diff options
Diffstat (limited to 'recipes/linux/linux-openmoko-2.6.30.4/015-mach-gta02.patch')
| -rw-r--r-- | recipes/linux/linux-openmoko-2.6.30.4/015-mach-gta02.patch | 86 |
1 files changed, 86 insertions, 0 deletions
diff --git a/recipes/linux/linux-openmoko-2.6.30.4/015-mach-gta02.patch b/recipes/linux/linux-openmoko-2.6.30.4/015-mach-gta02.patch new file mode 100644 index 0000000000..dae9ce6cbd --- /dev/null +++ b/recipes/linux/linux-openmoko-2.6.30.4/015-mach-gta02.patch @@ -0,0 +1,86 @@ +--- a/arch/arm/mach-s3c2442/Kconfig ++++ b/arch/arm/mach-s3c2442/Kconfig +@@ -25,6 +25,21 @@ config SMDK2440_CPU2442 + depends on ARCH_S3C2440 + select CPU_S3C2442 + ++config MACH_NEO1973_GTA02 ++ bool "Openmoko Freerunner GSM Phone (GTA02 Hardware)" ++ select CPU_S3C2442 ++ select MFD_PCF50633 ++ select PCF50633_GPIO ++ select I2C ++ select POWER_SUPPLY ++ select MACH_NEO1973 ++ select S3C_PWM ++ select FIQ ++ select S3C_DEV_USB_HOST ++ select S3C24XX_GPIO_EXTRA64 ++ help ++ Say Y here if you are using the Openmoko Freerunner GSM Phone ++ + + endmenu + +--- a/arch/arm/mach-s3c2442/Makefile ++++ b/arch/arm/mach-s3c2442/Makefile +@@ -9,8 +9,11 @@ obj-m := + obj-n := + obj- := + ++obj-$(CONFIG_S3C2440_C_FIQ) += fiq_c_isr.o ++ + obj-$(CONFIG_CPU_S3C2442) += s3c2442.o + obj-$(CONFIG_CPU_S3C2442) += clock.o ++obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o + + # Machine support + +--- a/arch/arm/mach-s3c2410/include/mach/irqs.h ++++ b/arch/arm/mach-s3c2410/include/mach/irqs.h +@@ -153,9 +153,9 @@ + #define IRQ_S3C2443_AC97 S3C2410_IRQSUB(28) + + #ifdef CONFIG_CPU_S3C2443 +-#define NR_IRQS (IRQ_S3C2443_AC97+1) ++#define _NR_IRQS (IRQ_S3C2443_AC97+1) + #else +-#define NR_IRQS (IRQ_S3C2440_AC97+1) ++#define _NR_IRQS (IRQ_S3C2440_AC97+1) + #endif + + /* compatibility define. */ +@@ -167,4 +167,33 @@ + /* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */ + #define FIQ_START IRQ_EINT0 + ++ ++/* ++ * The next 16 interrupts are for board specific purposes. Since ++ * the kernel can only run on one machine at a time, we can re-use ++ * these. If you need more, increase IRQ_BOARD_END, but keep it ++ * within sensible limits. ++ */ ++#define IRQ_BOARD_START _NR_IRQS ++#define IRQ_BOARD_END (_NR_IRQS + 10) ++ ++#if defined(CONFIG_MACH_NEO1973_GTA02) ++#define NR_IRQS (IRQ_BOARD_END) ++#else ++#define NR_IRQS (IRQ_BOARD_START) ++#endif ++ ++/* Neo1973 GTA02 interrupts */ ++#define NEO1973_GTA02_IRQ(x) (IRQ_BOARD_START + (x)) ++#define IRQ_GLAMO(x) NEO1973_GTA02_IRQ(x) ++#define IRQ_GLAMO_HOSTBUS IRQ_GLAMO(0) ++#define IRQ_GLAMO_JPEG IRQ_GLAMO(1) ++#define IRQ_GLAMO_MPEG IRQ_GLAMO(2) ++#define IRQ_GLAMO_MPROC1 IRQ_GLAMO(3) ++#define IRQ_GLAMO_MPROC0 IRQ_GLAMO(4) ++#define IRQ_GLAMO_CMDQUEUE IRQ_GLAMO(5) ++#define IRQ_GLAMO_2D IRQ_GLAMO(6) ++#define IRQ_GLAMO_MMC IRQ_GLAMO(7) ++#define IRQ_GLAMO_RISC IRQ_GLAMO(8) ++ + #endif /* __ASM_ARCH_IRQ_H */ |