From d70dc036b73dd71332e5ff662280bbd8f3401c3b Mon Sep 17 00:00:00 2001 From: Stefan Schmidt Date: Tue, 7 Sep 2010 13:07:25 +0200 Subject: netbase: Add interface file for imote2 and bump PR We need to set 'auto usb0' here to avoid some random kernel oops when trying to to gadget_ethernet. --- recipes/netbase/netbase/imote2/interfaces | 84 +++++++++++++++++++++++++++++++ 1 file changed, 84 insertions(+) create mode 100644 recipes/netbase/netbase/imote2/interfaces (limited to 'recipes/netbase/netbase') diff --git a/recipes/netbase/netbase/imote2/interfaces b/recipes/netbase/netbase/imote2/interfaces new file mode 100644 index 0000000000..74de5016bc --- /dev/null +++ b/recipes/netbase/netbase/imote2/interfaces @@ -0,0 +1,84 @@ +# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8) + +# The loopback interface +auto lo +iface lo inet loopback + + +# Wireless interfaces +# +# Example of an unencrypted (no WEP or WPA) wireless connection +# that connects to any available access point: +# +iface wlan0 inet dhcp + wireless_mode managed + wireless_essid any +# +# +# Same as above but locked to a specific access point: +# +#iface wlan0 inet dhcp +# wireless_mode managed +# wireless-essid some-essid +# +# A WEP encrypted connection locked to a specific access point: +# +#iface wlan0 inet dhcp +# wireless-essid some-essid +# wireless-key s:My-PlainText-Password +# wireless-mode managed +# +# A WPA1 or WPA2 encrypted connection locked to a specific access point. +# This is the best option for non-roaming, single-network usage. +# Note that your card may require a firmware update to use WPA. +# Some distributions install a temporary volatile firmware update on ifup. +# +#iface wlan0 inet dhcp +# wpa-essid some-essid +# wpa-psk My-PlainText-Password +# +# A WPA1 or WPA2 encrypted connection using an external configuration file +# for wpa-supplicant. This is the way to go if you need to configure multiple +# networks with different keys and / or WPA settings and roaming support. +# +# iface wlan0 inet dhcp +# wpa-conf /etc/wpa_supplicant.conf +# wpa-driver hostap + + + +iface atml0 inet dhcp + +# Wired or wireless interfaces +auto eth0 +iface eth0 inet dhcp +iface eth1 inet dhcp + +# Ethernet/RNDIS gadget (g_ether) +# ... or on host side, usbnet and random hwaddr +auto usb0 +iface usb0 inet static + address 192.168.0.202 + netmask 255.255.255.0 + network 192.168.0.0 + gateway 192.168.0.200 + + +# Zaurus 2.4 Lineo net_fd; obsolete +iface usbd0 inet static + address 192.168.129.201 + netmask 255.255.255.0 + network 192.168.129.0 + gateway 192.168.129.200 + +# iPAQ 2.4 mach-sa1100/usb-eth +# (192.168.0.202 is the iPAQ's IP, 192.168.0.200 is the host's IP) +iface usbf inet static + address 192.168.0.202 + netmask 255.255.255.0 + network 192.168.0.0 + gateway 192.168.0.200 + +# Bluetooth networking +iface bnep0 inet dhcp + -- cgit 1.2.3-korg