conf and linux: update ts72xx to 2.6.24 kernel. Closes 3906.

1 files changed, 0 insertions, 110 deletions

diff --git a/packages/linux/linux-2.6.22+2.6.23-rc5/ts72xx/ep93xx-i2c.diff b/packages/linux/linux-2.6.22+2.6.23-rc5/ts72xx/ep93xx-i2c.diff
deleted file mode 100644
index bf4622b1db..0000000000
--- a/packages/linux/linux-2.6.22+2.6.23-rc5/ts72xx/ep93xx-i2c.diff
+++ /dev/null
@@ -1,110 +0,0 @@
-
-Instantiate the ep93xx gpio i2c bus driver in the generic ep93xx
-code.
-
-Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
-
-Index: linux-2.6.23-rc5/arch/arm/mach-ep93xx/core.c
-===================================================================
---- linux-2.6.23-rc5.orig/arch/arm/mach-ep93xx/core.c	2007-09-04 02:25:36.000000000 +0200
-+++ linux-2.6.23-rc5/arch/arm/mach-ep93xx/core.c	2007-09-04 02:28:12.000000000 +0200
-@@ -509,6 +509,52 @@
- };
- 
- 
-+static DEFINE_MUTEX(eeclk_eedat_mutex);
-+static int i2c_transaction_in_progress;
-+
-+static void ep93xx_i2c_start_condition(void *cookie)
-+{
-+	if (!i2c_transaction_in_progress) {
-+		mutex_lock(&eeclk_eedat_mutex);
-+		i2c_transaction_in_progress = 1;
-+	}
-+}
-+
-+static void ep93xx_i2c_stop_condition(void *cookie)
-+{
-+	if (i2c_transaction_in_progress) {
-+		mutex_unlock(&eeclk_eedat_mutex);
-+		i2c_transaction_in_progress = 0;
-+	} else {
-+		printk(KERN_WARNING "ep93xx: i2c stop without start??\n");
-+	}
-+}
-+
-+static struct ep93xx_i2c_data ep93xx_i2c_gpio_data = {
-+	.sda_pin		= EP93XX_GPIO_LINE_EEDAT,
-+	.scl_pin		= EP93XX_GPIO_LINE_EECLK,
-+	.start			= ep93xx_i2c_start_condition,
-+	.stop			= ep93xx_i2c_stop_condition,
-+};
-+
-+static struct platform_device ep93xx_i2c_device = {
-+	.name			= "ep93xx-i2c",
-+	.id			= 0,
-+	.dev.platform_data	= &ep93xx_i2c_gpio_data,
-+	.num_resources		= 0,
-+};
-+
-+void eeclk_eedat_claim(void)
-+{
-+	mutex_lock(&eeclk_eedat_mutex);
-+}
-+
-+void eeclk_eedat_release(void)
-+{
-+	mutex_unlock(&eeclk_eedat_mutex);
-+}
-+
-+
- void __init ep93xx_init_devices(void)
- {
- 	unsigned int v;
-@@ -521,10 +567,20 @@
- 	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
- 	__raw_writel(v, EP93XX_SYSCON_DEVICE_CONFIG);
- 
-+	/*
-+	 * When EECLK/EEDAT are in open drain mode (EEDRIVE=0b11),
-+	 * writing a 1 to their Data Register bits causes subsequent
-+	 * reads from the Data Direction Register to return 'input',
-+	 * which confuses gpio_line_config().  So, we use CMOS drive
-+	 * mode instead.
-+	 */
-+	__raw_writel(0, EP93XX_GPIO_EEDRIVE);
-+
- 	amba_device_register(&uart1_device, &iomem_resource);
- 	amba_device_register(&uart2_device, &iomem_resource);
- 	amba_device_register(&uart3_device, &iomem_resource);
- 
- 	platform_device_register(&ep93xx_rtc_device);
- 	platform_device_register(&ep93xx_ohci_device);
-+	platform_device_register(&ep93xx_i2c_device);
- }
-Index: linux-2.6.23-rc5/include/asm-arm/arch-ep93xx/ep93xx-regs.h
-===================================================================
---- linux-2.6.23-rc5.orig/include/asm-arm/arch-ep93xx/ep93xx-regs.h	2007-09-04 02:25:36.000000000 +0200
-+++ linux-2.6.23-rc5/include/asm-arm/arch-ep93xx/ep93xx-regs.h	2007-09-04 02:28:10.000000000 +0200
-@@ -91,6 +91,7 @@
- #define EP93XX_GPIO_B_INT_ENABLE	EP93XX_GPIO_REG(0xb8)
- #define EP93XX_GPIO_B_INT_STATUS	EP93XX_GPIO_REG(0xbc)
- #define EP93XX_GPIO_B_INT_DEBOUNCE	EP93XX_GPIO_REG(0xc4)
-+#define EP93XX_GPIO_EEDRIVE		EP93XX_GPIO_REG(0xc8)
- 
- #define EP93XX_AAC_BASE			(EP93XX_APB_VIRT_BASE + 0x00080000)
- 
-Index: linux-2.6.23-rc5/include/asm-arm/arch-ep93xx/platform.h
-===================================================================
---- linux-2.6.23-rc5.orig/include/asm-arm/arch-ep93xx/platform.h	2007-09-04 02:26:20.000000000 +0200
-+++ linux-2.6.23-rc5/include/asm-arm/arch-ep93xx/platform.h	2007-09-04 02:26:38.000000000 +0200
-@@ -10,6 +10,9 @@
- void ep93xx_init_devices(void);
- extern struct sys_timer ep93xx_timer;
- 
-+void eeclk_eedat_claim(void);
-+void eeclk_eedat_release(void);
-+
- struct ep93xx_eth_data
- {
- 	unsigned char	dev_addr[6];