rename packages/ to recipes/ per earlier agreement

See links below for more details:
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21326
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21816

Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Acked-by: Mike Westerhof <mwester@dls.net>
Acked-by: Philip Balister <philip@balister.org>
Acked-by: Khem Raj <raj.khem@gmail.com>
Acked-by: Marcin Juszkiewicz <hrw@openembedded.org>
Acked-by: Koen Kooi <koen@openembedded.org>
Acked-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>

2 files changed, 0 insertions, 2742 deletions

diff --git a/packages/linux/devkitidp-pxa255-2.6.19/defconfig b/packages/linux/devkitidp-pxa255-2.6.19/defconfig
deleted file mode 100644
index 23bf0167f6..0000000000
--- a/packages/linux/devkitidp-pxa255-2.6.19/defconfig
+++ /dev/null
@@ -1,1156 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19
-# Sat Jan  6 12:58:12 2007
-#
-CONFIG_ARM=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-CONFIG_ARCH_PXA_IDP=y
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-CONFIG_PXA25x=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_DEBUG=y
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS0,115200 mtdparts=phys_mapped_flash:256k(boot)ro,0x1C0000(kernel),-(root)"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-# CONFIG_PACKET is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0000000
-CONFIG_MTD_PHYSMAP_LEN=0x4000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_IDPKBD=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-# CONFIG_TIFM_CORE is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-# CONFIG_LEDS_TRIGGERS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_BANDWIDTH=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_PXA=y
-# CONFIG_MMC_TIFM_SD is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_RWSEMS is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
diff --git a/packages/linux/devkitidp-pxa255-2.6.19/linux-2.6.19_devkitidp1.patch b/packages/linux/devkitidp-pxa255-2.6.19/linux-2.6.19_devkitidp1.patch
deleted file mode 100644
index 783ecaef43..0000000000
--- a/packages/linux/devkitidp-pxa255-2.6.19/linux-2.6.19_devkitidp1.patch
+++ /dev/null
@@ -1,1586 +0,0 @@
-Index: linux-2.6.19/arch/arm/configs/pxa255-idp_defconfig
-===================================================================
---- linux-2.6.19.orig/arch/arm/configs/pxa255-idp_defconfig
-+++ linux-2.6.19/arch/arm/configs/pxa255-idp_defconfig
-@@ -1,14 +1,13 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.12-rc1-bk2
--# Sun Mar 27 22:20:17 2005
-+# Linux kernel version: 2.6.13
-+# Fri Sep  2 11:36:29 2005
- #
- CONFIG_ARM=y
- CONFIG_MMU=y
- CONFIG_UID16=y
- CONFIG_RWSEM_GENERIC_SPINLOCK=y
- CONFIG_GENERIC_CALIBRATE_DELAY=y
--CONFIG_GENERIC_IOMAP=y
- 
- #
- # Code maturity level options
-@@ -16,6 +15,7 @@ CONFIG_GENERIC_IOMAP=y
- CONFIG_EXPERIMENTAL=y
- CONFIG_CLEAN_COMPILE=y
- CONFIG_BROKEN_ON_SMP=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
- 
- #
- # General setup
-@@ -34,6 +34,8 @@ CONFIG_KOBJECT_UEVENT=y
- CONFIG_KALLSYMS=y
- # CONFIG_KALLSYMS_ALL is not set
- # CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
- CONFIG_BASE_FULL=y
- CONFIG_FUTEX=y
- CONFIG_EPOLL=y
-@@ -50,11 +52,12 @@ CONFIG_BASE_SMALL=0
- # Loadable module support
- #
- CONFIG_MODULES=y
--# CONFIG_MODULE_UNLOAD is not set
-+CONFIG_MODULE_UNLOAD=y
-+CONFIG_MODULE_FORCE_UNLOAD=y
- CONFIG_OBSOLETE_MODPARM=y
- # CONFIG_MODVERSIONS is not set
- # CONFIG_MODULE_SRCVERSION_ALL is not set
--# CONFIG_KMOD is not set
-+CONFIG_KMOD=y
- 
- #
- # System Type
-@@ -79,6 +82,7 @@ CONFIG_ARCH_PXA=y
- # CONFIG_ARCH_VERSATILE is not set
- # CONFIG_ARCH_IMX is not set
- # CONFIG_ARCH_H720X is not set
-+# CONFIG_ARCH_AAEC2000 is not set
- 
- #
- # Intel PXA2xx Implementations
-@@ -98,7 +102,6 @@ CONFIG_CPU_32v5=y
- CONFIG_CPU_ABRT_EV5T=y
- CONFIG_CPU_CACHE_VIVT=y
- CONFIG_CPU_TLB_V4WBI=y
--CONFIG_CPU_MINICACHE=y
- 
- #
- # Processor Features
-@@ -109,16 +112,35 @@ CONFIG_XSCALE_PMU=y
- #
- # Bus support
- #
-+CONFIG_ISA_DMA_API=y
- 
- #
- # PCCARD (PCMCIA/CardBus) support
- #
--# CONFIG_PCCARD is not set
-+CONFIG_PCCARD=y
-+CONFIG_PCMCIA_DEBUG=y
-+CONFIG_PCMCIA=y
-+CONFIG_PCMCIA_LOAD_CIS=y
-+CONFIG_PCMCIA_IOCTL=y
-+
-+#
-+# PC-card bridges
-+#
-+# CONFIG_TCIC is not set
-+CONFIG_PCMCIA_PXA2XX=y
- 
- #
- # Kernel Features
- #
- # CONFIG_PREEMPT is not set
-+# CONFIG_NO_IDLE_HZ is not set
-+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
- CONFIG_LEDS=y
- CONFIG_LEDS_TIMER=y
- CONFIG_LEDS_CPU=y
-@@ -129,7 +151,7 @@ CONFIG_ALIGNMENT_TRAP=y
- #
- CONFIG_ZBOOT_ROM_TEXT=0x0
- CONFIG_ZBOOT_ROM_BSS=0x0
--CONFIG_CMDLINE="root=/dev/nfs ip=dhcp console=ttyS0,115200 mem=64M"
-+CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS0,115200 mtdparts=phys_mapped_flash:256k(boot)ro,0x1C0000(kernel),-(root)"
- # CONFIG_XIP_KERNEL is not set
- 
- #
-@@ -157,6 +179,67 @@ CONFIG_BINFMT_ELF=y
- # CONFIG_PM is not set
- 
- #
-+# Networking
-+#
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+# CONFIG_PACKET is not set
-+CONFIG_UNIX=y
-+# CONFIG_NET_KEY is not set
-+CONFIG_INET=y
-+# CONFIG_IP_MULTICAST is not set
-+# CONFIG_IP_ADVANCED_ROUTER is not set
-+CONFIG_IP_FIB_HASH=y
-+CONFIG_IP_PNP=y
-+CONFIG_IP_PNP_DHCP=y
-+# CONFIG_IP_PNP_BOOTP is not set
-+# CONFIG_IP_PNP_RARP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+# CONFIG_ARPD is not set
-+# CONFIG_SYN_COOKIES is not set
-+# CONFIG_INET_AH is not set
-+# CONFIG_INET_ESP is not set
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_TUNNEL is not set
-+CONFIG_IP_TCPDIAG=y
-+# CONFIG_IP_TCPDIAG_IPV6 is not set
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_BIC=y
-+# CONFIG_IPV6 is not set
-+# CONFIG_NETFILTER is not set
-+
-+#
-+# SCTP Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_IP_SCTP is not set
-+# CONFIG_ATM is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_NET_DIVERT is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+# CONFIG_NET_SCHED is not set
-+# CONFIG_NET_CLS_ROUTE is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+
-+#
- # Device Drivers
- #
- 
-@@ -165,7 +248,7 @@ CONFIG_BINFMT_ELF=y
- #
- CONFIG_STANDALONE=y
- CONFIG_PREVENT_FIRMWARE_BUILD=y
--# CONFIG_FW_LOADER is not set
-+CONFIG_FW_LOADER=y
- # CONFIG_DEBUG_DRIVER is not set
- 
- #
-@@ -176,7 +259,7 @@ CONFIG_MTD=y
- # CONFIG_MTD_CONCAT is not set
- CONFIG_MTD_PARTITIONS=y
- # CONFIG_MTD_REDBOOT_PARTS is not set
--# CONFIG_MTD_CMDLINE_PARTS is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
- # CONFIG_MTD_AFS_PARTS is not set
- 
- #
-@@ -209,6 +292,7 @@ CONFIG_MTD_MAP_BANK_WIDTH_4=y
- CONFIG_MTD_CFI_I2=y
- # CONFIG_MTD_CFI_I4 is not set
- # CONFIG_MTD_CFI_I8 is not set
-+# CONFIG_MTD_OTP is not set
- CONFIG_MTD_CFI_INTELEXT=y
- # CONFIG_MTD_CFI_AMDSTD is not set
- # CONFIG_MTD_CFI_STAA is not set
-@@ -222,10 +306,14 @@ CONFIG_MTD_CFI_UTIL=y
- # Mapping drivers for chip access
- #
- # CONFIG_MTD_COMPLEX_MAPPINGS is not set
--# CONFIG_MTD_PHYSMAP is not set
-+CONFIG_MTD_PHYSMAP=y
-+CONFIG_MTD_PHYSMAP_START=0x0000000
-+CONFIG_MTD_PHYSMAP_LEN=0x4000000
-+CONFIG_MTD_PHYSMAP_BANKWIDTH=4
- # CONFIG_MTD_ARM_INTEGRATOR is not set
- # CONFIG_MTD_EDB7312 is not set
- # CONFIG_MTD_SHARP_SL is not set
-+# CONFIG_MTD_PLATRAM is not set
- 
- #
- # Self-contained MTD device drivers
-@@ -260,10 +348,10 @@ CONFIG_MTD_CFI_UTIL=y
- #
- # Block devices
- #
--# CONFIG_BLK_DEV_FD is not set
- # CONFIG_BLK_DEV_COW_COMMON is not set
- # CONFIG_BLK_DEV_LOOP is not set
- # CONFIG_BLK_DEV_NBD is not set
-+# CONFIG_BLK_DEV_UB is not set
- # CONFIG_BLK_DEV_RAM is not set
- CONFIG_BLK_DEV_RAM_COUNT=16
- CONFIG_INITRAMFS_SOURCE=""
-@@ -290,9 +378,11 @@ CONFIG_BLK_DEV_IDE=y
- # CONFIG_BLK_DEV_IDE_SATA is not set
- CONFIG_BLK_DEV_IDEDISK=y
- # CONFIG_IDEDISK_MULTI_MODE is not set
-+# CONFIG_BLK_DEV_IDECS is not set
- # CONFIG_BLK_DEV_IDECD is not set
- # CONFIG_BLK_DEV_IDETAPE is not set
- # CONFIG_BLK_DEV_IDEFLOPPY is not set
-+# CONFIG_BLK_DEV_IDESCSI is not set
- # CONFIG_IDE_TASK_IOCTL is not set
- 
- #
-@@ -307,89 +397,69 @@ CONFIG_BLK_DEV_IDEDISK=y
- #
- # SCSI device support
- #
--# CONFIG_SCSI is not set
-+CONFIG_SCSI=y
-+CONFIG_SCSI_PROC_FS=y
- 
- #
--# Multi-device support (RAID and LVM)
-+# SCSI support type (disk, tape, CD-ROM)
- #
--# CONFIG_MD is not set
-+# CONFIG_BLK_DEV_SD is not set
-+# CONFIG_CHR_DEV_ST is not set
-+# CONFIG_CHR_DEV_OSST is not set
-+# CONFIG_BLK_DEV_SR is not set
-+# CONFIG_CHR_DEV_SG is not set
-+# CONFIG_CHR_DEV_SCH is not set
- 
- #
--# Fusion MPT device support
-+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
- #
-+# CONFIG_SCSI_MULTI_LUN is not set
-+# CONFIG_SCSI_CONSTANTS is not set
-+# CONFIG_SCSI_LOGGING is not set
- 
- #
--# IEEE 1394 (FireWire) support
-+# SCSI Transport Attributes
- #
-+# CONFIG_SCSI_SPI_ATTRS is not set
-+# CONFIG_SCSI_FC_ATTRS is not set
-+# CONFIG_SCSI_ISCSI_ATTRS is not set
- 
- #
--# I2O device support
-+# SCSI low-level drivers
- #
-+# CONFIG_SCSI_SATA is not set
-+# CONFIG_SCSI_DEBUG is not set
- 
- #
--# Networking support
-+# PCMCIA SCSI adapter support
- #
--CONFIG_NET=y
-+# CONFIG_PCMCIA_AHA152X is not set
-+# CONFIG_PCMCIA_FDOMAIN is not set
-+# CONFIG_PCMCIA_NINJA_SCSI is not set
-+# CONFIG_PCMCIA_QLOGIC is not set
-+# CONFIG_PCMCIA_SYM53C500 is not set
- 
- #
--# Networking options
-+# Multi-device support (RAID and LVM)
- #
--# CONFIG_PACKET is not set
--# CONFIG_NETLINK_DEV is not set
--CONFIG_UNIX=y
--# CONFIG_NET_KEY is not set
--CONFIG_INET=y
--# CONFIG_IP_MULTICAST is not set
--# CONFIG_IP_ADVANCED_ROUTER is not set
--CONFIG_IP_PNP=y
--CONFIG_IP_PNP_DHCP=y
--# CONFIG_IP_PNP_BOOTP is not set
--# CONFIG_IP_PNP_RARP is not set
--# CONFIG_NET_IPIP is not set
--# CONFIG_NET_IPGRE is not set
--# CONFIG_ARPD is not set
--# CONFIG_SYN_COOKIES is not set
--# CONFIG_INET_AH is not set
--# CONFIG_INET_ESP is not set
--# CONFIG_INET_IPCOMP is not set
--# CONFIG_INET_TUNNEL is not set
--CONFIG_IP_TCPDIAG=y
--# CONFIG_IP_TCPDIAG_IPV6 is not set
--# CONFIG_IPV6 is not set
--# CONFIG_NETFILTER is not set
-+# CONFIG_MD is not set
- 
- #
--# SCTP Configuration (EXPERIMENTAL)
-+# Fusion MPT device support
- #
--# CONFIG_IP_SCTP is not set
--# CONFIG_ATM is not set
--# CONFIG_BRIDGE is not set
--# CONFIG_VLAN_8021Q is not set
--# CONFIG_DECNET is not set
--# CONFIG_LLC2 is not set
--# CONFIG_IPX is not set
--# CONFIG_ATALK is not set
--# CONFIG_X25 is not set
--# CONFIG_LAPB is not set
--# CONFIG_NET_DIVERT is not set
--# CONFIG_ECONET is not set
--# CONFIG_WAN_ROUTER is not set
-+# CONFIG_FUSION is not set
- 
- #
--# QoS and/or fair queueing
-+# IEEE 1394 (FireWire) support
- #
--# CONFIG_NET_SCHED is not set
--# CONFIG_NET_CLS_ROUTE is not set
- 
- #
--# Network testing
-+# I2O device support
-+#
-+
-+#
-+# Network device support
- #
--# CONFIG_NET_PKTGEN is not set
--# CONFIG_NETPOLL is not set
--# CONFIG_NET_POLL_CONTROLLER is not set
--# CONFIG_HAMRADIO is not set
--# CONFIG_IRDA is not set
--# CONFIG_BT is not set
- CONFIG_NETDEVICES=y
- # CONFIG_DUMMY is not set
- # CONFIG_BONDING is not set
-@@ -402,6 +472,7 @@ CONFIG_NETDEVICES=y
- CONFIG_NET_ETHERNET=y
- CONFIG_MII=y
- CONFIG_SMC91X=y
-+# CONFIG_DM9000 is not set
- 
- #
- # Ethernet (1000 Mbit)
-@@ -421,6 +492,11 @@ CONFIG_SMC91X=y
- # CONFIG_NET_RADIO is not set
- 
- #
-+# PCMCIA network device support
-+#
-+# CONFIG_NET_PCMCIA is not set
-+
-+#
- # Wan interfaces
- #
- # CONFIG_WAN is not set
-@@ -428,6 +504,8 @@ CONFIG_SMC91X=y
- # CONFIG_SLIP is not set
- # CONFIG_SHAPER is not set
- # CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
- 
- #
- # ISDN subsystem
-@@ -443,7 +521,7 @@ CONFIG_INPUT=y
- # Userland interfaces
- #
- CONFIG_INPUT_MOUSEDEV=y
--CONFIG_INPUT_MOUSEDEV_PSAUX=y
-+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
- CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
- CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
- # CONFIG_INPUT_JOYDEV is not set
-@@ -455,11 +533,12 @@ CONFIG_INPUT_EVDEV=y
- # Input Device Drivers
- #
- CONFIG_INPUT_KEYBOARD=y
--CONFIG_KEYBOARD_ATKBD=y
-+# CONFIG_KEYBOARD_ATKBD is not set
- # CONFIG_KEYBOARD_SUNKBD is not set
- # CONFIG_KEYBOARD_LKKBD is not set
- # CONFIG_KEYBOARD_XTKBD is not set
- # CONFIG_KEYBOARD_NEWTON is not set
-+CONFIG_KEYBOARD_IDPKBD=y
- # CONFIG_INPUT_MOUSE is not set
- # CONFIG_INPUT_JOYSTICK is not set
- # CONFIG_INPUT_TOUCHSCREEN is not set
-@@ -470,10 +549,8 @@ CONFIG_KEYBOARD_ATKBD=y
- #
- CONFIG_SERIO=y
- # CONFIG_SERIO_SERPORT is not set
--CONFIG_SERIO_LIBPS2=y
- # CONFIG_SERIO_RAW is not set
- # CONFIG_GAMEPORT is not set
--CONFIG_SOUND_GAMEPORT=y
- 
- #
- # Character devices
-@@ -516,18 +593,28 @@ CONFIG_LEGACY_PTY_COUNT=256
- #
- # Ftape, the floppy tape device driver
- #
--# CONFIG_DRM is not set
-+
-+#
-+# PCMCIA character devices
-+#
-+# CONFIG_SYNCLINK_CS is not set
- # CONFIG_RAW_DRIVER is not set
- 
- #
- # TPM devices
- #
--# CONFIG_TCG_TPM is not set
- 
- #
- # I2C support
- #
- # CONFIG_I2C is not set
-+# CONFIG_I2C_SENSOR is not set
-+
-+#
-+# Hardware Monitoring support
-+#
-+CONFIG_HWMON=y
-+# CONFIG_HWMON_DEBUG_CHIP is not set
- 
- #
- # Misc devices
-@@ -551,10 +638,12 @@ CONFIG_FB_CFB_FILLRECT=y
- CONFIG_FB_CFB_COPYAREA=y
- CONFIG_FB_CFB_IMAGEBLIT=y
- CONFIG_FB_SOFT_CURSOR=y
-+# CONFIG_FB_MACMODES is not set
- # CONFIG_FB_MODE_HELPERS is not set
- # CONFIG_FB_TILEBLITTING is not set
- CONFIG_FB_PXA=y
- # CONFIG_FB_PXA_PARAMETERS is not set
-+# CONFIG_FB_S1D13XXX is not set
- # CONFIG_FB_VIRTUAL is not set
- 
- #
-@@ -563,15 +652,9 @@ CONFIG_FB_PXA=y
- # CONFIG_VGA_CONSOLE is not set
- CONFIG_DUMMY_CONSOLE=y
- CONFIG_FRAMEBUFFER_CONSOLE=y
--CONFIG_FONTS=y
-+# CONFIG_FONTS is not set
- CONFIG_FONT_8x8=y
- CONFIG_FONT_8x16=y
--# CONFIG_FONT_6x11 is not set
--# CONFIG_FONT_PEARL_8x8 is not set
--# CONFIG_FONT_ACORN_8x8 is not set
--# CONFIG_FONT_MINI_4x6 is not set
--# CONFIG_FONT_SUN8x16 is not set
--# CONFIG_FONT_SUN12x22 is not set
- 
- #
- # Logo configuration
-@@ -592,7 +675,116 @@ CONFIG_LOGO_LINUX_CLUT224=y
- #
- CONFIG_USB_ARCH_HAS_HCD=y
- # CONFIG_USB_ARCH_HAS_OHCI is not set
--# CONFIG_USB is not set
-+CONFIG_USB=y
-+CONFIG_USB_DEBUG=y
-+
-+#
-+# Miscellaneous USB options
-+#
-+# CONFIG_USB_DEVICEFS is not set
-+CONFIG_USB_BANDWIDTH=y
-+# CONFIG_USB_DYNAMIC_MINORS is not set
-+# CONFIG_USB_OTG is not set
-+
-+#
-+# USB Host Controller Drivers
-+#
-+# CONFIG_USB_ISP116X_HCD is not set
-+# CONFIG_USB_SL811_HCD is not set
-+
-+#
-+# USB Device Class drivers
-+#
-+# CONFIG_USB_BLUETOOTH_TTY is not set
-+# CONFIG_USB_ACM is not set
-+# CONFIG_USB_PRINTER is not set
-+
-+#
-+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-+#
-+CONFIG_USB_STORAGE=y
-+# CONFIG_USB_STORAGE_DEBUG is not set
-+# CONFIG_USB_STORAGE_DATAFAB is not set
-+# CONFIG_USB_STORAGE_FREECOM is not set
-+# CONFIG_USB_STORAGE_ISD200 is not set
-+# CONFIG_USB_STORAGE_DPCM is not set
-+# CONFIG_USB_STORAGE_USBAT is not set
-+# CONFIG_USB_STORAGE_SDDR09 is not set
-+# CONFIG_USB_STORAGE_SDDR55 is not set
-+# CONFIG_USB_STORAGE_JUMPSHOT is not set
-+
-+#
-+# USB Input Devices
-+#
-+CONFIG_USB_HID=y
-+CONFIG_USB_HIDINPUT=y
-+# CONFIG_HID_FF is not set
-+# CONFIG_USB_HIDDEV is not set
-+# CONFIG_USB_AIPTEK is not set
-+# CONFIG_USB_WACOM is not set
-+# CONFIG_USB_ACECAD is not set
-+# CONFIG_USB_KBTAB is not set
-+# CONFIG_USB_POWERMATE is not set
-+# CONFIG_USB_MTOUCH is not set
-+# CONFIG_USB_ITMTOUCH is not set
-+# CONFIG_USB_EGALAX is not set
-+# CONFIG_USB_XPAD is not set
-+# CONFIG_USB_ATI_REMOTE is not set
-+# CONFIG_USB_KEYSPAN_REMOTE is not set
-+
-+#
-+# USB Imaging devices
-+#
-+# CONFIG_USB_MDC800 is not set
-+# CONFIG_USB_MICROTEK is not set
-+
-+#
-+# USB Multimedia devices
-+#
-+# CONFIG_USB_DABUSB is not set
-+
-+#
-+# Video4Linux support is needed for USB Multimedia device support
-+#
-+
-+#
-+# USB Network Adapters
-+#
-+# CONFIG_USB_CATC is not set
-+# CONFIG_USB_KAWETH is not set
-+# CONFIG_USB_PEGASUS is not set
-+# CONFIG_USB_RTL8150 is not set
-+# CONFIG_USB_USBNET is not set
-+CONFIG_USB_MON=y
-+
-+#
-+# USB port drivers
-+#
-+
-+#
-+# USB Serial Converter support
-+#
-+# CONFIG_USB_SERIAL is not set
-+
-+#
-+# USB Miscellaneous drivers
-+#
-+# CONFIG_USB_EMI62 is not set
-+# CONFIG_USB_EMI26 is not set
-+# CONFIG_USB_AUERSWALD is not set
-+# CONFIG_USB_RIO500 is not set
-+# CONFIG_USB_LEGOTOWER is not set
-+# CONFIG_USB_LCD is not set
-+# CONFIG_USB_LED is not set
-+# CONFIG_USB_CYTHERM is not set
-+# CONFIG_USB_PHIDGETKIT is not set
-+# CONFIG_USB_PHIDGETSERVO is not set
-+# CONFIG_USB_IDMOUSE is not set
-+# CONFIG_USB_LD is not set
-+
-+#
-+# USB DSL modem support
-+#
- 
- #
- # USB Gadget Support
-@@ -602,17 +794,23 @@ CONFIG_USB_ARCH_HAS_HCD=y
- #
- # MMC/SD Card support
- #
--# CONFIG_MMC is not set
-+CONFIG_MMC=y
-+CONFIG_MMC_DEBUG=y
-+CONFIG_MMC_BLOCK=y
-+CONFIG_MMC_PXA=y
-+# CONFIG_MMC_WBSD is not set
- 
- #
- # File systems
- #
- CONFIG_EXT2_FS=y
- # CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
- # CONFIG_EXT3_FS is not set
- # CONFIG_JBD is not set
- # CONFIG_REISERFS_FS is not set
- # CONFIG_JFS_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
- 
- #
- # XFS support
-@@ -620,6 +818,7 @@ CONFIG_EXT2_FS=y
- # CONFIG_XFS_FS is not set
- # CONFIG_MINIX_FS is not set
- # CONFIG_ROMFS_FS is not set
-+CONFIG_INOTIFY=y
- # CONFIG_QUOTA is not set
- CONFIG_DNOTIFY=y
- # CONFIG_AUTOFS_FS is not set
-@@ -636,8 +835,9 @@ CONFIG_DNOTIFY=y
- #
- CONFIG_FAT_FS=y
- CONFIG_MSDOS_FS=y
--# CONFIG_VFAT_FS is not set
-+CONFIG_VFAT_FS=y
- CONFIG_FAT_DEFAULT_CODEPAGE=437
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
- # CONFIG_NTFS_FS is not set
- 
- #
-@@ -645,7 +845,6 @@ CONFIG_FAT_DEFAULT_CODEPAGE=437
- #
- CONFIG_PROC_FS=y
- CONFIG_SYSFS=y
--# CONFIG_DEVFS_FS is not set
- # CONFIG_DEVPTS_FS_XATTR is not set
- # CONFIG_TMPFS is not set
- # CONFIG_HUGETLB_PAGE is not set
-@@ -664,8 +863,7 @@ CONFIG_RAMFS=y
- # CONFIG_JFFS_FS is not set
- CONFIG_JFFS2_FS=y
- CONFIG_JFFS2_FS_DEBUG=0
--# CONFIG_JFFS2_FS_NAND is not set
--# CONFIG_JFFS2_FS_NOR_ECC is not set
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
- # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
- CONFIG_JFFS2_ZLIB=y
- CONFIG_JFFS2_RTIME=y
-@@ -687,6 +885,7 @@ CONFIG_NFS_FS=y
- # CONFIG_NFSD is not set
- CONFIG_ROOT_NFS=y
- CONFIG_LOCKD=y
-+CONFIG_NFS_COMMON=y
- CONFIG_SUNRPC=y
- # CONFIG_RPCSEC_GSS_KRB5 is not set
- # CONFIG_RPCSEC_GSS_SPKM3 is not set
-Index: linux-2.6.19/arch/arm/mach-pxa/Kconfig
-===================================================================
---- linux-2.6.19.orig/arch/arm/mach-pxa/Kconfig
-+++ linux-2.6.19/arch/arm/mach-pxa/Kconfig
-@@ -21,7 +21,7 @@ config MACH_MAINSTONE
- 	select IWMMXT
- 
- config ARCH_PXA_IDP
--	bool "Accelent Xscale IDP"
-+	bool "DevKitIDP PXA255"
- 	select PXA25x
- 
- config PXA_SHARPSL
-Index: linux-2.6.19/drivers/input/keyboard/idpkbd.c
-===================================================================
---- /dev/null
-+++ linux-2.6.19/drivers/input/keyboard/idpkbd.c
-@@ -0,0 +1,418 @@
-+/*
-+ * DevKitIDP PXA255 matrix keyboard driver
-+ * Copyright (C) 2005 BSQUARE
-+ * David Plentovich <davidp@bsquare.com>
-+ *
-+ * Based on (2.4.x) driver/char/asi_keyboard.c - Cliff Brake
-+ */
-+
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ *
-+ */
-+
-+#include <linux/stddef.h>
-+
-+#include <linux/input.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+
-+#include <linux/timer.h>
-+#include <linux/sched.h>
-+#include <linux/delay.h>
-+
-+#include <linux/types.h>
-+#include <linux/keyboard.h>
-+#include <linux/kd.h>
-+
-+#include <asm/irq.h>
-+#include <asm/io.h>
-+
-+//#include <asm/hardware.h>
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/idp.h>
-+
-+MODULE_AUTHOR("David Plentovich <davidp@bsquare.com>");
-+MODULE_DESCRIPTION("DevKitIDP PXA255 matrix keyboard driver");
-+MODULE_LICENSE("GPL");
-+
-+
-+//NOTE: Platform HW specific settings are defined in include/asm-arm/arch-pxa/idp.h
-+
-+
-+// set to true to use timers to poll keyboard
-+#define POLL_KEYBOARD	1
-+
-+
-+// local variables
-+
-+#define FN_KEY_SCANCODE			4		//scancode returned when Fn key pressed
-+#define NUMLOCK_KEY_SCANCODE	10		//scancode returned when NumLock key pressed
-+
-+// keyboard matrix 14 columns by 7 rows
-+static unsigned char idpkbd_keycode[(KEYBD_MATRIX_NUMBER_OUTPUTS * KEYBD_MATRIX_NUMBER_INPUTS)] = { \
-+ KEY_LEFTALT, KEY_GRAVE, 0, KEY_LEFTCTRL, 0, KEY_ESC, KEY_1, KEY_2, KEY_9, KEY_0, KEY_MINUS, KEY_EQUAL, 0, KEY_BACKSPACE, \
-+ 0, KEY_BACKSLASH, KEY_LEFTSHIFT, 0, 0, KEY_DELETE, 0, KEY_T, KEY_Y, KEY_U, KEY_I, KEY_ENTER, KEY_RIGHTSHIFT, KEY_DOWN, \
-+ 0, KEY_TAB, 0, 0, 0, KEY_Q, KEY_W, KEY_E, KEY_R, KEY_O, KEY_P, KEY_LEFTBRACE, 0, KEY_RIGHTBRACE, \
-+ 0, KEY_Z, 0, 0, 0, KEY_CAPSLOCK, 0, 0, KEY_K, KEY_L, KEY_SEMICOLON, KEY_APOSTROPHE, 0, KEY_UP, \
-+ 0, KEY_A, 0, 0, 0, KEY_S, KEY_D, KEY_F, KEY_G, KEY_H, KEY_J, KEY_SLASH, 0, KEY_LEFT, \
-+ 0, KEY_X, 0, 0, 0, KEY_C, KEY_V, KEY_B, KEY_N, KEY_M, KEY_COMMA, KEY_DOT, 0, KEY_SPACE, \
-+ 0, 0, 0, 0, 0, KEY_3, KEY_4, KEY_5, KEY_6, KEY_7, KEY_8, 0, 0, KEY_RIGHT \
-+};
-+
-+// function key keyboard matrix 14 columns by 7 rows
-+//TODO: change Fn key for +/= to be shifted version of KEY_PAUSE (instead of KEY_BACK)
-+static unsigned char idpkbd_fn_keycode[(KEYBD_MATRIX_NUMBER_OUTPUTS * KEYBD_MATRIX_NUMBER_INPUTS)] = { \
-+ 0, 0, 0, 0, 0, 0, KEY_F1, KEY_F2, KEY_F9, KEY_F10, 0, KEY_BACK, 0, 0, \
-+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, KEY_PAGEDOWN, \
-+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, KEY_PAUSE, 0, KEY_SCROLLLOCK, \
-+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, KEY_PRINT, KEY_SYSRQ, 0, KEY_PAGEUP, \
-+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, KEY_HOME, \
-+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
-+ 0, 0, 0, 0, 0, KEY_F3, KEY_F4, KEY_F5, KEY_F6, KEY_F7, KEY_F8, 0, 0, KEY_END \
-+};
-+
-+//NOTE: NUMLOCK and NumKeypad are not supported; keys are already accessable in other ways.
-+
-+int idpkbd_used = 0;
-+int fn_key_active = 0;
-+
-+static struct input_dev * idpkbd_dev;
-+
-+static int scaninterval = HZ/60;	//rate to scan keyboard 
-+static struct timer_list scan_timer;
-+
-+
-+// Note: these are not hardware dependent masks, they are
-+// just simple n-bit masks based on the number of ins and outs
-+// All hardware dependent matrix keyboard stuff is in portable.h
-+#define KEYBD_MATRIX_INPUT_MASK		((1 << KEYBD_MATRIX_NUMBER_INPUTS)-1)
-+#define KEYBD_MATRIX_OUTPUT_MASK	((1 << KEYBD_MATRIX_NUMBER_OUTPUTS)-1)
-+
-+static __u16 keystate_prev[KEYBD_MATRIX_NUMBER_OUTPUTS];
-+static __u16 keystate_test[KEYBD_MATRIX_NUMBER_OUTPUTS];
-+static __u16 keystate_cur [KEYBD_MATRIX_NUMBER_OUTPUTS];
-+static int keystate_prev_active = 0;	//FALSE;
-+static int keystate_stable_ctr = 0;
-+
-+
-+
-+/* local function definitions */
-+static void setoutput(__u16 columns)
-+{
-+	#ifdef KEYBD_MATRIX_INVERT_OUTPUT_LOGIC
-+		KEYBD_MATRIX_SET_OUTPUTS(~columns);
-+	#else
-+		KEYBD_MATRIX_SET_OUTPUTS(columns);
-+	#endif
-+}
-+
-+static __u16 scaninput(void)
-+{
-+	__u32 inputs;
-+
-+	KEYBD_MATRIX_GET_INPUTS(inputs);
-+
-+	#ifdef KEYBD_MATRIX_INVERT_INPUT_LOGIC
-+		return (__u16)(~inputs & KEYBD_MATRIX_INPUT_MASK);
-+	#else
-+		return (__u16)(inputs & KEYBD_MATRIX_INPUT_MASK);
-+	#endif
-+}
-+
-+static int dokeystatetransition(void)
-+{
-+	unsigned char code;
-+	int i, j;
-+	__u16 keystate_xor[KEYBD_MATRIX_NUMBER_OUTPUTS];
-+	int ret_val = 0;	//FALSE;
-+	//int bFoundValidScancode = FALSE;
-+	
-+	/* iterate over columns */
-+	for (i = 0; i < KEYBD_MATRIX_NUMBER_OUTPUTS; i++)
-+	{
-+		if (keystate_cur[i] != 0)
-+			ret_val = 1;	//TRUE;
-+
-+		keystate_xor[i] = keystate_prev[i] ^ keystate_cur[i];
-+		if (keystate_xor[i] != 0)
-+		{
-+			/* at least one matrix switch was changed, set backlight activity detect flag */
-+			//vpDriverGlobals->misc.BacklightActivity = 1;
-+
-+			/* iterate over rows */
-+			for (j = 0; j < KEYBD_MATRIX_NUMBER_INPUTS; j++)
-+			{
-+				if (keystate_xor[i] & (1 << j))
-+				{
-+					code = (j * KEYBD_MATRIX_NUMBER_OUTPUTS) + i;
-+					/* figure out if key is pressed or released and process */
-+
-+					// support alt keymap for function keys
-+					if (code == FN_KEY_SCANCODE)
-+					{
-+						fn_key_active = (keystate_cur[i] & (1 << j)) ? 1 : 0;
-+					}
-+					else
-+					{
-+						if (fn_key_active)
-+						{
-+//							printk("matrix %i, key %i, up/down %i\n", code, idpkbd_fn_keycode[code], (keystate_cur[i] & (1 << j)) ? 1 : 0);
-+							input_report_key(idpkbd_dev, idpkbd_fn_keycode[code], (keystate_cur[i] & (1 << j)) ? 1 : 0);
-+						}
-+						else
-+						{
-+//							printk("matrix %i, key %i, up/down %i\n", code, idpkbd_keycode[code], (keystate_cur[i] & (1 << j)) ? 1 : 0);
-+							input_report_key(idpkbd_dev, idpkbd_keycode[code], (keystate_cur[i] & (1 << j)) ? 1 : 0);
-+						}
-+					}
-+
-+				}
-+			}
-+			input_sync(idpkbd_dev);
-+		}
-+		keystate_prev[i] = keystate_cur[i];
-+	}
-+
-+	return ret_val;
-+}
-+
-+
-+// handles keyboard keypress
-+#if POLL_KEYBOARD
-+static void idpkbd_scan_keyboard(unsigned long dummy)
-+{
-+	__u16 cs;		/* column status */
-+	int i;
-+//	printk(KERN_INFO "%s:\n", __FUNCTION__);
-+
-+#define SCAN_START	0	/* start of scan state machine */
-+#define SCAN_GETSTATE	1	/* get keyboard state */
-+#define SCAN_STAB	2	/* wait for key to stabalize */
-+
-+	/* start of keyboard scanning sequence */
-+	/* Always start with an all-column scan */
-+	setoutput( KEYBD_MATRIX_OUTPUT_MASK );
-+	udelay( KEYBD_MATRIX_SETTLING_TIME_US );
-+	cs = scaninput();
-+
-+//	printk("cs = %x\n", cs);
-+//	printk("keystate_stable_ctr = %d\n", keystate_stable_ctr);
-+//	printk("keystate_pre_active = %d\n", keystate_prev_active);
-+//	printk("\n");
-+
-+	/* 
-+	 * if no keys were down in previous state AND we are
-+	 * not in stablizing mode AND the all-column scan
-+	 * is 0, then keyboard is idle.
-+	 */
-+
-+	if ((! keystate_prev_active) && (keystate_stable_ctr == 0) && (cs == 0))
-+		goto scan_done;
-+
-+	/* Get the current state of the keyboard */
-+	if (cs == 0)
-+	{
-+		for (i = 0; i < KEYBD_MATRIX_NUMBER_OUTPUTS; i++)
-+		{
-+			keystate_cur[i] = 0;
-+		}
-+	}
-+	else
-+	{
-+		for (i = 0; i < KEYBD_MATRIX_NUMBER_OUTPUTS; i++)
-+		{
-+			setoutput ( 1 << i );
-+			udelay(KEYBD_MATRIX_SETTLING_TIME_US);
-+			keystate_cur[i] = scaninput();
-+		}
-+	}
-+
-+	/* Handle the stablizing case first */
-+	if (keystate_stable_ctr > 0)
-+	{
-+
-+		/* Compare the current state against the test state */
-+		cs = 1;
-+		for (i = 0; i < KEYBD_MATRIX_NUMBER_OUTPUTS; i++)
-+		{
-+			if (keystate_cur[i] != keystate_test[i])
-+			{
-+				cs = 0;
-+				break;
-+			}
-+		}
-+
-+		// Are the states the same ?
-+		if (cs)
-+		{
-+			++ keystate_stable_ctr;
-+			if (keystate_stable_ctr == KEYBD_MATRIX_KEYSTATE_DEBOUNCE_CONSTANT)
-+			{
-+				keystate_prev_active = dokeystatetransition();
-+				keystate_stable_ctr = 0;
-+			}
-+			goto scan_done;
-+		}
-+		else
-+		{
-+			keystate_stable_ctr = 0;		// Clear stable counter and fall through to next stage
-+		}
-+	}
-+
-+	// Compare the current state against the previous state
-+	cs = 1;
-+	for (i = 0; i < KEYBD_MATRIX_NUMBER_OUTPUTS; i++)
-+	{
-+		if (keystate_cur[i] != keystate_prev[i])
-+		{
-+			cs = 0;
-+			break;
-+		}
-+	}
-+
-+	// If the states are different, begin waiting for stablizing
-+	if (! cs)
-+	{
-+		for (i = 0; i < KEYBD_MATRIX_NUMBER_OUTPUTS; i++)
-+		{
-+			keystate_test[i] = keystate_cur[i];
-+		}
-+		keystate_stable_ctr = 1;
-+	}
-+
-+scan_done:
-+	// reload timer for next scan
-+	mod_timer(&scan_timer, jiffies + scaninterval);
-+}
-+#else
-+static void idpkbd_interrupt(int irq, void *dummy, struct pt_regs *fp)
-+{
-+//	printk(KERN_INFO "%s:\n", __FUNCTION__);
-+
-+	input_report_key(idpkbd_dev, BTN_0, inb(IDPKBD_PORT) & 1);
-+	input_sync(idpkbd_dev);
-+}
-+#endif
-+
-+//TODO: Verify Events operation
-+// handles keyboard LED and beep events
-+int idpkbd_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
-+{
-+//	printk(KERN_INFO "%s:\n", __FUNCTION__);
-+
-+	if (type == EV_SND && code == SND_BELL) {
-+//x		outb(value, IDPKBD_BELL);
-+		return 0;
-+	}
-+
-+	if (type == EV_LED) {
-+// TODO:
-+		return 0;
-+	}
-+
-+	return -1;
-+}
-+
-+static int idpkbd_open(struct input_dev *dev)
-+{
-+//	printk(KERN_INFO "%s:\n", __FUNCTION__);
-+
-+	if (idpkbd_used++)
-+		return 0;
-+
-+#if POLL_KEYBOARD
-+	// start timer to scan matrix keyboard
-+	init_timer(&scan_timer);
-+	scan_timer.function = idpkbd_scan_keyboard;
-+	mod_timer(&scan_timer, jiffies + scaninterval);
-+#else	
-+	if (request_irq(IDPKBD_IRQ, idpkbd_interrupt, 0, "idpkbd", NULL)) {
-+                printk(KERN_ERR "idpkbd.c: Can't allocate irq %d\n", idpkbd_irq);
-+                idpkbd_used--;
-+                return -EBUSY;
-+        }
-+#endif
-+
-+        return 0;
-+}
-+
-+static void idpkbd_close(struct input_dev *dev)
-+{
-+//	printk(KERN_INFO "%s:\n", __FUNCTION__);
-+
-+	if (!--idpkbd_used) {
-+#if POLL_KEYBOARD
-+		// stop timer 
-+		del_timer(&scan_timer);
-+#else
-+		free_irq(IDPKBD_IRQ, idpkbd_interrupt);
-+#endif
-+	}
-+}
-+
-+static int __init idpkbd_init(void)
-+{
-+	int i;
-+//	printk(KERN_INFO "%s:\n", __FUNCTION__);
-+
-+  idpkbd_dev = input_allocate_device();
-+
-+	// fill in driver information
-+	idpkbd_dev->name = "DevKitIDP PXA255 matrix keyboard";
-+	idpkbd_dev->phys = "idpkdb/input0";
-+//	idpkbd_dev.id.bustype = BUS_MATRIX;
-+	idpkbd_dev->id.vendor = 0x0001;
-+	idpkbd_dev->id.product = 0x0001;
-+	idpkbd_dev->id.version = 0x0100;
-+
-+	// fill in function pointers
-+	idpkbd_dev->open = idpkbd_open;
-+	idpkbd_dev->close = idpkbd_close;
-+	idpkbd_dev->event = idpkbd_event;
-+
-+	// setup available keypresses
-+	idpkbd_dev->evbit[0] = BIT(EV_KEY);
-+//	idpkbd_dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
-+	idpkbd_dev->keycode = idpkbd_keycode;
-+	idpkbd_dev->keycodesize = sizeof(unsigned char);
-+//	idpkbd_dev.keycodemax = ARRAY_SIZE(idpkbd_keycode);
-+	idpkbd_dev->keycodemax = ARRAY_SIZE(idpkbd_keycode) + ARRAY_SIZE(idpkbd_fn_keycode);
-+
-+	for (i = 0; i < (KEYBD_MATRIX_NUMBER_OUTPUTS * KEYBD_MATRIX_NUMBER_INPUTS); i++)
-+	{
-+		if (idpkbd_keycode[i])
-+			set_bit(idpkbd_keycode[i], idpkbd_dev->keybit);
-+		if (idpkbd_fn_keycode[i])
-+			set_bit(idpkbd_fn_keycode[i], idpkbd_dev->keybit);
-+	}
-+
-+	input_register_device(idpkbd_dev);
-+	
-+	printk(KERN_INFO "input: %s\n", idpkbd_dev->name);
-+	return 0;
-+}
-+
-+static void __exit idpkbd_exit(void)
-+{
-+//	printk(KERN_INFO "%s:\n", __FUNCTION__);
-+
-+	input_unregister_device(idpkbd_dev);
-+}
-+
-+module_init(idpkbd_init);
-+module_exit(idpkbd_exit);
-+
-+
-Index: linux-2.6.19/drivers/input/keyboard/Kconfig
-===================================================================
---- linux-2.6.19.orig/drivers/input/keyboard/Kconfig
-+++ linux-2.6.19/drivers/input/keyboard/Kconfig
-@@ -203,4 +203,14 @@ config KEYBOARD_OMAP
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called omap-keypad.
- 
-+config KEYBOARD_IDPKBD
-+	tristate "IDP matrix scan keyboard"
-+	depends on ARCH_PXA_IDP && INPUT && INPUT_KEYBOARD
-+	help
-+	  Say Y here if you are running Linux on a DevKitIDP PXA255 and want
-+	  to use the attached matrix scan keyboard.
-+
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called idpkbd.
-+
- endif
-Index: linux-2.6.19/drivers/input/keyboard/Makefile
-===================================================================
---- linux-2.6.19.orig/drivers/input/keyboard/Makefile
-+++ linux-2.6.19/drivers/input/keyboard/Makefile
-@@ -4,6 +4,7 @@
- 
- # Each configuration option enables a list of files.
- 
-+obj-$(CONFIG_KEYBOARD_IDPKBD)		+= idpkbd.o
- obj-$(CONFIG_KEYBOARD_ATKBD)		+= atkbd.o
- obj-$(CONFIG_KEYBOARD_SUNKBD)		+= sunkbd.o
- obj-$(CONFIG_KEYBOARD_LKKBD)		+= lkkbd.o
-Index: linux-2.6.19/drivers/pcmcia/Makefile
-===================================================================
---- linux-2.6.19.orig/drivers/pcmcia/Makefile
-+++ linux-2.6.19/drivers/pcmcia/Makefile
-@@ -68,5 +68,6 @@ sa1100_cs-$(CONFIG_SA1100_SIMPAD)		+= sa
- 
- pxa2xx_cs-$(CONFIG_ARCH_LUBBOCK)		+= pxa2xx_lubbock.o sa1111_generic.o
- pxa2xx_cs-$(CONFIG_MACH_MAINSTONE)		+= pxa2xx_mainstone.o
-+pxa2xx_cs-$(CONFIG_ARCH_PXA_IDP)		+= pxa2xx_idp.o
- pxa2xx_cs-$(CONFIG_PXA_SHARPSL)			+= pxa2xx_sharpsl.o
- 
-Index: linux-2.6.19/drivers/pcmcia/pxa2xx_idp.c
-===================================================================
---- /dev/null
-+++ linux-2.6.19/drivers/pcmcia/pxa2xx_idp.c
-@@ -0,0 +1,392 @@
-+/*
-+ * linux/drivers/pcmcia/pxa2xx_idp.c
-+ *
-+ * DevKitIDP PXA255 PCMCIA specific routines.
-+ * Copyright (C) 2005 BSQUARE
-+ * David Plentovich <davidp@bsquare.com>
-+ *
-+ * Based on pxa2xx_mainstone.c - Nicolas Pitre
-+ * Based on (2.4.x) driver/pcmcia/pxa/pxa_idp.c - Jeff Sutherland
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/errno.h>
-+#include <linux/interrupt.h>
-+#include <linux/device.h>
-+#include <linux/delay.h>
-+#include <linux/platform_device.h>
-+
-+#include <pcmcia/ss.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/idp.h>
-+
-+#include "soc_common.h"
-+
-+#define IDP_S0_CD_IRQ	PCMCIA_S0_CD_VALID
-+#define IDP_S1_CD_IRQ	PCMCIA_S1_CD_VALID
-+#define IDP_S0_IRQ	PCMCIA_S0_RDYINT
-+#define IDP_S1_IRQ	PCMCIA_S1_RDYINT
-+
-+static struct pcmcia_irqs irqs[] = {
-+	{ 0, IDP_S0_CD_IRQ, "PCMCIA0 CD" },
-+	{ 1, IDP_S1_CD_IRQ, "PCMCIA1 CD" },
-+};
-+
-+
-+static int idp_pcmcia_hw_init_cnt = 0;
-+
-+
-+static int idp_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-+{
-+	printk("%s: socket %i\n", __FUNCTION__, skt->nr);	//dcp
-+
-+	if (!idp_pcmcia_hw_init_cnt++)
-+	{
-+	  	/* Set PCMCIA Socket 0 power to standby mode.
-+		*  PXA IDP has dedicated CPLD pins for all this stuff :-)
-+	   	*/
-+		IDP_CPLD_PCCARD_EN = PCC0_ENABLE | PCC1_ENABLE;	//both slots disabled, reset NOT active
-+		IDP_CPLD_PCCARD_PWR = 0; //all power to both slots off
-+	
-+		/*
-+		 * Setup default state of GPIO outputs
-+		 * before we enable them as outputs.
-+		 */
-+		GPSR(GPIO48_nPOE) =
-+			GPIO_bit(GPIO48_nPOE) |
-+			GPIO_bit(GPIO49_nPWE) |
-+			GPIO_bit(GPIO50_nPIOR) |
-+			GPIO_bit(GPIO51_nPIOW) |
-+			GPIO_bit(GPIO52_nPCE_1) |
-+			GPIO_bit(GPIO53_nPCE_2);
-+
-+		pxa_gpio_mode(GPIO48_nPOE_MD);
-+		pxa_gpio_mode(GPIO49_nPWE_MD);
-+		pxa_gpio_mode(GPIO50_nPIOR_MD);
-+		pxa_gpio_mode(GPIO51_nPIOW_MD);
-+		pxa_gpio_mode(GPIO52_nPCE_1_MD);
-+		pxa_gpio_mode(GPIO53_nPCE_2_MD);
-+		pxa_gpio_mode(GPIO54_pSKTSEL_MD);
-+		pxa_gpio_mode(GPIO55_nPREG_MD);
-+		pxa_gpio_mode(GPIO56_nPWAIT_MD);
-+		pxa_gpio_mode(GPIO57_nIOIS16_MD);
-+
-+#if 0	//x	
-+		GPDR(IRQ_TO_GPIO_2_80(PCMCIA_S0_CD_VALID)) &= ~GPIO_bit(IRQ_TO_GPIO_2_80(PCMCIA_S0_CD_VALID));
-+		GPDR(IRQ_TO_GPIO_2_80(PCMCIA_S1_CD_VALID)) &= ~GPIO_bit(IRQ_TO_GPIO_2_80(PCMCIA_S1_CD_VALID));
-+
-+		set_GPIO_IRQ_edge(IRQ_TO_GPIO_2_80(PCMCIA_S0_CD_VALID), GPIO_BOTH_EDGES);
-+		set_GPIO_IRQ_edge(IRQ_TO_GPIO_2_80(PCMCIA_S1_CD_VALID), GPIO_BOTH_EDGES);
-+
-+		//irq's for slots:
-+		GPDR(IRQ_TO_GPIO_2_80(PCMCIA_S0_RDYINT)) &= ~GPIO_bit(IRQ_TO_GPIO_2_80(PCMCIA_S0_RDYINT));
-+		GPDR(IRQ_TO_GPIO_2_80(PCMCIA_S1_RDYINT)) &= ~GPIO_bit(IRQ_TO_GPIO_2_80(PCMCIA_S1_RDYINT));
-+
-+		set_GPIO_IRQ_edge(IRQ_TO_GPIO_2_80(PCMCIA_S0_RDYINT), GPIO_FALLING_EDGE);
-+		set_GPIO_IRQ_edge(IRQ_TO_GPIO_2_80(PCMCIA_S1_RDYINT), GPIO_FALLING_EDGE);
-+#endif	//x
-+	}
-+
-+#if 0	//x
-+	return_val = request_irq(PCMCIA_S0_CD_VALID, init->handler, SA_INTERRUPT, "PXA PCMCIA CD0", NULL);
-+
-+	if (return_val < 0)
-+		return -1;
-+	
-+	return_val += request_irq(PCMCIA_S1_CD_VALID, init->handler, SA_INTERRUPT, "PXA PCMCIA CD1", NULL);
-+	
-+	if (return_val < 0) {
-+		free_irq(PCMCIA_S0_CD_VALID, NULL);
-+		return -1;
-+	}
-+
-+	return 2;
-+
-+#endif	//x
-+	skt->irq = (skt->nr == 0) ? IDP_S0_IRQ : IDP_S1_IRQ;
-+	return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
-+}
-+
-+static void idp_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-+{
-+//x	free_irq(PCMCIA_S0_CD_VALID, NULL);
-+//x	free_irq(PCMCIA_S1_CD_VALID, NULL);
-+
-+	printk("%s: socket %i\n", __FUNCTION__, skt->nr);	//dcp
-+
-+	soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
-+
-+	if (!--idp_pcmcia_hw_init_cnt)
-+	{
-+		IDP_CPLD_PCCARD_EN = 0x03;	//disable slots
-+		udelay(200);
-+		IDP_CPLD_PCCARD_PWR = 0; //shut off all power
-+	}
-+}
-+
-+//x static unsigned long idp_pcmcia_status[2];
-+
-+static void idp_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-+				    struct pcmcia_state *state)
-+{
-+	unsigned long status;
-+	volatile unsigned long *stat_regs[2] = { &IDP_CPLD_PCCARD0_STATUS, &IDP_CPLD_PCCARD1_STATUS };
-+//	printk("%s: socket %i\n", __FUNCTION__, skt->nr);	//dcp
-+
-+//x	status = (skt->nr == 0) ? IDP_PCMCIA0 : IDP_PCMCIA1;
-+	status = *stat_regs[skt->nr];
-+//x	flip = (status ^ idp_pcmcia_status[skt->nr]) & IDP_PCMCiIA_nSTSCHG_BVD1;
-+
-+#if 0	//x
-+	/*
-+	 * Workaround for STSCHG which can't be deasserted:
-+	 * We therefore disable/enable corresponding IRQs
-+	 * as needed to avoid IRQ locks.
-+	 */
-+	if (flip) {
-+		idp_pcmcia_status[skt->nr] = status;
-+		if (status & IDP_PCMCIA_nSTSCHG_BVD1)
-+			enable_irq( (skt->nr == 0) ? IDP_S0_STSCHG_IRQ
-+						   : IDP_S1_STSCHG_IRQ );
-+		else
-+			disable_irq( (skt->nr == 0) ? IDP_S0_STSCHG_IRQ
-+						    : IDP_S1_STSCHG_IRQ );
-+	}
-+#endif	//x
-+
-+//x	state->detect = (status & IDP_PCMCIA_nCD) ? 0 : 1;
-+	state->detect = (PCC_DETECT(skt->nr)) ? 0 : 1;		// this one is gpio
-+	state->ready  = (status & _PCC_IRQ) ? 1 : 0;
-+	state->bvd1   = (status & PCC_BVD1) ? 1 : 0;
-+	state->bvd2   = (status & PCC_BVD2) ? 1 : 0;
-+	state->wrprot = (status & _PCC_WRPROT) ? 1 : 0;
-+	state->vs_3v  = (status & PCC_VS1) ? 0 : 1;
-+	state->vs_Xv  = (status & PCC_VS2) ? 0 : 1;
-+
-+#if 0	
-+		printk("%s: Sock %u flags: %s%s%s%s%s%s%s\n",__FUNCTION__,skt->nr,
-+				(state->detect) ? "DET " : "",
-+				(state->ready) ? "RDY " : "",
-+				(state->bvd1) ? "BVD1 " : "",
-+				(state->bvd2) ? "BVD2 " : "",
-+				(state->wrprot) ? "WRPROT " : "",
-+				(state->vs_3v) ? "VS_3V " : "",
-+				(state->vs_Xv) ? "VS_XV " : "");
-+#endif
-+}
-+
-+static int idp_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-+				       const socket_state_t *state)
-+{
-+  /* The PXA Idp uses the Maxim MAX1602, with the following connections:
-+   *
-+   * Socket 0 (PCMCIA):
-+   *	MAX1602	PXA_IDP		Register
-+   *	Pin	Signal  	IDP_CPLD_PCCARD_PWR:
-+   *	-----	-------		----------------------
-+   *	A0VPP	PCC0_PWR0	bit0
-+   *	A1VPP	PCC0_PWR1	bit1	
-+   *	A0VCC	PCC0_PWR2	bit2
-+   *	A1VCC	PCC0_PWR3	bit3
-+   *	VX	VCC
-+   *	VY	+3.3V
-+   *	12IN	+12V
-+   *	CODE	+3.3V		Cirrus  Code, CODE = High (VY)
-+   *
-+   * Socket 1 (PCMCIA):
-+   *	MAX1602	PXA_IDP		Register
-+   *	Pin	Signal		IDP_CPLD_PCCARD_PWR:
-+   *	-----	-------		----------------------
-+   *	A0VPP	PCC1_PWR0	bit4
-+   *	A1VPP	PCC1_PWR1	bit5
-+   *	A0VCC	PCC1_PWR2	bit6
-+   *	A1VCC	PCC1_PWR3	bit7
-+   *	VX	VCC
-+   *	VY	+3.3V
-+   *	12IN	+12V		
-+   *	CODE	+3.3V		Cirrus  Code, CODE = High (VY)
-+   *
-+   */
-+
-+	printk("%s: socket %i %i %i\n", __FUNCTION__, skt->nr, state->Vcc, state->Vpp);	//dcp
-+
-+	switch (skt->nr) {
-+		case 0:
-+			switch (state->Vcc) {
-+			    case 0:
-+					IDP_CPLD_PCCARD_EN |= PCC0_ENABLE; // disable socket
-+					udelay(200);
-+					IDP_CPLD_PCCARD_PWR &= ~(PCC0_PWR2 | PCC0_PWR3);
-+					break;
-+
-+			    case 33:
-+					IDP_CPLD_PCCARD_PWR &= ~(PCC0_PWR2 | PCC0_PWR3);
-+					IDP_CPLD_PCCARD_PWR |= PCC0_PWR3;
-+					IDP_CPLD_PCCARD_EN &= ~PCC0_ENABLE; //turn it on
-+					break;
-+
-+			    case 50:
-+					IDP_CPLD_PCCARD_PWR &= ~(PCC0_PWR2 | PCC0_PWR3);
-+					IDP_CPLD_PCCARD_PWR |= PCC0_PWR2;
-+					IDP_CPLD_PCCARD_EN &= ~PCC0_ENABLE;
-+					break;
-+
-+			    default:
-+			 		printk(KERN_ERR "%s(): bad Vcc %u\n", __FUNCTION__, state->Vcc);
-+					return -1;
-+			}
-+
-+			switch (state->Vpp) {
-+			    case 0:
-+					IDP_CPLD_PCCARD_PWR &= ~(PCC0_PWR0 | PCC0_PWR1);
-+					break;
-+
-+			    case 120:
-+					IDP_CPLD_PCCARD_PWR &= ~(PCC0_PWR0 | PCC0_PWR1);
-+					IDP_CPLD_PCCARD_PWR |= PCC0_PWR1;
-+					break;
-+
-+			    default:
-+				  	if(state->Vpp == state->Vcc) {
-+						IDP_CPLD_PCCARD_PWR = (IDP_CPLD_PCCARD_PWR & ~(PCC0_PWR0 | PCC0_PWR1)) | PCC0_PWR0;
-+					}
-+					else {
-+						printk(KERN_ERR "%s(): bad Vpp %u\n", __FUNCTION__, state->Vpp);
-+						return -1;
-+					}
-+			}
-+	
-+			if (state->flags & SS_RESET) {
-+				IDP_CPLD_PCCARD_EN = (IDP_CPLD_PCCARD_EN | PCC0_RESET);
-+				printk("RESET\n");
-+				}
-+			else
-+				IDP_CPLD_PCCARD_EN = (IDP_CPLD_PCCARD_EN & ~PCC0_RESET);
-+
-+	    	break;
-+
-+		case 1:
-+			switch (state->Vcc) {
-+		    	case 0:
-+					IDP_CPLD_PCCARD_EN |= PCC1_ENABLE; // disable socket
-+					udelay(200);
-+					IDP_CPLD_PCCARD_PWR &= ~(PCC1_PWR2 | PCC1_PWR3);
-+					break;
-+
-+			    case 33:
-+					IDP_CPLD_PCCARD_PWR &= ~(PCC1_PWR2 | PCC1_PWR3);
-+					IDP_CPLD_PCCARD_PWR |= PCC1_PWR3;
-+					IDP_CPLD_PCCARD_EN &= ~PCC1_ENABLE; //turn it on
-+					break;
-+
-+			    case 50:
-+					IDP_CPLD_PCCARD_PWR &= ~(PCC1_PWR2 | PCC1_PWR3);
-+					IDP_CPLD_PCCARD_PWR |= PCC1_PWR2;
-+					IDP_CPLD_PCCARD_EN &= ~PCC1_ENABLE;
-+					break;
-+
-+			    default:
-+				 	printk(KERN_ERR "%s(): bad Vcc %u\n", __FUNCTION__, state->Vcc);
-+					return -1;
-+			}
-+
-+			switch (state->Vpp) {
-+			    case 0:
-+					IDP_CPLD_PCCARD_PWR &= ~(PCC1_PWR0 | PCC1_PWR1);
-+				break;
-+
-+			    case 120:
-+					IDP_CPLD_PCCARD_PWR &= ~(PCC1_PWR0 | PCC1_PWR1);
-+					IDP_CPLD_PCCARD_PWR |= PCC1_PWR1;
-+					break;
-+
-+			    default:
-+			  		if(state->Vpp == state->Vcc) {
-+						IDP_CPLD_PCCARD_PWR = (IDP_CPLD_PCCARD_PWR & ~(PCC1_PWR0 | PCC1_PWR1)) | PCC1_PWR0;
-+					}
-+					else {
-+				  		printk(KERN_ERR "%s(): bad Vpp %u\n", __FUNCTION__, state->Vpp);
-+						return -1;
-+					}
-+			}
-+		
-+			if (state->flags & SS_RESET) {
-+				IDP_CPLD_PCCARD_EN = (IDP_CPLD_PCCARD_EN | PCC1_RESET);
-+				printk("RESET\n");
-+				}
-+			else
-+				IDP_CPLD_PCCARD_EN = (IDP_CPLD_PCCARD_EN & ~PCC1_RESET);
-+
-+		    break;
-+	}
-+	return 0;
-+}
-+
-+static void idp_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
-+{
-+	printk("%s: socket %i\n", __FUNCTION__, skt->nr);	//dcp
-+}
-+
-+static void idp_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
-+{
-+	printk("%s: socket %i\n", __FUNCTION__, skt->nr);	//dcp
-+}
-+
-+static struct pcmcia_low_level idp_pcmcia_ops = {
-+	.owner			= THIS_MODULE,
-+	.hw_init		= idp_pcmcia_hw_init,
-+	.hw_shutdown		= idp_pcmcia_hw_shutdown,
-+	.socket_state		= idp_pcmcia_socket_state,
-+	.configure_socket	= idp_pcmcia_configure_socket,
-+	.socket_init		= idp_pcmcia_socket_init,
-+	.socket_suspend		= idp_pcmcia_socket_suspend,
-+	.nr			= 2,
-+};
-+
-+static struct platform_device *idp_pcmcia_device;
-+
-+static int __init idp_pcmcia_init(void)
-+{
-+	int ret;
-+	printk("%s\n", __FUNCTION__);	//dcp
-+
-+	idp_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-+	if (!idp_pcmcia_device)
-+		return -ENOMEM;
-+	memset(idp_pcmcia_device, 0, sizeof(*idp_pcmcia_device));
-+	idp_pcmcia_device->name = "pxa2xx-pcmcia";
-+	idp_pcmcia_device->dev.platform_data = &idp_pcmcia_ops;
-+
-+	ret = platform_device_register(idp_pcmcia_device);
-+	if (ret)
-+		kfree(idp_pcmcia_device);
-+
-+	return ret;
-+}
-+
-+static void __exit idp_pcmcia_exit(void)
-+{
-+	printk("%s\n", __FUNCTION__);	//dcp
-+	/*
-+	 * This call is supposed to free our idp_pcmcia_device.
-+	 * Unfortunately platform_device don't have a free method, and
-+	 * we can't assume it's free of any reference at this point so we
-+	 * can't free it either.
-+	 */
-+	platform_device_unregister(idp_pcmcia_device);
-+}
-+
-+module_init(idp_pcmcia_init);
-+module_exit(idp_pcmcia_exit);
-+
-+MODULE_LICENSE("GPL");
-Index: linux-2.6.19/include/asm-arm/arch-pxa/idp.h
-===================================================================
---- linux-2.6.19.orig/include/asm-arm/arch-pxa/idp.h
-+++ linux-2.6.19/include/asm-arm/arch-pxa/idp.h
-@@ -179,15 +179,15 @@
- #define KEYBD_MATRIX_NUMBER_INPUTS	7
- #define KEYBD_MATRIX_NUMBER_OUTPUTS	14
- 
--#define KEYBD_MATRIX_INVERT_OUTPUT_LOGIC	FALSE
--#define KEYBD_MATRIX_INVERT_INPUT_LOGIC		FALSE
-+#undef KEYBD_MATRIX_INVERT_OUTPUT_LOGIC
-+#undef KEYBD_MATRIX_INVERT_INPUT_LOGIC
- 
--#define KEYBD_MATRIX_SETTLING_TIME_US			100
-+#define KEYBD_MATRIX_SETTLING_TIME_US			40
- #define KEYBD_MATRIX_KEYSTATE_DEBOUNCE_CONSTANT		2
- 
- #define KEYBD_MATRIX_SET_OUTPUTS(outputs) \
- {\
--	IDP_CPLD_KB_COL_LOW = outputs;\
-+	IDP_CPLD_KB_COL_LOW = outputs & 0x7f;\
- 	IDP_CPLD_KB_COL_HIGH = outputs >> 7;\
- }
-