diff options
Diffstat (limited to 'conf/machine/babbage.conf')
-rw-r--r-- | conf/machine/babbage.conf | 42 |
1 files changed, 42 insertions, 0 deletions
diff --git a/conf/machine/babbage.conf b/conf/machine/babbage.conf new file mode 100644 index 0000000000..5409e720e8 --- /dev/null +++ b/conf/machine/babbage.conf @@ -0,0 +1,42 @@ +#@TYPE: Machine +#@NAME: Freescale i.MX51 Babbage +#@DESCRIPTION: Machine configuration for the Babbage board +#@URL: http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=i.MX515 +TARGET_ARCH = "arm" + +PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg" +XSERVER = "xserver-xorg \ + xf86-input-evdev \ + xf86-input-mouse \ + xf86-input-keyboard" + +# Only has DVI connector for external screen +GUI_MACHINE_CLASS = "bigscreen" + +require conf/machine/include/imx51.inc + +PREFERRED_PROVIDER_virtual/kernel = "linux" +PREFFERED_PROVIDER_virtual/bootloader = "u-boot" + +UBOOT_MACHINE = "mx51_bbg_config" + +IMAGE_FSTYPES += "tar.bz2 ubi" +EXTRA_IMAGECMD_jffs2 = "-lnp " + +SERIAL_CONSOLE = "115200 ttymxc0" + +MACHINE_FEATURES = "kernel26 screen apm usbhost vfat alsa" + +# The board expects the bootloader to be at offset 0x400 of SD-CARd in the bottom slot. +# The generated u-boot.bin is zero-padded from offset 0x000 to offset 0x400. +# +# You may flash it using a command like : +# # dd if=/u-boot.bin of=/dev/sdX +# +# Alternatively, if you want to keep your partition table intact, you can use +# something like : +# # dd if=/u-boot.bin of=/dev/sdX bs=512 seek=2 skip=2 +# +# Note that both of these commands will destroy any filesystem present on the +# sectors u-boot will be written. Please Consider creating your partition +# table accordingly. |