diff options
Diffstat (limited to 'recipes/u-boot/u-boot-git/omap3evm/0014-EMAC-driver-cleanup-removed-debug-prints.patch')
-rw-r--r-- | recipes/u-boot/u-boot-git/omap3evm/0014-EMAC-driver-cleanup-removed-debug-prints.patch | 419 |
1 files changed, 0 insertions, 419 deletions
diff --git a/recipes/u-boot/u-boot-git/omap3evm/0014-EMAC-driver-cleanup-removed-debug-prints.patch b/recipes/u-boot/u-boot-git/omap3evm/0014-EMAC-driver-cleanup-removed-debug-prints.patch deleted file mode 100644 index 5630ac6313..0000000000 --- a/recipes/u-boot/u-boot-git/omap3evm/0014-EMAC-driver-cleanup-removed-debug-prints.patch +++ /dev/null @@ -1,419 +0,0 @@ -From 8ceef1101c96a5357a7ec82084a53e7001456170 Mon Sep 17 00:00:00 2001 -From: Sriram <srk@ti.com> -Date: Mon, 29 Jun 2009 03:35:29 +0530 -Subject: [PATCH 14/16] EMAC driver: cleanup(removed debug prints) - -Cleaned up the EMAC driver : removed debug prints and other -debugging aids ---- - drivers/net/ticpgmac.c | 127 ++++++++++++++++------------------------------- - 1 files changed, 43 insertions(+), 84 deletions(-) - -diff --git a/drivers/net/ticpgmac.c b/drivers/net/ticpgmac.c -index eeff23b..78a54d8 100644 ---- a/drivers/net/ticpgmac.c -+++ b/drivers/net/ticpgmac.c -@@ -43,14 +43,11 @@ - #include <asm/arch/ticpgmac.h> - - --#define STATIC --#define PRINTF(args,...) -- - #ifdef CONFIG_DRIVER_TI_EMAC - - #ifdef CONFIG_CMD_NET - --unsigned int emac_dbg = 1; -+unsigned int emac_dbg = 0; - #define debug_emac(fmt,args...) if (emac_dbg) printf(fmt,##args) - - #define BD_TO_HW(x) \ -@@ -59,17 +56,17 @@ unsigned int emac_dbg = 1; - ( ( (x) == 0) ? 0 : ( (x) - EMAC_HW_RAM_ADDR + EMAC_WRAPPER_RAM_ADDR )) - - /* Internal static functions */ --STATIC int cpgmac_eth_hw_init (void); --STATIC int cpgmac_eth_open (void); --STATIC int cpgmac_eth_close (void); --STATIC int cpgmac_eth_send_packet (volatile void *packet, int length); --STATIC int cpgmac_eth_rcv_packet (void); --STATIC void cpgmac_eth_mdio_enable(void); -- --STATIC int gen_init_phy(int phy_addr); --STATIC int gen_is_phy_connected(int phy_addr); --STATIC int gen_get_link_status(int phy_addr); --STATIC int gen_auto_negotiate(int phy_addr); -+static int cpgmac_eth_hw_init (void); -+static int cpgmac_eth_open (void); -+static int cpgmac_eth_close (void); -+static int cpgmac_eth_send_packet (volatile void *packet, int length); -+static int cpgmac_eth_rcv_packet (void); -+static void cpgmac_eth_mdio_enable(void); -+ -+static int gen_init_phy(int phy_addr); -+static int gen_is_phy_connected(int phy_addr); -+static int gen_get_link_status(int phy_addr); -+static int gen_auto_negotiate(int phy_addr); - - /* Wrappers exported to the U-Boot proper */ - int eth_hw_init(void) -@@ -105,7 +102,7 @@ void eth_mdio_enable(void) - - /* cpgmac_eth_mac_addr[0] goes out on the wire first */ - --STATIC u_int8_t cpgmac_eth_mac_addr[] = { 0x00, 0xff, 0xff, 0xff, 0xff, 0x00 }; -+static u_int8_t cpgmac_eth_mac_addr[] = { 0x00, 0xff, 0xff, 0xff, 0xff, 0x00 }; - - /* - * This function must be called before emac_open() if you want to override -@@ -121,26 +118,26 @@ void cpgmac_eth_set_mac_addr(const u_int8_t *addr) - } - - /* EMAC Addresses */ --STATIC volatile emac_regs *adap_emac = (emac_regs *)EMAC_BASE_ADDR; --STATIC volatile ewrap_regs *adap_ewrap = (ewrap_regs *)EMAC_WRAPPER_BASE_ADDR; --STATIC volatile mdio_regs *adap_mdio = (mdio_regs *)EMAC_MDIO_BASE_ADDR; -+static volatile emac_regs *adap_emac = (emac_regs *)EMAC_BASE_ADDR; -+static volatile ewrap_regs *adap_ewrap = (ewrap_regs *)EMAC_WRAPPER_BASE_ADDR; -+static volatile mdio_regs *adap_mdio = (mdio_regs *)EMAC_MDIO_BASE_ADDR; - - /* EMAC descriptors */ --STATIC volatile emac_desc *emac_rx_desc = (emac_desc *)(EMAC_WRAPPER_RAM_ADDR + EMAC_RX_DESC_BASE); --STATIC volatile emac_desc *emac_tx_desc = (emac_desc *)(EMAC_WRAPPER_RAM_ADDR + EMAC_TX_DESC_BASE); --STATIC volatile emac_desc *emac_rx_active_head = 0; --STATIC volatile emac_desc *emac_rx_active_tail = 0; --STATIC int emac_rx_queue_active = 0; -+static volatile emac_desc *emac_rx_desc = (emac_desc *)(EMAC_WRAPPER_RAM_ADDR + EMAC_RX_DESC_BASE); -+static volatile emac_desc *emac_tx_desc = (emac_desc *)(EMAC_WRAPPER_RAM_ADDR + EMAC_TX_DESC_BASE); -+static volatile emac_desc *emac_rx_active_head = 0; -+static volatile emac_desc *emac_rx_active_tail = 0; -+static int emac_rx_queue_active = 0; - - /* Receive packet buffers */ --STATIC unsigned char emac_rx_buffers[EMAC_MAX_RX_BUFFERS * (EMAC_MAX_ETHERNET_PKT_SIZE + EMAC_PKT_ALIGN)]; -+static unsigned char emac_rx_buffers[EMAC_MAX_RX_BUFFERS * (EMAC_MAX_ETHERNET_PKT_SIZE + EMAC_PKT_ALIGN)]; - - /* PHY address for a discovered PHY (0xff - not found) */ --STATIC volatile u_int8_t active_phy_addr = 0xff; -+static volatile u_int8_t active_phy_addr = 0xff; - --STATIC int no_phy_init (int phy_addr) { return(1); } --STATIC int no_phy_is_connected (int phy_addr) { return(1); } --STATIC int no_phy_get_link_status (int phy_addr) -+static int no_phy_init (int phy_addr) { return(1); } -+static int no_phy_is_connected (int phy_addr) { return(1); } -+static int no_phy_get_link_status (int phy_addr) - { - adap_emac->MACCONTROL = (EMAC_MACCONTROL_MIIEN_ENABLE - | EMAC_MACCONTROL_FULLDUPLEX_ENABLE); -@@ -149,7 +146,7 @@ STATIC int no_phy_get_link_status (int phy_addr) - #endif - return 1; - } --STATIC int no_phy_auto_negotiate (int phy_addr) { return(1); } -+static int no_phy_auto_negotiate (int phy_addr) { return(1); } - phy_t phy = { - .init = no_phy_init, - .is_phy_connected = no_phy_is_connected, -@@ -157,7 +154,7 @@ phy_t phy = { - .auto_negotiate = no_phy_auto_negotiate - }; - --STATIC void cpgmac_eth_mdio_enable(void) -+static void cpgmac_eth_mdio_enable(void) - { - u_int32_t clkdiv; - -@@ -177,7 +174,7 @@ STATIC void cpgmac_eth_mdio_enable(void) - * returns 2 - * Sets active_phy_addr variable when returns 1. - */ --STATIC int cpgmac_eth_phy_detect(void) -+static int cpgmac_eth_phy_detect(void) - { - u_int32_t phy_act_state; - int i; -@@ -247,7 +244,7 @@ int cpgmac_eth_phy_write(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t data) - } - - /* PHY functions for a generic PHY */ --STATIC int gen_init_phy(int phy_addr) -+static int gen_init_phy(int phy_addr) - { - int ret = 1; - -@@ -259,53 +256,44 @@ STATIC int gen_init_phy(int phy_addr) - return(ret); - } - --STATIC int gen_is_phy_connected(int phy_addr) -+static int gen_is_phy_connected(int phy_addr) - { - u_int16_t dummy; - - return(cpgmac_eth_phy_read(phy_addr, PHY_PHYIDR1, &dummy)); - } - --STATIC int gen_get_link_status(int phy_addr) -+static int gen_get_link_status(int phy_addr) - { - u_int16_t tmp,lpa_val,val; - - if (cpgmac_eth_phy_read(phy_addr, MII_STATUS_REG, &tmp) - && (tmp & 0x04)) { -- //printf("Phy %d MII_Status Reg=0x%x \n",phy_addr,tmp); -- //printf("MACCTRL 0x%x\n",adap_emac->MACCONTROL); - - cpgmac_eth_phy_read(phy_addr,MII_CTRL_REG,&val); -- //printf("Phy CTRL=0x%x \n",val); - - cpgmac_eth_phy_read(phy_addr,ANEG_ADVERTISE_REG,&val); -- // printf("Phy ANEG ADV=0x%x \n",val); - - cpgmac_eth_phy_read(phy_addr,ANEG_LPA_REG,&lpa_val); -- //printf("Phy ANEG LPA=0x%x \n",lpa_val); - - /* Speed doesn't matter, there is no setting for it in EMAC. */ - //if (tmp & GEN_PHY_STATUS_FD_MASK) { - if (lpa_val & (GEN_PHY_ANEG_100DUP | GEN_PHY_ANEG_10DUP ) ) { - /* set EMAC for Full Duplex */ -- // printf("Set MACCTRL for full duplex \n"); - adap_emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE | - EMAC_MACCONTROL_FULLDUPLEX_ENABLE; - } else { - /*set EMAC for Half Duplex */ - adap_emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE; -- // printf("Set MACCTRL for HALF duplex \n"); - } - - #ifdef CONFIG_DRIVER_TI_EMAC_USE_RMII - //if(tmp & GEN_PHY_STATUS_SPEED100_MASK) { - if (lpa_val & (GEN_PHY_ANEG_100DUP | GEN_PHY_ANEG_100TX ) ) { - adap_emac->MACCONTROL |= EMAC_MACCONTROL_RMIISPEED_100; -- // printf("Set maccontrol for RMII 100 - 0x%x\n",adap_emac->MACCONTROL); - - } else { - adap_emac->MACCONTROL &= ~EMAC_MACCONTROL_RMIISPEED_100; -- printf("Set maccontrol for RMII 10 - 0x%x\n",adap_emac->MACCONTROL); - } - #endif - -@@ -315,7 +303,7 @@ STATIC int gen_get_link_status(int phy_addr) - return(0); - } - --STATIC int gen_auto_negotiate(int phy_addr) -+static int gen_auto_negotiate(int phy_addr) - { - u_int16_t tmp,val; - unsigned long cntr =0; -@@ -323,55 +311,41 @@ STATIC int gen_auto_negotiate(int phy_addr) - if (!cpgmac_eth_phy_read(phy_addr, PHY_BMCR, &tmp)) - return(0); - -- printf("read BMCR 0x%x\n",tmp); - - val = tmp | GEN_PHY_CTRL_DUP | GEN_PHY_CTRL_ENA_ANEG | GEN_PHY_CTRL_SPD_SEL ; - cpgmac_eth_phy_write(phy_addr, PHY_BMCR, val); - cpgmac_eth_phy_read(phy_addr, PHY_BMCR, &val); -- printf("BMCR set to 0x%X \n",val); - - cpgmac_eth_phy_read(phy_addr,ANEG_ADVERTISE_REG, &val); -- printf("read ANEG 0x%x \n",val); - val |= ( GEN_PHY_ANEG_100DUP | GEN_PHY_ANEG_100TX | GEN_PHY_ANEG_10DUP | GEN_PHY_ANEG_10TX ); -- printf("writing back 0x%x \n",val); - cpgmac_eth_phy_write(phy_addr, ANEG_ADVERTISE_REG, val); - cpgmac_eth_phy_read(phy_addr,ANEG_ADVERTISE_REG, &val); -- printf("ANEG ADVT set to 0x%x \n", val); - - -- printf("Restart Auto-negn \n"); - cpgmac_eth_phy_read(phy_addr, PHY_BMCR, &tmp); - - /* Restart Auto_negotiation */ - tmp |= PHY_BMCR_RST_NEG; -- printf("writing bk 0x%x to BMCR for anegn \n",tmp); - cpgmac_eth_phy_write(phy_addr, PHY_BMCR, tmp); - - /*check AutoNegotiate complete */ -- //udelay (10000); - do{ - udelay(40000); - cntr++; -- }while(cntr < 150 ); -+ }while(cntr < 50 ); - - if (!cpgmac_eth_phy_read(phy_addr, PHY_BMSR, &tmp)) - return(0); -- printf("BMSR after negn 0x%X\n",tmp); - - cpgmac_eth_phy_read(phy_addr,MII_CTRL_REG,&val); -- printf("Phy CTRL=0x%x \n",val); - - cpgmac_eth_phy_read(phy_addr,ANEG_ADVERTISE_REG,&val); -- printf("Phy ANEG ADV=0x%x \n",val); - - cpgmac_eth_phy_read(phy_addr,ANEG_LPA_REG,&val); -- printf("Phy ANEG LPA=0x%x \n",val); - - cpgmac_eth_phy_read(phy_addr,ANEG_EXP_REG,&val); -- printf("Phy ANEG eXP=0x%x \n",val); - - cpgmac_eth_phy_read(phy_addr,SPL_VEND_REG,&val); -- printf("Phy SPL VEND =0x%x \n",val); - - if (!(tmp & PHY_BMSR_AUTN_COMP)) - return(0); -@@ -382,22 +356,19 @@ STATIC int gen_auto_negotiate(int phy_addr) - - - #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) --STATIC int cpgmac_mii_phy_read(char *devname, unsigned char addr, unsigned char reg, unsigned short *value) -+static int cpgmac_mii_phy_read(char *devname, unsigned char addr, unsigned char reg, unsigned short *value) - { -- printf("MII Phy read \n"); - return(cpgmac_eth_phy_read(addr, reg, value) ? 0 : 1); - } - --STATIC int cpgmac_mii_phy_write(char *devname, unsigned char addr, unsigned char reg, unsigned short value) -+static int cpgmac_mii_phy_write(char *devname, unsigned char addr, unsigned char reg, unsigned short value) - { - -- printf("MII Phy write \n"); - return(cpgmac_eth_phy_write(addr, reg, value) ? 0 : 1); - } - - int cpgmac_eth_miiphy_initialize(bd_t *bis) - { -- printf("MIIPHY initialize \n"); - miiphy_register(phy.name, cpgmac_mii_phy_read, cpgmac_mii_phy_write); - - return(1); -@@ -409,7 +380,7 @@ int cpgmac_eth_miiphy_initialize(bd_t *bis) - * EMAC modules power or pin multiplexors, that is done by board_init() - * much earlier in bootup process. Returns 1 on success, 0 otherwise. - */ --STATIC int cpgmac_eth_hw_init(void) -+static int cpgmac_eth_hw_init(void) - { - u_int32_t phy_id; - u_int16_t tmp; -@@ -490,7 +461,7 @@ STATIC int cpgmac_eth_hw_init(void) - - - /* Eth device open */ --STATIC int cpgmac_eth_open(void) -+static int cpgmac_eth_open(void) - { - dv_reg_p addr; - u_int32_t clkdiv, cnt; -@@ -603,7 +574,7 @@ STATIC int cpgmac_eth_open(void) - } - - /* EMAC Channel Teardown */ --STATIC void cpgmac_eth_ch_teardown(int ch) -+static void cpgmac_eth_ch_teardown(int ch) - { - dv_reg dly = 0xff; - dv_reg cnt; -@@ -646,7 +617,7 @@ STATIC void cpgmac_eth_ch_teardown(int ch) - } - - /* Eth device close */ --STATIC int cpgmac_eth_close(void) -+static int cpgmac_eth_close(void) - { - debug_emac("+ emac_close\n"); - -@@ -665,13 +636,13 @@ STATIC int cpgmac_eth_close(void) - return(1); - } - --STATIC int tx_send_loop = 0; -+static int tx_send_loop = 0; - - /* - * This function sends a single packet on the network and returns - * positive number (number of bytes transmitted) or negative for error - */ --STATIC int cpgmac_eth_send_packet (volatile void *packet, int length) -+static int cpgmac_eth_send_packet (volatile void *packet, int length) - { - int ret_status = -1; - tx_send_loop = 0; -@@ -704,8 +675,6 @@ STATIC int cpgmac_eth_send_packet (volatile void *packet, int length) - - /* Send the packet */ - adap_emac->TX0HDP = BD_TO_HW((unsigned int) emac_tx_desc); -- PRINTF("Send: BD=0x%X BF=0x%x len=%d \n", emac_tx_desc, emac_tx_desc->buffer, length); --// udelay(2500); - - /* Wait for packet to complete or link down */ - while (1) { -@@ -718,7 +687,6 @@ STATIC int cpgmac_eth_send_packet (volatile void *packet, int length) - #endif - if (adap_emac->TXINTSTATRAW & 0x01) { - ret_status = length; -- //PRINTF("Send Complete: BD=0x%X BF=0x%x len=%d \n", emac_tx_desc, emac_tx_desc->buffer, length); - break; - } - tx_send_loop++; -@@ -730,7 +698,7 @@ STATIC int cpgmac_eth_send_packet (volatile void *packet, int length) - /* - * This function handles receipt of a packet from the network - */ --STATIC int cpgmac_eth_rcv_packet (void) -+static int cpgmac_eth_rcv_packet (void) - { - volatile emac_desc *rx_curr_desc; - volatile emac_desc *curr_desc; -@@ -754,17 +722,14 @@ STATIC int cpgmac_eth_rcv_packet (void) - curr_desc = rx_curr_desc; - emac_rx_active_head = - (volatile emac_desc *) (HW_TO_BD(rx_curr_desc->next)); -- PRINTF("New Rx Active head 0x%x \n",emac_rx_active_head); - - - if (status & EMAC_CPPI_EOQ_BIT) { - if (emac_rx_active_head) { - adap_emac->RX0HDP = - BD_TO_HW((unsigned int) emac_rx_active_head); -- PRINTF("Rx EOQ reset HDP for misqueued pkt 0x%x \n",emac_rx_active_head); - } else { - emac_rx_queue_active = 0; -- PRINTF ("INFO:emac_rcv_packet: RX Queue not active\n"); - } - } - -@@ -774,19 +739,14 @@ STATIC int cpgmac_eth_rcv_packet (void) - rx_curr_desc->next = 0; - - if (emac_rx_active_head == 0) { -- // printf ("INFO: emac_rcv_pkt: active queue head = 0\n"); -- PRINTF(" Rx active head NULL, set head/tail to 0x%x",curr_desc); - emac_rx_active_head = curr_desc; - emac_rx_active_tail = curr_desc; - if (emac_rx_queue_active == 0) { - adap_emac->RX0HDP = - BD_TO_HW((unsigned int) emac_rx_active_head); -- //printf ("INFO: emac_rcv_pkt: active queue head = 0, HDP fired\n"); -- PRINTF("Rx Q inactive , set HDP to 0x%x \n", emac_rx_active_head); - emac_rx_queue_active = 1; - } - } else { -- PRINTF("Append 0x%x to tail \n", curr_desc); - tail_desc = emac_rx_active_tail; - emac_rx_active_tail = curr_desc; - tail_desc->next = BD_TO_HW((unsigned int) curr_desc); -@@ -795,7 +755,6 @@ STATIC int cpgmac_eth_rcv_packet (void) - status &= ~EMAC_CPPI_EOQ_BIT; - tail_desc->pkt_flag_len = status; - adap_emac->RX0HDP = BD_TO_HW((unsigned int) curr_desc); -- PRINTF("Restart the Q in tail append case\n"); - } - } - return (ret); --- -1.6.2.4 - |