Age | Commit message (Collapse) | Author |
|
Set PREFIX via EXTRA_OEMAKE instead of exporting it in do_install_prepend():
than ensuring the correct prefix gets into hiredis.pc, which is generated by
upstream makefile at do_compile() time.
Signed-off-by: Andrea Galbusera <gizero@gmail.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
consolekit depends on virtual/libx11 then it requires x11
distro feature, so add consolekit option only when x11
is in DISTRO_FEATURES.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
This is a really simple init replacement for lightweight container images.
See https://engineeringblog.yelp.com/2016/01/dumb-init-an-init-for-docker.html
for more info.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
We can also switch to using a release archive.
The license checksum change is due to a change in the author's email address.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Linux Kernel Module for ISO 15765-2:2016 CAN transport protocol.
CAN Transport Protocol offers support for segmented Point-to-Point
communication between CAN nodes via two defined CAN Identifiers. This protocol
driver implements data transfers according to ISO 15765-2.
This recipe provides can-isotp.ko kernel module.
Signed-off-by: Andrea Galbusera <gizero@gmail.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
HAVE_NODEJS is a leftover from meta-refkit-core where the
layer had to adapt to different BBLAYER combinations (some
where nodejs wasn't available but mraa/upm were).
mraa/upm nodejs bindings currently fail to build (due to a problem
in swig with nodejs > v7.x) so we keep them disabled until a newer
version of swig lands in OE-core.
The commit adds BINDINGS overrides for armv4/5 to remind that nodejs
isn't available on those architectures.
Signed-off-by: Mikko Ylinen <mikko.ylinen@linux.intel.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
While multilib enabled, if other recipe RDEPENDS python3-libreport,
it failed with:
...
ERROR: Nothing RPROVIDES 'lib32-python3-libreport'
...
Do not use python3-${PN} could fix the issue.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
While multilib enabled, if other recipe RDEPENDS python3-libpwquality,
it failed with:
...
ERROR: Nothing RPROVIDES 'lib32-python3-libpwquality'
...
Do not use python3-${PN} could fix the issue.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Version 5.8 does no longer includes the facebook patent grant and is
licensed under the Apache-2.0 or GPL-2.0 license.
Tests and tools don't compile on armv5 so we disable them.
The tools are never installed anyway so it doesn't make a difference for
the resulting package.
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
* I was still able to reproduce the build failure which was supposed to be
fixed by this patch.
* added comment suggesting to do the same in:
https://github.com/google/leveldb/pull/512/commits/6a6541b339b84070f585ffa1a437ef0e2ae22c9c
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Make this recipe a little more widely visible (has previously appeared
in meta-refkit-core and meta-intel-iot-middleware). Also make couple of
minor tweaks:
* Fix BINDINGS example to use the correct recipe name (copy-paste error)
* Set HOMEPAGE
* Drop AUTHOR as this is field is only really intended for older
software where there is no real point of contact for upstream other
than an author's email address.
* Set same COMPATIBLE_HOST as mraa since upm depends upon it
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Make this recipe a little more widely visible (has previously appeared
in meta-refkit-core and meta-intel-iot-middleware). Also make couple of
minor tweaks:
* Make SUMMARY more accurate by borrowing the first part of the short
description now in the mraa github repo
* Set HOMEPAGE
* Drop AUTHOR as this is field is only really intended for older
software where there is no real point of contact for upstream other
than an author's email address.
* Set COMPATIBLE_HOST to match what is checked by mraa's CMakeLists.txt
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Add build parallelism, since we do not use oe_runmake
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
copy byacc from meta to meta-oe.
Signed-off-by: Huang Qiyu <huangqy.fnst@cn.fujitsu.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Drop two patches:
CVE-2017-12588.patch
0001-core-bugfix-segfault-after-configuration-errors.patch
since they are included in 8.29.
Update the testbench configuration flags.
Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Use '${COMMON_LICENSE_DIR}/MIT' for MIT License to fix the warning:
| WARNING: packagegroup-xfce-base-1.0-r5 do_populate_lic:
${COREBASE}/LICENSE is not a valid license file, please use
'${COMMON_LICENSE_DIR}/MIT' for a MIT License file in LIC_FILES_CHKSUM.
This will become an error in the future
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Signed-off-by: Huang Qiyu <huangqy.fnst@cn.fujitsu.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Signed-off-by: Huang Qiyu <huangqy.fnst@cn.fujitsu.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Signed-off-by: Huang Qiyu <huangqy.fnst@cn.fujitsu.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Drop upstreamed patches
Fix jemalloc build with musl
Fix linking errors due to missing -lpthread
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
efivar v27 started using C11 _Generic keyword in macros but that
is not implemented in gcc until 4.9. This makes efivar-native
(which is a dependency to efivar) build to fail if the builder host
gcc version is < 4.9.
It turns out only 'makeguids' generator needs to be built for the
build arch to generate GENERATED_SOURCES for efivar target build.
'makeguids' sources/includes have no gcc version dependencies so
to fix efivar build when host gcc < 4.9, we simply build 'makeguids'
target for efivar-native.
Signed-off-by: Mikko Ylinen <mikko.ylinen@linux.intel.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Move pywbem to the meta-python layer to avoid missing requirements.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
Since this isn't a python library it doesn't really belong to meta-python.
But I couldn't figure out where else to move it to.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
|
|
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
rsyslog will segfault on startup if
a) the local machine's hostname is set to a non-FQDN name
b) the getaddrinfo() system call fails
This scenario is higly unlikely, but may exist especially with
provisioned VMs which may not properly be able to do name queries
on startup (seen for example on AWS).
This patch fixes the situation and also provides more robustness
for very early startup error messages when some of the error-reporting
subsystem is not yet properly initialized. Note that under these
circumstances, errors may only show up on stderr.
closes https://github.com/rsyslog/rsyslog/issues/1573
Reference:
https://github.com/rsyslog/rsyslog/issues/1573
Upstream patch:
https://github.com/rsyslog/rsyslog/commit/6d258339802cb9f13d8a4a157a4b74eccb902d8f
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
helps compiling on newer architectures and libcs like musl
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
define _GNU_SOURCES to fix compile issue:
execinfo.c:76:5: error: unknown type name 'Dl_info'
| Dl_info info;
| ^~~~~~~
| execinfo.c:83:13: warning: implicit declaration of function 'dladdr' [-Wimplicit-function-declaration]
| if (dladdr(buffer[i], &info) != 0) {
V2: Merged two CFLAGS lines into one.
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
...
|ERROR: libpwquality-1.4.0-r0 do_configure: gettext-native required but
not in DEPENDS for file
|tmp/work/core2-64-poky-linux/libpwquality/1.4.0-r0/libpwquality-1.4.0/configure.ac.
|Missing inherit gettext?
...
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
* as PNBLACKLIST message says, these recipes are blacklisted for long
time and nobody showed any interest to fix them
* remove all unused .patch and .inc files as well
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
* Add support for features: dbus qdevice qnetd snmp
* Add related PACKAGECONFIG
* inherit useradd to add proper user for qnetd service
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
* Replace ${systemd_unitdir}/system with ${systemd_system_unitdir}
* Remove the upstar settings and don't install upstar config files
* Add volatile for sysvinit and tmpfiles for systemd
* Set the correct bash path for init scripts to avoid QA issue:
| corosync-2.4.2: /usr/share/corosync/corosync contained in package corosync
requires /tmp/hosttools/bash, but no providers found in RDEPENDS_corosync?
[file-rdeps]
* The systemd services are intalled properly by "make install",
no need to install manually.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Change SRC_URI to git fetcher, github archives can be regenerated from
time to time with different checksums.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
This sets up the perl interpreter correctly on target package
Also fixes
QA Issue: /usr/bin/sliceprint contained in package enscript requires /mnt/a/oe
/build/tmp/hosttools/perl, but no providers found in RDEPENDS_enscript? [file-rdeps]
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
- logcheck depends on mime-construct which is in meta-perl,
so move it to meta-perl to avoid that meta-oe depends on
meta-perl.
- logcheck should not be run as root, so inherit useradd
and add proper user and group.
- Add missing runtime dependencies according to the file
debian/control and simple test by running "logcheck -ot".
- For syslog, debian directly depends on rsyslog, but logcheck
works with any syslog and we have busybox-syslog, sysklogd,
syslog-ng and rsyslog, so use VIRTUAL-RUNTIME_syslog for the
syslog dependency and set rsyslog as the default, which can be
easily overridden in distro conf file or local.conf.
- Don't install /var/lock when populating rootfs. Do it
through volatile.
- install header.txt for generated mails
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
The 5.7.2 fixed CVE-2017-7401.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Customize HOST_CFLAGS, HOST_CXXFLAGS and HOST_LDFLAGS
to fix do_configure error as previously use the common
CFLAGS and CXXFLAGS in both cross-compile env and host env,
and the option -fstack-protector-strong which not
recognized in host env can result in do_configure
error as below.
| checking whether the host c compiler (gcc -O2 -pipe -g -fstack-protector-strong -D_FORTIFY_SOURCE=2 -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -fstack-protector-strong -Wl,-z,relro,-z,now) works... configure: error: installation or configuration problem: host compiler gcc cannot create executables.
Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|