From 84c83737f11cd993b56678ca3520258326d1462b Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Thu, 14 Feb 2008 12:57:18 +0000 Subject: Add README.hardware git-svn-id: https://svn.o-hand.com/repos/poky/trunk@3801 311d38ba-8fff-0310-9ca6-ca027cbcb966 --- README.hardware | 344 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 344 insertions(+) create mode 100644 README.hardware (limited to 'README.hardware') diff --git a/README.hardware b/README.hardware new file mode 100644 index 0000000000..2039b19e10 --- /dev/null +++ b/README.hardware @@ -0,0 +1,344 @@ + Poky Hardware Reference Guide + ============================= + +This file gives details about using Poky with different hardware reference +boards and consumer devices. A full list of target machines can be found by +looking in the meta/conf/machine/ directory. If in doubt about using Poky with +your hardware, consult the documentation for your board/device. To discuss +support for further hardware reference boards/devices please contact OpenedHand. + +QEMU Emulation Images (qemuarm and qemux86) +=========================================== + +To simplify development Poky supports building images to work with the QEMU +emulator in system emulation mode. Two architectures are currently supported, +ARM (via qemuarm) and x86 (via qemux86). Use of the QEMU images is covered +in the Poky Handbook. + +Hardware Reference Boards +========================= + +The following boards are supported by Poky: + + * Compulab CM-X270 (cm-x270) + * Compulab EM-X270 (em-x270) + * FreeScale iMX31ADS (mx31ads) + * Marvell PXA3xx Zylonite (zylonite) + * Logic iMX31 Lite Kit (mx31lite) + * Phytec phyCORE-iMX31 (mx31phy) + +For more information see board's section below. The Poky MACHINE setting +corresponding to the board is given in brackets. + +Consumer Devices +================ + +The following consumer devices are supported by Poky: + + * FIC Neo1973 GTA01 smartphone (fic-gta01) + * HTC Universal (htcuniversal) + * Nokia 770/N800/N810 Internet Tablets (nokia770 and nokia800) + * Sharp Zaurus SL-C7x0 series (c7x0) + * Sharp Zaurus SL-C1000 (akita) + * Sharp Zaurus SL-C3x00 series (spitz) + +For more information see board's section below. The Poky MACHINE setting +corresponding to the board is given in brackets. + +Poky Boot CD (bootcdx86) +======================== + +The Poky boot CD iso images are designed as a demonstration of the Poky +environment and to show the versatile image formats Poky can generate. It will +run on Pentium2 or greater PC style computers. The iso image can be +burnt to CD and then booted from. + + + Hardware Reference Boards + ========================= + +Compulab CM-X270 (cm-x270) +========================== + +The bootloader on this board doesn't support writing jffs2 images directly to +NAND and normally uses a proprietary kernel flash driver. To allow the use of +jffs2 images, a two stage updating procedure is needed. Firstly, an initramfs +is booted which contains mtd utilities and this is then used to write the main +filesystem. + +It is assumed the board is connected to a network where a TFTP server is +available and that a serial terminal is available to communicate with the +bootloader (38400, 8N1). If a DHCP server is available the device will use it +to obtain an IP address. If not, run: + + ARMmon > setip dhcp off + ARMmon > setip ip 192.168.1.203 + ARMmon > setip mask 255.255.255.0 + +To reflash the kernel: + + ARMmon > download kernel tftp zimage 192.168.1.202 + ARMmon > flash kernel + +where zimage is the name of the kernel on the TFTP server and its IP address is +192.168.1.202. The names of the files must be all lowercase. + +To reflash the initrd/initramfs: + + ARMmon > download ramdisk tftp diskimage 192.168.1.202 + ARMmon > flash ramdisk + +where diskimage is the name of the initramfs image (a cpio.gz file). + +To boot the initramfs: + + ARMmon > ramdisk on + ARMmon > bootos "console=ttyS0,38400 rdinit=/sbin/init" + +To reflash the main image login to the system as user "root", then run: + + # ifconfig eth0 192.168.1.203 + # tftp -g -r mainimage 192.168.1.202 + # flash_eraseall /dev/mtd1 + # nandwrite /dev/mtd1 mainimage + +which configures the network interface with the IP address 192.168.1.203, +downloads the "mainimage" file from the TFTP server at 192.168.1.202, erases +the flash and then writes the new image to the flash. + +The main image can then be booted with: + + ARMmon > bootos "console=ttyS0,38400 root=/dev/mtdblock1 rootfstype=jffs2" + +Note that the initramfs image is built by poky in a slightly different mode to +normal since it uses uclibc. To generate this use a command like: + +IMAGE_FSTYPES=cpio.gz MACHINE=cm-x270 POKYLIBC=uclibc bitbake poky-image-minimal-mtdutils + + +Compulab EM-X270 (em-x270) +========================== + +FIXME + + +FreeScale iMX31ADS (mx31ads) +=========================== + +FIXME - needs testing + +It is assumed a serial connection to the board is available (115200 8N1), a +TFTP server is available at 192.168.9.1 and the board is to be given an IP +address of 192.168.9.2. To set the IP address, run: + + ip_address -l 192.168.9.2/24 -h 192.168.9.1 + +To download a kernel called "zimage" from the TFTP server, run: + + load -r -b 0x100000 zimage + +To write the kernel to flash run: + + fis create kernel + +To download a rootfs jffs2 image "rootfs" from the TFTP server, run: + + load -r -b 0x100000 rootfs + +To write the root filesystem to flash run: + + fis create root + +To load and boot a kernel and rootfs from flash: + + fis load kernel + exec -b 0x100000 -l 0x200000 -c "noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rootfstype=jffs2 init=linuxrc ip=none” + +To load and boot a kernel from a TFTP server with the rootfs over NFS: + + load -r -b 0x100000 zimage + exec -b 0x100000 -l 0x200000 -c "noinitrd console=ttymxc0,115200 root=/dev/nfs nfsroot=192.168.9.1:/mnt/nfsmx31 rw ip=192.168.9.2::192.168.9.1:255.255.255.0" + + +Marvell PXA3xx Zylonite (zylonite) +================================== + +These instructions assume the Zylonite is connected to a machine running a TFTP +server at address 192.168.123.5 and that a serial link (38400 8N1) is available +to access the blob bootloader. The kernel is on the TFTP server as +"zylonite-kernel" and the root filesystem jffs2 file is "zylonite-rootfs" and +the images are to be saved in NAND flash. + +The following commands setup blob: + + blob> setip client 192.168.123.4 + blob> setip server 192.168.123.5 + +To flash the kernel: + + blob> tftp zylonite-kernel + blob> nandwrite -j 0x80800000 0x60000 0x200000 + +To flash the rootfs: + + blob> tftp zylonite-rootfs + blob> nanderase -j 0x260000 0x5000000 + blob> nandwrite -j 0x80800000 0x260000 + +(where is the rootfs size which will be printed by the tftp step) + +To boot the board: + + blob> nkernel + blob> boot + + +Logic iMX31 Lite Kit (mx31lite) +=============================== + +FIXME + + +Phytec phyCORE-iMX31 (mx31phy) +============================== + +FIXME + + + Consumer Devices + ================ + +FIC Neo1973 GTA01 smartphone (fic-gta01) +======================================== + +To install Poky on a GTA01 smartphone you will need "dfu-util" tool +which you can build with bitbake dfu-util-native. + +Flashing requires these steps: + + 1. Power down the device. + 2. Connect the device to the host machine via USB. + 3. Hold AUX key and press Power key. There should be a bootmenu + on screen. + 4. Run "dfu-util -l" to check if the phone is visible on the USB bus. + The output should look like this: + + dfu-util - (C) 2007 by OpenMoko Inc. + This program is Free Software and has ABSOLUTELY NO WARRANTY + + Found Runtime: [0x1457:0x5119] devnum=19, cfg=0, intf=2, alt=0, name="USB Device Firmware Upgrade" + + 5. Flash the kernel with "dfu-util -a kernel -D uImage-2.6.21.6-moko11-r2-fic-gta01.bin" + 6. Flash rootfs with "dfu-util -a rootfs -D ", where is the + jffs2 image file to use as the root filesystem + (e.g. ./tmp/deploy/images/poky-image-sato-fic-gta01.jffs2) + + +HTC Universal (htcuniversal) +============================ + +FIXME + + + +Nokia 770/N800/N810 Internet Tablets (nokia770 and nokia800) +============================================================ + +Note: Nokia tablet support is highly experimental. + +The Nokia internet tablet devices are OMAP based tablet formfactor devices +with large screens (800x480), wifi and touchscreen. + +To flash images to these devices you need the "flasher" utility which can be +downloaded from the http://tablets-dev.nokia.com/d3.php?f=flasher-3.0. This +utility needs to be run as root and the usb filesystem needs to be mounted +although most distributions will have done this for you. Once you have this +follow these steps: + + 1. Power down the device. + 2. Connect the device to the host machine via USB + (connecting power to the device doesn't hurt either). + 3. Run "flasher -i" + 4. Power on the device. + 5. The program should give an indication it's found + a tablet device. If not, recheck the cables, make sure you're + root and usbfs/usbdevfs is mounted. + 6. Run "flasher -r -k -f", where is the + jffs2 image file to use as the root filesystem + (e.g. ./tmp/deploy/images/poky-image-sato-nokia800.jffs2) + and is the kernel to use + (e.g. ./tmp/deploy/images/zImage-nokia800.bin). + 7. Run "flasher -R" to reboot the device. + 8. The device should boot into Poky. + +The nokia800 images and kernel will run on both the N800 and N810. + + +Sharp Zaurus SL-C7x0 series (c7x0) +================================== + +The Sharp Zaurus c7x0 series (SL-C700, SL-C750, SL-C760, SL-C860, SL-7500) +are PXA255 based handheld PDAs with VGA screens. To install Poky images on +these devices follow these steps: + + 1. Obtain an SD/MMC or CF card with a vfat or ext2 filesystem. + 2. Copy a jffs2 image file (e.g. poky-image-sato-c7x0.jffs2) onto the + card as "initrd.bin": + + $ cp ./tmp/deploy/images/poky-image-sato-c7x0.jffs2 /path/to/my-cf-card/initrd.bin + + 3. Copy an Linux kernel file (zImage-c7x0.bin) onto the card as + "zImage.bin": + + $ cp ./tmp/deploy/images/zImage-c7x0.bin /path/to/my-cf-card/zImage.bin + + 4. Copy an updater script (updater.sh.c7x0) onto the card + as "updater.sh": + + $ cp ./tmp/deploy/images/updater.sh.c7x0 /path/to/my-cf-card/updater.sh + + 5. Power down the Zaurus. + 6. Hold "OK" key and power on the device. An update menu should appear + (in Japanese). + 7. Choose "Update" (item 4). + 8. The next screen will ask for the source, choose the appropriate + card (CF or SD). + 9. Make sure AC power is connected. + 10. The next screen asks for confirmation, choose "Yes" (the left button). + 11. The update process will start, flash the files on the card onto + the device and the device will then reboot into Poky. + + +Sharp Zaurus SL-C1000 (akita) +============================= + +The Sharp Zaurus SL-C1000 is a PXA270 based device otherwise similar to the +c7x0. To install Poky images on this device follow the instructions for +the c7x0 but replace "c7x0" with "akita" where appropriate. + + +Sharp Zaurus SL-C3x00 series (spitz) +==================================== + +The Sharp Zaurus SL-C3x00 devices are PXA270 based devices similar +to akita but with an internal microdrive. The installation procedure +assumes a standard microdrive based device where the root (first) +partition has been enlarged to fit the image (at least 100MB, +400MB for the SDK). + +The procedure is the same as for the c7x0 and akita models with the +following differences: + + 1. Instead of a jffs2 image you need to copy a compressed tarball of the + root fileystem (e.g. poky-image-sato-spitz.tar.gz) onto the + card as "hdimage1.tgz": + + $ cp ./tmp/deploy/images/poky-image-sato-spitz.tar.gz /path/to/my-cf-card/hdimage1.tgz + + 2. You additionally need to copy a special tar utility (gnu-tar) onto + the card as "gnu-tar": + + $ cp ./tmp/deploy/images/gnu-tar /path/to/my-cf-card/gnu-tar + + + -- cgit 1.2.3-korg