blob: b94f58c7cb5d25f605f8f01a41b81d9cdeafc81b (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
|
From 40049e97a5a97d597f8754ff1b39d931053eb465 Mon Sep 17 00:00:00 2001
From: Jason Kridner <jkridner@beagleboard.org>
Date: Wed, 19 May 2010 05:14:43 -0500
Subject: [PATCH 44/50] BeagleBoard: Enabled LEDs
Added LED driver using status_led. USR0 is set to monitor the boot
status. USR1 is set to be the GREEN LED.
Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
---
include/configs/omap3_beagle.h | 13 +++++++++++++
1 files changed, 13 insertions(+), 0 deletions(-)
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index e4c88f2..053f5df 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -98,6 +98,18 @@
#define CONFIG_SYS_MMC_SET_DEV 1
#define CONFIG_DOS_PARTITION 1
+/* Status LED */
+#define CONFIG_STATUS_LED 1
+#define CONFIG_BOARD_SPECIFIC_LED 1
+#define STATUS_LED_BIT 0x01
+#define STATUS_LED_STATE STATUS_LED_ON
+#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
+#define STATUS_LED_BIT1 0x02
+#define STATUS_LED_STATE1 STATUS_LED_ON
+#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2)
+#define STATUS_LED_BOOT STATUS_LED_BIT
+#define STATUS_LED_GREEN STATUS_LED_BIT1
+
/* DDR - I use Micron DDR */
#define CONFIG_OMAP3_MICRON_DDR 1
@@ -138,6 +150,7 @@
#define CONFIG_CMD_I2C /* I2C serial bus support */
#define CONFIG_CMD_MMC /* MMC support */
#define CONFIG_CMD_NAND /* NAND support */
+#define CONFIG_CMD_LED /* LED support */
#define CONFIG_VIDEO_OMAP3 /* DSS Support */
#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
--
1.6.6.1
|