| Age | Commit message (Collapse) | Author |
|---|
|
BB_SERVER_TIMEOUT=100 oe-selftest -r devtool.DevtoolTests.test_devtool_build_image
fails, the reason is that internally, the limited_deps flag is set in
the bitbake server and then never cleared. This causes the sysroots to
be setup incorrectly (as per the limited dependency case) and builds
break. There is also potential for corruption of recipecaches.
Add shutdown/cleanup code to ensure these effects don't 'stick'.
This bug is particularly nasty as you can destroy TMPDIR with large
sysroots in build work directories which are prone to break.
Also ensure mtime cache is cleared (to match buildTargets) and
that no lasting changes are made to siggen either which ensures:
BB_SERVER_TIMEOUT=100 oe-selftest -r devtool.DevtoolTests.test_devtool_upgrade_git devtool.DevtoolTests.test_devtool_virtual_kernel_modify
works.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When fetching source for the first time within scripts such as
OpenEmbedded's recipetool, we don't want to be showing warnings about
NPM_SHRINKWRAP or NPM_LOCKDOWN not being set since there's no way we
could have set them in advance. Previously we were using
ud.ignore_checksums to suppress these but since we are now using a more
standard task-based path to fetch the source, we need to disable these
through the metadata. Look for a "noverify" parameter set on the npm URL
and skip the checks if it is set to "1".
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If you run some other operations that result in the cache being
populated, and then call buildFileInternal(), then you can end up in a
situation where the cache already contains information about the recipe.
For example in OE this can now happen when you use devtool upgrade.
Normally this doesn't cause any problems, unless you have a non-absolute
path in BBLAYERS - in buildFileInternal() we are calling matchfile() which
will convert the filename to absolute, but later when taskdata goes to find
the providers of the recipe it finds the non-absolute path, sets up the
task information using this and then the runqueue can't find any tasks
matching the absolute path. To fix this, back out the optimisation I did
earlier in bitbake rev ba53e067a2d448dd63b4ca252557ce98aa8e6321 to avoid
calling parseConfiguration() again, which is unfortunate but does result
in the cached information being that causes the problem being cleared
out.
This fixes "Task do_unpack does not exist for target ..." running
devtool upgrade within intel-iot-refkit.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If you set tracking=True when creating the tinfoil object, that ensures
history is collected for the main datastore, but at the end of parsing
the configuration, history tracking gets turned off to save time with
the result that we don't collect history for any recipes we parse.
Enable tracking when we parse a recipe (and disable it afterwards if we
enabled it) in order to fix this.
This fixes functionality in OE's devtool that relies upon variable
history (such as devtool upgrade updating PV when it's set within a
recipe).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If a task fails during build_targets(), we need to print out the log
lines as knotty does or the user will be missing information about the
failure.
(This should get some deeper refactoring, but now isn't the time for
that.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With config_only=False we launch the UI and it sets up a logger, whereas
when config_only=True we don't, with the result that with True we are
seeing log messages from both our logger and the one set up by the UI.
Suppress our loggers with config_only=True to avoid this.
Fixes [YOCTO #11275] (again).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If for example you run:
bitbake -r somefile.inc
rm somefile.inc
bitbake -e
bitbake will crash with an error about not being able to find somefile.inc. This
is because it tries to reparse the base config for the early getVariable requests
before it sees the updated missing -r option.
Send the updateConfig command earlier to avoid this.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
cooker.reset() can be called before we've actually setup the datastore. Gracefully
handle this case instead of the current traceback+exit.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When we reload the configuration, PRSERV_HOST can change. Therefore
restart the PR Server depending on the new configuration at reparse.
Note that the server has to be started from the right process, it
can't be in the UI which shuts down as that shutdown triggers a shutdown
of its children and the PR Server shuts down too. This is why we need
pre_serve() which ensures its executed in the right context.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently the original prefile and postfile passed when starting bitbake
server are 'sticky'. With the new memory resident model this doesn't make
sense as the server the system is started with isn't special.
This patch changes the code so the prefile/postfile are used if specified
on the commandline and not used otherwise. This makes the behaviour much
more predictable and expected and as an added bonus simplifies the code.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The current passing of "tracking" backwards and forwards, client to server
is ugly and complex and error prone. Instead, set this during showEnvironment
commands triggering a reset there if/as required.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Drop pointless unused function parameter.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The 'needconfig' flag was meant to be the default as most commands do need
it and the "False" cases were the exception. The code was written backwards
with a default False value. Invert this to match the intent, resulting in
the config being reparsed if metadata has changed.
Also ensure the second level configuration is parsed for the getLayerPriorities
command as otherwise it can return stale info.
With these changes:
BB_SERVER_TIMEOUT=100 oe-selftest -r bblayers.BitbakeLayers.test_bitbakelayers_add_remove
passes instead of fails.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Rather than just waiting for 5s, try and get the lockfile. If we gain
the lock, we know we're ready to retry and can skip any remaining timeout.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Its possible for a connection to connect to the server as its shutting down
but before its removed the socket file. This patch:
a) Removes the socket file earlier to avoid connections.
b) Handles EOFError in initial connections gracefully. These occur if the
socket is closed during the server shutdown.
c) Ensure duplicate events aren't shown on the console. This makes debugging
these issues very very confusing.
With these changes the backtrace that was concerning users is hidden and the
server works as expected with a reconnect when it catches it in a bad state.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
URLs do not have to have a path; currently our npm URLs don't, so
encodeurl() needs to handle if the path element isn't specified. This
fixes errors using OpenEmbedded's devtool add / recipetool create on an
npm URL after OE-Core revision ecca596b75cfda2f798a0bdde75f4f774e23a95b
that uses decodeurl() and encodeurl() to change URL parameter values.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The underlying model is already sorted for use in the other view,
add a sorting model for the 'Dependent Tasks' view.
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There is an interesting bug in the current code where a sync command
is not seen until the current async command completes, by which time
the UI may have shut down.
The reason is that if there are idle commands, we may not end up sleeping
in the select call at all, partiularly under heavy load like parsing.
Fix this by calling select with a zero timeout so that we see active
fds and know to read from them. This fixes various problems toaster was
having with the recent server changes.
[YOCTO #11898]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We're seeing the server fail to start within 8s on heavily loaded
autobuilders so increase this timeout to 30s which should be more
than enough time.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There have been cases where the server could loop indefinitely and incorrectly
handle client disconnects. In the EOFError case, ensure a full disconnect
happens in the alternative disconnect path to avoid this.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Writes to the cookerdaemon log and/or the lockfile were meaning the parser
cache was always being invalidated and reparsed. This is unnecessary so
spot accesses to these two common cases and ignore the files from a reparse
perspective.
This doesn't remove many sources of reparse but does improve several
common cases.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a proper function for clearing the mtime cache. Clean up the inotify
event overflow case to err on the side of caution and clear any potentially
now out of sync caches.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The inotify watch events are handled "at idle" which could in theory mean
a command could run before any preceeding inotify events have been processed.
This leads to a theoretical race window where those events may have a
signficicant effect on the command.
Add a mechanism to allow us to ensure all pending events are processed before
running commands.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some of the directories searched by BBFILES are not currently being added
to the inotify watch list. This can mean that added append files are not
noticed leading to misleading metadata results when using
BB_SERVER_TIMEOUT != 0.
We use glob to expand the BBFILES references and without writing our own
implentation, figuring out the directories it searches is hard. We use
some horrible hacks here to intecept the listdir calls, I'm open
to better ways to handle this but this does ensure we have the right
watches set.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The server currently crashes if we hit an EOFError due to controllersock
still being in ready and the continue meaning ready isn't re-evaluated.
Setting the value to False can mean the shutdown code doesn't handle the
situation cleanly.
Clear ready to avoid the crash/loop instead and handle any OSError whilst
we're in here.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If we don't do this, we get basehash mismatch errors occurring from the reparse
which would then set bitbake's error exit code.
This for example would cause oe-selftest -r bbtests.BitbakeTests.test_bbappend_order
to fail with a non-zero BB_SERVER_TIMEOUT.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make BB_SERVER_TIMEOUT = -1 mean no unload forever.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed:
$ export BB_SERVER_TIMEOUT=10000
$ bitbake --server-only
$ bitbake --status-only
[snip]
File "/buildarea/lyang1/poky/bitbake/lib/bb/server/process.py", line 472, in recvfds
msg, ancdata, flags, addr = sock.recvmsg(1, socket.CMSG_LEN(bytes_size))
OSError: [Errno 9] Bad file descriptor
And:
$ export BB_SERVER_TIMEOUT=10000
$ bitbake --server-only -B localhost:-1
$ bitbake --status-only # Everything is fine in first run
$ bitbake --status-only
[snip]
File "/buildarea/lyang1/poky/bitbake/lib/bb/server/process.py", line 472, in recvfds
msg, ancdata, flags, addr = sock.recvmsg(1, socket.CMSG_LEN(bytes_size))
OSError: [Errno 9] Bad file descriptor
This was because self.controllersock was not set to False, so it still ran
sock.recvmsg() when sock was closed.
And also need set command_channel to Flase, otherwise the
self.command_channel.get() will always run when EOF, and cause infinite loop.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There is already a type=float, so the float() is not needed, which also makes
the error clearer:
$ export BB_SERVER_TIMEOUT=10000AA
With float():
$ bitbake quilt-native
[snip]
ValueError: could not convert string to float: '10000AA'
Without float():
$ bitbake quilt-native
[snip]
optparse.OptionValueError: option --idle-timeout: invalid floating-point value: '10000AA'
The second one tells clearly where is wrong.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In combination with the recent server reworking, this change actually
prevents messages sent from tasks from being logged properly. This will
of course give us the duplicated messages back, and I really hate to do
that effectively a second time, but that's better than seeing no error
at all in the case of a failure - we'll have to find the proper way of
avoiding the duplication that doesn't result in some messages going
missing.
This reverts commit 8a5bae76f91f2411187c638a42fa3c762052cf11.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If there are events in the UI queue we want to print them regardless of
whether we're handling an exception or something like SystemExit.
This improves error messages for some other failure cases where currently
no logging would get printed and leave the user confused as to what went
wrong.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
"bitbake -g m4-native -c do_unpack" doesn't list any dependencies in
task-depends.dot. This is because no header describing the task was
added unless a task has dependencies. Tweak the code to fix this.
[YOCTO #10893]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This was originally based on some other code but its mostly misleading
comments now. Massively clean this up and accept its now a total fork.
There are no funciton changes here, just cleanup.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When we create the child, if an exception occurred it was transfering
back into the parent context. We don't want to do that us use a try/finally
to ensure we exit.
We need to ensure a traceback is printed and any queued UI messages which
may not have made it to the client UI at this point.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We have cases where the server is being started but we're not seeing any messages
from it. Add some earlier logging so we can try and better understand where
issues may be occurring.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the connection control socket and the command channel close together,
we can race and hit EOFError exceptions before we close the channel.
Reorder the code to handle this in the correct order and ignore the
EOFError exceptions as they mean the client is disconnecting and shouldn't
terminate the server.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
My previous assertion about FusionForge appears to have been wrong, or
FusionForge has changed behaviour, or both.
FusionForge now mandates that downloads have the Accept header set, despite that
header being optional, and returns a 406 Not Acceptable error if it isn't set.
As we were pretending that 406 was actually 405 (Moved) and tried to handle it as a
redirect this results in an infinite loop until Python kills the recursion.
Delete the handling of 406 as 405, and pass Accept: */* in the headers.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Having this as one huge long line isn't easy to manipulate, split it into
multiple lines for ease of debugging issues.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The checkstatus() code was expecting checkstatus to throw exceptions if it
failed, but in general it should return False.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
`git fetch --tags` seems to interact badly with `mirror=fetch`, resulting in
the regular branches not being fetched, so drop the unnecessary `--tags`. This
fixes this unit test failure: `bb.fetch2.FetchError: Fetcher failure: Unable
to resolve 'master' in upstream git repository in git ls-remote output for
/tmp/tmp4ag_mgmn/gitsource`
[YOCTO #11698]
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the server isn't running return 0 as to do otherwise complicates
scripts which do cleanup of bitbake servers which would potentially
be memory resident.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This timeout path was commonly hit due to errors starting the server. Now we
have a better way to handle that, the retry logic can be improved and cleaned
up. This patch:
* Makes the timeout 5s rather than intervals of 1s with a message. Paul
noted some commands can take around 1s to run on a server which has just
been started on a loaded system.
* Allows a broke connection to exit immediately rather than retrying something
which will never work.
* Drops the Ctrl+C masking, we shouldn't need that anymore and any issues
would be better handled in other ways.
This should make things clearer and less confusing for users and is much cleaner
code too.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If we reconnect to the server, stop leaking pipes and clean up
after ourselves.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently if the server fails to start, the user sees no error message and
the server will be repeatedly attempted to be started until some longer
timeouts expire. There are error messages in the cookerdeamon log but
nobody thinks to look there.
Add in a pipe which can be used to tell the starting process whether the cooker
did actually start or not. If it fails to start, no further attempts can be
made and if present, the log file can be shown to the user.
[YOCTO #11834]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This cleans up the socket keep alive into better class structured code
and adds cleanup of the open file descriptors upon shutdown.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently the monitoring thread exits with some error code or runs indefinitely. Allow
closure of the pipe its monitoring to have the thread exit cleanly/silently.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Expose the underlying close() and fileno() methods which allow connection
monitoring and cleanup.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This code would duplicate messages to stdout and stderr when no UI connected
and there were error level messages.
Rework the code so it either uses stderr (for errors and above) or
stdout for warnings/debug but not both for the same messages.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We were bridging the gap between the server and UI here by calling a
bb.siggen.find_siginfo, a function defined and set on that module from
the metadata. This worked from the UI side before but since the recent
server changes is no longer accessible. Create a new command so this can
execute on the server side and return the result by way of a new event.
(We're still running compare_sigfiles() on the signature generator but
that isn't quite the same thing and does still work.)
Fixes [YOCTO #11844].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Richard Purdie
Paul Eggleton
Jussi Kukkonen
Robert Yang
Ross Burton
Christopher Larson
Mark Hatle