rename packages/ to recipes/ per earlier agreement

See links below for more details:
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21326
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21816

Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Acked-by: Mike Westerhof <mwester@dls.net>
Acked-by: Philip Balister <philip@balister.org>
Acked-by: Khem Raj <raj.khem@gmail.com>
Acked-by: Marcin Juszkiewicz <hrw@openembedded.org>
Acked-by: Koen Kooi <koen@openembedded.org>
Acked-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>

8 files changed, 0 insertions, 1358 deletions

diff --git a/packages/omniorb/files/arm_double.patch b/packages/omniorb/files/arm_double.patch
deleted file mode 100644
index cfcfd41630..0000000000
--- a/packages/omniorb/files/arm_double.patch
+++ /dev/null
@@ -1,266 +0,0 @@
---- include/omniORB4/CORBA_sysdep.h	30 Dec 2005 17:40:22 -0000	1.2.2.32
-+++ include/omniORB4/CORBA_sysdep.h	12 Apr 2006 16:55:41 -0000
-@@ -125,6 +125,15 @@
- #endif
- 
- //
-+// Processor dependencies
-+//
-+
-+#if defined(__arm__)
-+#  define OMNI_MIXED_ENDIAN_DOUBLE
-+#endif
-+
-+
-+//
- // Macro to provide const_cast functionality on all platforms.
- //
- #ifdef HAS_Cplusplus_const_cast
---- include/omniORB4/cdrStream.h	22 Jul 2005 16:57:17 -0000	1.1.2.23
-+++ include/omniORB4/cdrStream.h	12 Apr 2006 16:55:41 -0000
-@@ -428,6 +428,13 @@
-       m.l[1] = Swap32(l.l[0]);
-       l = m;
-     }
-+#ifdef OMNI_MIXED_ENDIAN_DOUBLE
-+    {
-+      _CORBA_ULong v = l.l[0];
-+      l.l[0] = l.l[1];
-+      l.l[1] = v;
-+    }
-+#endif
-     CdrMarshal(s,LongArray2,omni::ALIGN_8,l);
-   }
- 
-@@ -440,6 +447,13 @@
-       m.l[1] = Swap32(l.l[0]);
-       l = m;
-     }
-+#ifdef OMNI_MIXED_ENDIAN_DOUBLE
-+    {
-+      _CORBA_ULong v = l.l[0];
-+      l.l[0] = l.l[1];
-+      l.l[1] = v;
-+    }
-+#endif
-     convertToFloat(_CORBA_Double, LongArray2);
-   }
- #else
-@@ -791,6 +805,19 @@
-         p[i] = l;
-       }
-     }
-+#ifdef OMNI_MIXED_ENDIAN_DOUBLE
-+    {
-+      struct LongArray2 {
-+        _CORBA_ULong l[2];
-+      };
-+      LongArray2* p=(LongArray2*)a;
-+      for( int i = 0; i < length; i++ ) {
-+        _CORBA_ULong v = p[i].l[0];
-+	p[i].l[0] = p[i].l[1];
-+	p[i].l[1] = v;
-+      }
-+    }
-+#endif
-   }
- #endif
- 
-@@ -957,6 +984,13 @@
-     m.l[1] = Swap32(l.l[0]);
-     l = m;
-   }
-+#ifdef OMNI_MIXED_ENDIAN_DOUBLE
-+  {
-+    _CORBA_ULong v = l.l[0];
-+    l.l[0] = l.l[1];
-+    l.l[1] = v;
-+  }
-+#endif
-   CdrMarshal(s,LongArray2,omni::ALIGN_8,l);
- }
- 
-@@ -969,6 +1003,13 @@
-     m.l[1] = Swap32(l.l[0]);
-     l = m;
-   }
-+#ifdef OMNI_MIXED_ENDIAN_DOUBLE
-+  {
-+    _CORBA_ULong v = l.l[0];
-+    l.l[0] = l.l[1];
-+    l.l[1] = v;
-+  }
-+#endif
-   convertToFloat(_CORBA_Double, LongArray2);
- }
- 
---- include/omniORB4/seqTemplatedecls.h	11 Oct 2005 13:17:01 -0000	1.1.2.10
-+++ include/omniORB4/seqTemplatedecls.h	12 Apr 2006 16:55:42 -0000
-@@ -544,43 +544,6 @@
- };
- 
- 
--
--//////////////////////////////////////////////////////////////////////
--///////////// _CORBA_Sequence_w_FixSizeElement           /////////////
--//////////////////////////////////////////////////////////////////////
--template <class T,int elmSize,int elmAlignment>
--class _CORBA_Sequence_w_FixSizeElement : public _CORBA_Sequence<T> {
--protected:
--  typedef _CORBA_Sequence_w_FixSizeElement<T,elmSize,elmAlignment>  T_seq;
--  typedef _CORBA_Sequence<T> Base_T_seq ;
--
--
--  inline _CORBA_Sequence_w_FixSizeElement() {}
--
--  inline _CORBA_Sequence_w_FixSizeElement(_CORBA_ULong max,
--					  _CORBA_Boolean bounded=0) :
--    Base_T_seq(max,bounded) {}
--
--  inline _CORBA_Sequence_w_FixSizeElement(const T_seq& s) : Base_T_seq(s) {}
--
--  inline _CORBA_Sequence_w_FixSizeElement(_CORBA_ULong max,
--					  _CORBA_ULong len,
--					  T           *value,
--					  _CORBA_Boolean release_ = 0,
--					  _CORBA_Boolean bounded = 0
--	       )  : Base_T_seq(max,len,value,release_,bounded) {}
--
--  inline T_seq &operator= (const T_seq &s) {
--    Base_T_seq::operator= (s);
--    return *this;
--  }
--
--public:
--  inline void operator>>= (cdrStream &s) const;
--  inline void operator<<= (cdrStream &s);
--};
--
--
- //////////////////////////////////////////////////////////////////////
- ///////////// _CORBA_Unbounded_Sequence_w_FixSizeElement /////////////
- //////////////////////////////////////////////////////////////////////
-@@ -663,6 +626,46 @@
- };
- 
- 
-+#ifdef OMNI_MIXED_ENDIAN_DOUBLE
-+
-+template <int max>
-+class _CORBA_Bounded_Sequence_w_FixSizeElement<_CORBA_Double,max,8,8> : 
-+  public _CORBA_Bounded_Sequence<_CORBA_Double,max> {
-+public:
-+  typedef _CORBA_Bounded_Sequence_w_FixSizeElement<_CORBA_Double,max,8,8> T_seq;
-+  typedef _CORBA_Bounded_Sequence<_CORBA_Double,max> Base_T_seq;
-+
-+
-+  inline _CORBA_Bounded_Sequence_w_FixSizeElement() {}
-+  inline _CORBA_Bounded_Sequence_w_FixSizeElement(_CORBA_ULong   len,
-+						  _CORBA_Double  *value,
-+						  _CORBA_Boolean rel = 0) : 
-+    Base_T_seq(len,value,rel) {}
-+
-+  inline _CORBA_Bounded_Sequence_w_FixSizeElement(const T_seq& s) : 
-+    Base_T_seq(s) {}
-+
-+  inline ~_CORBA_Bounded_Sequence_w_FixSizeElement() {}
-+
-+  inline T_seq& operator=(const T_seq& s) {
-+    Base_T_seq::operator= (s);
-+    return *this;
-+  }
-+
-+  // CORBA 2.3 additions
-+
-+  inline void replace(_CORBA_ULong len, _CORBA_Double* data,_CORBA_Boolean release_ = 0) {
-+    Base_T_seq::replace(len,data,release_);
-+  }
-+
-+  inline void operator>>= (cdrStream &s) const;
-+  inline void operator<<= (cdrStream &s);
-+};
-+
-+#endif
-+
-+
-+
- //////////////////////////////////////////////////////////////////////
- ////////////////// _CORBA_Sequence_Char  /////////////////////////////
- //////////////////////////////////////////////////////////////////////
---- include/omniORB4/seqTemplatedefns.h	22 May 2003 13:41:39 -0000	1.1.2.11
-+++ include/omniORB4/seqTemplatedefns.h	12 Apr 2006 16:55:42 -0000
-@@ -266,6 +266,48 @@
- }
- 
- //////////////////////////////////////////////////////////////////////
-+#ifdef OMNI_MIXED_ENDIAN_DOUBLE
-+
-+// Template member function specializations to use the base
-+// marshalling functions for double, so the doubles are properly
-+// word-swapped.
-+
-+template<>
-+inline
-+void
-+_CORBA_Unbounded_Sequence_w_FixSizeElement<_CORBA_Double,8,8>::operator>>= (cdrStream& s) const
-+{
-+  Base_T_seq::operator>>=(s);
-+}
-+
-+template<>
-+inline
-+void
-+_CORBA_Unbounded_Sequence_w_FixSizeElement<_CORBA_Double,8,8>::operator<<= (cdrStream& s)
-+{
-+  Base_T_seq::operator<<=(s);
-+}
-+
-+template<int max>
-+inline
-+void
-+_CORBA_Bounded_Sequence_w_FixSizeElement<_CORBA_Double,max,8,8>::operator>>= (cdrStream& s) const
-+{
-+  Base_T_seq::operator>>=(s);
-+}
-+
-+template<int max>
-+inline
-+void
-+_CORBA_Bounded_Sequence_w_FixSizeElement<_CORBA_Double,max,8,8>::operator<<= (cdrStream& s)
-+{
-+  Base_T_seq::operator<<=(s);
-+}
-+
-+#endif
-+
-+
-+//////////////////////////////////////////////////////////////////////
- inline
- void
- _CORBA_Sequence_Char::operator>>= (cdrStream& s) const
---- src/lib/omniORB/omniidl_be/cxx/skutil.py	27 Jul 2003 19:24:32 -0000	1.17.2.10
-+++ src/lib/omniORB/omniidl_be/cxx/skutil.py	12 Apr 2006 16:55:42 -0000
-@@ -197,6 +197,11 @@
-         if array_marshal_helpers.has_key(d_type.type().kind()):
-             (alignment,elmsize) = array_marshal_helpers[d_type.type().kind()]
-             if alignment != "omni::ALIGN_1":
-+                is_double = d_type.type().kind() == idltype.tk_double
-+                if is_double:
-+                    to.out("""
-+#ifndef OMNI_MIXED_ENDIAN_DOUBLE""")
-+
-                 to.out("""\
- if (! @where@.marshal_byte_swap()) {
-   @where@.put_octet_array((CORBA::Octet*)(@slice_cast@@name@),@num@,@align@);
-@@ -207,6 +212,11 @@
-                        slice_cast = slice_cast,
-                        num = str(n_elements * elmsize),
-                        align = alignment)
-+
-+                if is_double:
-+                    to.out("""\
-+#endif""")
-+
-                 # Do not return here.
-                 # let the code below to deal with the else block.
-             else:
diff --git a/packages/omniorb/files/dynskel.patch b/packages/omniorb/files/dynskel.patch
deleted file mode 100644
index 469d3eb45e..0000000000
--- a/packages/omniorb/files/dynskel.patch
+++ /dev/null
@@ -1,49 +0,0 @@
---- src/lib/omniORB/omniidl_be/cxx/dynskel/main.py	27 Nov 2001 14:37:25 -0000	1.14.2.10
-+++ src/lib/omniORB/omniidl_be/cxx/dynskel/main.py	15 May 2006 13:36:20 -0000
-@@ -474,15 +474,30 @@
- 
-     elementDesc = output.StringStream()
-     prefix = config.state['Private Prefix']
-+
-     # djr and jnw's "Super-Hacky Optimisation"
-     # (amended by dpg1 to be even more hacky, since char/wchar now don't work)
--    if isinstance(d_seqType.type(), idltype.Base) and \
--       not d_seqType.variable() and \
--       not d_seqType.type().kind() in [idltype.tk_char, idltype.tk_wchar] and \
--       not is_array:
-+    # (amended again to cope with mixed endian doubles)
-+
-+    is_double     = d_seqType.type().kind() == idltype.tk_double
-+    is_contiguous = (isinstance(d_seqType.type(), idltype.Base) and
-+                     not d_seqType.variable() and
-+                     not d_seqType.type().kind() in [idltype.tk_char,
-+                                                     idltype.tk_wchar] and
-+                     not is_array)
-+
-+    if is_double:
-+        elementDesc.out("""
-+#ifndef OMNI_MIXED_ENDIAN_DOUBLE""")
-+        
-+    if is_contiguous:
-         elementDesc.out(template.sequence_elementDesc_contiguous,
-                         sequence = sequence_desc)
--    else:
-+    if is_double:
-+        elementDesc.out("""
-+#else""")
-+    
-+    if is_double or not is_contiguous:
-         # <---
-         required_symbols = [ prefix + "_buildDesc" + seqType_cname ]
-         assertDefined(required_symbols)
-@@ -492,6 +507,10 @@
-                         thing_cname = seqType_cname,
-                         thing = thing)
- 
-+    if is_double:
-+        elementDesc.out("""
-+#endif""")
-+
-     # <---
-     cname = memberType_cname
-     # this is the #ifdef guard
diff --git a/packages/omniorb/files/omniORB-cross.patch b/packages/omniorb/files/omniORB-cross.patch
deleted file mode 100644
index 3206af2b7a..0000000000
--- a/packages/omniorb/files/omniORB-cross.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-*** omniORB-4.0.5/mk/beforeauto.mk.in   2004-10-17 20:44:56.000000000 -0400
---- omniORB-4.0.5.new/mk/beforeauto.mk.in       2005-03-21 12:33:05.756947025 -0500
-***************
-*** 48,59 ****
-  #
-  # Tool bindir to use depends on make target
-  #
-  ifeq ($(MAKECMDGOALS),install)
-    TOOLBINDIR = $(INSTALLBINDIR)
-  else
-    TOOLBINDIR = $(TOP)/$(BINDIR)
-  endif
-!
-
-  #############################################################################
-  #
---- 48,60 ----
-  #
-  # Tool bindir to use depends on make target
-  #
-+ ifndef TOOLBINDIR
-  ifeq ($(MAKECMDGOALS),install)
-    TOOLBINDIR = $(INSTALLBINDIR)
-  else
-    TOOLBINDIR = $(TOP)/$(BINDIR)
-  endif
-! endif
-
-  #############################################################################
-  #
-
diff --git a/packages/omniorb/files/omniORB.cfg b/packages/omniorb/files/omniORB.cfg
deleted file mode 100644
index c1c8c24f95..0000000000
--- a/packages/omniorb/files/omniORB.cfg
+++ /dev/null
@@ -1,918 +0,0 @@
-############################################################################
-#           omniORB (4.0 or above) configuration file                      #
-############################################################################
-
-############################################################################
-############################################################################
-############################################################################
-#                                                                          #
-#            ORB wide options                                              #
-#                                                                          #
-############################################################################
-
-############################################################################
-# Tracing level
-#     level 0 -  critical errors only
-#     level 1 -  informational messages only
-#     level 2 -  configuration information and warnings
-#     level 5 -  the above plus report server thread creation and
-#                communication socket shutdown
-#     level 10 - the above plus execution trace messages
-#     level 25 - output trace message per send or receive giop message
-#     level 30 - dump up to 128 bytes of a giop message
-#     level 40 - dump the complete giop message
-#
-#     Valid values = (n >= 0)
-#
-
-#traceLevel = 1
-
-############################################################################
-# Trace Exceptions
-#     If true, then system exceptions will be logged when they are thrown.
-#
-#     Valid values = 0 or 1
-#
-traceExceptions = 0
-
-############################################################################
-# Trace Invocations
-#     If true, then each local and remote invocation will generate a trace 
-#     message.
-#
-#     Valid values = 0 or 1
-#
-traceInvocations = 0
-
-############################################################################
-# Trace thread id
-#     If true, all trace messages include the thread id of the thread doing
-#     the logging.
-#
-#     Valid values = 0 or 1
-#
-traceThreadId = 0
-
-############################################################################
-# dumpConfiguration
-#     Set to 1 to cause the ORB to dump the current set of configuration
-#     parameters.
-#
-#     Valid values = 0 or 1
-#
-dumpConfiguration = 0
-
-############################################################################
-# maxGIOPVersion
-#
-#   Set the maximum GIOP version the ORB should support. The ORB tries
-#   to match the <major>.<minor> version as specified.
-#
-#   Valid values = 1.0 | 1.1 | 1.2
-#
-maxGIOPVersion = 1.2
-
-############################################################################
-# giopMaxMsgSize
-#
-#    This value defines the ORB-wide limit on the size of GIOP message 
-#    (excluding the header). If this limit is exceeded, the ORB will
-#    refuse to send or receive the message and raise a MARSHAL exception.
-#
-#    Valid values = (n >= 8192)
-#
-giopMaxMsgSize = 2097152    # 2 MBytes.
-
-############################################################################
-# strictIIOP flag
-#    Enable vigorous check on incoming IIOP messages
-#
-#    In some (sloppy) IIOP implementations, the message size value in
-#    the header can be larger than the actual body size, i.e. there is
-#    garbage at the end. As the spec does not say the message size
-#    must match the body size exactly, this is not a clear violation
-#    of the spec.
-#
-#    If this flag is non-zero, the incoming message is expected to
-#    be well-behaved. Any messages that have garbage at the end will
-#    be rejected.
-#    
-#    The default value of this flag is true, so invalid messages are
-#    rejected. If you set it to zero, the ORB will silently skip the
-#    unread part. The problem with this behaviour is that the header
-#    message size may actually be garbage, caused by a bug in the
-#    sender's code. The receiving thread may block forever on the
-#    strand as it tries to read more data from it. In this case the
-#    sender won't send any more as it thinks it has marshalled in all
-#    the data.
-#
-#    Valid values = 0 or 1
-#
-strictIIOP = 1
-
-############################################################################
-# lcdMode
-#
-#   Set to 1 to enable 'Lowest Common Denominator' Mode.
-#   This will disable various features of IIOP and GIOP which are
-#   poorly supported by some ORBs, and disable warnings/errors when
-#   certain types of erroneous message are received on the wire.
-#
-#   Valid values = 0 or 1
-#
-lcdMode = 0
-
-############################################################################
-# tcAliasExpand flag
-#
-#    This flag is used to indicate whether TypeCodes associated with Anys
-#    should have aliases removed. This functionality is included because
-#    some ORBs will not recognise an Any containing a TypeCode with
-#    aliases to be the same as the actual type contained in the Any. Note
-#    that omniORB will always remove top-level aliases, but will not remove
-#    aliases from TypeCodes that are members of other TypeCodes (e.g.
-#    TypeCodes for members of structs etc.), unless tcAliasExpand is set to 1.
-#    There is a performance penalty when inserting into an Any if 
-#    tcAliasExpand is set to 1. The default value is 0 (i.e. aliases of
-#    member TypeCodes are not expanded). Note that aliases won't be expanded
-#    when one of the non-type-safe methods of inserting into an Any is
-#    used (i.e. when the replace() member function or non - type-safe Any
-#    constructor is used. )
-#
-#     Valid values = 0 or 1
-#
-tcAliasExpand = 0
-
-############################################################################
-# useTypeCodeIndirections
-#
-#    If true (the default), typecode indirections will be used. Set
-#    this to false to disable that. Setting this to false might be
-#    useful to interoperate with another ORB implementation that cannot
-#    handle indirections properly.
-#   
-#    Valid values = 0 or 1
-useTypeCodeIndirections = 1
-
-############################################################################
-# acceptMisalignedTcIndirections
-#
-#    If true, try to fix a mis-aligned indirection in a typecode. This
-#    is used to work around a bug in some versions of Visibroker's Java
-#    ORB.
-#   
-#    Valid values = 0 or 1
-acceptMisalignedTcIndirections = 0
-
-############################################################################
-# scanGranularity
-#
-#   The granularity at which the ORB scans for idle connections.
-#   This value determines the minimum value that inConScanPeriod or
-#   outConScanPeriod can be.
-#
-#   Valid values = (n >= 0 in seconds) 
-#                   0 --> do not scan for idle connections.
-#
-scanGranularity = 5
-
-############################################################################
-# nativeCharCodeSet
-#
-#   set the native code set for char and string
-#
-nativeCharCodeSet = ISO-8859-1
-
-############################################################################
-# nativeWCharCodeSet
-#
-#   set the native code set for wchar and wstring
-#
-nativeWCharCodeSet = UTF-16
-
-############################################################################
-# omniORB_27_CompatibleAnyExtraction
-#
-#   In omniORB pre-2.8.0 versions, the CORBA::Any extraction operator for
-#     1. unbounded string operator>>=(char*&)
-#     2. bounded string   operator>>=(to_string)
-#     3. object reference operator>>=(A_ptr&) for interface A
-#   Return a copy of the value. The caller must free the returned
-#   value later.
-#
-#   With 2.8.0 and later, the semantics becomes non-copy, i.e. the Any
-#   still own the storage of the returned value.
-#   This would cause a problem in a program that is written to use the
-#   pre-2.8.0 semantics. To make it easier for the transition,
-#   set omniORB_27_CompatibleAnyExtraction to 1.
-#   This would revert the semantics to the pre-2.8.0 versions.
-#
-#   Valid values = 0 or 1
-#
-omniORB_27_CompatibleAnyExtraction = 0
-
-############################################################################
-# abortOnInternalError
-#
-#   If the value of this variable is TRUE then the ORB will abort
-#   instead of throwing an exception when a fatal internal error is
-#   detected. This is useful for debuging the ORB -- as the stack will
-#   not be unwound by the exception handler, so a stack trace can be
-#   obtained.
-#   It is hoped that this will not often be needed by users of omniORB!
-#
-#   Valid values = 0 or 1
-#
-abortOnInternalError = 0
-
-############################################################################
-# abortOnNativeException
-#
-#   On Windows, "native" exceptions such as segmentation faults and
-#   divide by zero appear as C++ exceptions that can be caught with
-#   catch (...). Setting this parameter to TRUE causes such exceptions
-#   to abort the process instead.
-#
-#   This parameter has no effect on other platforms.
-#
-#   Valid values = 0 or 1
-#
-abortOnNativeException = 0
-
-############################################################################
-# maxSocketSend
-# maxSocketRecv
-#
-#   On some platforms, calls to send() and recv() have a limit on the
-#   buffer size that can be used. These parameters set the limits in
-#   bytes that omniORB uses when sending / receiving bulk data.
-#
-#   The default values are platform specific. It is unlikely that you
-#   will need to change the values from the defaults.
-#
-#   The minimum valid limit is 8KB, 8192 bytes.
-#
-#   e.g. to limit to 64KB sends / receives:
-#
-#     maxSocketSend = 65536
-#     maxSocketRecv = 65536
-
-############################################################################
-# sslCAFile
-# sslKeyFile
-# sslKeyPassword
-# sslVerifyMode
-#
-#   SSL transport options
-#
-#   sslCAFile specifies the file containing the SSL Certificate
-#   Authority certificate.
-#
-#   sslKeyFile specifies the file containing the SSL key.
-#
-#   sslKeyPassword specifies the password to unlock the key.
-#
-#   sslVerifyMode specifies the verify mode, as given to
-#   SSL_CTX_set_verify. Valid values are "none", representing
-#   SSL_VERIFY_NONE, and "peer", representing SSL_VERIFY_PEER. If peer
-#   is selected, additional options "fail" and "once" can also be
-#   specified, corresponding to SSL_VERIFY_FAIL_IF_NO_PEER_CERT and
-#   SSL_VERIFY_CLIENT_ONCE respectively. e.g.
-#
-#     sslVerifyMode = peer,fail
-#
-#   These options are only available if the SSL transport is linked.
-
-
-############################################################################
-############################################################################
-############################################################################
-#                                                                          #
-#            Client Side Options                                           #
-#                                                                          #
-############################################################################
-
-############################################################################
-# InitRef
-#
-#   Specify the objects the ORB should return in response to calls to
-#   resolve_initial_references.
-#
-#   There can be more than one configuration line defining InitRef.
-#   Each line adds one initial reference to the ORB.
-#
-#   Here are some valid examples:
-#
-#   Specify the root context of the Naming Service. (Notice the end of line
-#   continuation marker '\'
-#
-#   InitRef = NameService=IOR:010000002800000049444c3a6f6d672e6f72672f436f734\
-#e616d696e672f4e616d696e67436f6e746578743a312e300001000000000000002c000000010\
-#102000c0000003139322e3136382e312e3000f90a00000c000000349568c45cb1e6780000000\
-#100000000
-#
-#   Alternatively, and more cleanly, specify the Naming service with a
-#   corbaname URI:
-#
-InitRef = NameService=corbaname::localhost
-#
-#
-#   Specify the Trading service and the interface repository using corbaloc:
-#
-#   InitRef = TradingService=corbaloc:iiop:marrow:5009/MyObjectKey
-#           = InterfaceRepository=corbaloc::1.2@marrow:5009/Intf
-#
-#   The default for the set of initial references is empty.
-
-############################################################################
-# DefaultInitRef
-#
-#   DefaultInitRef provides a prefix string which is used to resolve 
-#   otherwise unknown names. When resolve_initial_references() is unable to 
-#   resolve a name which has been specifically configured (with InitRef),
-#   it constructs a string consisting of the default prefix, a `/' character,
-#   and the name requested. The string is then fed to string_to_object().
-#   For example, if DefaultInitRef is set up like this:
-#      DefaultInitRef = corbaloc::myhost.example.com
-#   A call to resolve_initial_references("MyService") will return the object
-#   reference denoted by `corbaloc::myhost.example.com/MyService'.
-#
-#   The default is empty.
-
-
-############################################################################
-# clientTransportRule
-#
-#    When the client receives an IOR that defines 1 or more ways to contact
-#    the server, the rules in clientTransportRule filter and prioritise
-#    the order in which the transports are used. 
-#
-#    There can be more than one configuration line of this type.
-#    Each line adds one rule to the selection process. The rules are applied
-#    in the order they are defined. The relative positions of the rules define
-#    the relative priority. The first rule has the highest priority.
-#
-#    The syntax of a rule is as follows:
-#    clientTransportRule =  [^]<address mask>      [action]+
-#
-#        <address mask> can be:
-#            1. localhost            the address is this machine
-#            2. w.x.y.z/m1.m2.m3.m4  IPv4 address with the bits selected by
-#                                    the mask. e.g. 172.16.0.0/255.240.0.0
-#            3. *                    the wildcard that matches any address
-#
-#        <action>+ can be one or more of the following:
-#            1. none              Do not use this address
-#            2. tcp,ssl,unix      Use the 3 transports in the specified order 
-#                                 if any or all of them are available
-#            3. bidir             Any connection to this address should be
-#                                 used bidirectionally.
-#
-#         The optional prefix ^ before <address mask>, if present, causes
-#         the ORB to remove previously declared clientTransportRules from
-#         its internal store before adding the current rule.
-#
-#    By default, no rule is defined. The ORB implicitly uses the following
-#    rule:
-#        clientTransportRule =     *   unix,tcp,ssl
-#    If any rule is specified, no implicit rule will be applied.
-#
-#    Given an IOR, for each of the addresses within it, the ORB matches the
-#    address to the rules. If one is found, the position of the matched rule
-#    and the action is noted. If the action is none, the address is discarded.
-#    If the action does not contain the transport the address is specified for,
-#    e.g. the action is "ssl" but the address is "tcp", the address is 
-#    discarded. Otherwise, the address and action is entered as one of the
-#    candidates to use. Having gone through all the addresses, the candidiates
-#    available are then ordered based on the priority of the matching rules and
-#    used accordingly.
-#
-#    Here are some example usages:
-#
-#    A) Restrict to only contacting server on the same host:
-#           clientTransportRule = localhost      unix,tcp
-#                               =   *            none
-#    B) Use tcp to contact servers in the intranet and must use bidirectional
-#       ssl otherwise.
-#           clientTransportRule = 172.16.0.0/255.240.0.0  unix,tcp
-#                               =            *            bidir,ssl
-#    C) When a fast network (192.168.1.0) exists in the cluster, use it in
-#       preference to the external network.
-#           clientTransportRule = 192.168.1.0/255.255.255.0  unix,tcp
-#           clientTransportRule = 172.16.0.0/255.240.0.0     unix,tcp
-#                               =       *                    none
-#     
-#             
-
-############################################################################
-# clientCallTimeOutPeriod
-#
-#    Call timeout. On the client side, if a remote call takes longer
-#    than the timeout value, the ORB will shutdown the connection and
-#    raise a COMM_FAILURE.
-#
-#    Valid values = (n >= 0 in milliseconds) 
-#                    0 --> no timeout. Block till a reply comes back
-#
-clientCallTimeOutPeriod = 0
-
-############################################################################
-# supportPerThreadTimeOut
-#
-#    If true, each client thread may have its own timeout. This adds
-#    some overhead to each call, so it is off by default.
-#
-#    Valid values = 0 or 1
-#
-supportPerThreadTimeOut = 0
-
-############################################################################
-# outConScanPeriod
-#
-#   Idle connections shutdown. The ORB periodically scans all the
-#   outgoing connections to detect if they are idle.
-#   If no operation has passed through a connection for a scan period,
-#   the ORB would treat this connection idle and shut it down.
-#
-#   Valid values = (n >= 0 in seconds) 
-#                   0 --> do not close idle connections.
-#
-outConScanPeriod = 120
-
-############################################################################
-# maxGIOPConnectionPerServer
-#
-#   The ORB could open more than one connection to a server
-#   depending on the number of concurrent invocations to the same
-#   server. This variable decides the maximum number of connections 
-#   to use per server. This variable is read only once at ORB_init.
-#   If the number of concurrent invocations exceeds this number, the
-#   extra invocations are blocked until the the outstanding ones
-#   return.
-#
-#   Valid values = (n >= 1) 
-#
-maxGIOPConnectionPerServer = 5
-
-############################################################################
-# oneCallPerConnection
-#
-#   1 means only one call can be in progress at any time per connection.
-#
-#   Valid values = 0 or 1
-#
-oneCallPerConnection = 1
-
-############################################################################
-# offerBiDirectionalGIOP
-#
-#   Applies to the client side. Set to 1 to indicate that the
-#   ORB may choose to use a connection to do bidirectional GIOP
-#   calls. Set to 0 means the ORB should never do bidirectional.
-#
-#   Valid values = 0 or 1
-#
-offerBiDirectionalGIOP = 0
-
-############################################################################
-# diiThrowsSysExceptions
-#
-#   If the value of this variable is 1 then the Dynamic Invocation Interface
-#   functions (Request::invoke, send_oneway, send_deferred, get_response,
-#   poll_response) will throw system exceptions as appropriate. Otherwise 
-#   the exception will be stored in the Environment pseudo object associated
-#   with the Request. By default system exceptions are passed through the 
-#   Environment object.
-#
-#   Valid values = 0 or 1
-#
-diiThrowsSysExceptions = 0
-
-############################################################################
-# verifyObjectExistsAndType
-#
-#   If the value of this variable is 0 then the ORB will not
-#   send a GIOP LOCATE_REQUEST message to verify the existence of
-#   the object prior to the first invocation. Set this variable
-#   if the other end is a buggy ORB that cannot handle GIOP
-#   LOCATE_REQUEST. 
-#
-#   Valid values = 0 or 1
-#
-verifyObjectExistsAndType = 1
-
-############################################################################
-# giopTargetAddressMode
-#
-#   On the client side, if it is to use GIOP 1.2 or above to talk to a 
-#   server, use this Target Address Mode.
-#
-#   Valid values = 0 (GIOP::KeyAddr)
-#                  1 (GIOP::ProfileAddr)
-#                  2 (GIOP::ReferenceAddr)
-#
-giopTargetAddressMode = 0
-
-############################################################################
-# bootstrapAgentHostname
-#
-# Applies to the client side. Non-zero enables the use of Sun's bootstrap
-# agent protocol to resolve initial references. The value is the host name
-# where requests for initial references should be sent. Only use this
-# option to interoperate with Sun's javaIDL.
-#
-#bootstrapAgentHostname = localhost
-
-############################################################################
-# bootstrapAgentPort
-#
-# Applies to the client side. Use this port no. to contact the bootstrap 
-# agent.
-#
-bootstrapAgentPort = 900
-
-############################################################################
-# principal
-#
-# The value of the principal field in GIOP 1.0 and 1.1 requests
-#
-# principal = me
-
-
-
-############################################################################
-############################################################################
-############################################################################
-#                                                                          #
-#            Server Side Options                                           #
-#                                                                          #
-############################################################################
-
-
-############################################################################
-# endPoint
-# endPointNoPublish
-# endPointNoListen
-# endPointPublishAllIFs
-#
-#    There are 3 possible way to specify the endpoints a server should create.
-#    The 3 forms differ in the following ways:
-#         endPoint - create, listen on the connection and publish it in IORs
-#         endPointNoPublish - same as endPoint but do not publish it in IORs
-#         endPointNoListen - only publish it in IORs
-#
-#    There can be more than one configuration line defining endPoints.
-#    Each line adds one endpoint to the server.
-#
-#    Each configuration line can start with the keyword 'endPoint', e.g.
-#        endPoint = giop:tcp:neem:12345
-#        endPoint = giop:ssl:neem:23456
-#
-#    Or a short hand form can be used, like this:
-#
-#        endPoint = giop:tcp:neem:12345
-#                 = giop:ssl:neem:23456
-#
-#    The value of an endPoint configuration is a transport specific string.
-#    The transport strings recongised by the ORB and its supported transports
-#    are:
-#         1. giop:tcp:[<host>]:[<port>]
-#               The <host> and <port> parameter are optional. If either or
-#               both are missing, the ORB fills in the blank. For example,
-#               "giop:tcp::" will cause the ORB to pick an arbitrary tcp port
-#               as the endpoint and it will pick one IP address of the host
-#               as the host name.
-#
-#         2. giop:ssl:[<host>]:[<port>]
-#               Similar to the tcp transport except that SSL is run on top
-#               of the tcp connection.
-#
-#         3. giop:unix:[<filename>]
-#               Create a unix domain socket and bind to the file with pathname
-#               <filename>. If <filename> is not specified, e.g. "giop:unix:",
-#               the ORB would pick a file name based on the process ID and 
-#               the current timestamp.
-#               Therefore, if one wants to write an application that always
-#               restarts to use the same file to bind to its unix domain 
-#               socket, a filename should be specified in the transport string.
-#
-#   It is possible to use the ORB's transport extension framework to add
-#   a new transport to the ORB. In that case, the transport must define its
-#   own transport string format and must obey the colon separation rule.
-#   For example, if one is to create a transport which executes an arbitrary
-#   shell script and let the ORB use its stdin and stdout for sending and
-#   receiving giop messages,  a transport string could look like this:
-#         giop:shell:magic_gw
-#                ^     ^
-#                |     +--------- transport specific part
-#                +--------------- transport name
-#
-#   By default, no endPoint configuration is defined. In this case the ORB
-#   will create just 1 tcp endpoint as if the line:
-#         endPoint = giop:tcp::
-#   is specified in the configuration file
-#
-#   Other than tcp, none of the transports are guaranteed to be available
-#   on all platforms. If one specifies say:
-#          endPoint = giop:ssl::
-#   and the ORB cannot initialise an ssl endpoint, the INITIALIZE exception
-#   will be raised. Even though ssl is supported on a platform, its transport
-#   is implemented as a separate shared library and must be linked with the
-#   application for the ORB to initialise the endpoint.
-#
-#   Here are some examples of valid endPoint configurations:
-#
-#   endPoint = giop:tcp::
-#   endPoint = giop:unix:
-#            = giop:ssl::
-#
-#   endPointNoPublish = giop:tcp::
-#                     = giop:unix:
-#                     = giop:ssl::
-#
-#   endPointNoListen = giop:tcp:192.168.1.1:12345
-#
-#
-#   If the endPointPublishAllIFs boolean parameter is set to true, all
-#   non-loopback IP network interfaces are published in IORs, rather
-#   than just the first one.
-
-
-############################################################################
-# serverTransportRule
-#
-#    When the server sees a connection request from a client, it looks at the
-#    client's address and uses the rules in serverTransportRule to determine
-#    if the connection should be accepted.
-#
-#    There can be more than one configuration line of this type.
-#    Each line adds one rule to the selection process. The rules are applied
-#    in the order they are defined until one matching rule is found. 
-#
-#    The syntax of a rule is as follows:
-#    serverTransportRule =   [^]<address mask>      [action]+
-#
-#        <address mask> can be:
-#            1. localhost            if the address is this machine
-#            2. w.x.y.z/m1.m2.m3.m4  IPv4 address with the bits selected by
-#                                    the mask. e.g. 172.16.0.0/255.240.0.0
-#            3. *                    the wildcard that matches any address
-#
-#        <action>+ can be one or more of the following:
-#            1. none              Do not accept this connection.
-#            2. tcp,ssl,unix      Accept if the transport is any of the
-#                                 3 specified.
-#            3. bidir             Allow bidirectional requests if the
-#                                 client requests it.
-#
-#         The optional prefix ^ before <address mask>, if present, causes
-#         the ORB to remove previously declared clientTransportRules from
-#         its internal store before adding the current rule.
-#
-#    By default, no rule is defined. The ORB implicitly uses the following
-#    rule:
-#         serverTransportRule =    *     unix,tcp,ssl
-#    If any rule is specified, the implicit rule will not be applied.
-#
-#    Here are some example usages:
-#
-#    A) Only accept connections from our intranet
-#        serverTransportRule = localhost                  unix,tcp,ssl
-#                            = 172.16.0.0/255.240.0.0     tcp,ssl
-#                            = *                          none
-#
-#    B) Only accept ssl connections if the client is not on our intranet
-#        serverTransportRule = localhost                  unix,tcp,ssl
-#                            = 172.16.0.0/255.240.0.0     tcp,ssl
-#                            = *                          bidir,ssl
-
-
-############################################################################
-# serverCallTimeOutPeriod
-#
-#    Call timeout. On the server side, if the ORB cannot completely 
-#    unmarshal a call's arguments in the defined timeout, it shutdown the
-#    connection.
-#
-#    Valid values = (n >= 0 in milliseconds) 
-#                    0 --> no timeout.
-#
-serverCallTimeOutPeriod = 0
-
-############################################################################
-# inConScanPeriod
-#
-#   Idle connections shutdown. The ORB periodically scans all the
-#   incoming connections to detect if they are idle.
-#   If no operation has passed through a connection for a scan period,
-#   the ORB would treat this connection idle and shut it down.
-#
-#    Valid values = (n >= 0 in seconds) 
-#                    0 --> do not close idle connections.
-#
-inConScanPeriod = 180
-
-############################################################################
-# threadPerConnectionPolicy
-#
-#   1 means the ORB should dedicate one thread per connection on the 
-#   server side. 0 means the ORB should dispatch a thread from a pool
-#   to a connection only when a request has arrived.
-#
-#   Valid values = 0 or 1
-#
-threadPerConnectionPolicy = 1
-
-############################################################################
-# maxServerThreadPerConnection
-#
-#   The max. no. of threads the server will dispatch to serve the
-#   requests coming from one connection.
-#
-#   Valid values = (n >= 1) 
-#
-maxServerThreadPerConnection = 100
-
-############################################################################
-# maxServerThreadPoolSize
-#   The max. no. of threads the server will allocate to do various
-#   ORB tasks. This number does not include the dedicated thread
-#   per connection when the threadPerConnectionPolicy is in effect
-#
-#   Valid values = (n >= 1) 
-#
-maxServerThreadPoolSize = 100
-
-############################################################################
-# threadPerConnectionUpperLimit
-#
-#   If the one thread per connection is in effect, this number is
-#   the max. no. of connections the server will allow before it
-#   switch off the one thread per connection policy and move to
-#   the thread pool policy.
-#
-#   Valid values = (n >= 1) 
-#
-threadPerConnectionUpperLimit = 10000
-
-############################################################################
-# threadPerConnectionLowerLimit
-#
-#   If the one thread per connection was in effect and was switched
-#   off because threadPerConnectionUpperLimit has been exceeded
-#   previously, this number tells when the policy should be restored
-#   when the number of connections drop.
-#
-#   Valid values = (n >= 1 && n < threadPerConnectionUpperLimit) 
-#
-threadPerConnectionLowerLimit = 9000
-
-############################################################################
-# threadPoolWatchConnection
-#
-#   After dispatching an upcall in thread pool mode, the thread that
-#   has just performed the call can watch the connection for a short
-#   time before returning to the pool. This leads to less thread
-#   switching for a series of calls from a single client, but is less
-#   fair if there are concurrent clients. The connection is watched
-#   if the number of threads concurrently handling the connection is
-#   <= the value of this parameter. i.e. if the parameter is zero,
-#   the connection is never watched; if it is 1, the last thread
-#   managing a connection watches it; if 2, the connection is still
-#   watched if there is one other thread still in an upcall for the
-#   connection, and so on.
-
-threadPoolWatchConnection = 1
-
-############################################################################
-# connectionWatchPeriod
-#
-#   For each endpoint, the ORB allocates a thread to watch for new
-#   connections and to monitor existing connections for calls that
-#   should be handed by the thread pool. The thread blocks in select()
-#   or similar for a period, after which it re-scans the lists of
-#   connections it should watch. This parameter is specified in
-#   microseconds.
-#
-#   Valid values = (n >= 0 in microseconds)
-#
-connectionWatchPeriod = 50000
-
-############################################################################
-# connectionWatchImmediate
-#
-#   When a thread handles an incoming call, it unmarshals the
-#   arguments then marks the connection as watchable by the connection
-#   watching thread, in case the client sends a concurrent call on the
-#   same connection. If this parameter is set to the default false,
-#   the connection is not actually watched until the next connection
-#   watch period (determined by the connectionWatchPeriod parameter).
-#   If connectionWatchImmediate is set true, the connection watching
-#   thread is immediately signalled to watch the connection. That
-#   leads to faster interactive response to clients that multiplex
-#   calls, but adds significant overhead along the call chain.
-#
-#   Note that this setting has no effect on Windows, since it has no
-#   mechanism for signalling the connection watching thread.
-#
-#   Valid values = 0 or 1
-#
-connectionWatchImmediate = 0
-
-############################################################################
-# acceptBiDirectionalGIOP
-#
-#   Applies to the server side. Set to 1 to indicate that the
-#   ORB may choose to accept a client's offer to use bidirectional
-#   GIOP calls on a connection. Set to 0 means the ORB should
-#   never accept any bidirectional offer and should stick to normal
-#   GIOP.
-#
-#   Valid values = 0 or 1
-#
-acceptBiDirectionalGIOP = 0
-
-############################################################################
-# unixTransportDirectory
-#
-#   Applies to the server side. Determine the directory in which
-#   the unix domain socket is to be created.
-#
-#   Valid values = a valid pathname for a directory
-#
-unixTransportDirectory = /tmp/omni-%u
-# %u is expanded into user name.
-
-############################################################################
-# unixTransportPermission
-#
-#   Applies to the server side. Determine the permission mode bits
-#   the unix domain socket is set to.
-#
-#   Valid values = unix permission mode bits in octal radix (e.g. 0755)
-#
-unixTransportPermission = 0777
-
-############################################################################
-# supportCurrent
-#
-#   If the value of this variable is TRUE, per-thread information is
-#   made available through the Current interfaces, e.g.
-#   PortableServer::Current. If you do not need this information, you
-#   can set the value to 0, resulting in a small performance
-#   improvement.
-#
-supportCurrent = 1
-
-############################################################################
-# objectTableSize
-#
-#   Hash table size of the Active Object Map. If this is zero, the ORB
-#   uses a dynamically resized open hash table. This is normally the  
-#   best option, but it leads to less predictable performance since   
-#   any operation which adds or removes a table entry may trigger a   
-#   resize. If you set this to a non-zero value, the hash table has   
-#   the specified number of entries, and is never resized. Note that  
-#   the hash table is open, so this does not limit the number of      
-#   active objects, just how efficiently they can be located.
-#
-#   Valid values = (n >= 0)
-#                  0 --> use a dynamically resized table.
-#
-objectTableSize = 0
-
-############################################################################
-# poaHoldRequestTimeout
-#
-#   This variable can be used to set a time-out for calls being held
-#   in a POA which is in the HOLDING state.  It gives the time in
-#   milliseconds after which a TRANSIENT exception will be thrown if the
-#   POA is not transitioned to a different state.
-#
-#   Valid values = (n >= 0 in milliseconds) 
-#                   0 --> no time-out.
-#
-poaHoldRequestTimeout = 0
-
-############################################################################
-# poaUniquePersistentSystemIds
-#
-#   The POA specification requires that object ids in POAs with the
-#   PERSISTENT and SYSTEM_ID policies are unique between
-#   instantiations of the POA. Older versions of omniORB did not
-#   comply with that, and reused object ids. With this value true, the
-#   POA has the correct behaviour; with false, the POA uses the old
-#   scheme for compatibility.
-#
-#   Valid values = 0 or 1
-#
-poaUniquePersistentSystemIds = 1
-
-############################################################################
-# supportBootstrapAgent
-#
-# Applies to the server side. 1 means enable the support for Sun's
-# bootstrap agent protocol.  This enables interoperability between omniORB
-# servers and Sun's javaIDL clients. When this option is enabled, an
-# omniORB server will respond to a bootstrap agent request.
-supportBootstrapAgent = 0
diff --git a/packages/omniorb/files/omniORB_embedded_appl.patch b/packages/omniorb/files/omniORB_embedded_appl.patch
deleted file mode 100644
index 43afc58bf2..0000000000
--- a/packages/omniorb/files/omniORB_embedded_appl.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-*** omniORB-4.0.5/src/dir.mk    2002-02-18 06:58:54.000000000 -0500
---- omniORB-4.0.5.new/src/dir.mk        2005-03-23 09:11:04.585121450 -0500
-***************
-*** 12,20 ****
-
-  SUBDIRS += lib
-
-! ifndef EmbeddedSystem
-  SUBDIRS += appl services
-! endif
-
-  all::
-        @echo
---- 12,20 ----
-
-  SUBDIRS += lib
-
-! #ifndef EmbeddedSystem
-  SUBDIRS += appl services
-! #endif
-
-  all::
-        @echo
-
diff --git a/packages/omniorb/files/rm_LongDouble.patch b/packages/omniorb/files/rm_LongDouble.patch
deleted file mode 100644
index 20556ddcf1..0000000000
--- a/packages/omniorb/files/rm_LongDouble.patch
+++ /dev/null
@@ -1,14 +0,0 @@
-*** omniORB-4.0.7/idl/corbaidl.idl.orig	2006-10-13 09:21:35.000000000 -0400
---- omniORB-4.0.7/idl/corbaidl.idl	2006-10-13 09:22:38.000000000 -0400
-***************
-*** 48,56 ****
-  #endif
-    typedef sequence<float>              FloatSeq;
-    typedef sequence<double>             DoubleSeq;
-- #ifdef HAS_LongDouble
--   typedef sequence<long double>        LongDoubleSeq;
-- #endif
-    typedef sequence<string>             StringSeq;
-    typedef sequence<wstring>            WStringSeq;
-  
---- 48,53 ----
diff --git a/packages/omniorb/omniorb-native_4.0.7.bb b/packages/omniorb/omniorb-native_4.0.7.bb
deleted file mode 100644
index 1df6236aea..0000000000
--- a/packages/omniorb/omniorb-native_4.0.7.bb
+++ /dev/null
@@ -1,18 +0,0 @@
-SECTION = "devel"
-DEPENDS += "python-native"
-PR = "r0"
-
-SRC_URI = "${SOURCEFORGE_MIRROR}/omniorb/omniORB-${PV}.tar.gz"
-
-S = "${WORKDIR}/omniORB-${PV}"
-
-inherit native autotools
-
-do_compile () {
-        oe_runmake
-}
-# Ugly hack so libtool does not find native libs when building cross packages
-# We really only build this package for omniidl anyway
-do_stage_append() {
-        rm -f  ${STAGING_LIBDIR_NATIVE}/libomni*
-}
diff --git a/packages/omniorb/omniorb_4.0.7.bb b/packages/omniorb/omniorb_4.0.7.bb
deleted file mode 100644
index 89e98e3534..0000000000
--- a/packages/omniorb/omniorb_4.0.7.bb
+++ /dev/null
@@ -1,38 +0,0 @@
-DESCRIPTION = "OmniORB High Performance ORB"
-SECTION = "devel"
-PRIORITY = "optional"
-LICENSE = "LGPL"
-DEPENDS = "omniorb-native"
-PR = "r0"
-
-SRC_URI = "${SOURCEFORGE_MIRROR}/omniorb/omniORB-${PV}.tar.gz \
-file://omniORB.cfg \
-file://omniORB-cross.patch;patch=1 \
-file://omniORB_embedded_appl.patch;patch=1 \
-file://rm_LongDouble.patch;patch=1 \
-file://arm_double.patch;patch=1;pnum=0 \
-file://dynskel.patch;patch=1;pnum=0 \
-"
-
-S = "${WORKDIR}/omniORB-${PV}"
-
-FILES_${PN}-dev += "${datadir}/idl/omniORB/* ${datadir}/idl/omniORB/cos/*
-
-inherit autotools pkgconfig
-
-do_compile () {
-        export EmbeddedSystem=1
-        export TOOLBINDIR=${STAGING_BINDIR_NATIVE}
-        oe_runmake
-}
-do_install () {
-        export EmbeddedSystem=1
-        make DESTDIR=${D} install
-        install -d ${D}${sysconfdir}
-        install -m 0644 ${WORKDIR}/omniORB.cfg ${D}${sysconfdir}
-        install -d ${D}${localstatedir}/omninames
-}
-do_stage () {
-        export EmbeddedSystem=1
-        autotools_stage_all
-}