Index: linux-2.6.14/arch/arm/mach-s3c2410/mach-n30.c
===================================================================
--- linux-2.6.14.orig/arch/arm/mach-s3c2410/mach-n30.c
+++ linux-2.6.14/arch/arm/mach-s3c2410/mach-n30.c
@@ -52,6 +52,7 @@
 #include <asm/arch/regs-gpio.h>
 #include <asm/arch/regs-lcd.h>
 #include <asm/arch/regs-timer.h>
+#include <asm/arch/regs-spi.h>
 #include <asm/arch/irqs.h>
 #include <asm/arch/iic.h>
 #include <asm/arch/fb.h>
@@ -372,6 +373,7 @@ static struct platform_device *n30_devic
 	&s3c_device_usbgadget,
 	&s3c_device_sdi,
 	&s3c_device_nand,
+	&s3c_device_spi1,
 };
 
 static struct s3c2410_platform_i2c n30_i2ccfg = {
@@ -712,6 +714,90 @@ static int n30_usbstart_thread(void *unu
 	return 0;
 }
 
+static int spi_thread(void *regs)
+{
+	unsigned sptdat1 = ~0, sprdat1 = ~0, spsta1 = ~0;
+	unsigned value;
+
+	writel(0x01, regs + S3C2410_SPCON);
+	writel(0x02, regs + S3C2410_SPPIN);
+
+	s3c2410_gpio_cfgpin(S3C2410_GPG6, S3C2410_GPG6_SPIMOSI1);
+	s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPG7_SPICLK1);
+
+	s3c2410_gpio_cfgpin(S3C2410_GPG3, 0x3 << 6);
+
+	printk("GPGCON=0x%x\n", readl(S3C2410_GPGCON));
+
+	msleep(10);
+
+	while (1) {
+		value = readl(regs + S3C2410_SPTDAT);
+		if (sptdat1 != value) {
+			printk(KERN_INFO "SPTDAT1=0x%x\n", value);
+			sptdat1 = value;
+		}
+		value = readl(regs + S3C2410_SPRDAT);
+		if (sprdat1 != value) {
+			printk(KERN_INFO "SPRDAT1=0x%x\n", value);
+			sprdat1 = value;
+		}
+		value = readl(regs + S3C2410_SPSTA);
+		if (spsta1 != value) {
+			printk(KERN_INFO "SPSTA1=0x%x\n", value);
+			spsta1 = value;
+		}
+
+		msleep(10);
+	}
+}
+
+static int s3c24xx_spi_probe(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct resource *res;
+	int ret;
+	void *regs;
+	struct resource		*ioarea;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(dev, "cannot find IO resource\n");
+		ret = -ENOENT;
+		goto out;
+	}
+
+	ioarea = request_mem_region(res->start, (res->end-res->start)+1,
+					 pdev->name);
+	if (ioarea == NULL) {
+		dev_err(dev, "cannot request IO\n");
+		ret = -ENXIO;
+		goto out;
+	}
+
+	regs = ioremap(res->start, (res->end-res->start)+1);
+	if (regs == NULL) {
+		dev_err(dev, "cannot map IO\n");
+		ret = -ENXIO;
+		goto out;
+	}
+
+	dev_info(dev, "registers %p (%p, %p)\n", regs, ioarea, res);
+
+	kthread_run(spi_thread, regs, "spi_debug");
+
+	ret = 0;
+
+ out:
+	return ret;
+}
+
+static struct device_driver s3c24xx_spi_driver = {
+	.name		= "s3c2410-spi",
+	.bus		= &platform_bus_type,
+	.probe		= s3c24xx_spi_probe,
+};
+
 #ifdef CONFIG_APM
 static void n30_get_power_status(struct apm_power_info *info)
 {
@@ -764,6 +850,9 @@ static void __init n30_init(void)
 	memcpy_toio(N30_RESUME_VA, (void *)n30_resume,
 		    &n30_resume_end - (void *)n30_resume);
 
+	if (driver_register(&s3c24xx_spi_driver) < 0)
+		printk(KERN_ERR "failed to register spi driver\n");
+
 	/* Clear any locks and write protects on the flash. */
 	s3c2410_gpio_setpin(S3C2410_GPC5, 1);
 	msleep(1);