summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2012-07-16gmp: upgrade to 5.0.5Bogdan Marinescu
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16sysvinit-inittab_2.88dsf.bb: Allow multiple serial port consoles to be definedMatthew McClintock
Set SERIAL_CONSOLES if you want to define multiple serial consoles, also if you need to check for the presence of the serial consoles you can also define SERIAL_CONSOLES_CHECK to determine if these are present when you boot. This will prevent error message that pop up when the serial port is not present. SERIAL_CONSOLES = "115200;ttyS0 115200;ttyS1 115200;ttyEHV0" SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" The above lines in machine.conf or elsewhere will have the effect of having two serial consoles and removing any that are not present at boot Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16runqemu: Fix running qemu when build without glKhem Raj
When gl is disabled in PACKAGECONFIG then we dont need to check for supporting libs to be present before running qemu. Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16image_types.bbclass: Default XZ_COMPRESSION_LEVEL to -e -6Andrei Gherzan
Having XZ_COMPRESSION_LEVEL on -e -9 and -T 0 will make xz eat more than 6Gb memory. Reduce this to -6 to make xz to use about 471Mb on the tested machine. Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Andrei Gherzan <andrei@gherzan.ro> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16image_types.bbclass: Add XZ variable to set number of threads to be used ↵Andrei Gherzan
while compressing Default this variable to 0. This will make xz use as many threads as there are CPU cores on the system. Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Andrei Gherzan <andrei@gherzan.ro> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16image_types.bbclass: Fix COMPRESS_CMD for xz to redirect compressed data to fileAndrei Gherzan
Having -c modifier makes xz to output the compressed data to stdout. In this way the needed data will be in the do_rootfs log. Redirect data to ${IMAGE_NAME}.rootfs.${type}.xz . Signed-off-by: Andrei Gherzan <andrei@gherzan.ro> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16cpan.bbclass: Fix CCFLAGS.Xin Ouyang
We should not just replace CCFLAGS with CFLAGS while compiling, because this may cause run-time errors with perl's DynaLoader.pm. Tested on qemux86 with new libnet-libidn-perl bb recipe: root@qemux86:~# perl -e "use Net::LibIDN" Not a CODE reference at /usr/lib/perl/5.14.2//DynaLoader.pm line 213. END failed--call queue aborted at /usr/lib/perl/vendor_perl/5.14.2//Net/LibIDN.pm line 213. Compilation failed in require at -e line 1. BEGIN failed--compilation aborted at -e line 1. Signed-off-by: Xin Ouyang <Xin.Ouyang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16puzzles: convert to use SVNSaul Wold
Recently the tarball has been changing due the fact it gets rebuilt nightly and timestamps are getting updated and changed internal to the tarball. Moving back to SVN to try and address this. Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16Update proto -> protocol for recipesSaul Wold
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16xz: update to 5.1.2alphaKoen Kooi
This contains bugfixes from the 5.0.3 and 5.0.4 releases Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16task-core-sdk.bb: add libgomp and libgomp-dev by RECOMMENDSZhenhua Luo
Signed-off-by: Zhenhua Luo <b19537@freescale.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16python-dbus: upgrade to 1.1.0Bogdan Marinescu
Tested by compiling core-image-basic Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16classes/rootfs_deb: use more reliable check for package existencePaul Eggleton
It turns out "apt-cache showpkg" does return some information when a package does not exist but another package recommends it, which can occur for empty *-dev packages; so use "apt-cache policy" with a different line count instead. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16linux-libc-headers: updated to 3.4.3Bogdan Marinescu
Tested by building core-image-sato-sdk. Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16package.bbclass: Allow overriding of debugedit starting pathPeter Seebach
In the usual case, the computed path used for debugedit to fix up path references for the target filesystem is correct. However, prebuilt binary components, such as prebuilt toolchains, can have debug paths that do not reflect paths within the local build directory. Providing an override lets us continue to use the standard debugedit logic in package.bbclass. Signed-off-by: Peter Seebach <peter.seebach@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16runqemu/mips: adjust runqemu script to support mipsel machineDennis Lan
Signed-off-by: Dennis Lan <dennis.yxun@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16slang: change char type to signed char in macrosRoy.Li
Fix [YOCTO 2726] C language has 3 distinct char types: char unsigned char signed char A char has the same range of values as signed char on X86, but same as unsigned char on ARM which made Slang's typecast() and array_sort() unable to work for char value on ARM, since Slang is assuming "char" as "signed char". Now we change "char" as "signed char" explicitly in util/mkslarith2.sl, and use it to regenerate src/slarith2.inc Signed-off-by: Roy.Li <rongqing.li@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16gconf: Disable gtk supportRichard Purdie
There are only a couple of helper utilities within gconf that need gtk+ as a dependency and those are unused and pretty useless. We might as well drop the dependency on gtk and allow more parallel builds by reducing dependency bottlenecks. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16rpm_5.4.9.bb: fix builds on systems with older libcMatthew McClintock
| dbconvert.o: In function `rpmdb_convert': | /local/jenkins/jobs/yocto-upstream/workspace/label/master/machine/p4080ds/poky/master/tmp/work/x86_64-linux/rpm-native-5.4.9-r45/rpm-5.4.9/tools/dbconvert.c:126: warning: the use of `tempnam' is dangerous, better use `mkstemp' | dbconvert.o: In function `main': | dbconvert.c:(.text+0x923): undefined reference to `htobe32' | dbconvert.c:(.text+0xaa4): undefined reference to `htole32' | dbconvert.c:(.text+0xac9): undefined reference to `htole32' Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16mkelfimage: Upstream fixed packaging issue so upgrade to e1e6a91Raymond Danks
Address QA issue: Files/directories were installed but not shipped. New revision contains patch to mkelfimage removing /usr/share/mkelfImage/elf32-i386 directory from Makefile install target. http://review.coreboot.org/#/c/1195/ Signed-off-by: Raymond Danks <ray.danks@se-eng.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16package install failure on systems without /sbin/ldconfigAmy Fong
Package install failures due to issues in post install rules. package_do_shlibs only looks for libraries in a directory "lib", this should be modified to the variable baselib. ldconfig_postinst_fragment failure observed on systems without /sbin/ldconfig [ -x /sbin/ldconfig ] && /sbin/ldconfig results in the post install rule returning a failure. Modify to if [ -x /sbin/ldconfig ]; then /sbin/ldconfig; fi Signed-off-by: Amy Fong <amy.fong@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16conf/machine: replace TUNE_CONFLICTS with TUNECONFLICTSMartin Jansa
* it wasn't consistent with other machine configs * reported 2 months ago.. http://lists.linuxtogo.org/pipermail/openembedded-core/2012-May/022154.html Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-12perf: add perl, python to DEPENDSTom Zanussi
perf has perl and python compile-time dependendencies, add them. Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-11linux-yocto/3.0: perf scripting supportBruce Ashfield
Updating the 3.0 SRCREVs to pickup the recent perf scripting fixes. cef17a1 perf: add sgidefs.h to for mips builds 3258da3 perf: change --root to --prefix for python install 1f9c25b perf: add 'libperl not found' warning f2b1bf1 perf: use pkg-config instead of python-config 568e05f perf tools: Add support to install perf python extension 7e47f81 Revert "perf: hard-code NO_LIBPERL/NO_LIBPYTHON" Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-11connman-gnome: remove unused patches, they were all merged upstreamRoss Burton
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-11libgomp: add libgomp (openmp) library, and build for powerpc targets by defaultMatthew McClintock
Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-11gcc: gcc-cross-canadian: use correct location for libraries for powerpc64Matthew McClintock
This fixes the issue where gcc invokes the linker with an incorrect -L library location and gives up because it can't find libraries. It was looking in a /lib folder instead of /lib64 Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-11gcc-configure-common.inc: use --with-long-double-128 on powerpc to comply ↵Matthew McClintock
with ABI Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-11openjade-native_1.3.2.bb: fix typo and change the deps exclusion to correct varMatthew McClintock
Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-11dtc.inc: fix for libdir == /usr/lib64Matthew McClintock
On 64bit systems dtc will still install libaries in /usr/lib unless we havet this override Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-11valgrind: fix default.supp missing issueZhenhua Luo
When run valgrind, following error appears: ==2254== FATAL: can't open suppressions file "/usr/lib/valgrind/default.supp" Signed-off-by: Zhenhua Luo <b19537@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-11directfb: disable imlib2 explicitlyDennis Lan
When HOST machine installed imlib2, compiling directfb in OE will direct this library, and try to use it. This is wrong, since there is no imlib in OE, so we should disable it explicitly here. Error as following: | idirectfbimageprovider_imlib2.c:64:20: fatal error: Imlib2.h: No such file or directory Config.log as following (which is wrong): configure:19602: checking for imlib2-config configure:19620: found /usr/bin/imlib2-config configure:19633: result: /usr/bin/imlib2-config Signed-off-by: Dennis Lan <dennis.yxun@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-10subversion: do_install failed (parallel issue)Robert Yang
install-neon-lib needs libsvn_delta-1.la which will be regenerated during libsvn_delta-1.la's installation, if libsvn_delta-1.la is in regenerating and at the same time install-neon-lib links it, the error willl happen. The error message is: /bin/ld: cannot find -lsvn_delta-1 collect2: error: ld returned 1 exit status This is a parallel issue, so it doesn't happen often. Note: The autoreconf doesn't generate build-outputs.mk, it would be generated by autogen.sh (use build.conf as the input), but autogen.sh isn't suitable for cross compiling, so both modified build-outputs.mk and build.conf. [YOCTO #2727] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-10gnupg: ensure deterministic build by disabling libcurlSaul Wold
gnupg has it's own fake curl, since we use gnupg with zypper, there does not seem to be a strong reason to add curl to the depends list. Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-10perf: add perf-tui featureTom Zanussi
Add a new feature named 'perf-tui'. Adding this into the PERF_FEATURES variable in perf.inc will enable the perf TUI (Text-base UI) user interface on a target, which adds libnewt and turns on the perf text UI options in perf, if perf is included in an image. If 'perf-tui' isn't named as a feature (the default), the perf TUI will be disabled and unavailable. Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-10perf: add perf-scripting featureTom Zanussi
Add a new feature named 'perf-scripting'. Adding this into the PERF_FEATURES variable in perf.inc will enable perf scripting on a target, which will turn on all the language bindings currently available in perf (Perl and Python), if perf is included in an image. If 'perf-scripting' isn't named as a feature (the default), all perf language bindings will be disabled and unavailable. Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-10perf: add perf.incTom Zanussi
Add a perf.inc to contain utility functions and definitions and to avoid cluttering up the main recipe. Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-10linux-yocto/3.4: perf, unionfs and yaffs2 fixesBruce Ashfield
Updating the 3.4 SRCREVs to pickup the following changes: 6297e4c perf: add sgidefs.h to for mips builds 69b7817 yaffs: add leading underscore to mtd_info function names 160f1ac yaffs: change type for mode to umode_t 2d875e8 Unionfs: use mode_t Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-10linux-yocto/3.2: perf: fix mips buildBruce Ashfield
Updating SRCREVs for the following fix: Author: Tom Zanussi <tom.zanussi@intel.com> Date: Tue Jul 10 09:38:40 2012 -0500 perf: add sgidefs.h to for mips builds Allow Python.h to find the definitions it needs on mips i.e. get rid of the error: "_ABIN32" is not defined. Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-10opkg: fix installation of dev / dbg packagesPaul Eggleton
OE-Core revision ffe93e2a099e4cadb1829dc12a58a6d7bef9a5a7 moved opkg's configuration file into /etc/opkg, and opkg always reads all files under this directory even if -f is specified (as it is during do_rootfs in order to specify our own generated config file), and this means that after opkg-collateral is installed into the rootfs, this version of the config is used, resulting in opkg ignoring the list of packages it has already downloaded (since it now sees list_dir as /var/lib/opkg instead of the default /var/lib/opkg/lists) and thus it fails to install any of the "attemptonly" packages (including *-dev, *-dbg, etc.). If we change the -f option to ignore configuration files in /etc/opkg then we no longer have this problem. Fixes [YOCTO #2595]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-10ccache: Ensure CCACHE_DIR is cleaned by do_clean taskRichard Purdie
This ensures a rebuild does really build from scratch when ccache is in use. [YOCTO #2696] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-10libxml2: Fix libzypp ansidecl related build failuresRichard Purdie
cmake looks at all include statements, even if they're not used. To make builds deterministic and avoid needing to add binutils as a dependency for libzypp, completely remove the include from the header file, even if it is never used. This avoids issues where you'd build binutils, then libzypp, then remove binutils (and hence ansidecl.h) and then recompile libzypp which would still have the dependency and hence fail. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-10bitbake.conf: Drop the remainder for the FETCH/CHECK/RESUMECOMMAND variablesRichard Purdie
This completes the removal of these older variables and their replacement with FETCHCMD. This change requires the latest bitbake to operate optimally. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-10bitbake.conf: Add passive-ftp option to the default FETCHCMD_wgetRichard Purdie
This brings it into sync with the wget FETCHCOMMAND and RESUMECOMMAND variables. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-10bitbake.conf: Drop the old svn FETCH/UPDATE/RESUMECOMMAND variablesRichard Purdie
The svn fetcher converted to use FETCHCMD a long time ago. This drops several variables which are effectively useless. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-10core-image-*.bb: Remove usage of EXTRA_IMAGE_FEATURES from some .bb filesRobert P. J. Day
Replace the usage of EXTRA_IMAGE_FEATURES in a small number of .bb files with IMAGE_FEATURES, and leave the use of EXTRA_IMAGE_FEATURES for developers in their local.conf files, to avoid the possibility of undesirable side effects. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-10core-image-*: remove copyright noticesPaul Eggleton
These image recipes are meant to be examples that people can copy and modify completely for their own purposes, and most of them are so trivial they don't really need copyright notices anyway, so trim them off. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-10core-image-minimal-dev: base on core-image-minimalPaul Eggleton
When core-image-minimal has been updated in the past, we have on several occasions missed applying those updates to this recipe, so let's just base it directly on core-image-minimal and completely avoid that problem in future. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-10libgsmd - removePaul Eggleton
This project has been unmaintained for some time, and even the OpenMoko project is not using it any more (in favour of FSO). Since we have ofono in OE-Core which replaces and surpasses its functionality, we can remove libgsmd. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-10linux-yocto/3.2: perf scripting updatesBruce Ashfield
Updating the 3.2 SRCREVs to reflect the perf scripting fixes by TomZ standard/default/base: 0ec416e perf: change --root to --prefix for python install 18ad076 perf: add 'libperl not found' warning e0f641d perf: use pkg-config instead of python-config 3195098 Revert "perf: hard-code NO_LIBPERL/NO_LIBPYTHON" meta: 07ee09b features/ftrace: enable FTRACE_SYSCALLS Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-07 01:03:00 +0000