aboutsummaryrefslogtreecommitdiffstats
path: root/conf/machine
AgeCommit message (Collapse)Author
2011-03-30omap4430-panda: Switch panda to use new omap4 include + add new SOC_FAMILYRoger Monk
* Add new omap4.inc * Switch machine config to use new omap4 include Signed-off-by: Roger Monk <r-monk@ti.com> Signed-off-by: Koen Kooi <koen@openembedded.org>
2011-03-26omap4430-panda: Prefer u-boot-git and remove extra custom x-loadRoger Monk
* Switch to using u-boot-git (instead of u-boot-sakoman) * Remove reference to custom x-load * Remove extra image depends (which will come from common include) Signed-off-by: Roger Monk <r-monk@ti.com> Signed-off-by: Koen Kooi <k-kooi@ti.com>
2011-03-24bug20: add wifi and bluetooth to MACHINE_FEATURESDenis Carikli
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Acked-by: Stefan Schmidt <stefan@buglabs.net> Signed-off-by: Stefan Schmidt <stefan@buglabs.net>
2011-03-17dm368-evm: Add configuration for DM368 machinechase maupin
* Added the configuration for the dm368-evm machine type. * Updated the sort.sh script * Updated the Linux kernel and u-boot recipes to support this new device. Signed-off-by: Chase Maupin <Chase.Maupin@ti.com> Signed-off-by: Koen Kooi <koen@openembedded.org>
2011-03-01New machine pcm043 Phytec phyCORE-i.MX35Jan Kobler
The new machine pcm043 is the board Phytec phyCORE-i.MX35. The machine name pcm043 is chosen, because it is already used in the linux kernel for this board. BSP is derived from BSP of machine mx31ads. Linux kernel is based on Phytec Linux BSP for phyCORE-i.MX35 PD 10.1.1 Vendor page: http://www.phytec.com/products/rdk/ARM-XScale/phyCORE-ARM11-i.MX35.html Tutorial: http://en.gentoo-wiki.com/wiki/Phytec_phyCORE-iMX35/Openembedded Signed-off-by: Jan Kobler <eng1@koblersystems.de> Signed-off-by: Tom Rini <tom_rini@mentor.com>
2011-03-01ben-nanonote: build linux-kexecboot uImage (disabled by default)Andrea Adami
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
2011-02-24conf/machine/beaglehyb.conf: new machine Goldelico's Beagle Board HybridDavid Lanzendörfer
linux-gta04: add kernel for Beagle Board Hybrid and the forthcoming Goldelico GTA04 Machine
2011-02-23Revert "make sd-boot default for sam9m10ekes"Tom Rini
This was another out-of-order push from me that depends on other changes. Take this out for now so that u-boot builds again. This reverts commit ccb60316650162a417e519a123d9fd09eae9911e.
2011-02-21ronetix-pm9g45: Added new machine, with kernel 2.6.30.Leon Woestenberg
2011-02-20jornada6xx/jornada7xx/mp900c: increase amount of used VTs.Filip Zyzniewski
Signed-off-by: Filip Zyzniewski <filip.zyzniewski@gmail.com> Signed-off-by: Tom Rini <tom_rini@mentor.com>
2011-02-19sciphone-g2: Initial support for Sciphone G2 (based on MT6235)Marcin Mielczarczyk
This patch adds Sciphone G2 target to OpenEmbedded environment. It also defines osmocomBB repositories for U-Boot and Linux kernel. Signed-off-by: Marcin Mielczarczyk <marcin.mielczarczyk@tieto.com> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2011-02-17bug20: add MACHINE_EXTRA_RRECOMMENDSDenis 'GNUtoo' Carikli
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
2011-02-15nokia900: add kernel-module-ubifs to RRECOMMENDed modulesMartin Jansa
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2011-02-12cortex-m3: adjusted target cflagsEnrico Scholz
Explicit '-mthumb' is required because Cortex-M3 does not support ARM instructions and actual flags cause gcc to fail with 'error: target CPU does not support ARM mode'. The '-mcpu=cortex-m3' is shorter than '-march=armv7-m -mtune=cortex-m3' and enables workarounds like '-mfix-cortex-m3-ldrd'. Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Signed-off-by: Khem Raj <raj.khem@gmail.com>
2011-02-12kirkwood: move preferred kernel provider to linuxFrans Meulenbroeks
preferred kernel provider used to be linux-kirkwood, but that has not been updated for almost a year and seems dead Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com> Signed-off-by: Tom Rini <tom_rini@mentor.com>
2011-02-12Indicate availability of sd-boot for at91sam9g45/m10Ulf Samuelsson
Signed-off-by: Ulf Samuelsson <ulf.samuelsson@atmel.com> Signed-off-by: Tom Rini <tom_rini@mentor.com>
2011-02-12make sd-boot default for sam9m10ekesUlf Samuelsson
Signed-off-by: Ulf Samuelsson <ulf.samuelsson@atmel.com> Signed-off-by: Tom Rini <tom_rini@mentor.com>
2011-02-12Add configuration file for Visstrim_M10 board.Javier Martin
Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Tom Rini <tom_rini@mentor.com>
2011-02-09omapzoom2/3.conf : switch to linux-omap kernelGraeme Gregory
Signed-off-by: Graeme Gregory <dp@xora.org.uk>
2011-02-03nokia900.conf: added ubifs argumentsDenis 'GNUtoo' Carikli
Thanks JaMa on #openmoko-cdevel on Freenode on irc for help on the sub-pages: Feb 02 11:41:58 <JaMa|Wrk> GNUtoo|laptop: also for gta02 I had to sacrifise sub-pages, -s same as -m otherwise it always failed Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
2011-01-31VMX25: Add machine support for vmx25sujak.marek
* i.mx25 cpu based module * removed PREFERRED_VERSION_linux line * added correct UBI VOLNAME * tested on angstom console, terminal, x11, qt4e image * depends on vmx25 barebox 2010.10 patch, vmx25 kernel 2.5.35 patch Signed-off-by: Marek Sujak <sujak.marek@gmail.com> Signed-off-by: Eric Bénard <eric@eukrea.com>
2011-01-28palmpre machine: add compat-wireless-2.6-old to MACHINE_EXTRA_RDEPENDSSimon Busch
Signed-off-by: Simon Busch <morphis@gravedo.de>
2011-01-28palmpre machine: split MACHINE_EXTRA_DEPENDS into linesSimon Busch
Signed-off-by: Simon Busch <morphis@gravedo.de>
2011-01-28palmpre machine: bump kernel PRSimon Busch
Signed-off-by: Simon Busch <morphis@amethyst.openembedded.net>
2011-01-28palmpre machine: add udev-compat preferred providerSimon Busch
Signed-off-by: Simon Busch <morphis@amethyst.openembedded.net>
2011-01-27adb4000.conf: New machine, kernel and u-boot support.Leon Woestenberg
STK ADB4000 is a development board with a SAM9G45 SODIMM CPU module. These patches are from the manufacturer (In-Circuit). Resulting kernel boots on the board. Signed-off-by: Leon Woestenberg <leon@sidebranch.com>
2011-01-25p2020rdb: Add xserver-xorg stuffTom Rini
Signed-off-by: Tom Rini <tom_rini@mentor.com>
2011-01-25p2020rdb: New Freescale QorQ P2 machine, based on p1020rdb (P1)Leon Woestenberg
Signed-off-by: Leon Woestenberg <leon@sidebranch.com>
2011-01-24omap3.inc: bump MACHINE_KERNEL_PR for kernel changesKoen Kooi
Signed-off-by: Koen Kooi <koen@openembedded.org>
2011-01-22xxs1500.conf: Remove this board from OEKhem Raj
* The kernel is no more fetchable as reported in bugzilla/1737 * Vendor has EOLed the product Signed-off-by: Khem Raj <raj.khem@gmail.com>
2011-01-18linux-omap 2.6.37: replace various patch with upstream versions and rediffKoen Kooi
* The beagle poweron patch was split into 3 and accepted upstream thanks to Nishant * the 2 720MHz patches were combined and pending acceptance thanks to Sanjeev * the boardfile 720MHz patches aren't needed anymore Signed-off-by: Koen Kooi <koen@openembedded.org>
2011-01-17mpc8315e-rdb: Setup for xserver-xorgTom Rini
Signed-off-by: Tom Rini <tom_rini@mentor.com>
2011-01-17p2020ds: Setup for xserver-xorgTom Rini
Signed-off-by: Tom Rini <tom_rini@mentor.com>
2011-01-14i586-generic: define udevdir and OLDEST_KERNELOtavio Salvador
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2011-01-10qemu.inc: Switch to xserver-xorgTom Rini
Keeping with xserver-kdrive means that we have a sometimes race in that xserver-kdrive is too old for the other xorg components that are built (with X11R7.5) to build. So we switch to xserver-xorg and appropriate modules. Tested on qemux86 and x11-image. Acked-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Tom Rini <tom_rini@mentor.com>
2011-01-09htcdream: load the wl1251_sdio (the wifi driver) module by default.Denis 'GNUtoo' Carikli
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
2011-01-07machines: introduce new palmpre2 machineSimon Busch
The new palmpre2 machine is nearly the same as the already available palmpre machine. The only difference is the internal processor. The palmpre2 uses a omap 3630 and the palmpre a omap 3430 processor. This takes us into the situation to handle two different machines. Signed-off-by: Simon Busch <morphis@amethyst.openembedded.net>
2011-01-07palmpre machine: split into machine and common partsSimon Busch
Signed-off-by: Simon Busch <morphis@amethyst.openembedded.net>
2011-01-06linux-omap-psp: add OCF supportChase Maupin
* Add a patch to put OCF support into the linux-omap-psp kernel * Add support to the defconfig file for am37x-evm for OCF * Bump the MACHINE_KERNEL_PR Signed-off-by: Chase Maupin <Chase.Maupin@ti.com> Signed-off-by: Koen Kooi <k-kooi@ti.com>
2011-01-06ac100: fix XSERVERKoen Kooi
Signed-off-by: Koen Kooi <koen@openembedded.org>
2011-01-05palmpre machine: switch to .tar.gz format for rootfsSimon Busch
Signed-off-by: Simon Busch <morphis@amethyst.openembedded.net>
2011-01-05tegra2: change feed and basearch to armv7a-vfp as suggested by koenHenning Heinold
2011-01-05linux-ac100: support for toshiba AC100/dynabookHenning Heinold
2011-01-04palmpre machine: override MACHINE_KERNEL_PR as we do not use linux-omapSimon Busch
Signed-off-by: Simon Busch <morphis@gravedo.de>
2011-01-01omap3: bump MACHINE_KERNEL_PRKoen Kooi
Signed-off-by: Koen Kooi <koen@openembedded.org>
2010-12-31omap3: bump MACHINE_KERNEL_PRKoen Kooi
2010-12-28linux_2.6.35: use mmcblk1p1 for rootfs on nokia900Martin Jansa
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2010-12-25nokia900: use just linux instead of linux-nokia900 as virtual/kernel providerMartin Jansa
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2010-12-23u-boot_git: add support for nokia900Martin Jansa
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2010-12-21linux-omap4: enable some more modulesKoen Kooi
Signed-off-by: Koen Kooi <koen@openembedded.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-03 21:15:56 +0000