diff options
author | Andreas Müller <schnitzeltony@gmx.de> | 2011-06-07 05:25:44 +0000 |
---|---|---|
committer | Eric Bénard <eric@eukrea.com> | 2011-06-16 09:59:05 +0200 |
commit | 0de87683a678bbd3aa4d798acc77fbeae5469afb (patch) | |
tree | 4899b8db494a1b9937c39f04453dffcb4eb4a58d /conf/machine | |
parent | e16a751548cb72020bdfc33f8c2b03496dbd85e9 (diff) | |
download | openembedded-0de87683a678bbd3aa4d798acc77fbeae5469afb.tar.gz |
mx28 SOC: set correct addresses for u-boot
The initial patch was build tested only because a hardware for tests was not
available at the time initial patches were sent. The modifications lead to the
following boot log (thanks to Christian Borutta for testing):
U-Boot 2009.08 (May 09 2011 - 16:42:53)
Freescale i.MX28 family
CPU: 454 MHz
BUS: 151 MHz
EMI: 205 MHz
GPMI: 24 MHz
DRAM: 128 MB
MMC: IMX_SSP_MMC: 0, IMX_SSP_MMC: 1
In: serial
Out: serial
Err: serial
Net: got MAC address from IIM: 00:04:9f:01:4d:57
FEC0
Hit any key to stop autoboot: 0
reading uImage
2519812 bytes read
Image Name: Angstrom/2.6.35/mx28evk
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2519748 Bytes = 2.4 MB
Load Address: 40008000
Entry Point: 40008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Linux version 2.6.35.3 (borutta@debian) (gcc version 4.5.3 20110311 (prerelease) (GCC) ) #1 PREEMPT Thu May 12 09:54:03 CEST 2011
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
CPU: VIVT data cache, VIVT instruction cache
Machine: Freescale MX28EVK board
...
Signed-off-by: Andreas Mueller <schnitzeltony@gmx.de>
Signed-off-by: Eric Bénard <eric@eukrea.com>
Diffstat (limited to 'conf/machine')
-rw-r--r-- | conf/machine/include/imx28.inc | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/conf/machine/include/imx28.inc b/conf/machine/include/imx28.inc index 38248a8f9a..b50f000a3b 100644 --- a/conf/machine/include/imx28.inc +++ b/conf/machine/include/imx28.inc @@ -10,8 +10,8 @@ MACHINE_KERNEL_PR = "r0" KERNEL_IMAGETYPE = "uImage" -UBOOT_ENTRYPOINT = "0x8000" -UBOOT_LOADADDRESS = "0x8000" +UBOOT_ENTRYPOINT = "0x40008000" +UBOOT_LOADADDRESS = "0x40008000" EXTRA_IMAGEDEPENDS += "u-boot" |