1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
|
From 5813da3a341c5efd02e0c5f184b72b94e2f60574 Mon Sep 17 00:00:00 2001
From: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Date: Mon, 11 Nov 2013 04:23:00 +0400
Subject: [PATCH 13/44] ARM: pxa: poodle: use new LoCoMo driver
Convert poodle to use new mfd-based LoCoMo driver.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
---
arch/arm/mach-pxa/Kconfig | 1 -
arch/arm/mach-pxa/include/mach/poodle.h | 6 ----
arch/arm/mach-pxa/poodle.c | 62 ++++++++++++++++++++++++++++++---
3 files changed, 58 insertions(+), 11 deletions(-)
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index f096836..f13ca78 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -481,7 +481,6 @@ config MACH_POODLE
bool "Enable Sharp SL-5600 (Poodle) Support"
depends on PXA_SHARPSL
select PXA25x
- select SHARP_LOCOMO
config MACH_CORGI
bool "Enable Sharp SL-C700 (Corgi) Support"
diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/include/mach/poodle.h
index b56b193..5905cf1 100644
--- a/arch/arm/mach-pxa/include/mach/poodle.h
+++ b/arch/arm/mach-pxa/include/mach/poodle.h
@@ -81,12 +81,6 @@
#define POODLE_GPIO_L_LCLK (POODLE_SCOOP_GPIO_BASE + 10)
#define POODLE_GPIO_HS_OUT (POODLE_SCOOP_GPIO_BASE + 11)
-#define POODLE_LOCOMO_GPIO_AMP_ON LOCOMO_GPIO(8)
-#define POODLE_LOCOMO_GPIO_MUTE_L LOCOMO_GPIO(10)
-#define POODLE_LOCOMO_GPIO_MUTE_R LOCOMO_GPIO(11)
-#define POODLE_LOCOMO_GPIO_232VCC_ON LOCOMO_GPIO(12)
-#define POODLE_LOCOMO_GPIO_JK_B LOCOMO_GPIO(13)
-
#define POODLE_NR_IRQS (IRQ_BOARD_START + 4) /* 4 for LoCoMo */
extern struct platform_device poodle_locomo_device;
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 195b112..04ae74ce 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -23,6 +23,7 @@
#include <linux/delay.h>
#include <linux/mtd/physmap.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/regulator/machine.h>
@@ -31,6 +32,8 @@
#include <linux/spi/pxa2xx_spi.h>
#include <linux/mtd/sharpsl.h>
#include <linux/memblock.h>
+#include <linux/iio/machine.h>
+#include <linux/mfd/locomo.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -49,7 +52,6 @@
#include <linux/platform_data/video-pxafb.h>
#include <asm/hardware/scoop.h>
-#include <asm/hardware/locomo.h>
#include <asm/mach/sharpsl_param.h>
#include "generic.h"
@@ -179,7 +181,8 @@ static struct resource locomo_resources[] = {
};
static struct locomo_platform_data locomo_info = {
- .irq_base = IRQ_BOARD_START,
+ .gpio_base = -1,
+ .comadj = 118,
};
struct platform_device poodle_locomo_device = {
@@ -192,8 +195,6 @@ struct platform_device poodle_locomo_device = {
},
};
-EXPORT_SYMBOL(poodle_locomo_device);
-
#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
static struct pxa2xx_spi_master poodle_spi_info = {
.num_chipselect = 1,
@@ -424,6 +425,51 @@ static struct i2c_board_info __initdata poodle_i2c_devices[] = {
{ I2C_BOARD_INFO("wm8731", 0x1b) },
};
+static struct iio_map locomo_iio_map[] = {
+ {
+ .consumer_dev_name = "locomo-lcd.0",
+ .consumer_channel = "comadj",
+ .adc_channel_label = "CH0",
+ },
+ { }
+};
+
+static struct i2c_board_info locomo_i2c_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("m62332", 0x4e),
+ .platform_data = locomo_iio_map,
+ },
+};
+
+static struct gpiod_lookup_table poodle_audio_gpios_table = {
+ .dev_id = "poodle-audio",
+ .table = {
+ GPIO_LOOKUP("locomo-gpio", 10, "mute-l", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("locomo-gpio", 11, "mute-r", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("locomo-gpio", 8, "amp-on", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
+static struct gpiod_lookup_table poodle_bl_gpios_table = {
+ .dev_id = "locomo-backlight.0",
+ .table = {
+ GPIO_LOOKUP("locomo-gpio", 9, "flvr", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
+static struct gpiod_lookup_table poodle_lcd_gpios_table = {
+ .dev_id = "locomo-lcd.0",
+ .table = {
+ GPIO_LOOKUP("locomo-gpio", 4, "VSHA", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("locomo-gpio", 5, "VSHD", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("locomo-gpio", 6, "Vee", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("locomo-gpio", 7, "MOD", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
static void poodle_poweroff(void)
{
pxa_restart(REBOOT_HARD, NULL);
@@ -445,6 +491,13 @@ static void __init poodle_init(void)
platform_scoop_config = &poodle_pcmcia_config;
+ if (sharpsl_param.comadj != -1)
+ locomo_info.comadj = sharpsl_param.comadj;
+
+ gpiod_add_lookup_table(&poodle_audio_gpios_table);
+ gpiod_add_lookup_table(&poodle_bl_gpios_table);
+ gpiod_add_lookup_table(&poodle_lcd_gpios_table);
+
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
if (ret)
pr_warn("poodle: Unable to register LoCoMo device\n");
@@ -455,6 +508,7 @@ static void __init poodle_init(void)
pxa_set_ficp_info(&poodle_ficp_platform_data);
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(poodle_i2c_devices));
+ i2c_register_board_info(1, ARRAY_AND_SIZE(locomo_i2c_devs));
poodle_init_spi();
regulator_has_full_constraints();
}
--
1.9.1
|
