| Age | Commit message (Collapse) | Author |
|---|
|
I noticed that using bitbake-layers add-layer followed by a devtool
command resulted in bitbake re-parsing all of the recipes, which is
annoying. Upon closer inspection I could see that devtool was moving the
workspace layer path to the end of BBLAYERS if it happened to be
somewhere in the middle - there's no need for it to be doing this. This
occurred because we were passing the current workspace path to remove
and the "new" path to add even if the path is not being changed, and I
think earlier versions of bb.utils.edit_bblayers_conf() didn't move the
existing entry under these circumstances as it clearly does now. Fix it
so we only pass the path to be removed if we're actually changing the
path.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This looks like some debug printing that was left in by accident.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
devtool upgrade did not properly handle setting SRC_URI checksums for
recipes that use named SRC_URI entries and also use those names in the
SRC_URI checksums. A further complication was where the name contained
an expression that changed with the version e.g. ${PV} (probably quite
rare, but the dnsmasq recipe in meta-networking is currently one such
recipe.) All of these are now handled properly.
Additionally, drop the _get_checksums() function that wasn't being
called from anywhere in the code.
Note that this now turns nowrap_vars in recipeutils.py to be a list of
regexes, hence things such as [ and ] need to be appropriately escaped.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
devtool finish will check if the destination layer is part of
bblayers.conf so that we avoid the user getting confused about the
recipe vanishing from their configuration if it isn't. devtool finish
also accepts a path underneath a layer so that you have a bit
more control over where it ends up. However if you used a path
underneath a layer then it wasn't converting this to the base of the
layer before checking it against BBLAYERS, thus the warning was being
shown erroneously in that case.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If the git repository for a recipe in the workspace has uncommitted
changes in it then it's possible that the user has forgotten to commit
something, so check and exit if there are any. Provide a -f/--force
option to continue in the case where the uncommitted changes aren't
needed.
Separately, if the repository is in the middle of a rebase or git am /
apply then error out (without the opportunity to force) since the user
really needs to sort this out before finishing.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If S points to a subdirectory of the source rather than the "base" of
the source tree then print that rather than the subdirectory path when
telling the user they need to remove the source tree, since that is the
directory that they will need to remove.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
After some reconsideration I think it's a bit annoying for users to be
forced to use an option to work with recipes where the file isn't in the
workspace, so let's just have these commands check the workspace first
for the recipe, and if it isn't there then load the cache and get it
that way.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* Show a warning in devtool upgrade if the version is less than the
current version suggesting that the user may need to bump PE in the
recipe
* Show a warning in devtool add and devtool upgrade if the version looks
like a pre-release version suggesting using a version number that
won't mess up the progression when you come to upgrade to the final
release version.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If S points to a subdirectory of the source rather than the "base" of
the source tree then we weren't handling the oe-local-files directory
properly - it got extracted to the base of the tree but devtool
update-recipe and devtool finish assumed it would be under S which would
be the subdirectory, thus it would be missing and devtool would assume
the files had been deleted and remove them from the recipe. Record the
base of the source tree in the bbappend and read it into the in-memory
workspace so we can use that to find out where oe-local-files should be
found.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When devtool upgrade is upgrading to a new version where the source is
fetched as an archive (e.g. a tarball), we create a single commit in the
git repository that is the upgrade from the old version to the new. We
do this by extracting the old source, committing it, deleting all files,
copying in the new files, running git add on each new/changed/deleted
file, and then committing the result. When a lot of files have changed
in an upgrade (such as QEMU 2.8.1.1 -> 2.10.0) the penultimate step of
running git add it can take quite a long time; in order to reduce this
and show some feedback to the user, run git add with batches of 100
files at once and also show a progress bar. In a local test with the
aforementioned QEMU upgrade it took the time down from over 7 minutes
down to about 13 seconds.
Fixes [YOCTO #11948].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
With versions of git older than 2.0, "git add" on a deleted file (i.e.
in this case a file that was removed between versions) will not add the
delete to be committed by default, with the result that the rebase of
patches on top of the new branch will fail. We need to use the -A
option in order to force that for older git versions.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It appears that when fixing the signature unlocking in OE-Core commit
4e9a0be32fc30fb87d65da7cd1a4015c99533aff I swapped the parameters here
and did not test it within the eSDK (it does nothing outside of the
eSDK) resulting in a TypeError when devtool upgrade was used in the
eSDK. Swap the parameters around to the correct ordering.
Fixes [YOCTO #12285].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If a value was split over multiple lines (e.g. as SRC_URI usually is)
then we were inserting the value as one item in the lines list with
newlines between each line. There's nothing wrong with this if you're
writing the list out to a file, but if you want to generate a patch (as
patch_recipe_file() will do if the patch parameter is set to True) then
the diff output looks a bit odd. Split the value before adding it to the
lines list to resolve this.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
find_layerdir() should really return absolute paths, so make it do so.
This fixes devtool finish not deleting files it should do after devtool
upgrade if the specified path is relative, since the devtool finish code
was assuming that find_layerdir() was returning an absolute path.
Fixes [YOCTO #12318].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If the source tree happens to contain a kernel module as an example, a
test or under a "contrib" directory then we shouldn't be picking it up
and making the determination that the entire thing is a kernel module.
An example that triggered this is zstd, which ships a kernel module
under contrib/linux-kernel:
https://github.com/facebook/zstd
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We shouldn't be passing a relative path to the plugins if that's what's
been specified on the recipetool command line.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Backport
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82445
Fixes [YOCTO 12297]
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Rich Felker (9):
fix access by setjmp and longjmp to __hwcap on arm built as thumb2
for executing init array functions, use function type with prototype
fix read-after-free type error in pthread_detach
fix incorrect base name offset from nftw when pathname ends in slash(es)
in dns parsing callback, enforce MAXADDRS to preclude overflow
release 1.1.17
fix regression in glob with literal . or .. path component
fix build regression on ARM for ISA levels less than v5
release 1.1.18
Szabolcs Nagy (1):
math: rewrite fma with mostly int arithmetics
Will Dietz (1):
posix_spawn: use larger stack to cover worst-case in execvpe
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Now that db doesn't PROVIDE virtual/db, remove it from default-providers.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
As there are no alternative providers for virtual/db remove the PROVIDES and
recipes can just depend on db.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
As there are no alternative providers for virtual/db, just depend directly on
db.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The value could be False in which case we should pass that through.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This further cleans up the output of oe-selftest so that runqemu output
is hidden unless tests fail.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently, the fact an error message is shown means the rest of the
task logs are suppressed. In this case we don't want that as it hides
the real errors and useful information. Therefore override this behaviour.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
Remove --disable-glibtest as ./configure no longer has it.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
Drop 0001-nls.m4-Take-it-from-gettext-0.15.patch as it's now
upstreamed.
Remove --disable-xevie option:
https://github.com/GNOME/at-spi2-core/commit/644096a28a47bdf5c6e0c34c9cd5b944df059925
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
Drop upstreamed patch.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
Add a patch to avoid crashing under qemu.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
Remove upstreamed 0001-queryloaders-Make-output-more-reproducible.patch
Rebase fatal-loader.patch
Add a patch to fix a libtiff detection issue.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
Rebase Jussi's GL patches.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
Paul Eggleton
Khem Raj
Ross Burton
Richard Purdie
Alexander Kanavin