blob: 4cfcfe15b11fd95ae318afffba6196948308c58f (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
|
From 9a5d5518c3d3844cc49cf2d9ef5aeabca1e87c30 Mon Sep 17 00:00:00 2001
From: Jason Kridner <jkridner@beagleboard.org>
Date: Wed, 5 May 2010 14:53:49 -0500
Subject: [PATCH 38/38] Added configurations for xM Rev A board
This defaults to "on" condition for USB and DVI. May want to revise for
power savings.
---
board/ti/beagle/beagle.h | 4 ++++
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h
index 7774855..cb7fd1c 100644
--- a/board/ti/beagle/beagle.h
+++ b/board/ti/beagle/beagle.h
@@ -389,6 +389,10 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) /*UART2_TX*/
#define MUX_BEAGLE_XM() \
+ MUX_VAL(CP(GPMC_NCS5), (IDIS | PTD | EN | M4)) /*GPIO_56 - USB HUB reset*/\
+ MUX_VAL(CP(GPMC_WAIT0), (IDIS | PTU | EN | M4)) /*GPIO_63 - P8 USB HUB nreset*/\
+ MUX_VAL(CP(MMC1_DAT7), (IDIS | PTU | EN | M4)) /*GPIO_129 - DVI enable*/\
+ MUX_VAL(CP(HDQ_SIO), (IDIS | PTU | EN | M4)) /*GPIO_170 - P8 DVI enable*/\
MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M4)) /*GPIO_140*/\
MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M4)) /*GPIO_142*/\
MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M4)) /*GPIO_141*/\
--
1.6.6.1
|
