DESCRIPTION = "Codec Engine for TI ARM/DSP processors" DEPENDS = "virtual/kernel perl-native" RDEPENDS = "update-modules" INSANE_SKIP_ti-codec-engine-apps = True INSANE_SKIP_ti-dsplink-apps = True INSANE_SKIP_${PN} = True inherit module # disable this package for now, while we're in test mode DEFAULT_PREFERENCE = "-1" # tconf from xdctools dislikes '.' in pwd :/ PV = "223" # Get CE tarball from TI website, place in sources and calculate md5sum # Look for tarball at https://www-a.ti.com/downloads/sds_support/targetcontent/CE/index.html SRC_URI = "http://install.tarball.in.source.dir/codec_engine_2_23.tar.gz \ file://loadmodules-ti-dsplink-apps.sh \ file://unloadmodules-ti-dsplink-apps.sh \ file://loadmodules-ti-codec-engine-apps.sh \ file://unloadmodules-ti-codec-engine-apps.sh \ " S = "${WORKDIR}/codec_engine_2_23" ########### # To build the DSP applications you need to have DSP/BIOS, xdctools and codegen installed. Get these from: # TODO - update to bios 5.33.04.... (which is what CE was validated against) # https://www-a.ti.com/downloads/sds_support/targetcontent/bios/bios_5_33/bios_5_33_02/exports/bios_setuplinux_5_33_02.bin # https://www-a.ti.com/downloads/sds_support/targetcontent/rtsc/xdctools_3_10_03/exports/xdctools_setuplinux_3_10_03.bin # https://www-a.ti.com/downloads/sds_support/targetcontent/LinuxDspTools/download.html # Back link for above: # https://www-a.ti.com/downloads/sds_support/targetcontent/index.html # Path to the dir where the TI tools are unpacked TITOOLSDIR ?= "/OE/TI" TIBIOSDIR ?= "${TITOOLSDIR}/bios_5_33_02" TIXDCTOOLSDIR ?= "${TITOOLSDIR}/xdctools_3_10_03" TICGTOOLSDIR ?= "${TITOOLSDIR}/cg6x_6_0_16" # CODEC ENGINE - This tells codec engine which targets to build CEEXAMPLESDEVICES ?= "DM6446" CEEXAMPLESDEVICES_omap5912osk = "fixme-ti-paths.inc" CEEXAMPLESDEVICES_armv7a = "OMAP3530" CEEXAMPLESDEVICES_omap3evm = "OMAP3530" CEEXAMPLESDEVICES_beagleboard = "OMAP3530" CEEXAMPLESDEVICES_davinci-sffsdr = "DM6446" CEEXAMPLESDEVICES_davinci-dvevm = "DM6446" # DSPLINK - Config Variable for different platform DSPLINKPLATFORM ?= "DAVINCI" DSPLINKPLATFORM_omap5912osk = "OMAP" DSPLINKPLATFORM_armv7a = "OMAP3530" DSPLINKPLATFORM_beagleboard = "OMAP3530" DSPLINKPLATFORM_omap3evm = "OMAP3530" DSPLINKPLATFORM_davinci-sffsdr = "DAVINCI" DSPLINKPLATFORM_davinci-dvevm = "DAVINCI" DSPLINKDSPCFG ?= "DM6446GEMSHMEM" DSPLINKDSPCFG_armv7a ?= "OMAP3530SHMEM" DSPLINKDSPCFG_beagleboard ?= "OMAP3530SHMEM" DSPLINKDSPCFG_omap3evm ?= "OMAP3530SHMEM" DSPLINKGPPOS ?= "MVL5G" DSPLINKGPPOS_armv7a = "OMAPLSP" DSPLINKGPPOS_beagleboard = "OMAPLSP" DSPLINKGPPOS_omap3evm = "OMAPLSP" # LPM LPMDSPPOWERSOC ?= "dm6446" LPMDSPPOWERSOC_armv7a = "omap3530" LPMDSPPOWERSOC_beagleboard = "omap3530" LPMDSPPOWERSOC_omap3evm = "omap3530" ############ export DSPLINK="${S}/cetools/packages/dsplink" PARALLEL_MAKE = "" do_configure () { # Clean up stale binaries find ${S} -name "*.ko" -exec rm {} \; || true find ${S} -name "*.o" -exec rm {} \; || true # Run perl script to create appropriate makefiles (v1.60 and up) ( cd ${DSPLINK} perl config/bin/dsplinkcfg.pl --platform=${DSPLINKPLATFORM} --nodsp=1 --dspcfg_0=${DSPLINKDSPCFG} --dspos_0=DSPBIOS5XX --gppos=${DSPLINKGPPOS} --comps=ponslrm ) } do_compile () { unset DISPLAY # DSPLINK # TODO :: KERNEL_CC, etc need replacing with user CC # TODO :: Need to understand why OBJDUMP is required for kernel module # Unset these since LDFLAGS gets picked up and used incorrectly.... need investigation unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS # Build the gpp user space library cd ${DSPLINK}/gpp/src/api make \ CROSS_COMPILE="${TARGET_PREFIX}" \ CC="${KERNEL_CC}" \ AR="${KERNEL_AR}" \ LD="${KERNEL_LD}" \ COMPILER="${KERNEL_CC}" \ ARCHIVER="${KERNEL_AR}" \ KERNEL_DIR="${STAGING_KERNEL_DIR}" \ clean all # Build the gpp kernel space (debug and release) cd ${DSPLINK}/gpp/src make \ OBJDUMP="${TARGET_PREFIX}objdump" \ CROSS_COMPILE="${TARGET_PREFIX}" \ CC="${KERNEL_CC}" \ AR="${KERNEL_AR}" \ LD="${KERNEL_LD}" \ COMPILER="${KERNEL_CC}" \ ARCHIVER="${KERNEL_AR}" \ KERNEL_DIR="${STAGING_KERNEL_DIR}" \ clean all # Build the gpp samples cd ${DSPLINK}/gpp/src/samples make \ BASE_TOOLCHAIN="${CROSS_DIR}" \ BASE_CGTOOLS="${BASE_TOOLCHAIN}/bin" \ OSINC_PLATFORM="${CROSS_DIR}/lib/gcc/${TARGET_SYS}/$(${TARGET_PREFIX}gcc -dumpversion)/include" \ OSINC_TARGET="${BASE_TOOLCHAIN}/target/usr/include" \ CROSS_COMPILE="${TARGET_PREFIX}" \ CC="${KERNEL_CC}" \ AR="${KERNEL_AR}" \ LD="${KERNEL_LD}" \ COMPILER="${KERNEL_CC}" \ LINKER="${KERNEL_CC}" \ ARCHIVER="${KERNEL_AR}" \ KERNEL_DIR="${STAGING_KERNEL_DIR}" \ clean all # Build the dsp library (debug and release) cd ${DSPLINK}/dsp/src make \ BASE_CGTOOLS="${TICGTOOLSDIR}" \ BASE_SABIOS="${TIBIOSDIR}" \ clean all # Build the dsp samples (debug and release) cd ${DSPLINK}/dsp/src/samples make \ BASE_CGTOOLS="${TICGTOOLSDIR}" \ BASE_SABIOS="${TIBIOSDIR}" \ clean all # LPM - Build the DSP power manager kernel module cd ${S}/cetools/packages/ti/bios/power/modules/${LPMDSPPOWERSOC}/lpm make \ DSPLINK_REPO="${DSPLINK}/.." \ LINUXKERNEL_INSTALL_DIR="${STAGING_KERNEL_DIR}" \ MVTOOL_PREFIX="${TARGET_PREFIX}" \ .clean default # CMEM - Build the cmem kernel module and associated test apps # TODO - Still need to clean up UCTOOLs - don't really want to build UC here - it's not good to just build with MVTOOLS (GLIBC) # - note target default, doesn't get passed through to underlying makefiles cd ${S}/cetools/packages/ti/sdo/linuxutils/cmem make \ LINUXKERNEL_INSTALL_DIR="${STAGING_KERNEL_DIR}" \ MVTOOL_PREFIX="${TARGET_PREFIX}" \ UCTOOL_PREFIX="${TARGET_PREFIX}" \ clean debug release # SDMA - Build the sdma module cd ${S}/cetools/packages/ti/sdo/linuxutils/sdma make \ LINUXKERNEL_INSTALL_DIR="${STAGING_KERNEL_DIR}" \ MVTOOL_PREFIX="${TARGET_PREFIX}" \ UCTOOL_PREFIX="${TARGET_PREFIX}" \ clean debug release # TODO - add other modules here, like IRQ, etc for DM6446/DM355/etc # CE - EXAMPLES # Now build the CE examples cd ${S}/examples # Fix paths to arm crosstools, c6x codegen and x86 gcc # Also disable uclibc and x86 builds # Nasty replacement of 674x build - hard to sed this, since 2 entries similar, hence uses leading spaces... sed -i \ -e s:/db/toolsrc/library/tools/vendors/cs/arm/arm-2007q3:${CROSS_DIR}:g \ -e s:/db/toolsrc/library/tools/vendors/ti/c6x/6.0.16/Linux:${TICGTOOLSDIR}:g \ -e s:/db/toolsrc/library/tools/vendors/opensource/gcc/4.1.0/Linux/gcc-4.1.0-glibc-2.3.6/i686-unknown-linux-gnu:/usr:g \ -e s:arm-none-linux-gnueabi-:${TARGET_PREFIX}:g \ -e 's:true, // build for uC Linux:false,:g' \ -e 's:true, // build for PC Linux:false,:g' \ -e 's: {doBuild\: true, // DSP builds: {doBuild\: false, // DSP builds:g' \ ${S}/examples/user.bld # For now, remove all targets, except omap3530 - nasty way to configure targets... sed -i \ -e '/evmDM357/d' \ -e '/evmDM6446/d' \ -e '/evmDM6467/d' \ -e '/evmDM355/d' \ -e '/evmDM6437/d' \ -e '/evmDM648/d' \ -e '/evmDM365/d' \ -e '/evmOMAPL137/d' \ -e '/sdp3430/d' \ -e '/evm2530/d' \ ${S}/examples/user.bld # Start building the CE examples: codecs, extensions, servers (codec bundles) and ARM side apps # TODO : Make clean doesn't do what you'd expect, it only cleans stuff you've enabled, so some cruft remains # TODO : Figure out how to pass PRODUCTS=... or alternative method, so that we don't build the 'local' versions for i in codecs extensions servers apps ; do make \ DEVICES="${CEEXAMPLESDEVICES}" \ CE_INSTALL_DIR="${S}" \ XDC_INSTALL_DIR="${TIXDCTOOLSDIR}" \ BIOS_INSTALL_DIR="${TIBIOSDIR}" \ CC_V5T="bin/${TARGET_PREFIX}gcc" \ CGTOOLS_V5T="${CROSS_DIR}" \ CGTOOLS_C64P="${TICGTOOLSDIR}" \ -C ${S}/examples/ti/sdo/ce/examples/$i \ clean #all done } do_install () { # DSPLINK driver - kernel module install -d ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/dsp cp ${DSPLINK}/gpp/export/BIN/Linux/${DSPLINKPLATFORM}/RELEASE/dsplinkk.ko ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/dsp/ # DSPLINK library install -d ${D}/${libdir} install -m 0755 ${DSPLINK}/gpp/export/BIN/Linux/${DSPLINKPLATFORM}/RELEASE/dsplink.lib ${D}/${libdir} # DSPLINK sample apps install -d ${D}/${datadir}/ti-dsplink install ${DSPLINK}/gpp/export/BIN/Linux/${DSPLINKPLATFORM}/RELEASE/*gpp ${D}/${datadir}/ti-dsplink || true for i in $(find ${DSPLINK}/dsp/BUILD/ -name "*.out") ; do install ${i} ${D}/${datadir}/ti-dsplink done # DSPLINK test app module un/load scripts install ${WORKDIR}/loadmodules-ti-dsplink-apps.sh ${D}/${datadir}/ti-dsplink install ${WORKDIR}/unloadmodules-ti-dsplink-apps.sh ${D}/${datadir}/ti-dsplink # LPM/CMEM/SDMA drivers - kernel modules install -d ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/dsp cp ${S}/cetools/packages/ti/bios/power/modules/${LPMDSPPOWERSOC}/lpm/*.ko ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/dsp || true cp ${S}/cetools/packages/ti/sdo/linuxutils/cmem/src/module/cmemk.ko ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/dsp || true cp ${S}/cetools/packages/ti/sdo/linuxutils/sdma/src/module/sdmak.ko ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/dsp || true # CE sample apps - this is very 64x / v5T specific at the moment - we really need CE to give us this list... install -d ${D}/${datadir}/ti-codec-engine # we change pwd so that find gives us relative path to the files, which we use to create the same structure on the target cd ${S}/examples/ti/sdo/ce # first find all the app files named '.out' for i in $(find . -name "*.out") ; do # first create the directory install -d ${D}/${datadir}/ti-codec-engine/`dirname ${i}` # now copy the file install ${i} ${D}/${datadir}/ti-codec-engine/`dirname ${i}` done # next find all the app files named '.xv5T' for i in $(find . -name "*.xv5T") ; do # first create the directory install -d ${D}/${datadir}/ti-codec-engine/`dirname ${i}` # now copy the file install ${i} ${D}/${datadir}/ti-codec-engine/`dirname ${i}` done # then find all the app/server files named '.x64P' for i in $(find . -name "*.x64P") ; do # first create the directory install -d ${D}/${datadir}/ti-codec-engine/`dirname ${i}` # now copy the file install ${i} ${D}/${datadir}/ti-codec-engine/`dirname ${i}` done # finally find all the app files named '.dat' for i in $(find . -name "*.dat") ; do # first create the directory install -d ${D}/${datadir}/ti-codec-engine/`dirname ${i}` # now copy the file install ${i} ${D}/${datadir}/ti-codec-engine/`dirname ${i}` done # CE test app module un/load scripts install ${WORKDIR}/loadmodules-ti-codec-engine-apps.sh ${D}/${datadir}/ti-codec-engine install ${WORKDIR}/unloadmodules-ti-codec-engine-apps.sh ${D}/${datadir}/ti-codec-engine # we should install the CMEM apps as well here # - TODO... # finally, strip targets that we're not supporting here # - TODO... } # Codec Engine and friends need a complete tree, so stage it all - possibly could use repoman for this later do_stage() { install -d ${STAGING_DIR}/${MULTIMACH_TARGET_SYS}/${PN} cp -pPrf ${S}/* ${STAGING_DIR}/${MULTIMACH_TARGET_SYS}/${PN}/ } PACKAGES =+ "ti-dsplink-module ti-dsplink-apps" PACKAGES =+ "ti-lpm-module ti-cmem-module ti-sdma-module ti-codec-engine-apps" FILES_ti-dsplink-module = "/lib/modules/${KERNEL_VERSION}/kernel/drivers/dsp/dsplinkk.ko" FILES_ti-dsplink-apps = "${datadir}/ti-dsplink/* ${libdir}/dsplink.lib" FILES_ti-lpm-module = "/lib/modules/${KERNEL_VERSION}/kernel/drivers/dsp/*lpm*ko" FILES_ti-cmem-module = "/lib/modules/${KERNEL_VERSION}/kernel/drivers/dsp/cmemk.ko" FILES_ti-sdma-module = "/lib/modules/${KERNEL_VERSION}/kernel/drivers/dsp/sdmak.ko" FILES_ti-codec-engine-apps = "${datadir}/ti-codec-engine/*" pkg_postinst_ti-dsplink-module () { if [ -n "$D" ]; then exit 1 fi depmod -a update-modules || true } pkg_postrm_ti-dsplink-module () { update-modules || true } pkg_postinst_ti-lpm-module () { if [ -n "$D" ]; then exit 1 fi depmod -a update-modules || true } pkg_postrm_ti-lpm-module () { update-modules || true } pkg_postinst_ti-cmem-module () { if [ -n "$D" ]; then exit 1 fi depmod -a update-modules || true } pkg_postrm_ti-cmem-module () { update-modules || true } pkg_postinst_ti-sdma-module () { if [ -n "$D" ]; then exit 1 fi depmod -a update-modules || true } pkg_postrm_ti-sdma-module () { update-modules || true } INHIBIT_PACKAGE_STRIP = "1" PACKAGE_ARCH = "${MACHINE_ARCH}" #legacy upgrade helpers RPROVIDES_ti-dsplink-module += "dsplink-module" RREPLACES_ti-dsplink-module += "dsplink-module" RPROVIDES_ti-dsplink-apps += "dsplink-apps" RREPLACES_ti_dsplink-apps += "dsplink-apps" RPROVIDES_ti-cmem-module += "ti-cmemk-module" RREPLACES_ti-cmem-module += "ti-cmemk-module" #run-time dependencies - note for kernel module we can only use RRECOMMENDS, since modules might be built into the kernel #and dependence on recipe version, so that we ensure apps and modules stay syncd RRECOMMENDS_ti-dsplink-apps += "ti-dsplink-module (>= ${PV}-${PR})" RRECOMMENDS_ti-codec-engine-apps += "ti-dsplink-module (>= ${PV}-${PR}) ti-lpm-module (>= ${PV}-${PR}) ti-cmem-module (>= ${PV}-${PR}) ti-sdma-module (>= ${PV}-${PR})"