| Age | Commit message (Collapse) | Author |
|---|
|
It turns out that progress information we can extract from a task is
rarely apportioned closely enough to the time taken for the ETA to be
accurate, so showing it is going to be misleading most of the time for
anything but the most basic of examples. Let's just remove it and avoid
misleading (or worse, annoying) the user.
Fixes [YOCTO #9986].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If you specify custom widgets then we don't want to assume where the
"extra" position is - you should have to specify it, and if it isn't
specified it shouldn't just wipe out the last widget or you can start to
see odd behaviour if you're modifying the code.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Store the path to the *.rootfs.manifest file for targets which
generate images.
A link to the package manifest is displayed in the build dashboard
for targets which produce image files.
Like the license manifest path, if a target would have produced
the package manifest (but didn't, because it already existed), that
path is copied from the target which did produce the package
manifest.
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: bavery <brian.avery@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If a target is built which is classified as an "image" target
(e.g. "core-image-minimal"), Toaster reads the list of files in
the image (from the files-in-image.txt file).
However, Toaster continues to do this for builds which don't
produce images, if the recipe providing the target is an
image recipe. This can result in a list of files in the image
being attached to a target which didn't produce an image (e.g.
rootfs).
When associating files with an image, ensure that only targets
with a task which produces an image have "files in the image"
associated with them.
[YOCTO #9784]
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: bavery <brian.avery@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
SDK artifacts were previously picked up by toaster.bbclass and
notified to buildinfohelper (via toasterui). The artifacts
were then added to the Build object, so that it wasn't clear
which artifact went with which target; we were also unable
to attach SDK artifacts to a Build if they had already been
attached to a previous build.
Now, toaster.bbclass just notifies the TOOLCHAIN_OUTPUTNAME when
a populate_sdk* target completes. The scan is moved to buildinfohelper,
where we search the SDK deploy directory for files matching
TOOLCHAIN_OUTPUTNAME and attach them to targets (not builds).
If an SDK file is not produced by a target, we now look for a
similar, previously-run target which did produce artifacts.
If there is one, we clone the SDK artifacts from that target
onto the current one.
This all means that we can show SDK artifacts by target, and should
always get artifacts associated with a target, regardless of whether
it really build them.
This requires an additional model, TargetSDKFile, which tracks
the size and path of SDK artifact files with respect to Target
objects.
[YOCTO #8556]
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: bavery <brian.avery@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When buildinfohelper records the targets for a build, it looks
up any existing targets for a build and creates them if they
are not present. This is because in the case of Toaster-triggered
builds, the Target objects have already been created (inside
triggerBuild()) and don't need to be recreated; but in the case
of cli builds, the Target objects have to be created by
buildinfohelper.
The issue is that the code for retrieving an existing target for
a build only looks for Targets with a matching target and build,
e.g. Targets for build X with target "core-image-minimal". But it
is perfectly legitimate to call bitbake with a command like
"bitbake core-image-minimal:do_populate_sdk
core-image-minimal:do_populate_sdk_ext". In such a case, the
code which looks for matching targets finds two objects, as it
doesn't filter by task.
Add the task into the filter for the Target so that only one
Target object is be returned. Note that a command
line like "bitbake recipe:task recipe:task" will still cause an
error as bitbake doesn't de-duplicate the command line arguments
and will run the recipe:task combination twice.
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: bavery <brian.avery@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The bzImage and modules files were previously attached to a build,
rather than to the target which produced them. This meant it was
not possible to determine which kernel artifact produced by a
build came from which target; which in turn made it difficult to
associate existing kernel artifact with targets when those
targets didn't produce artifacts (e.g. if the same machine + target
combination was built again and didn't produce a bzImage or modules
file because those files already existed).
By associating kernel artifacts with the target (via a new
TargetArtifactFile model), we make it possible to find all
the artifacts for a given machine + target combination. Then, in
cases where a build is completed but its targets don't produce
any artifacts, we can find a previous Target object with the same
machine + target and copy its artifacts to the targets for a
just-completed build.
Note that this doesn't cover SDK artifacts yet, which are still
retrieved in toaster.bbclass and show up as "Other artifacts",
lumped together for the whole build rather than by target.
[YOCTO #8556]
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: bavery <brian.avery@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Move the image and artifact scan code from toaster.bbclass and
consolidate its logic with the existing logic in buildinfohelper.
Remove handler setup for events which used to be fired from
toaster.bbclass but which are now handled directly by buildinfohelper.
[YOCTO #8556]
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: bavery <brian.avery@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In a few places we use the fetcher code to fetch files outside of a
task, for example uninative in OE. In that case the pid of the event is
0 and that was causing an error in BBUIHelper.eventHandler(). Check the
pid and do nothing if it's 0.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When using toaster-eventreplay to run a bitbake event file
through toasterui/buildinfohelper, errors occur when the
tasks are updated with buildstats info:
RuntimeWarning: DateTimeField Task.started received a naive
datetime (2016-07-06 09:15:22.070000) while time zone support
is active.
This is because a method in buildinfohelper returns a naive
datetime, but Django is expecting timezone-aware datetimes.
Ensure that datetimes used to set the started/ended times on
tasks are converted to timezone-aware datetimes.
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Mistakes can happen with the generation of the progress events, change
knotty to be more tolerant of this rather than crashing, reporting to the
user when something unexpected happens. I haven't debugged why multiple
finish events appear to be triggered.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Quiet output mode disables printing most messages (below warnings) to
the console; however these messages still go to the console log file.
This is primarily for cases where bitbake is being launched
interactively from some other process, but where full console output is
not needed.
Because of the need to keep logging all normal events to the console
log, this functionality was implemented within the knotty UI rather
than in bb.msg (where verbose mode is implemented). We don't currently
have a means of registering command line options from the UI end, thus
the option actually has to be registered in main.py regardless of the
UI, however I didn't feel like it was worth setting up such a mechanism
just for this option.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In addition to the "currently running n tasks (x of y)" message, show a
progress bar for another view on how much of the build is left. We have
to take care to reset it when moving from the scenequeue to the
runqueue, and explicitly don't include an ETA since not all tasks take
equal time and thus it isn't possible to estimate the time remaining
with the information available.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add support code on the BitBake side to allow sstate.bbclass in
OpenEmbedded to report progress when it is checking for availability of
artifacts from shared state mirrors.
Part of the implementation for [YOCTO #5853].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For long-running tasks where we have some output from the task that
gives us some idea of the progress of the task (such as a percentage
complete), provide the means to scrape the output for that progress
information and show it to the user in the default knotty terminal
output in the form of a progress bar. This is implemented using a new
TaskProgress event as well as some code we can insert to do output
scanning/filtering.
Any task can fire TaskProgress events; however, if you have a shell task
whose output you wish to scan for progress information, you just need to
set the "progress" varflag on the task. This can be set to:
* "percent" to just look for a number followed by a % sign
* "percent:<regex>" to specify your own regex matching a percentage
value (must have a single group which matches the percentage number)
* "outof:<regex>" to look for the specified regex matching x out of y
items completed (must have two groups - first group needs to be x,
second y).
We can potentially extend this in future but this should be a good
start.
Part of the implementation for [YOCTO #5383].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Since we're going to make some minor extensions to it, it makes sense to
bring in the latest version of python-progressbar. Its structure has
changed a little but the API hasn't; however we do need to ensure our
overridden _needs_update() function's signature in BBProgress() matches
properly.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If you're looking to find the latest console log repeatedly it can be a bit
tedious - let's just create a symlink just as we do with other logs to
make it easy to find.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The code is still a bit icky (and should be refactored to not use
Gdk.threads_enter/leave) but it should work about as reliably as
it did with Gtk+2.
Based on earlier patches by Maxin and Joshua.
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
First parameter of traceback.format_exc is a 'limit' - a number
of stracktraces to format.
Passing exception object to format_exc is incorrect, but it works in
Python 2 as this code from traceback module works:
while tb is not None and (limit is None or n < limit):
Comparing integer counter n with the exception object in Python 2
always results in True. However, in Python 3 it throws exception:
TypeError: unorderable types: int() < <Exception type>()
As format_exc is used in except block of handling another
exception this can cause hard to find and debug bugs.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Python 3 doesn't have dict.viewkeys method, renaming
to keys().
[YOCTO #9584]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
|
This commit causes buildinfohelper to crash when run on python 3
as python 3 doesn't have unicode builtin function.
This reverts commit 7a309d964a86f3474eaab7df6d438ed797f935c0.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The upgrade to python3 is the final nail in the coffin for image-writer
and the goggle UI. Neither seem used or recieve patches and are based
on old versions of GTK+ so drop them, and the remaining crumbs support
pieces.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Disable the problematic gtk usage for use with pygtkcompat. The following
commit removes these tools/UIs entirely but we may as well leave this
piece in the history in case anyone does want a starting point for reusing
them.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Various misc changes to convert bitbake to python3 which don't warrant
separation into separate commits.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We don't need to pass the DATABASE_URL around and read it back if we
setup the django framework in the correct way.
We make the default sqlite database path a full path so that the
database isn't being assumed to be in CWD.
Also add some more useful comments on the database settings.
This is preparation work to migrate the build tests and be able to
trigger builds on differently configured databases.
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We need to flush the footer removal, else it may not be outputted until
the buffer is flushed as part of StreamHandler and this would lead to
it removing the ERROR output just printed which is extremely confusing.
Also ensure the footer is cleared before printing a summary as in
some cases it wasn't being removed, also leading to user confusion.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
knotty captures two levels of keyboard interrupt: a single interrupt
or two interrupts in a row. These then trigger stateShutdown
and stateForceShutdown respectively.
toasterui doesn't have an equivalent way of capturing interrupts and
using them to shut down bitbake. Now that we are no longer using
knotty + XMLRPCServer for our command line builds (since switching to
per-project build directories), we see some odd side effects of this,
such as builds continuing after they have been interrupted on the
command line.
Bring toasterui in line with knotty (copy-paste most of the code
in knotty.py which deals with interrupts) so that a keyboard
interrupt actually shuts down the bitbake server (if not in
observe only mode).
Additionally use the cancel_cli_build() method to set the Build
status to CANCELLED in Toaster's db when we get keyboard interrupts.
This means that builds interrupted on the command line show as
cancelled (same as if they'd been cancelled from the Toaster UI),
as specified in the UI designs.
[YOCTO #8515]
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This will be used from toasterui to cancel the current command-line
build when a keyboard interrupt is captured.
[YOCTO #8515]
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Now the event is sent unconditionally we can drop this feature
as its no longer needed.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If we don't close the console log file handle, python prints a warning
about unclosed file handles upon exit which is annoying.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
python deprecated logger.warn() in favour of logger.warning(). This is only
used in bitbake code so we may as well just translate everything to avoid
warnings under python 3. Its safe for python 2.7.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Sometimes you can end up in a situation where you need to specify that
a specific runtime entity should be provided by a specific entry.
An example of this is bluez where you could end up in a situation where
for example:
NOTE: multiple providers are available for runtime libasound-module-bluez (bluez4, bluez5)
NOTE: consider defining a PREFERRED_PROVIDER entry to match libasound-module-bluez
NOTE: multiple providers are available for runtime bluez-hcidump (bluez-hcidump, bluez5)
NOTE: consider defining a PREFERRED_PROVIDER entry to match bluez-hcidump
The only option here is to set something like PREFERRED_PROVIDER_bluez4 = "bluez4"
which is clearly not very informative.
I've actually held off adding RPROVIDER support for a long while as this
does have sigificant potential for misuse. It doesn't for example allow
multiple runtime providers of the same name to coexist, that simply isn't
supported. It therefore doesn't replace some of the name mappings such
as busybox verses coreutils that OE-Core faces as that is a different
problem with different constraints. This mechanism is simply to provide
bitbake with a hint to decide what the dependency tree should look like.
Also, this allows us to stop printing a confusing message telling the user
to set PREFERRED_PROVIDER when the setting needed would be rather ambiguous.
[YOCTO #5044]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We now prefix log messages coming from worker task context with the
PF and task info, however parsing messages all have to be manually
prefixed which is ugly and error prone. This change modifies the log
handler filter so this happens automatically, meaning we don't have
to change every message to include that information. This makes error
messages longer but more usable.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We have been seeing UnicodeDecodeErrors when handling the
ImagePkgList MetadataEvent in ORMWrapper's
save_target_file_information() if the event includes filenames
that include non-ASCII characters.
In the short term work around this by converting paths to the
unicode type when passing them to Django's ORM. This is a bit of
a hack but it's too late in the cycle to do anything more invasive.
[YOCTO #9142]
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
buildinfohelper stores current Build object in its internal
state. Any changes to Build object will be lost if internal
state is not updated as current buildinfohelper code
saves Build object from internal state when build is
completed.
This bug causes incorrect build state when build is cancelled.
Updating internal state should fix it.
Note, that this commit updates internal state after status of
the build is changed to Build.CANCELLED. There are several other
places in the code where Build object is updated without updating
internal state. They should be carefully analyzed and fixed.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When bitbake doesn't need to build anything it still sends
ImagePkgList event with empty 'pkgdata', 'imgdata' and 'filedata'
fields. This causes crash in buildinfohelper code as it's assumed
that above mentioned fields always have data keyed by build target:
ERROR: u'core-image-minimal'
Traceback (most recent call last):
File "toasterui.py", line 423, in main
buildinfohelper.store_target_package_data(event)
File "buildinfohelper.py", line 1218, in store_target_package_data
imgdata = BuildInfoHelper._get_data_from_event(event)['imgdata'][target.target]
KeyError: u'core-image-minimal'
Fixed this by using dict.get method with empty dictionary as default
return value instead of trying to get value without checking if target
key is in the data.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When a build is cancelled the build (action) is complete if it has been
caused the request being cancelled then update the build outcome
accordingly.
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
toasterui exits event loop on one of the following events:
CommandCompleted, CommandFailed or CommandExit.
Unfortunately none of them come from bitbake when build fails.
This is normai if toasterui runs in observer mode. However, if it's
in build mode this causes toasterui to stuck in the infinite loop
waiting for new events.
The only event we can rely on is BuildCompleted as it always
comes from bitbake unlike 3 above mentioned events.
Modified the code to always shutdown toasterui in build mode
on BuildCompleted event.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The keys 'started', 'ended', 'cpu_time_user', 'disk_io_read' and
'disk_io_write' were added to the event recently, so they don't
exist in the events generated by bitbake server from older releases.
Checking if task_to_update structure has these keys before using
them should fix build of older releases.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
buildinfohelper.brbe is lost when buildinfohelper is closed.
This causes incorrect report of brbe when build is done.
Saved brbe attribute before closing buildinfohelper and used
it to report correct brbe.
Got rid of useless and confusing 'ToasterUI build done 1'
log message.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
DepTreeGenerated event doesn't contain 'providermap' data in jethro.
Modified buildinfohelper to handle events without this data. This
should make it possible to handle jethro events coming from jethro
bitbake server by the latest buildinfohelper.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Return value of self.BBServer.registerEventHandler differs between
jethro and master. To be able to build jethro toaster should be
able to communicate with jethro bitbake server i.e. it must work
with both old and new registerEventHandler call.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In current toaster code BRBE(build request:build environment) value
is passed from toaster to buildinfohelper through the 'SetBRBE' event.
Passing it through environment variable is easier as it doesn't
involve rpc communication between toaster and bitbake server.
It also eliminates the need in running bitbake observer process.
Added parameter 'brbe' to BuildInfoHelper.__init__
Used environment variable TOASTER_BRBE to set brbe for
buildinfohelper object.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add additional metadata to the layer created for build history to be
able to identify the layer and recipe later on. Specifically this is the
branch and release to which the recipe and layer are associated with
enabling differentiation of two recipes which are local release and
master and 'master' release.
[YOCTO #8528]
[YOCTO #8545]
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
bb.event.ParseStarted event is not processed by toasterui, but
present in event list. This causes the following error:
WARNING: Unknown event: <bb.event.ParseStarted object at ...
and non-zero return code:
WARNING: Return value is 1
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove the very verbose log dump from toasterui. This generates several
megabytes of not that useful debug information and actually hinders
finding the original exception.
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use a constant to define the name for the toaster custom images layer;
this constant is then used to identify this layer in various places.
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The data available from buildstats is now more fine grained than
previously, so take advantage of that to enrich the data we save
against tasks:
* Store the CPU usage for user and system separately, and display
them separately.
* Disk IO is now measured in bytes, not ms. Also store the
read/write bytes separately.
* Store started and ended times, as well as elapsed_time. This
will enable future features such as showing which tasks were
running at a particular point in the build.
There was also a problem with how we were looking up the Task
object, which meant that the buildstats were being added to
new tasks which weren't correctly associated with the build. Fix
how we look up the Task (only looking for tasks which match the
build, and the task and recipe names in the build stats data) so
the build stats are associated with the correct task.
[YOCTO #8842]
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Continue after processing BuildStarted event to fix
WARNING: Unknown event: <bb.event.BuildStarted object at 0x2554150>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Toasterui exits only if bitbake observer shuts down.
In build mode it should exit when build is done.
Made toasterui exit on bb.command.CommandCompleted,
bb.command.CommandFailed and bb.command.CommandExit events
when it's running in build mode.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Paul Eggleton
Elliot Smith
Richard Purdie
Jussi Kukkonen
Ed Bartosh
Ed Bartosh
Michael Wood
Joshua Lock