From 1d79a159550d59d7bbf64a1f04e9acfc1c20efda Mon Sep 17 00:00:00 2001 From: Oyvind Repvik Date: Sat, 10 Mar 2007 00:39:09 +0000 Subject: openturbostation: Remove leftover cruft --- .../initscripts-1.0/foonas/.mtn2git_empty | 0 .../initscripts-1.0/foonas/checkroot.sh | 212 +++++++++++++++++++++ .../initscripts/initscripts-1.0/foonas/devices | 70 +++++++ .../initscripts-1.0/foonas/domainname.sh | 5 + packages/initscripts/initscripts-1.0/foonas/halt | 27 +++ packages/initscripts/initscripts-1.0/foonas/reboot | 12 ++ .../openturbostation/.mtn2git_empty | 0 .../initscripts-1.0/openturbostation/checkroot.sh | 212 --------------------- .../initscripts-1.0/openturbostation/devices | 70 ------- .../initscripts-1.0/openturbostation/domainname.sh | 5 - .../initscripts-1.0/openturbostation/halt | 27 --- .../initscripts-1.0/openturbostation/reboot | 12 -- .../initscripts-openturbostation_1.0.bb | 174 ----------------- 13 files changed, 326 insertions(+), 500 deletions(-) create mode 100644 packages/initscripts/initscripts-1.0/foonas/.mtn2git_empty create mode 100755 packages/initscripts/initscripts-1.0/foonas/checkroot.sh create mode 100755 packages/initscripts/initscripts-1.0/foonas/devices create mode 100644 packages/initscripts/initscripts-1.0/foonas/domainname.sh create mode 100755 packages/initscripts/initscripts-1.0/foonas/halt create mode 100755 packages/initscripts/initscripts-1.0/foonas/reboot delete mode 100644 packages/initscripts/initscripts-1.0/openturbostation/.mtn2git_empty delete mode 100755 packages/initscripts/initscripts-1.0/openturbostation/checkroot.sh delete mode 100755 packages/initscripts/initscripts-1.0/openturbostation/devices delete mode 100644 packages/initscripts/initscripts-1.0/openturbostation/domainname.sh delete mode 100755 packages/initscripts/initscripts-1.0/openturbostation/halt delete mode 100755 packages/initscripts/initscripts-1.0/openturbostation/reboot delete mode 100644 packages/initscripts/initscripts-openturbostation_1.0.bb (limited to 'packages/initscripts') diff --git a/packages/initscripts/initscripts-1.0/foonas/.mtn2git_empty b/packages/initscripts/initscripts-1.0/foonas/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 diff --git a/packages/initscripts/initscripts-1.0/foonas/checkroot.sh b/packages/initscripts/initscripts-1.0/foonas/checkroot.sh new file mode 100755 index 0000000000..c69a773482 --- /dev/null +++ b/packages/initscripts/initscripts-1.0/foonas/checkroot.sh @@ -0,0 +1,212 @@ +# +# checkroot.sh Check to root filesystem. +# +# Version: @(#)checkroot.sh 2.84 25-Jan-2002 miquels@cistron.nl +# + +. /etc/default/rcS + +# +# Set SULOGIN in /etc/default/rcS to yes if you want a sulogin to be spawned +# from this script *before anything else* with a timeout, like SCO does. +# +test "$SULOGIN" = yes && sulogin -t 30 $CONSOLE + +# +# Ensure that bdflush (update) is running before any major I/O is +# performed (the following fsck is a good example of such activity :). +# +test -x /sbin/update && update + +# +# Read /etc/fstab. +# +exec 9>&0 &9 9>&- + +# +# Activate the swap device(s) in /etc/fstab. This needs to be done +# before fsck, since fsck can be quite memory-hungry. +# +doswap=no +test -d /proc/1 || mount -n /proc +case "`uname -r`" in + 2.[0123].*) + if test $swap_on_md = yes && grep -qs resync /proc/mdstat + then + test "$VERBOSE" != no && echo "Not activating swap - RAID array resyncing" + else + doswap=yes + fi + ;; + *) + doswap=yes + ;; +esac +if test $doswap = yes +then + test "$VERBOSE" != no && echo "Activating swap" + swapon -a 2> /dev/null +fi + +# +# Check the root filesystem. +# +if test -f /fastboot || test $rootcheck = no +then + test $rootcheck = yes && echo "Fast boot, no filesystem check" +else + # + # Ensure that root is quiescent and read-only before fsck'ing. + # + mount -n -o remount,ro / + if test $? = 0 + then + if test -f /forcefsck + then + force="-f" + else + force="" + fi + if test "$FSCKFIX" = yes + then + fix="-y" + else + fix="-a" + fi + spinner="-C" + case "$TERM" in + dumb|network|unknown|"") spinner="" ;; + esac + test `uname -m` = s390 && spinner="" # This should go away + test "$VERBOSE" != no && echo "Checking root filesystem..." + fsck $spinner $force $fix / + # + # If there was a failure, drop into single-user mode. + # + # NOTE: "failure" is defined as exiting with a return code of + # 2 or larger. A return code of 1 indicates that filesystem + # errors were corrected but that the boot may proceed. + # + + echo "RETURNCODE: [$RTC]" + + if test "$RTC" -gt 3 + then + + # Since this script is run very early in the boot-process, it should be safe to assume that the + # output is printed to VT1. However, some distributions use a bootsplash to hide the "ugly" boot + # messages and having the bootsplash "hang" due to a waiting fsck prompt is less than ideal + chvt 1 + + # Surprise! Re-directing from a HERE document (as in + # "cat << EOF") won't work, because the root is read-only. + echo + echo "fsck failed. Please repair manually and reboot. " + echo "Please note that the root filesystem is currently " + echo "mounted read-only. To remount it read-write:" + echo + echo " # mount -n -o remount,rw /" + echo + echo "CONTROL-D will exit from this shell" + echo "and REBOOT the system." + echo + # Start a single user shell on the console + /sbin/sulogin $CONSOLE + reboot -f + fi + else + echo "*** ERROR! Cannot fsck root fs because it is not mounted read-only!" + echo + fi +fi + +devrootfound=$(grep "/dev/root" /proc/mounts | \ + awk '{if ($4 = /rw/) print "found";}' ) + +if [ -n "$devrootfound" -a "$devrootfound" = "found" ]; then + echo "Read/write /dev/root found." + exit 0 +fi + +if mount -vf -o remount / 2> /dev/null | \ + awk '{if ($6 ~ /rw/) exit 0; else exit 1; }' && \ + ! touch -c / 2> /dev/null + then + echo " Remounting root filesystem read/write" + mount -n -o remount,$rootmode / +fi + +if test "$rootmode" = rw +then + if test ! -L /etc/mtab + then + rm -f /etc/mtab~ /etc/nologin + : > /etc/mtab + fi + mount -f -o remount / + mount -f /proc + test "$devfs" && grep -q '^devfs /dev' /proc/mounts && mount -f "$devfs" +fi + +: exit 0 diff --git a/packages/initscripts/initscripts-1.0/foonas/devices b/packages/initscripts/initscripts-1.0/foonas/devices new file mode 100755 index 0000000000..f83ea63598 --- /dev/null +++ b/packages/initscripts/initscripts-1.0/foonas/devices @@ -0,0 +1,70 @@ +#!/bin/sh +# +# Devfs handling script. Since we arent running devfsd due to various reasons +# which I will not lay out here, we need to create some links for compatibility. + +. /etc/default/rcS + +# exit without doing anything if udev is active +if test -e /dev/.udev -o -e /dev/.udevdb; then + exit 0 +fi + +if test -e /dev/.devfsd +then + if test "$VERBOSE" != "no"; then echo -n "Setting up device links for devfs: "; fi + [ -e /dev/.linksmade ] && exit 0 + + ln -s /dev/tts/0 /dev/ttySA0 + ln -s /dev/tts/1 /dev/ttySA1 + + ln -s /dev/sound/dsp /dev/dsp + ln -s /dev/sound/mixer /dev/mixer + + ln -s /dev/misc/rtc /dev/rtc + + # + # some friendly disk links + # + ln -s /dev/discs/disc0/disc /dev/hda + ln -s /dev/discs/disc1/disc /dev/hdb + for i in 1 2 3 4; do + ln -s /dev/discs/disc0/part$i /dev/hda$i + ln -s /dev/discs/disc1/part$i /dev/hdb$i + done + + ## need this so that ppp will autoload the ppp modules + mknod /dev/ppp c 108 0 + ln -s /dev/zero /dev/.linksmade + + if test "$VERBOSE" != "no"; then echo "done"; fi +else + if test "$VERBOSE" != "no"; then echo -n "Mounting /dev ramdisk: "; fi + mount -t ramfs ramfs /dev || mount -t tmpfs ramfs /dev + if test $? -ne 0; then + if test "$VERBOSE" != "no"; then echo "failed"; fi + else + if test "$VERBOSE" != "no"; then echo "done"; fi + fi + if test "$VERBOSE" != "no"; then echo -n "Populating /dev: "; fi + cd / + mkdir -p dev/input + mkdir -p dev/msys + mkdir -p dev/pts + mkdir -p dev/vc + mkdir -p dev/snd + mkdir -p dev/tts + for i in 0 1 2 3 4 5 6 7 8 9; do + ln -s /dev/tty$i /dev/vc/$i + done + ln -sf /proc/self/fd /dev/fd + ln -sf /proc/kcore /dev/core + /sbin/makedevs -r / -D /etc/device_table + if test $? -ne 0; then + if test "$VERBOSE" != "no"; then echo "failed"; fi + else + if test "$VERBOSE" != "no"; then echo "done"; fi + fi +fi + +exit 0 diff --git a/packages/initscripts/initscripts-1.0/foonas/domainname.sh b/packages/initscripts/initscripts-1.0/foonas/domainname.sh new file mode 100644 index 0000000000..7113467d8c --- /dev/null +++ b/packages/initscripts/initscripts-1.0/foonas/domainname.sh @@ -0,0 +1,5 @@ +# +# domainname.sh Set the domainname. +# +test -r /etc/defaultdomain && + cat /etc/defaultdomain >/proc/sys/kernel/domainname diff --git a/packages/initscripts/initscripts-1.0/foonas/halt b/packages/initscripts/initscripts-1.0/foonas/halt new file mode 100755 index 0000000000..f22d892d46 --- /dev/null +++ b/packages/initscripts/initscripts-1.0/foonas/halt @@ -0,0 +1,27 @@ +#! /bin/sh +# +# halt Execute the halt command. +# +# Version: @(#)halt 2.84-2 07-Jan-2002 miquels@cistron.nl +# + +PATH=/sbin:/bin:/usr/sbin:/usr/bin + +# See if we need to cut the power. +if test -x /etc/init.d/ups-monitor +then + /etc/init.d/ups-monitor poweroff +fi + +# Don't shut down drives if we're using RAID. +hddown="-h" +if grep -qs '^md.*active' /proc/mdstat +then + hddown="" +fi + +echo "Powering down..." +scc -p off +halt -d -f -i -p $hddown + +: exit 0 diff --git a/packages/initscripts/initscripts-1.0/foonas/reboot b/packages/initscripts/initscripts-1.0/foonas/reboot new file mode 100755 index 0000000000..05a82be4c0 --- /dev/null +++ b/packages/initscripts/initscripts-1.0/foonas/reboot @@ -0,0 +1,12 @@ +#! /bin/sh +# +# reboot Execute the reboot command. +# +# Version: @(#)reboot 2.75 22-Jun-1998 miquels@cistron.nl +# + +PATH=/sbin:/bin:/usr/sbin:/usr/bin + +echo -n "Rebooting... " +scc -p restart +reboot -d -f -i diff --git a/packages/initscripts/initscripts-1.0/openturbostation/.mtn2git_empty b/packages/initscripts/initscripts-1.0/openturbostation/.mtn2git_empty deleted file mode 100644 index e69de29bb2..0000000000 diff --git a/packages/initscripts/initscripts-1.0/openturbostation/checkroot.sh b/packages/initscripts/initscripts-1.0/openturbostation/checkroot.sh deleted file mode 100755 index c69a773482..0000000000 --- a/packages/initscripts/initscripts-1.0/openturbostation/checkroot.sh +++ /dev/null @@ -1,212 +0,0 @@ -# -# checkroot.sh Check to root filesystem. -# -# Version: @(#)checkroot.sh 2.84 25-Jan-2002 miquels@cistron.nl -# - -. /etc/default/rcS - -# -# Set SULOGIN in /etc/default/rcS to yes if you want a sulogin to be spawned -# from this script *before anything else* with a timeout, like SCO does. -# -test "$SULOGIN" = yes && sulogin -t 30 $CONSOLE - -# -# Ensure that bdflush (update) is running before any major I/O is -# performed (the following fsck is a good example of such activity :). -# -test -x /sbin/update && update - -# -# Read /etc/fstab. -# -exec 9>&0 &9 9>&- - -# -# Activate the swap device(s) in /etc/fstab. This needs to be done -# before fsck, since fsck can be quite memory-hungry. -# -doswap=no -test -d /proc/1 || mount -n /proc -case "`uname -r`" in - 2.[0123].*) - if test $swap_on_md = yes && grep -qs resync /proc/mdstat - then - test "$VERBOSE" != no && echo "Not activating swap - RAID array resyncing" - else - doswap=yes - fi - ;; - *) - doswap=yes - ;; -esac -if test $doswap = yes -then - test "$VERBOSE" != no && echo "Activating swap" - swapon -a 2> /dev/null -fi - -# -# Check the root filesystem. -# -if test -f /fastboot || test $rootcheck = no -then - test $rootcheck = yes && echo "Fast boot, no filesystem check" -else - # - # Ensure that root is quiescent and read-only before fsck'ing. - # - mount -n -o remount,ro / - if test $? = 0 - then - if test -f /forcefsck - then - force="-f" - else - force="" - fi - if test "$FSCKFIX" = yes - then - fix="-y" - else - fix="-a" - fi - spinner="-C" - case "$TERM" in - dumb|network|unknown|"") spinner="" ;; - esac - test `uname -m` = s390 && spinner="" # This should go away - test "$VERBOSE" != no && echo "Checking root filesystem..." - fsck $spinner $force $fix / - # - # If there was a failure, drop into single-user mode. - # - # NOTE: "failure" is defined as exiting with a return code of - # 2 or larger. A return code of 1 indicates that filesystem - # errors were corrected but that the boot may proceed. - # - - echo "RETURNCODE: [$RTC]" - - if test "$RTC" -gt 3 - then - - # Since this script is run very early in the boot-process, it should be safe to assume that the - # output is printed to VT1. However, some distributions use a bootsplash to hide the "ugly" boot - # messages and having the bootsplash "hang" due to a waiting fsck prompt is less than ideal - chvt 1 - - # Surprise! Re-directing from a HERE document (as in - # "cat << EOF") won't work, because the root is read-only. - echo - echo "fsck failed. Please repair manually and reboot. " - echo "Please note that the root filesystem is currently " - echo "mounted read-only. To remount it read-write:" - echo - echo " # mount -n -o remount,rw /" - echo - echo "CONTROL-D will exit from this shell" - echo "and REBOOT the system." - echo - # Start a single user shell on the console - /sbin/sulogin $CONSOLE - reboot -f - fi - else - echo "*** ERROR! Cannot fsck root fs because it is not mounted read-only!" - echo - fi -fi - -devrootfound=$(grep "/dev/root" /proc/mounts | \ - awk '{if ($4 = /rw/) print "found";}' ) - -if [ -n "$devrootfound" -a "$devrootfound" = "found" ]; then - echo "Read/write /dev/root found." - exit 0 -fi - -if mount -vf -o remount / 2> /dev/null | \ - awk '{if ($6 ~ /rw/) exit 0; else exit 1; }' && \ - ! touch -c / 2> /dev/null - then - echo " Remounting root filesystem read/write" - mount -n -o remount,$rootmode / -fi - -if test "$rootmode" = rw -then - if test ! -L /etc/mtab - then - rm -f /etc/mtab~ /etc/nologin - : > /etc/mtab - fi - mount -f -o remount / - mount -f /proc - test "$devfs" && grep -q '^devfs /dev' /proc/mounts && mount -f "$devfs" -fi - -: exit 0 diff --git a/packages/initscripts/initscripts-1.0/openturbostation/devices b/packages/initscripts/initscripts-1.0/openturbostation/devices deleted file mode 100755 index f83ea63598..0000000000 --- a/packages/initscripts/initscripts-1.0/openturbostation/devices +++ /dev/null @@ -1,70 +0,0 @@ -#!/bin/sh -# -# Devfs handling script. Since we arent running devfsd due to various reasons -# which I will not lay out here, we need to create some links for compatibility. - -. /etc/default/rcS - -# exit without doing anything if udev is active -if test -e /dev/.udev -o -e /dev/.udevdb; then - exit 0 -fi - -if test -e /dev/.devfsd -then - if test "$VERBOSE" != "no"; then echo -n "Setting up device links for devfs: "; fi - [ -e /dev/.linksmade ] && exit 0 - - ln -s /dev/tts/0 /dev/ttySA0 - ln -s /dev/tts/1 /dev/ttySA1 - - ln -s /dev/sound/dsp /dev/dsp - ln -s /dev/sound/mixer /dev/mixer - - ln -s /dev/misc/rtc /dev/rtc - - # - # some friendly disk links - # - ln -s /dev/discs/disc0/disc /dev/hda - ln -s /dev/discs/disc1/disc /dev/hdb - for i in 1 2 3 4; do - ln -s /dev/discs/disc0/part$i /dev/hda$i - ln -s /dev/discs/disc1/part$i /dev/hdb$i - done - - ## need this so that ppp will autoload the ppp modules - mknod /dev/ppp c 108 0 - ln -s /dev/zero /dev/.linksmade - - if test "$VERBOSE" != "no"; then echo "done"; fi -else - if test "$VERBOSE" != "no"; then echo -n "Mounting /dev ramdisk: "; fi - mount -t ramfs ramfs /dev || mount -t tmpfs ramfs /dev - if test $? -ne 0; then - if test "$VERBOSE" != "no"; then echo "failed"; fi - else - if test "$VERBOSE" != "no"; then echo "done"; fi - fi - if test "$VERBOSE" != "no"; then echo -n "Populating /dev: "; fi - cd / - mkdir -p dev/input - mkdir -p dev/msys - mkdir -p dev/pts - mkdir -p dev/vc - mkdir -p dev/snd - mkdir -p dev/tts - for i in 0 1 2 3 4 5 6 7 8 9; do - ln -s /dev/tty$i /dev/vc/$i - done - ln -sf /proc/self/fd /dev/fd - ln -sf /proc/kcore /dev/core - /sbin/makedevs -r / -D /etc/device_table - if test $? -ne 0; then - if test "$VERBOSE" != "no"; then echo "failed"; fi - else - if test "$VERBOSE" != "no"; then echo "done"; fi - fi -fi - -exit 0 diff --git a/packages/initscripts/initscripts-1.0/openturbostation/domainname.sh b/packages/initscripts/initscripts-1.0/openturbostation/domainname.sh deleted file mode 100644 index 7113467d8c..0000000000 --- a/packages/initscripts/initscripts-1.0/openturbostation/domainname.sh +++ /dev/null @@ -1,5 +0,0 @@ -# -# domainname.sh Set the domainname. -# -test -r /etc/defaultdomain && - cat /etc/defaultdomain >/proc/sys/kernel/domainname diff --git a/packages/initscripts/initscripts-1.0/openturbostation/halt b/packages/initscripts/initscripts-1.0/openturbostation/halt deleted file mode 100755 index f22d892d46..0000000000 --- a/packages/initscripts/initscripts-1.0/openturbostation/halt +++ /dev/null @@ -1,27 +0,0 @@ -#! /bin/sh -# -# halt Execute the halt command. -# -# Version: @(#)halt 2.84-2 07-Jan-2002 miquels@cistron.nl -# - -PATH=/sbin:/bin:/usr/sbin:/usr/bin - -# See if we need to cut the power. -if test -x /etc/init.d/ups-monitor -then - /etc/init.d/ups-monitor poweroff -fi - -# Don't shut down drives if we're using RAID. -hddown="-h" -if grep -qs '^md.*active' /proc/mdstat -then - hddown="" -fi - -echo "Powering down..." -scc -p off -halt -d -f -i -p $hddown - -: exit 0 diff --git a/packages/initscripts/initscripts-1.0/openturbostation/reboot b/packages/initscripts/initscripts-1.0/openturbostation/reboot deleted file mode 100755 index 05a82be4c0..0000000000 --- a/packages/initscripts/initscripts-1.0/openturbostation/reboot +++ /dev/null @@ -1,12 +0,0 @@ -#! /bin/sh -# -# reboot Execute the reboot command. -# -# Version: @(#)reboot 2.75 22-Jun-1998 miquels@cistron.nl -# - -PATH=/sbin:/bin:/usr/sbin:/usr/bin - -echo -n "Rebooting... " -scc -p restart -reboot -d -f -i diff --git a/packages/initscripts/initscripts-openturbostation_1.0.bb b/packages/initscripts/initscripts-openturbostation_1.0.bb deleted file mode 100644 index 68e291f566..0000000000 --- a/packages/initscripts/initscripts-openturbostation_1.0.bb +++ /dev/null @@ -1,174 +0,0 @@ -# -# OpenTurbostation stuff sorta specific for the turbostation -# -# This is, in effect, an extended patch to fix various -# problems in the initscripts on SlugOS. The problems -# mostly come down to the order the scripts are executed -# in. -include initscripts_${PV}.bb - -RCONFLICTS = "initscripts" -# All other standard definitions inherited from initscripts -# Except the PR which is hacked here. The format used is -# a suffix -PR := "${PR}.11" - -FILESPATH = "${@base_set_filespath([ '${FILE_DIRNAME}/${P}', '${FILE_DIRNAME}/initscripts-${PV}', '${FILE_DIRNAME}/files', '${FILE_DIRNAME}' ], d)}" - -PACKAGES = "${PN}" - -SRC_URI += "file://openturbostation/domainname.sh" -SRC_URI += "file://openturbostation/devices" -SRC_URI += "file://openturbostation/halt" -SRC_URI += "file://openturbostation/reboot" -SRC_URI += "file://openturbostation/checkroot.sh" - -# Without this it is not possible to patch checkroot.sh -S = "${WORKDIR}" - -do_install_append() { - # the image build command now installs this for slugos - # except that mine doesn't. we don't need it, but we turnup - # expects it to at least exist - rm ${D}${sysconfdir}/device_table - touch ${D}${sysconfdir}/device_table - - # openprotium specific scripts - # install -m 0755 ${WORKDIR}/alignment.sh ${D}${sysconfdir}/init.d - install -m 0755 ${WORKDIR}/openturbostation/domainname.sh ${D}${sysconfdir}/init.d - install -m 0755 ${WORKDIR}/openturbostation/halt ${D}${sysconfdir}/init.d - install -m 0755 ${WORKDIR}/openturbostation/reboot ${D}${sysconfdir}/init.d - install -m 0755 ${WORKDIR}/openturbostation/devices ${D}${sysconfdir}/init.d - install -m 0755 ${WORKDIR}/openturbostation/checkroot.sh ${D}${sysconfdir}/init.d - - # Remove the do install links (this detects a change to the - # initscripts .bb file - it will cause a build failure here.) - # This is a copy of the ln -sf lines from the initscripts - # do_install. - rm ${D}${sysconfdir}/rc2.d/S99rmnologin - rm ${D}${sysconfdir}/rc3.d/S99rmnologin - rm ${D}${sysconfdir}/rc4.d/S99rmnologin - rm ${D}${sysconfdir}/rc5.d/S99rmnologin - rm ${D}${sysconfdir}/rc6.d/S20sendsigs -# rm ${D}${sysconfdir}/rc6.d/S30urandom - rm ${D}${sysconfdir}/rc6.d/S31umountnfs.sh - rm ${D}${sysconfdir}/rc6.d/S40umountfs - rm ${D}${sysconfdir}/rcS.d/S30ramdisk - rm ${D}${sysconfdir}/rc6.d/S90reboot - rm ${D}${sysconfdir}/rc0.d/S20sendsigs -# rm ${D}${sysconfdir}/rc0.d/S30urandom - rm ${D}${sysconfdir}/rc0.d/S31umountnfs.sh - rm ${D}${sysconfdir}/rc0.d/S40umountfs - rm ${D}${sysconfdir}/rc0.d/S90halt - rm ${D}${sysconfdir}/rcS.d/S02banner - rm ${D}${sysconfdir}/rcS.d/S10checkroot.sh -# rm ${D}${sysconfdir}/rcS.d/S30checkfs.sh - rm ${D}${sysconfdir}/rcS.d/S35mountall.sh - rm ${D}${sysconfdir}/rcS.d/S39hostname.sh - rm ${D}${sysconfdir}/rcS.d/S45mountnfs.sh - rm ${D}${sysconfdir}/rcS.d/S55bootmisc.sh -# rm ${D}${sysconfdir}/rcS.d/S55urandom - rm ${D}${sysconfdir}/rcS.d/S99finish - rm ${D}${sysconfdir}/rcS.d/S05devices - # udev will run at S04 if installed - rm ${D}${sysconfdir}/rcS.d/S03sysfs - rm ${D}${sysconfdir}/rcS.d/S38devpts.sh - rm -f ${D}${sysconfdir}/rcS.d/S06alignment - rm ${D}${sysconfdir}/rcS.d/S37populate-volatile.sh - rm ${D}${sysconfdir}/rc0.d/S25save-rtc.sh - rm ${D}${sysconfdir}/rc6.d/S25save-rtc.sh - - - - # Check the result - find ${D}${sysconfdir}/rc?.d ! -type d -print | { - status=0 - while read d - do - oenote "initscripts-openturbostation: unexpected link $d" - status=1 - done - test $status -eq 0 || - oefatal "initscripts-openturbostation: new links break do_install" - } - - # Set the run-level links - # - # Startup (S) links - UNCHANGED - # - # Keep these in order of startup - S, then 1, 2-5, 0,6 - # according to the level in which the script starts (or stops) first. - update-rc.d -r ${D} banner start 2 S . - update-rc.d -r ${D} sysfs.sh start 3 S . - # udev runs at S 04 . - update-rc.d -r ${D} devices start 5 S . - # update-rc.d -r ${D} alignment.sh start 7 S . - # busybox hwclock.sh (slugos-init) starts here (08) - # slugos-init umountinitrd runs here (09) - - update-rc.d -r ${D} checkroot.sh start 10 S . - # slugos buffer syslog starts here (11) - # sysconfsetup runs at S 12 - # modutils.sh runs at S 20 - # checkfs.sh is currently disabled from S 30 (and won't work on SlugOS) - # ramdisk is not used on SlugOS, would run at S 30 - update-rc.d -r ${D} mountall.sh start 35 S . - # base-files populate-volatile.sh runs at S37 - update-rc.d -r ${D} devpts.sh start 38 S . - # slugos file syslog starts here (39) - update-rc.d -r ${D} populate-volatile.sh start 37 S . - - # set hostname and domainname before the network script works (by - # entering them at level 40), networking may reset them. - update-rc.d -r ${D} domainname.sh start 40 S . - update-rc.d -r ${D} hostname.sh start 40 S . - # network runs at S 40 - # slugos network syslog starts here (44) - update-rc.d -r ${D} mountnfs.sh start 45 S . - - update-rc.d -r ${D} bootmisc.sh start 55 S . - # urandom is currently disabled from S 55 (and won't work with tmpfs /var) - - # ipkg-cl configure runs at S 98 - update-rc.d -r ${D} finish start 99 S . - - # - # User (2-5) links - UNCHANGED - # rmnologin is the only thing added to user levels - update-rc.d -r ${D} rmnologin start 99 2 3 4 5 . - - # - # Shutdown (0,6) links - !!!CHANGED!!! - # - # The problem here is that netbase installs K40networking but portmap - # installs S32portmap. One of these has to change! The safe change - # is to make the networking stop at S40, so all network related shutdown - # must be in a K script or