Age | Commit message (Collapse) | Author |
|
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Explicit '-mthumb' is required because Cortex-M3 does not support ARM
instructions and actual flags cause gcc to fail with 'error: target CPU
does not support ARM mode'.
The '-mcpu=cortex-m3' is shorter than '-march=armv7-m -mtune=cortex-m3'
and enables workarounds like '-mfix-cortex-m3-ldrd'.
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
preferred kernel provider used to be linux-kirkwood, but
that has not been updated for almost a year and seems dead
Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
Signed-off-by: Tom Rini <tom_rini@mentor.com>
|
|
Signed-off-by: Ulf Samuelsson <ulf.samuelsson@atmel.com>
Signed-off-by: Tom Rini <tom_rini@mentor.com>
|
|
Signed-off-by: Ulf Samuelsson <ulf.samuelsson@atmel.com>
Signed-off-by: Tom Rini <tom_rini@mentor.com>
|
|
Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Tom Rini <tom_rini@mentor.com>
|
|
Signed-off-by: Graeme Gregory <dp@xora.org.uk>
|
|
Thanks JaMa on #openmoko-cdevel on Freenode on irc for help on the sub-pages:
Feb 02 11:41:58 <JaMa|Wrk> GNUtoo|laptop: also for gta02 I had to sacrifise sub-pages, -s same as -m otherwise it always failed
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
|
|
* i.mx25 cpu based module
* removed PREFERRED_VERSION_linux line
* added correct UBI VOLNAME
* tested on angstom console, terminal, x11, qt4e image
* depends on vmx25 barebox 2010.10 patch, vmx25 kernel 2.5.35 patch
Signed-off-by: Marek Sujak <sujak.marek@gmail.com>
Signed-off-by: Eric BĂ©nard <eric@eukrea.com>
|
|
Signed-off-by: Simon Busch <morphis@gravedo.de>
|
|
Signed-off-by: Simon Busch <morphis@gravedo.de>
|
|
Signed-off-by: Simon Busch <morphis@amethyst.openembedded.net>
|
|
Signed-off-by: Simon Busch <morphis@amethyst.openembedded.net>
|
|
STK ADB4000 is a development board with a SAM9G45 SODIMM CPU module.
These patches are from the manufacturer (In-Circuit).
Resulting kernel boots on the board.
Signed-off-by: Leon Woestenberg <leon@sidebranch.com>
|
|
Signed-off-by: Tom Rini <tom_rini@mentor.com>
|
|
Signed-off-by: Leon Woestenberg <leon@sidebranch.com>
|
|
Signed-off-by: Koen Kooi <koen@openembedded.org>
|
|
* The kernel is no more fetchable as reported in bugzilla/1737
* Vendor has EOLed the product
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
* The beagle poweron patch was split into 3 and accepted upstream thanks to Nishant
* the 2 720MHz patches were combined and pending acceptance thanks to Sanjeev
* the boardfile 720MHz patches aren't needed anymore
Signed-off-by: Koen Kooi <koen@openembedded.org>
|
|
Signed-off-by: Tom Rini <tom_rini@mentor.com>
|
|
Signed-off-by: Tom Rini <tom_rini@mentor.com>
|
|
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Keeping with xserver-kdrive means that we have a sometimes race
in that xserver-kdrive is too old for the other xorg components that
are built (with X11R7.5) to build. So we switch to xserver-xorg and
appropriate modules. Tested on qemux86 and x11-image.
Acked-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Tom Rini <tom_rini@mentor.com>
|
|
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
|
|
The new palmpre2 machine is nearly the same as the already available palmpre machine. The only
difference is the internal processor. The palmpre2 uses a omap 3630 and the palmpre a omap 3430
processor. This takes us into the situation to handle two different machines.
Signed-off-by: Simon Busch <morphis@amethyst.openembedded.net>
|
|
Signed-off-by: Simon Busch <morphis@amethyst.openembedded.net>
|
|
* Add a patch to put OCF support into the linux-omap-psp kernel
* Add support to the defconfig file for am37x-evm for OCF
* Bump the MACHINE_KERNEL_PR
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Koen Kooi <k-kooi@ti.com>
|
|
Signed-off-by: Koen Kooi <koen@openembedded.org>
|
|
Signed-off-by: Simon Busch <morphis@amethyst.openembedded.net>
|
|
|
|
|
|
Signed-off-by: Simon Busch <morphis@gravedo.de>
|
|
Signed-off-by: Koen Kooi <koen@openembedded.org>
|
|
|
|
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Signed-off-by: Koen Kooi <koen@openembedded.org>
|
|
* Add new machine type for the am3517-crane board.
* Craneboard is a hardware development platform based
on the Sitara AM3517 ARM Cortex - A8 microprocessor
device. This is a low cost reference design.
* You can find more about CraneBoard here:
[1] http://www.ti.com/arm
[2] http://www.mistralsolutions.com/products/craneboard.php
[3] http://www.craneboard.org
Signed-off-by: Anil kumar M <anilm@mistralsolutions.com>
Signed-off-by: Koen Kooi <koen@openembedded.org>
|
|
* This patch adds linnux-omap-psp kernel support for am3517-crane
board.
* Craneboard is a hardware development platform based
on the Sitara AM3517 ARM Cortex - A8 microprocessor
device. This is a low cost reference design.
* You can find more about CraneBoard here:
[1] http://www.ti.com/arm
[2] http://www.mistralsolutions.com/products/craneboard.php
[3] http://www.craneboard.org
Signed-off-by: Anil kumar M <anilm@mistralsolutions.com>
Signed-off-by: Koen Kooi <koen@openembedded.org>
|
|
Signed-off-by: Koen Kooi <koen@openembedded.org>
|
|
|
|
Signed-off-by: Koen Kooi <koen@openembedded.org>
|
|
Android was ported to Apple's iDevices including the iPhone3G by the
iDroid Project ( http://www.idroidproject.org/wiki/Main_Page )
Their kernel is standard enough to be able to run GNU/Linux distributions
such as SHR
Signed-off-by: Chris 'Lopi' Spehn <chris.spehn@gmail.com>
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
Lets add xserver and some screen info that we know work
well.
Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
|
|
Signed-off-by: Koen Kooi <koen@openembedded.org>
|
|
* Update the linux recipe for linux-davinci_git to patch kernel for
omapl138 machines
* Add uio_pruss kernel patches for omapl138 platform
* Bump the Kernel PR
Signed-off-by: Melissa Watkins <m-watkins@ti.com>
Signed-off-by: Chase Maupin <chase.maupin@ti.com>
Signed-off-by: Koen Kooi <k-kooi@ti.com>
|
|
Signed-off-by: Klaus Kurzmann <mok@fluxnetz.de>
|
|
* list all which are loaded after boot (ie with udev)
* remove those which are handled by some task-base-* anyways (like g-ether, vfat etc)
* remove those which are in RDEPENDS of some already listed module here
Acked-by: Klaus Kurzmann <mok@fluxnetz.de>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|