernet-phy";
+- };
+ phy4: ethernet-phy@4 {
+ interrupt-parent = <&ipic>;
+ interrupts = <20 0x8>;
+@@ -183,7 +177,7 @@
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <37 0x8 36 0x8 35 0x8>;
+ interrupt-parent = <&ipic>;
+- phy-handle = < &phy1 >;
++ fixed-link = <1 1 1000 0 0>;
+ };
+
+ enet1: ethernet@25000 {
diff --git a/recipes/linux/linux-2.6.26/mpc8313e-rdb/mpc8313e-rdb-leds.patch b/recipes/linux/linux-2.6.26/mpc8313e-rdb/mpc8313e-rdb-leds.patch
new file mode 100644
index 0000000000..63ccac7ed0
--- /dev/null
+++ b/recipes/linux/linux-2.6.26/mpc8313e-rdb/mpc8313e-rdb-leds.patch
@@ -0,0 +1,204 @@
+diff -urN linux-2.6.26.orig/drivers/leds/Kconfig linux-2.6.26/drivers/leds/Kconfig
+--- linux-2.6.26.orig/drivers/leds/Kconfig 2008-07-13 23:51:29.000000000 +0200
++++ linux-2.6.26/drivers/leds/Kconfig 2008-08-26 18:41:50.000000000 +0200
+@@ -147,6 +147,12 @@
+ To compile this driver as a module, choose M here: the
+ module will be called leds-clevo-mail.
+
++config LEDS_MPC8313E_RDB
++ tristate "LED Support for MPC8313E-RDB LEDs"
++ depends on LEDS_CLASS && PPC_83xx
++ help
++ This option enables support for the LEDs on MPC8313E-RDB board.
++
+ comment "LED Triggers"
+
+ config LEDS_TRIGGERS
+diff -urN linux-2.6.26.orig/drivers/leds/leds-mpc8313e-rdb.c linux-2.6.26/drivers/leds/leds-mpc8313e-rdb.c
+--- linux-2.6.26.orig/drivers/leds/leds-mpc8313e-rdb.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.26/drivers/leds/leds-mpc8313e-rdb.c 2008-08-26 18:41:50.000000000 +0200
+@@ -0,0 +1,173 @@
++/*
++ * drivers/leds/leds-mpc8313e-rdb.c
++ * Copyright (C) 2007-2008 Jeremy Laine <jeremy.laine@bolloretelecom.eu>
++ * Copyright (C) 2007-2008 Leon Woestenberg <leon@sidebranch.com>
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file COPYING in the main directory of this archive for
++ * more details.
++ *
++ * MPC8313E-RDB LEDs driver
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/ioport.h>
++#include <linux/leds.h>
++#include <linux/err.h>
++#include <asm/io.h>
++
++/* note the board is not wired for read access from the LED buffer */
++#define LEDS_BASE 0xfa000000
++#define LEDS_SIZE 0x2
++
++static struct platform_device *leds_pdev = NULL;
++static struct resource *led_mem = NULL;
++static void *led_io = NULL;
++static u8 led_state = 0xff;
++
++struct mpc8313_led {
++ struct led_classdev cdev;
++ u8 bitmask;
++};
++
++static void mpc8313leds_set(struct led_classdev *led_cdev, enum led_brightness value)
++{
++ struct mpc8313_led *led_dev = container_of(led_cdev, struct mpc8313_led, cdev);
++ if (value)
++ led_state &= ~led_dev->bitmask;
++ else
++ led_state |= led_dev->bitmask;
++ iowrite8(led_state, led_io);
++}
++
++/* led0 is red, led1 is yellow, led2-7 are green */
++static struct mpc8313_led mpc8313_leds[] = {
++ {
++ .cdev = {
++ .name = "mpc8313:led0",
++ .brightness_set = mpc8313leds_set,
++ },
++ .bitmask = 128,
++ },
++ {
++ .cdev = {
++ .name = "mpc8313:led1",
++ .brightness_set = mpc8313leds_set,
++ },
++ .bitmask = 64,
++ },
++ {
++ .cdev = {
++ .name = "mpc8313:led2",
++ .brightness_set = mpc8313leds_set,
++ },
++ .bitmask = 32,
++ },
++ {
++ .cdev = {
++ .name = "mpc8313:led3",
++ .brightness_set = mpc8313leds_set,
++ },
++ .bitmask = 16,
++ },
++ {
++ .cdev = {
++ .name = "mpc8313:led4",
++ .brightness_set = mpc8313leds_set,
++ },
++ .bitmask = 8,
++ },
++ {
++ .cdev = {
++ .name = "mpc8313:led5",
++ .brightness_set = mpc8313leds_set,
++ },
++ .bitmask = 4,
++ },
++ {
++ .cdev = {
++ .name = "mpc8313:led6",
++ .brightness_set = mpc8313leds_set,
++ },
++ .bitmask = 2,
++ },
++ {
++ .cdev = {
++ .name = "mpc8313:led7",
++ .brightness_set = mpc8313leds_set,
++ },
++ .bitmask = 1,
++ },
++};
++
++static int mpc8313leds_probe(struct platform_device *pdev)
++{
++ int i;
++ int ret;
++
++ for (i = ret = 0; ret >= 0 && i < ARRAY_SIZE(mpc8313_leds); i++) {
++ ret = led_classdev_register(&pdev->dev,
++ &mpc8313_leds[i].cdev);
++ }
++
++ if (ret < 0 && i > 1) {
++ for (i = i - 2; i >= 0; i--)
++ led_classdev_unregister(&mpc8313_leds[i].cdev);
++ }
++
++ return ret;
++}
++
++static int mpc8313leds_remove(struct platform_device *pdev)
++{
++ int i;
++
++ for (i = ARRAY_SIZE(mpc8313_leds) - 1; i >= 0; i--)
++ led_classdev_unregister(&mpc8313_leds[i].cdev);
++
++ return 0;
++}
++
++static struct platform_driver mpc8313leds_driver = {
++ .driver = {
++ .name = "mpc8313-leds",
++ .owner = THIS_MODULE,
++ },
++ .probe = mpc8313leds_probe,
++ .remove = mpc8313leds_remove,
++};
++
++static int __init mpc8313leds_init(void)
++{
++ if (!(led_mem = request_mem_region(LEDS_BASE, LEDS_SIZE, "mpc8313-leds")))
++ return -ENOMEM;
++ if (!(led_io = ioremap(LEDS_BASE, LEDS_SIZE)))
++ {
++ release_mem_region(LEDS_BASE, LEDS_SIZE);
++ led_mem = NULL;
++ return -ENOMEM;
++ }
++ iowrite8(led_state, led_io);
++
++ leds_pdev = platform_device_register_simple("mpc8313-leds", -1, NULL, 0);
++
++ return platform_driver_register(&mpc8313leds_driver);
++}
++
++static void __exit mpc8313leds_exit(void)
++{
++ if (led_mem) release_mem_region(LEDS_BASE, LEDS_SIZE);
++ led_mem = NULL;
++ platform_driver_unregister(&mpc8313leds_driver);
++
++ platform_device_unregister(leds_pdev);
++}
++
++module_init(mpc8313leds_init);
++module_exit(mpc8313leds_exit);
++
++MODULE_AUTHOR("Jeremy Laine <jeremy.laine@bolloretelecom.eu>");
++MODULE_DESCRIPTION("MPC8313E-RDB LED driver");
++MODULE_LICENSE("GPL");
+diff -urN linux-2.6.26.orig/drivers/leds/Makefile linux-2.6.26/drivers/leds/Makefile
+--- linux-2.6.26.orig/drivers/leds/Makefile 2008-07-13 23:51:29.000000000 +0200
++++ linux-2.6.26/drivers/leds/Makefile 2008-08-26 18:42:10.000000000 +0200
+@@ -21,6 +21,7 @@
+ obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o
+ obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o
+ obj-$(CONFIG_LEDS_FSG) += leds-fsg.o
++obj-$(CONFIG_LEDS_MPC8313E_RDB) += leds-mpc8313e-rdb.o
+
+ # LED Triggers
+ obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-01 13:41:22 +0000