| Age | Commit message (Collapse) | Author |
|---|
|
Fixed test failure caused by using bootimg_dir path
instead of kernel_dir to find systemd-efi bootloader:
FAIL: test_systemd_bootdisk (oeqa.selftest.wic.Wic)
...
FileNotFoundError: [Errno 2] No such file or directory:
'tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/recipe-sysroot/usr/share'
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently, if something is added to a sysroot, its hash remains unchanged,
and it continues to be buildable, it doesn't get removed from the sysroot.
This patch handles the case where something is removed from DEPENDS or
[depends].
It does introduce its own issue where something could get removed even
though some other task in parallel may have the same requirement. This
case should be extrememly rare and fixing the more common DEPENDS removal
is likely the bigger win though.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Changed were made to the code but not reflected in vardepsexclude, fix this.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The original description for this was:
"""
Since we clean out do_populate_sysroot if do_configure runs, don't
allow do_populate_sysroot_setscene functions if we're going to
run do_configure.
"""
With RSS, we don't need to clean do_populate_sysroot any more. Since
we no longer do that, this function also has no purpose any longer
and can also be removed.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With recipe specific sysroots its now pointless to do this, may as well
save the cpu cycles.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
BB_SETSCENE_VERIFY_FUNCTION2 replaced BB_SETSCENE_VERIFY_FUNCTION
and due to our minimum bitbake requirements there is no point in
retaining the older version any more.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make use of lnr/ln -r while creating relative symlinks than guessing the
relalive path.
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
/bin, /sbin, /lib are replaced with ${base_bindir}, ${base_sbindir} and
${base_libdir}.
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fix the path in example so that '/usr/bin/tunctl' could be found under
this path.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Rename local function to avoid conflicts with compiler intrinsics
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Try to avoid native recipes accidentally being dependent on
MACHINE_FEATURES. This simple change doesn't prevent MACHINE_FEATURES
set via MACHINE_FEATURES_BACKFILL sneaking through, but it's better
than nothing.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Update the list of available IMAGE_FEATURES with the sub-features of
'debug-tweaks' and add 'splash'.
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Replace hardcoded '/lib' in kernel firmware installation path with
${nonarch_base_libdir}.
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #9542]
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* respect it for incremental rootfs generation
* add lists_dir option to opkg.conf
* also fix setting info_dir and status_file when they use default value, the
problem is that self.opkg_dir is already prefixed with rootfs directory,
comparing it with /var/lib/opkg always returned false and the options were
appended to config file unnecessary
* with opkg 0.3.4 we can use VARDIR prefix added in:
commit d2a8e23dc669adc398f4bb8bcfcabfcf925708f7
Author: Florin Gherendi <floring2502@gmail.com>
Date: Mon Dec 19 12:25:38 2016 +0200
libopkg: make the /var and /etc directories configurable at compile time.
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* when OPKGLIBDIR doesn't have the default /var/lib value it will
silently fail to copy package database from normal rootfs to debugfs
rootfs and then when trying to install *-dbg complimentary packages
it won't install anything, because installed_pkgs.txt file generated
from debugfs is empty
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The windres binutils binary which is used for Windows resource files
requires utf-16 and cp1252 encoding support in order to correctly
generate resource files with strings. As such when using uninative to
build mingw resources for a nativesdk target the windres binary is
executed on the native host, thus using the uninative libc and gconv
modules.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
rpm 5.x was packaging build tools separately, so we need to unbreak
things that relied on that.
[YOCTO #11167]
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is entirely unnecessary (we can ask the signer backend to export the
key to a file when needed), and was causing confusing selftest failures
due to the variable being set from two different places.
[YOCTO #11191]
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Using RPM deploy dir was causing errors when pre-built images were
used with these steps:
https://wiki.yoctoproject.org/wiki/Quality_Assurance_yocto_project
[YOCTO #11173]
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This test case builds wic image using rawcopy plugin
running wic directly.
[YOCTO #10618]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed long lines, indentation and one unused variable.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added test_rawcopy_plugin_qemu test case and wks template.
This test builds ext4 rootfs image, copies it to the root
partition of the wic image using rawcopy plugin and
boots wic image in qemu.
[YOCTO #10618]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Used wic-tools STAGING_DATADIR if syslinux can't be found
in default bootimg_dir.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Removed do_install_disk and do_configure_partition methods from
bootimage-partition, fsimage and rawcopy plugins as they're empy
and not used.
[YOCTO #10618]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Default value for bootimg_dir was not set in main wic script
unlike the rest of artifacts: kernel_dir, roofts_dir and
native_sysroot. Set it to the value of STAGING_DATADIR for
consistency and to avoid confusion of wic plugin developers.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
sparse_copy creates output file that is smaller than input
file when input file ends with unmapped blocks.
Used truncate(<input file size>) when output file is created
to ensure the size of output file will always be equal to
the size of input file.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
bootimg_dir is usually set to the value of STAGING_DATADIR and
kernel_dir - to the value of DEPLOY_DIR_IMAGE, so usage of
kernel_dir is more logical in bootimg-efi, bootimg-partition and
rawcopy plugins.
Replaced usage of bootimg_dir to kernel_dir in 3 above mentioned
plugins that use DEPLOY_DIR_IMAGE as a default artifact location.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Changing bootimg_dir in plugins is a dangerous hack as this
value comes from wic command line and can be used by multiple
plugins.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Removed broken unused plugin.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When you enable the systemd DISTRO_FEATURE, opkg-native contains systemd units
which have a relocation fixme list. When systemd isn't in DISTRO_FEATURES, there
are no fixmes required. Unfortunately as sstate isn't cleaning up its installation
directory before use, if you install the systemd version, then install the
non-systemd version from sstate, it would leave behind the fixme file from the
systemd version and breakage results as it would try and fixup files which don't
exist.
The solution is to ensure the unpack/install directory is clean before use. It
does raise other questions about opkg-native, systemd and DISTRO_FEATURES but there
is an underlying sstate issue here too which would cause missing file failures.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Not sure why this cleanup is disabled but it clearly should be running
so enable it.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I've been debugging a selftest failure on Centos7. The problem turns out
to be the elderly git version (1.8.3.1) on those systems. It means that
the system doesn't correctly checksum changed files in the source tree,
which in turn means do_compile fails to run and this leads to the following
selftest failure:
======================================================================
FAIL [141.373s]: test_devtool_buildclean (oeqa.selftest.devtool.DevtoolTests)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/meta/lib/oeqa/selftest/devtool.py", line 530, in test_devtool_buildclean
assertFile(tempdir_mdadm, 'mdadm')
File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/meta/lib/oeqa/selftest/devtool.py", line 497, in assertFile
self.assertTrue(os.path.exists(f), "%r does not exist" % f)
AssertionError: False is not true : '/tmp/devtoolqag88s39z8/mdadm' does not exist
The solution is to use -A on the git add commandline which matches the behaviour
in git 2.0+ versions and resolves the problem.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
wic has a new flag for setting a fixed parition size --fixed-size. Add
tests that verify if partition is indeed sized properly and that errors
are signaled when there is not enough space to fit partition data.
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Instead of assuming that bzImage is available, query bitbake enviroment
for KERNEL_IMAGETYPE.
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Wic tests will unconditionally attempt to build images that may require
dependencies that are incompatible with current target.
Resolve this by consulting HOST_ARCH first (which defaults to TARGET_ARCH)
before proceeding to build images that may be incompatible.
A convenience decorator only_for_arch() can be used to skip test cases for
specific architectures.
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Use wictestdisk instead of directdisk thus allowing more tests to be run on
non-x86 compatible machines.
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add a kickstart for an image that is not limited to use on x86 compatible
machines. This allows us to run more wic tests on non-x86 architectures.
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If some layer depends on other tries to find layer dependency, if the
layer dependency isn't found avoid to test the layer and notice the
user.
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Sometimes there is a need to only analyze the layer specified by the
command line, the new option -n will disable autodiscovery of layers
and only will try to test specified layers.
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The layers isn't required to have a dirctory name start with meta-
so remove the validation.
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It is useful to know which layer provided a given recipe and its
binary packages.
Many projects combine a number of layers and some of them
also provide same recipe names in which case bitbake
can prioritize between them. buildhistory can record
the decision by saving the layer from where the recipe
was taken from.
Also, if a project is split to sub projects which maintain
recipes in different meta layers, then meta layer specific
summaries of e.g. disk usage can be calculated if
source recipes meta layer name is recorded for example in
buildhistory.
If source layer is not in build history, then layer providing
the recipe can be exported from build environment using
'bitbake-layers show-recipes', but it takes a long time to execute
since all recipes are parsed again and requires full source tree
with correct build configuration.
This patch exports the name of layer as configured in BBFILE_COLLECTIONS
append of its layer.conf. 'bitbake-layers show-recipes' exports the
meta layers directory path name. For several open source layers
these are different, e.g. meta-openembedded/meta-perl/conf/layer.conf
is perl-layer, poky/meta/conf/layer.conf is core,
poky/meta-skeleton/conf/layer.conf is skeleton etc.
Signed-off-by: Mikko Rapeli <mikko.rapeli@bmw.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
For the native tools, a static patch inserted gcc/g++/ld/ar while later
adding BUILD_LDFLAGS and BUILD_CFLAGS with sed. Now it's all done with sed,
which has the advantage that it uses the actual compile variables. However,
in practice those are the same.
More importantly, picking the build tools for the target was
broken. ovmf-native tried to insert TARGET_PREFIX into the tools
definition file, but that variable is empty in a native recipe. As a
result, "gcc" was used instead of "${HOST_PREFIX}gcc", leading to an
undesirable dependency on the host compiler and potentially
(probably?!) causing some of the build issues that were seen for ovmf.
The new approach is to override the tool selection in ovmf-native so
that the HOST_PREFIX env variable is used, which then gets exported
during do_compile for the target.
While at it, Python code that gets appened to do_patch only to call
shell functions gets replaced with the do_patch[postfuncs] mechanism.
Incremental builds now always use the tools definition from the
current ovmf-native; previously, only the initial build copied the
template file.
Probably the entire split into ovmf-native and ovmf could be
removed. This merely hasn't been attempted yet.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The meta-world-pkgdata recipe can be modified when a layer is added
may be can add recipes to world target, so exclude by default.
[YOCTO #11162]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Only create a log file when --output-log option is specified, since
logger is dumping to stdout by default is better to let the user
decide if a log needs to be created.
[YOCTO #11160]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The common unix tools uses stdout as standard for log output, by default
python logging uses stderr if not stream is specified.
[YOCTO #11160]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It is a good idea to let the script to choose what stream wants
to dump the logging output.
[YOCTO #11160]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Currently, bin/go and bin/gofmt collide between go-native
and go-bootstrap-native packages, these are scripts anyway
which call the go compiler proper from right install, in
this case create go1.4 and gofmt1.4 names for these scripts
to avoid namespace collision
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
Ed Bartosh
Richard Purdie
Amarnath Valluri
Chen Qi
Khem Raj
Andre McCurdy
Trevor Woerner
Alexander Kanavin
Martin Jansa
Nathan Rossi
Maciej Borzecki
Aníbal Limón
Mikko Rapeli
Patrick Ohly