diff options
Diffstat (limited to 'recipes/linux/linux-2.6.24/oxnas/oxnas-uart.patch')
-rw-r--r-- | recipes/linux/linux-2.6.24/oxnas/oxnas-uart.patch | 176 |
1 files changed, 0 insertions, 176 deletions
diff --git a/recipes/linux/linux-2.6.24/oxnas/oxnas-uart.patch b/recipes/linux/linux-2.6.24/oxnas/oxnas-uart.patch deleted file mode 100644 index e72b0db898..0000000000 --- a/recipes/linux/linux-2.6.24/oxnas/oxnas-uart.patch +++ /dev/null @@ -1,176 +0,0 @@ -diff -Nurd linux-2.6.24.org/arch/arm/configs/oxnas_810_eabi_dse_defconfig linux-2.6.24/arch/arm/configs/oxnas_810_eabi_dse_defconfig ---- linux-2.6.24.org/arch/arm/configs/oxnas_810_eabi_dse_defconfig 2009-02-05 12:06:15.000000000 +0100 -+++ linux-2.6.24/arch/arm/configs/oxnas_810_eabi_dse_defconfig 2009-02-05 12:08:36.000000000 +0100 -@@ -160,6 +160,8 @@ - # CONFIG_OXNAS_VERSION_0X850 is not set - # CONFIG_ARCH_OXNAS_UART1 is not set - CONFIG_ARCH_OXNAS_UART2=y -+CONFIG_ARCH_OXNAS_UART2_DEBUG=y -+CONFIG_ARCH_OXNAS_UART2_BOOTPROGRESS=y - # CONFIG_ARCH_OXNAS_UART2_MODEM is not set - # CONFIG_ARCH_OXNAS_UART3 is not set - # CONFIG_ARCH_OXNAS_PCI_REQGNT_0 is not set -diff -Nurd linux-2.6.24.org/arch/arm/configs/oxnas_810_eabi_upgrade_defconfig linux-2.6.24/arch/arm/configs/oxnas_810_eabi_upgrade_defconfig ---- linux-2.6.24.org/arch/arm/configs/oxnas_810_eabi_upgrade_defconfig 2009-02-05 12:06:15.000000000 +0100 -+++ linux-2.6.24/arch/arm/configs/oxnas_810_eabi_upgrade_defconfig 2009-02-05 12:08:36.000000000 +0100 -@@ -152,6 +152,8 @@ - # CONFIG_OXNAS_VERSION_0X850 is not set - # CONFIG_ARCH_OXNAS_UART1 is not set - CONFIG_ARCH_OXNAS_UART2=y -+CONFIG_ARCH_OXNAS_UART2_DEBUG=y -+CONFIG_ARCH_OXNAS_UART2_BOOTPROGRESS=y - # CONFIG_ARCH_OXNAS_UART2_MODEM is not set - # CONFIG_ARCH_OXNAS_UART3 is not set - # CONFIG_ARCH_OXNAS_PCI_REQGNT_0 is not set -diff -Nurd linux-2.6.24.org/arch/arm/configs/oxnas_810_eabi_wd_eval_defconfig linux-2.6.24/arch/arm/configs/oxnas_810_eabi_wd_eval_defconfig ---- linux-2.6.24.org/arch/arm/configs/oxnas_810_eabi_wd_eval_defconfig 2009-02-05 12:06:15.000000000 +0100 -+++ linux-2.6.24/arch/arm/configs/oxnas_810_eabi_wd_eval_defconfig 2009-02-05 12:08:36.000000000 +0100 -@@ -160,6 +160,8 @@ - # CONFIG_OXNAS_VERSION_0X850 is not set - # CONFIG_ARCH_OXNAS_UART1 is not set - CONFIG_ARCH_OXNAS_UART2=y -+CONFIG_ARCH_OXNAS_UART2_DEBUG=y -+CONFIG_ARCH_OXNAS_UART2_BOOTPROGRESS=y - # CONFIG_ARCH_OXNAS_UART2_MODEM is not set - # CONFIG_ARCH_OXNAS_UART3 is not set - # CONFIG_ARCH_OXNAS_UART4 is not set -diff -Nurd linux-2.6.24.org/arch/arm/configs/oxnas_810_eabi_wd_prod_defconfig linux-2.6.24/arch/arm/configs/oxnas_810_eabi_wd_prod_defconfig ---- linux-2.6.24.org/arch/arm/configs/oxnas_810_eabi_wd_prod_defconfig 2009-02-05 12:06:15.000000000 +0100 -+++ linux-2.6.24/arch/arm/configs/oxnas_810_eabi_wd_prod_defconfig 2009-02-05 12:08:36.000000000 +0100 -@@ -158,6 +158,8 @@ - # CONFIG_OXNAS_VERSION_0X850 is not set - # CONFIG_ARCH_OXNAS_UART1 is not set - CONFIG_ARCH_OXNAS_UART2=y -+CONFIG_ARCH_OXNAS_UART2_DEBUG=y -+CONFIG_ARCH_OXNAS_UART2_BOOTPROGRESS=y - # CONFIG_ARCH_OXNAS_UART2_MODEM is not set - # CONFIG_ARCH_OXNAS_UART3 is not set - # CONFIG_ARCH_OXNAS_UART4 is not set -diff -Nurd linux-2.6.24.org/arch/arm/mach-oxnas/Kconfig linux-2.6.24/arch/arm/mach-oxnas/Kconfig ---- linux-2.6.24.org/arch/arm/mach-oxnas/Kconfig 2009-02-05 12:06:15.000000000 +0100 -+++ linux-2.6.24/arch/arm/mach-oxnas/Kconfig 2009-02-05 12:08:34.000000000 +0100 -@@ -66,6 +66,20 @@ - UARTs will be mapped to ttySn numbers from UART1 to UART4, only - including those UARTs selected to be present - -+config ARCH_OXNAS_UART1_DEBUG -+ bool "Use UART1 as debug channel" -+ depends on ARCH_OXNAS_UART1 -+ default n -+ help -+ This enables UART1 to be usable as debug channel. -+ -+config ARCH_OXNAS_UART1_BOOTPROGRESS -+ bool "Display boot progress over UART1" -+ depends on ARCH_OXNAS_UART1 -+ default n -+ help -+ This enables displaying boot progress over UART1. -+ - config ARCH_OXNAS_UART1_MODEM - bool "Support UART1 modem control lines" - depends on ARCH_OXNAS_UART1 -@@ -81,6 +95,20 @@ - UARTs will be mapped to ttySn numbers from UART1 to UART4, only - including those UARTs selected to be present - -+config ARCH_OXNAS_UART2_DEBUG -+ bool "Use UART2 as debug channel" -+ depends on ARCH_OXNAS_UART2 -+ default n -+ help -+ This enables UART2 to be usable as debug channel. -+ -+config ARCH_OXNAS_UART2_BOOTPROGRESS -+ bool "Display boot progress over UART2" -+ depends on ARCH_OXNAS_UART2 -+ default n -+ help -+ This enables displaying boot progress over UART2. -+ - config ARCH_OXNAS_UART2_MODEM - bool "Support UART2 modem control lines" - depends on ARCH_OXNAS_UART2 -@@ -96,6 +124,20 @@ - UARTs will be mapped to ttySn numbers from UART1 to UART4, only - including those UARTs selected to be present - -+config ARCH_OXNAS_UART3_DEBUG -+ bool "Use UART3 as debug channel" -+ depends on ARCH_OXNAS_UART3 -+ default n -+ help -+ This enables UART3 to be usable as debug channel. -+ -+config ARCH_OXNAS_UART3_BOOTPROGRESS -+ bool "Display boot progress over UART3" -+ depends on ARCH_OXNAS_UART3 -+ default n -+ help -+ This enables displaying boot progress over UART3. -+ - config ARCH_OXNAS_UART3_MODEM - bool "Support UART3 modem control lines" - depends on ARCH_OXNAS_UART3 -@@ -114,6 +156,20 @@ - UART4 always has its modem control lines available on external pins - when selected (overlaying PCI functions) - -+config ARCH_OXNAS_UART4_DEBUG -+ bool "Use UART4 as debug channel" -+ depends on ARCH_OXNAS_UART4 -+ default n -+ help -+ This enables UART4 to be usable as debug channel. -+ -+config ARCH_OXNAS_UART4_BOOTPROGRESS -+ bool "Display boot progress over UART4" -+ depends on ARCH_OXNAS_UART4 -+ default n -+ help -+ This enables displaying boot progress over UART4. -+ - config ARCH_OXNAS_PCI_REQGNT_0 - bool "Enable req/gnt for PCI device 0" - depends on PCI -diff -Nurd linux-2.6.24.org/include/asm-arm/arch-oxnas/debug-macro.S linux-2.6.24/include/asm-arm/arch-oxnas/debug-macro.S ---- linux-2.6.24.org/include/asm-arm/arch-oxnas/debug-macro.S 2009-02-05 12:06:19.000000000 +0100 -+++ linux-2.6.24/include/asm-arm/arch-oxnas/debug-macro.S 2009-02-05 12:08:34.000000000 +0100 -@@ -14,13 +14,13 @@ - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? --#ifdef CONFIG_ARCH_OXNAS_UART1 -+#ifdef CONFIG_ARCH_OXNAS_UART1_DEBUG - ldreq \rx, =UART_1_BASE_PA @ physical base address - ldrne \rx, =UART_1_BASE @ virtual address --#elif CONFIG_ARCH_OXNAS_UART2 -+#elif CONFIG_ARCH_OXNAS_UART2_DEBUG - ldreq \rx, =UART_2_BASE_PA @ physical base address - ldrne \rx, =UART_2_BASE @ virtual address --#elif CONFIG_ARCH_OXNAS_UART3 -+#elif CONFIG_ARCH_OXNAS_UART3_DEBUG - ldreq \rx, =UART_3_BASE_PA @ physical base address - ldrne \rx, =UART_3_BASE @ virtual address - #else -diff -Nurd linux-2.6.24.org/include/asm-arm/arch-oxnas/uncompress.h linux-2.6.24/include/asm-arm/arch-oxnas/uncompress.h ---- linux-2.6.24.org/include/asm-arm/arch-oxnas/uncompress.h 2009-02-05 12:06:19.000000000 +0100 -+++ linux-2.6.24/include/asm-arm/arch-oxnas/uncompress.h 2009-02-05 12:08:34.000000000 +0100 -@@ -12,13 +12,13 @@ - - static inline void putc(int c) - { --#ifdef CONFIG_ARCH_OXNAS_UART1 -+#ifdef CONFIG_ARCH_OXNAS_UART1_BOOTPROGRESS - static volatile unsigned char* uart = (volatile unsigned char*)UART_1_BASE_PA; --#elif defined(CONFIG_ARCH_OXNAS_UART2) -+#elif defined(CONFIG_ARCH_OXNAS_UART2_BOOTPROGRESS) - static volatile unsigned char* uart = (volatile unsigned char*)UART_2_BASE_PA; --#elif defined(CONFIG_ARCH_OXNAS_UART3) -+#elif defined(CONFIG_ARCH_OXNAS_UART3_BOOTPROGRESS) - static volatile unsigned char* uart = (volatile unsigned char*)UART_3_BASE_PA; --#elif defined(CONFIG_ARCH_OXNAS_UART4) -+#elif defined(CONFIG_ARCH_OXNAS_UART4_BOOTPROGRESS) - static volatile unsigned char* uart = (volatile unsigned char*)UART_4_BASE_PA; - #else - #define NO_UART |