| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
on more than one branch
If a revision is in more than one branch, the check_rev_branch() function can't
cope with it and the tool returns incorrect errror messages. This patch
ensures it copes with this situation.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If both branch and last_revision are specified for a component when
combo-layer init is run, ensure that the specified revision is actually
on the specified branch and error out if not. Also ensure that the error
message mentions the component.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
If last_revision is specified for a component when running combo-layer
init, then use that revision instead of the latest revision on the
branch. Also, remove unnecessary git checkout during init since we
specify the revision to all calls to git when dealing with the component
repositories.
Fixes [YOCTO #3040].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Handle the case during update where the configured branch is not
currently checked out in the component repository by just specifying
it in the places where it was not previously.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
If the local configuration is already split out, ensure the init action
works properly and does not error in the case that last_revision is not
set. Additionally, if the local configuration is within the repository,
prevent it from being committed and add it to .gitignore.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allow splitting the local parts of the configuration (mostly
local_repo_dir and last_revision, although there is no limitation) to
a side-by-side -local.conf file, with component sections optionally
tagged with the combo layer branch name. This effectively allows you to:
* avoid polluting the history by committing the updated last revision
to the combo repository for every update
* avoid putting local repo paths into the combo repository
* manage multiple branches of the combo repository whilst avoiding the
possibility of mixing the configuration for one branch with another.
An example split configuration (note, values may be artificial):
------------------- combo-layer.conf -------------------
[bitbake]
src_uri = git://git.openembedded.org/bitbake
dest_dir = bitbake
hook = scripts/combo-layer-hook-default.sh
[oe-core]
src_uri = git://git.openembedded.org/openembedded-core
dest_dir = .
hook = scripts/combo-layer-hook-default.sh
--------------------------------------------------------
---------------- combo-layer-local.conf ----------------
[bitbake]
local_repo_dir = ../repos/bitbake
[oe-core]
local_repo_dir = ../repos/oe-core
[bitbake|master]
branch = master
last_revision = db689a99beffea1a285cdfc74a58fe73f1666987
[oe-core|master]
branch = master
last_revision = 121a1499a81706366acc0081272a6bff634d4d62
[bitbake|denzil]
branch = 1.12
last_revision = 24b631acdaa143a4de39c6e1328849660c66f219
[oe-core|denzil]
branch = denzil
last_revision = 741146fa90f28f7ce8d82ee7f7e254872d519724
--------------------------------------------------------
It is assumed that the local config file will be added to .gitignore.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the user edits the configuration file by hand and sets last_revision,
we need to ensure that the revision is valid and on the specified
branch.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Ignore blank lines in patch list
* Don't fail in interactive mode if patch list is deleted
* Show patch counter
* Show relative path for patches
* Print headings before applying patch list for each component
Also change to using a "with" block to read the patch list so it gets
closed properly when we're finished.
Fixes [YOCTO #2455].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If applying a patch fails during the update process, drop to a shell
instead of exiting; at that point the user can manually apply the patch,
do nothing and "exit" to skip it, or "exit 1" to abort the process.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make the dirty repo check somewhat less strict by ignoring old
patch directories created by this tool.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Add a -n option to disable component repo pull during update
* Add a 'pull' action to pull the component repos only
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
&> does not work with dash - use > xxxx 2>&1 instead.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A few recent commits in the OE-Core repository contain diffs in their
commit messages, which totally confuses git-am when applying them to the
combo repository during update. Add some code to detect and indent any
diff text in the commit message so that this does not happen (and show a
warning).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If one or more components are specified for update, only check if their
repository/repositories are dirty rather than checking all of the
configured repositories.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If you specify one or more components to update immediately following
the "update" command, only these components will be updated as opposed
to the default behaviour of updating all of them.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If we are running an update and the last revision hasn't changed since
the last update, don't write to the configuration file. This avoids
committing the config file with no changes other than spontaneous
reordering of sections, which sometimes occurs due to the behaviour of
the internal dictionary in Python's ConfigParser class. (This can be
fixed properly but the fix is only easy in Python 2.7+ due to the
availability there of the collections.OrderedDict class, and we
currently want to be compatible with 2.6.x as well.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Avoid displaying the error from the "git status" command we use to check
the status of the config file if the config file is outside of the
repository (a situation that is already handled).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If a commit is empty (for example, commits brought over from svn where
only properties were changed) then attempting to apply it with "git am"
will result in the error "Patch format detection failed", so skip it
instead.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Fix some grammar.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
If the config file is tracked within the combo-layer repository and it
is updated at the end of the "update" operation (because last_revision
has been changed), then automatically commit the file. This ensures that
multiple people can perform updates on different machines without the
last revision information going missing.
(If the file is outside the repository or is masked via .gitignore, this
will do nothing.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Fix the dirty repository check to detect any changes, including
untracked files and uncommitted changes in the index.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Add an optional per-component branch setting to allow specifying the
branch instead of always using master.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Move all example configuration to the example config file, tidy up a few
long lines and fix some grammar.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
The "init" subcommand will now copy the current state of each component
repository into the combo layer repository, set last_revision for each
component, and then use "git add" to set up the initial commit (but will
not actually make the initial commit - that is left up to the user).
Also take the opportunity to bump the version number.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
The combo-layer tool had trouble handling merge commits as they were
included in the revision list but not the patches; these are now
excluded from the revision list. Note however that this will not handle
merge commits that resolved a conflict; since "git format-patch" cannot
construct a linear change history over such merges there is nothing we
can currently do with these.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This small patch introduces a a very simple and basic way to script
the combo-layer conf file. With that a combo can be shared with no
need to change its config - associated to the use of environment
variables for example.
*Similar* to bitbake it considers every value starting with @ to be
a python script. So local_repo could be easily configured as:
[bitbake]
local_repo = @os.getenv("LOCAL_REPO_DIR") + "/bitbake"
or any more sophisticated python syntax.
This version updates the config file description so users can be
aware of.
Signed-off-by: Leandro Dorileo <ldorileo@gmail.com>
|
|
Use --keep-cr option to "git am" or otherwise we lose carriage returns
which can be important for patches against files that use CRs.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
This patch adds the script "combo-layer" to manipulate combo layer
repos. A combo layer repo is a repo containing multiple component
repos, e.g. oe-core, bitbake, BSP repos. The combo layer repo needs to
be updated by syncing with the component repo upstream. This script
is written to assist the combo layer handling.
The combo layer tool provides three functionalities:
- init: when the combo layer repo and component repo does not exist,
init will "git init" the combo layer repo, and also "git clone" the
component repos
- update: combo layer tool will pull the latest commit from component
repo upstream, and apply the commits since last update commit to the
combo repo. If the user specifies interactive mode(--interactive),
they can edit the patch list to select which commits to apply.
- splitpatch: split the combo repo commit into separate patches per
component repo, to facilitate upstream submission.
Combo layer tool uses a config file to define the component repo info.
Please check the combo-layer.conf.example for a detailed explanation
of the config file fields.
Signed-off-by: Yu Ke <ke.yu@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
Saul Wold
Richard Purdie
Paul Eggleton
Otavio Salvador
Leandro Dorileo
Yu Ke