Age | Commit message (Collapse) | Author |
|
source for TEMPLATECONF
This sets the following order:
1. TEMPLATECONF set in the unix environment (for example as a
prefix to '. oe-init-build-env').
2. If empty then $BUILDDIR/conf/templateconf.cfg
3. If absent then $OEROOT/.templateconf (oe-init-build-env sets OEROOT
to where it is, which is poky or oe-core).
I believe this is more logical and consistent with common practice;
it also avoids situations where the user is stuck with cryptic
errors because templateconf.cfg contains something invalid and
that something cannot be overridden from command line.
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
set up
This was done before any of the sanity checks or actual setup, which
resulted in templateconf.cfg always getting written out, whether it
would be valid or not, and the user becoming stuck with it.
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is a leftover from one of the RFC iterations, where
the property contained available machines, distros and templates.
As all of those were dropped from the final version, there is no
reason to list the layers either anymore.
Normally this would be a backwards incompatible change, but as
the layer setup itself was just merged, I think we can do a quick
fixup :-)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
template locations
This is done only for default oe-core/poky templates; for anything
else the locations themselves need to be migrated first, and there
is no way to tell where they would be.
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
from a json file
This script can be used directly from poky or oe-core, or can be copied directly
into alayer or any other repository - it is self-suffucient and requires only python3
and git on the host where it will run. It is also copied by the bitbake-layers
layers-setup plugin together with the json, unless requested otherwise.
1. How to restore the layers from the saved configuration:
a) Clone the bootstrap layer or some other repository to obtain the json config and the setup script that can use it.
(use 'bitbake-layers create-layer-setup' from the previous commit to create them)
b) Running with default options:
(note: this will work to update an existing checkout as well)
alex@Zen2:/srv/work/alex/my-build$ meta-alex/setup-layers
Note: not checking out source meta-alex, use --force-bootstraplayer-checkout to override.
Setting up source meta-intel, revision 15.0-hardknott-3.3-310-g0a96edae, branch master
Running 'git init -q /srv/work/alex/my-build/meta-intel'
Running 'git remote remove origin > /dev/null 2>&1; git remote add origin git://git.yoctoproject.org/meta-intel' in /srv/work/alex/my-build/meta-intel
Running 'git fetch -q origin || true' in /srv/work/alex/my-build/meta-intel
Running 'git checkout -q 0a96edae609a3f48befac36af82cf1eed6786b4a' in /srv/work/alex/my-build/meta-intel
Setting up source poky, revision 4.1_M1-372-g55483d28f2, branch akanavin/setup-layers
Running 'git init -q /srv/work/alex/my-build/poky'
Running 'git remote remove origin > /dev/null 2>&1; git remote add origin git://git.yoctoproject.org/poky' in /srv/work/alex/my-build/poky
Running 'git fetch -q origin || true' in /srv/work/alex/my-build/poky
Running 'git remote remove poky-contrib > /dev/null 2>&1; git remote add poky-contrib ssh://git@push.yoctoproject.org/poky-contrib' in /srv/work/alex/my-build/poky
Running 'git fetch -q poky-contrib || true' in /srv/work/alex/my-build/poky
Running 'git checkout -q 11db0390b02acac1324e0f827beb0e2e3d0d1d63' in /srv/work/alex/my-build/poky
2. Command line options:
alex@Zen2:/srv/work/alex/my-build$ meta-alex/setup-layers -h
usage: setup-layers [-h] [--force-bootstraplayer-checkout] [--destdir DESTDIR] [--jsondata JSONDATA]
A self contained python script that fetches all the needed layers and sets them to correct revisions
optional arguments:
-h, --help show this help message and exit
--force-bootstraplayer-checkout
Force the checkout of the layer containing this file (by default it is presumed that as this script is in it, the layer is already in place).
--destdir DESTDIR Where to check out the layers (default is /srv/work/alex/my-build).
--jsondata JSONDATA File containing the layer data in json format (default is /srv/work/alex/my-build/meta-alex/setup-layers.json).
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
specifically that ../../layer.conf exists, and that second-from-last
component in the path is 'templates'.
This requires tweaking template.conf creation in eSDK bbclass, as
we need to ensure that the path in it is valid, and exists
(which may not be the case if the SDK is poky-based).
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This sets the ground for standardizing (and enforcing) the location of
configuration templates: let's start with the default one.
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These are typically auto-extracted with modify/upgrade from recipes
and can be easily recreated. On the rare occasions where they need
to be reused, they are still available under workspace/attic (which
is already used for old recipes and appends), so nothing gets lost.
This avoids the annoyance of devtool refusing to proceed because
there is a previous source tree in workspace/sources.
For independent source trees behave as before: do nothing.
Adjust the test that previously deleted those trees by hand.
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It's not possible to set the label (of gpt entry) normally
when I want to use non-listed fstype as a rawcopy.
Example)
part ? --source rawcopy --ondisk mmcblk0 --label mypart --sourceparams file=mypart.raw
To resolve this problem, this patch addes a 'none' fstype
and ignore do_image_label on rawcopy (that actually set the partition label.)
Signed-off-by: JeongBong Seo <jb.seo@lge.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Where there isn't a copyright statement, add one to make it explicit.
Also drop editor config lines where they were present and add license
identifiers as MIT if there isn't one.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If there is insufficent space to change the interpreter, we were
printing an error here but the overall script did not return an error
code, and thus the SDK installation appeared to succeed - but some of
the binaries will not be in a working state. Allow the relocation to
proceed (so we still get a full list of the failures) but error out at
the end so that the installation is halted.
Signed-off-by: Paul Eggleton <paul.eggleton@microsoft.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* easier to find than searching for the highest value in the graph, when the graph is really wide
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
scripts/pybootchartgui/pybootchartgui/draw.py:820: SyntaxWarning: "is not" with a literal. Did you mean "!="?
if (OPTIONS.show_pid or OPTIONS.show_all) and ipid is not 0:
scripts/pybootchartgui/pybootchartgui/draw.py:918: SyntaxWarning: "is not" with a literal. Did you mean "!="?
if i is not 0:
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
* memory pressure is already collected in buildstats, render it as well
when available
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
Otherwise, workspace cleanup (removing bogus recipe and source tree)
will not happen, leaving breakage behind.
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
There is a coding error in the second invocation of _upgrade_error:
rf is passed into it before it is initialized in the try: block. And so
bogus recipes are left behind in the workspace, causing breakage.
Instead, rewrite the functions to take the recipe directory name in the
workspace layer, which can be calculated in advance.
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
For device tree using systems, add support to set a custom devices tree
during UEFI boot. This requires to copy the DTB file to the boot
partition and to add the respective loader entries to the configuration
files.
Both grub and systemd-boot support only loading a specific device tree.
Therefore refuse to work if the 'dtb' parameter contains more than one
entry.
Out of scope for now are overlays (only supported by systemd-boot).
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
[Luca: rebased on commit 98e9d435b278 ("wic/bootimg-efi: use cross objcopy when building unified kernel image")]
|
|
The paths for configuring grub and systemd-boot have some common bits
around copying the initrd files. This will even grow when adding dtb
support. Factor this out into a class function.
Along this, avoid evaluating 'create-unified-kernel-image' multiple
times in do_configure_systemdboot and suppress a bogus warning about
"Ignoring missing initrd" when it is turned on.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
"with some default values" isn't clear; if the user wants to change or
inspect the default values and their history, we should help them find
where they are. This becomes especially important when using template
configs other than poky's.
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
We can't rely on the host objcopy knowing how to process target binaries,
so use the cross objcopy in the sysroot instead.
Also construct the command argument-by-argument as the format expression
was getting unwieldy.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
We might want to run a cross tool, such as objcopy, in wic. These are
in a TARGET_SYS/ subdirectory under /usr/bin, so add that directory to
the search path too.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
Signed-off-by: Mark Hatle <mark.hatle@kernel.crashing.org>
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When the workspace bbappends are still using the old override syntax
with EXTERNALSRC_pn-*, externalsrc_re will not match, and pn will never
be assigned, leading to a nondescript UnboundLocalError being raised on
the user's terminal. Try to detect that situation and give the user a
hint how to solve it.
Signed-off-by: Roland Hieber <rhi@pengutronix.de>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix "NameError: name 'orig_path' is not defined".
It's a typo from when this error was handled outside this function.
Signed-off-by: Mihai Lindner <mihai.lindner@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If devtool finish needs to create a patch and have it applied to the
sources for a recipe where S points to a subdirectory of the sources,
then the patch needs to be applied at the root of the repo i.e. we need
to add a patchdir= parameter to the SRC_URI entry.
Signed-off-by: Paul Eggleton <paul.eggleton@microsoft.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If (perhaps foolishly) at your configuration level you have e.g.
SRC_URI_append_pn-recipename = " file://patchname.patch"
and then run devtool modify on a different recipe, an error occurs:
INFO: SRC_URI contains some conditional appends/prepends - will create branches to represent these
...
ERROR: [Errno 2] No such file or directory: '/path/to/downloads/patchname.patch'
pn- overrides would not constitute an alternative configuration that we
should handle in this context, so just ignore them to avoid the issue.
Signed-off-by: Paul Eggleton <paul.eggleton@microsoft.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Marius Kriegerowski <marius.kriegerowski@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Substitute expressions or whitespace from python egg requires.txt when
generating PACKAGECONFIG
Pysetuptools sees the uvicorn.egg-info/requires.txt as extra requirements.
Recipetool parses this information to generate the PACKAGECONFIG.
These extra requirements contain expressions and whitespace, which are not allowed in PACKGAGECONFIG.
This patch substitute them by hyphens to make PACKAGECONFIG parsable and readable.
Also adding an oe-selftest for this.
[YOCTO #14446]
Signed-off-by: Thomas Roos <throos@amazon.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add two new, separate charts showing the avg10 and delta
total pressure over time for the CPU and IO resources. The height of
the avg10 data in each chart represents the percentage of time "some"
task was delayed over the specific resource during the last 10
seconds of the build. The height of the delta total data in each chart
represents the total time "some" task was delayed since the last sample
was collected. If the reduced_proc_pressure data is not present in the
buildstats log, then the new charts are not shown at all rather than
being present but unpopulated.
Note that the delta total graphs may appear "spikey",
oscillating from high values to low. This behaviour is fixed in a
subsequent commit.
Signed-off-by: Aryaman Gupta <aryaman.gupta@windriver.com>
Signed-off-by: Randy MacLeod <randy.macleod@windriver.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* add missing % to print the values instead of:
| INFO: Build artifacts not found, exiting.
| INFO: (Please check that the build artifacts for the machine
| INFO: selected in local.conf actually exist and that they
| INFO: are the correct artifacts for the image (.wks file)).
|
| ERROR: ("The artifact that couldn't be found was %s:\n %s", 'kernel-dir', '/OE/build/deploy/images/qemux86-64')
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
runqemu auto generating the KERNEL_CMDLINE values and specifying using
-append option to qemu boot command which will lead to override the
kernel_cmdline/bootargs which are specified in DTB when using -dtb option.
Add new macro QB_KERNEL_CMDLINE to specify not to add the runqemu
generated KERNEL_CMDLINE values instead use which are in the DTB if
value defined as 'none'.
Add provision to override bootargs using # runqemu bootparams="root=/dev/ram0"
Signed-off-by: Raju Kumar Pothuraju <raju.kumar-pothuraju@xilinx.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
when devtool finish, the _copy_file() failed.
--------------------------------------------
TypeError: _copy_file() got an unexpected keyword argument
'base_outdir'
--------------------------------------------
Fixes: 05f2d5d2ce00 ("devtool: finish: add dry-run option")
Signed-off-by: Xiaobing Luo <luoxiaobing0926@gmail.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allow wic to also manipulate the rootfs entry in fstab, which it
currently refuses to write. Reasons one might want to do that include
using systemd-growfs via --fsoptions on /
With this change / is now handled exactly the same as other
mountpoints, the former exception seemingly was not even documented.
Signed-off-by: Tobias Schmidl <tobiasschmidl@siemens.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The .dot file created by `bitbake -g` changed formats a while ago, which
broke oe-depends-dot.
Also add some useful examples to the --help output.
Signed-off-by: Rusty Howell <rustyhowell@gmail.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Sort dict keys in the json output and use tab spacing. This means
when commited into git, the diffs are human readable but it is more
compact filesize than space indentation.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Save commit data when writing to the json file so the results can
be copared/extended later.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The `fspassno` parameter allows to overwrite the value of the last
column (`fs_passno`) in the /etc/fstab of the target root file system.
This allows to have periodic file system checks.
Signed-off-by: Claudius Heine <ch@denx.de>
Signed-off-by: Vijai Kumar K <Vijaikumar_Kanagarajan@mentor.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix a minor typo and replace "partion" with "partition".
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Check that open file and user process limits are greater than or equal to what
the autobuilder uses.
Signed-off-by: Michael Halstead <mhalstead@linuxfoundation.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use files from the current release to avoid the depreciated -show-cursor
option.
Signed-off-by: Michael Halstead <mhalstead@linuxfoundation.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
partitions
This patches makes locating the file database containing the file and
folder usernames and permissions more reliable.
In addition to locating it relative to the partition directory, we also
try to locate it relative to the IMAGE_ROOTFS.
Prior to this patch, the database was not found when using
--rootfs-dir=${IMAGE_ROOTFS}/<x> in the WIC script, leading to erronous file
permissions and ownership.
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is horrible but I'm running out of better ideas. We hit circular reference
issues which we were trying to avoid in the core HOSTTOOLS code. When building
the eSDK, there can be two copies of the script.
Therefore assume git will never be in a directory called scripts. This
fixes eSDK build failures.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The previous minimially invasive git intercept simply isn't enough. For example,
meson used in the igt-gpu-tools recipe hardcodes the path to git in the configure
step so at install time, changing PATH has no effect.
There are lots of interesting things we could do to try and avoid problems but
making the git intercept and dropping fakeroot privs for git global is probably
the least worst solution at this point. It will add slight overhead to git calls
but we don't make many so the overall impact is likely minimal.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
phantomjs and optipng
Use of those tools was removed in b5c131006e3fad0a15e6cdf81f71dc1e96647028
perf-build-test/report: Drop phantomjs and html email reports support
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In order to build erofs filesystems, wic must have the erofs-utils
package installed into its sysroot.
Fixes: 30375ce97 ("Add support for erofs filesystems")
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When using "msdos" partition tables and "--label" but not "--use-uuid"
one can generate images which will not find their root, because
PARTLABEL does not work for "msdos".
Fix that by simply not going the PARTLABEL path in case of "msdos".
Fixes: 2fb247c5ecf0 ("wic: support rootdev identified by partition label")
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In a devshell, recent versions of git will complain if the repo is owned
by someone other than the current UID - consider this example:
------
bitbake -c devshell linux-yocto
[...]
kernel-source#git branch
fatal: unsafe repository ('/home/paul/poky/build-qemuarm64/tmp/work-shared/qemuarm64/kernel-source' is owned by someone else)
To add an exception for this directory, call:
git config --global --add safe.directory /home/paul/poky/build-qemuarm64/tmp/work-shared/qemuarm64/kernel-source
kernel-source#
------
Of course the devshell has UID zero and the "real" UID is for "paul" in
this case. And so recent git versions complain.
As the whole purpose of the devshell is to invoke a shell where development
can take place, having a non-functional git is clearly unacceptable.
Richard suggested we could use PSEUDO_UNLOAD=1 to evade this issue, and I
suggested we probably will see other similar instances like this and should
make use of PATH to intercept via devshell wrappers - conveniently we already
have examples of this.
Here, we copy the existing "ar" example and tune it to the needs of git to
combine Richard's suggestion and mine.
As such we now also can store commit logs and use send-email with our user
specific settings, instead of "root", so in additon to fixing basic
commands like "git branch" it should also increase general usefulness.
RP: Tweaked the patch so the PATH change only applies to the devshell task
and is a generic git intercept rather than devshell specific.
RP: Also apply the PATH change to do_install tasks since that also runs under
fakeroot and several software projects inject "git describe" output into
their binaries (systemd, iputils, llvm, ipt-gpu-tools at least) causing
reproducibility issues from systems with different git versions.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It duplicates udevadm in systemd recipe to make it could run
update_udev_hwdb with multilib enabled. Since systemd last update,
it deploys a shared library libsystemd-shared-250.so in /lib/systemd/.
The library will be overwritten when multilib enabled. Then if both
udev-hwdb and lib32-udev-hwdb are installed, it fails to run the
multilib version postinstall intercept update_udev_hwdb:
| /path/to/build/tmp-glibc/work/intel_x86_64-wrs-linux/wrlinux-image-small/1.0-r1/rootfs/usr/libexec/lib32-udevadm:
error while loading shared libraries: libsystemd-shared-250.so: wrong ELF class: ELFCLASS64
`udevadm hwdb --update` just concatenates .hwdb files in dirs
/etc/udev/hwdb.d and /lib/udev/hwdb.d. The output file hwdb.bin is
identical with the one created by lib32-udevadm. So do NOT duplicate
lib32-udevadm in systemd and eudev. And update intercept script
update_udev_hwdb that re-run udevadm with same arch qemuwrapper if run
${binprefix}qemuwrapper failed.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|