| Age | Commit message (Collapse) | Author |
|---|
|
This class is to be used by recipes that need to set up specific
user/group accounts and set custom file/directory permissions.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
|
|
Add generic machine config file
uClibc.machine in topdir should work mostly
and odd ones like mips should have a copy
of their own as explained
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The internal use of PSEUDO_PASSWD adds the /etc path
automatically.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch adds the firmware files for:
* rt8192cu
* rt8192ce
* rt8192su
[RP: Changed file modes to 0644]
Signed-off-by: Michael Lippautz <michael.lippautz@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
newer udev uses sgnalfd + epoll and this exposed a bug
in uclibc for mips where SFD_NONBLOCK should be defined
with 0200 for mips but was using 04000. This would cause
random segfaults in udev during boot process
Tested on qemumips/angstrom console-image since angstrom
uses udev 171. It worked well when we did not use meta-oe
layer because udev in oe-core will then be used which is
at version 164.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a new function that is responsible for fixing directory and file
permissions, owners and groups during the packaging process. This will fix
various issues where two packages may create the same directory and end up
with different permissions, owner and/or group.
The issue being resolved is that if two packages conflict in their ownership
of a directory, the first installed into the rootfs sets the permissions.
This leads to a least potentially non-deterministic filesystems, at worst
security defects.
The user can specify their own settings via the configuration files
specified in FILESYSTEM_PERMS_TABLES. If this is not defined, it will
fall back to loading files/fs-perms.txt from BBPATH. The format of this
file is documented within the file.
By default all of the system directories, specified in bitbake.conf, will
be fixed to be 0755, root, root.
The fs-perms.txt contains a few default entries to correct documentation,
locale, headers and debug sources. It was discovered these are often
incorrect due to being directly copied from the build user environment.
The entries needed to match the base-files package have also been added.
Also tweak a couple of warnings to provide more diagnostic information.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
But ensure that gcc-cross-intermediate always uses ld.bfd since
(e)glibc won't build with gold.
Signed-off-by: Phil Blundell <philb@gnu.org>
|
|
Remove unused uClibc.distro from topdir. It just creates
confusion
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
ARCH_{BIG|LITTLE}_ENDIAN is governed by ARCH_WANTS_{LITTLE|BIG}_ENDIAN
therefore we tame the superior
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Without this even arm-*-* was being treated as big endian
but normal convention is the arm-*-* is little endian
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Big endian counterparts are not needed since
we already add the proper endianness to final
config as seen in uclibc-config.inc
The difference between arm and armv5te configs
were also superficial since all it did was select
arm926t which made sure that right mtune and march
flags were passed to gcc when building uclibc
We already do that via passing them in
UCLIBC_EXTRA_CFLAGS.
Similarly for other architectures the features
are really taken care of in config mangler and
machine config fragments are no longer needed
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Pseudo was recently changed so that when system() calls are
made after a chroot(), the host binaries can no longer be found,
breaking the system("mkdir -p") approach when useradd creates
home directories.
Instead, use mkdir(2) to create home directories with a helper
function to ensure parent directories get created.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
|
|
correct libtool 2.4
Signed-off-by: Jessica Zhang <jessica.zhang@intel.com>
|
|
Polkit support is actually needed for consolekit to function properly, without you get things like:
** (gnome-panel:547): WARNING **: Could not ask session manager if shut down is available: Timeout was reached
Various applications will timeout and less well written ones will crash (e.g. the clock applet).
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
|
|
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
|
|
Somewhere in the past webkit changed from webkit-x to webkitgtk-x but the person updating the recipe didn't catch that
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
|
|
The tmpdir patch has been regenerated and can now be applied with git-am, no functional changes.
The biggest improvement is that dbus will log to syslog nowadays:
[ 22.238708] <29>dbus[237]: [system] Activating service name='fi.w1.wpa_supplicant1' (using servicehelper)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
|
|
The 2.6.37.2 version is kept to allow the qemu kernels and libc headers version to match
|
|
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
|
|
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
|
|
Set 'CCACHE_DIR' in 'bitbake.conf' and create the dirs for every
package before task 'do_configure' started.
[RP: Merge dirs variables into one]
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add ccache as a native tool and put its recipe files to:
'meta/recipes-devtools/ccache'.
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
|
|
Bitbake now allows the umask to be specified per task. The
following tasks will have a umask of 022 set by default:
do_configure
do_compile
do_install
do_package
do_populate_sysroot
do_rootfs
do_configure and do_compile need a umask of 022 set because -many- recipes
directly copy generated files out of recipe's build directory. Instead of
fixing each existing and future recipe, it was shown to be much easier to
just set the umask.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
The firmware was installed 0666 which could have been a security
issue.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
|
|
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
|
|
Avoid fractions like 80.72 and round them to whole numbers.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
|
|
By passing the data object to the less frequently run test harnesses
(check_sanity_tmpdir_change(), check_sanity_sstate_dir_change() and
check_sanity_version_change()) we can run tests against BitBake data here
too.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
|
|
reassign Qing's recipe to other team member
Signed-off-by: Yu Ke <ke.yu@intel.com>
|
|
Added these patches to the recipe to get it to work as desired:
Upstream patches from tmp & for-dragonn branches of repository http://git.kernel.org/?p=linux/kernel/git/mason/btrfs-progs-unstable.git
Also included the debian patches.
Nitin's patch to make the makefile cross friendly
And Xin Zhong's patch to improve mkfs.btrfs
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
|
|
Fixes [YOCTO 1136]
linux-yocto adds some configure steps that are necessary to prepare the source
tree after the do_patch task. This causes a "-c menuconfig" to fail in a clean
build tree. Typical use of menuconfig should be to modify the config provided
by the recipe being built. It therefor makes sense for the menuconfig task to
come after the configure task. This also happens to fix the issue seen with the
linux-yocto kernel recipe.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
* Fix configure and Makefile to read the defaults.h and t-oe from ${B},
so that the ${S} can be shared.
* Change ${S} to the shared source directory.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
Fix configure and Makefile to read the defaults.h and t-oe from ${B},
so that the ${S} can be shared.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
This patched is derived from Richard, make gcc use the shared source
directory during the different building:
1) Make gcc-cross, gcc-cross-initial, gcc-cross-intermediate and
gcc-runtime share the same source directory.
2) The source directory is ${TMPDIR}/work-shared/gcc-${PV}, for example:
tmp/work-shared/gcc-4.5.1
3) Fix do_clean to clean the shared source directory and stamps
4) gcc uses sed and creates config files against ${S} which means the
directory should not be shared. Change the way to make it work:
* The configure option --with-headers=${STAGING_DIR_TARGET}${SYSTEMHEADERS}
can replace the sed command, see the code in configure:
if test "x$with_headers" != x; then
glibc_header_dir=$with_headers
This has the same effect as the sed command:
sed -i 's:^\([ ]*\)glibc_header_dir=\"${with_build_sysroot}/usr/include\": ...
so add the --with-headers=${STAGING_DIR_TARGET}${SYSTEMHEADERS} to
gcc-configure-cross.inc( not add to gcc-configure-common.inc, since
not all the gcc building need this, the one which has its own do_configure
doesn't need it).
* Move t-oe from ${T} to ${B}/gcc, so that the patched Makefile.in
can read it easily, please see the commit for gcc-4.5.1 and
gcc-4.6.0.
* Use the defaults.h in ${B}/gcc instead of ${S}/gcc, and the patched
configure.ac(configure) can read it correctly, please see the
commit for gcc-4.5.1 and gcc-4.6.0.
* The gcc-crosssdk.inc used sed to edit ${S}/config/*/linux*.h
to change the GLIBC_DYNAMIC_LINKER, which made the source
incompatible. To make the source compatible:
- Use:
sed -i ${S}/gcc/config/*/linux*.h -e \
's#\(GLIBC_DYNAMIC_LINKER[^ ]*\)\( *"/lib.*\)#\1 SYSTEMLIBS_DIR\2#'
so entries in the files that look like:
#define GLIBC_DYNAMIC_LINKER64 "/lib64/ld-linux-x86-64.so.2"
would become
#define GLIBC_DYNAMIC_LINKER64 SYSTEMLIBS_DIR"/ld-linux-x86-64.so.2"
and we define SYSTEMLIBS_DIR in defaults.h.
NOTE:
#define GLIBC_DYNAMIC_LINKER64 (SYSTEMLIBS_DIR "/ld-linux-x86-64.so.2")
doesn't work in in the following define:
#define LINUX_DYNAMIC_LINKER \
CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER, UCLIBC_DYNAMIC_LINKER)
so use
#define GLIBC_DYNAMIC_LINKER64 SYSTEMLIBS_DIR"/ld-linux-x86-64.so.2"
5) Add do_configure_prepend to gcc-configure-common.inc and remove the
one in gcc-crosssdk.inc, this makes it easy to share the source,
otherwise we need do extra changes in gcc-configure-sdk.inc.
6) Use "cat > file <_EOF" to replace the "echo > file"
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Commit 477ede7472db0bacd5daacb96e97f849d1be84ee accidentally reverted
some code changes it shouldn't have done leading to continued eglibc
packaging issues. This patch corrects that damage.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
tcf-agent
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
|
|
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
|
|
This is used to work around a gcc-4.6's bug about the option.
[YOCTO #1099]
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
|
|
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
|
|
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
|
|
Move udev script to execute ealier since module autoload needs it to
create device nodes.
Also move sysfs before udev which has dependency on it.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
|
|
Apply 3g.patch which add cellular config option in connman-gnome.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
|
|
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
|
|
Remove the 0.6.10 version since now 0.7.3 is the latest stable version.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
|
|
Enable ofono plugin.
Adopt some logic in meta-oe on connman plugin runtime dependency.
Remove the fix-shutdown-ap-disconnect.patch since the original logic no longer exists.
Add Upstream-Status information for patches.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
|
Scott Garman
Khem Raj
Michael Lippautz
Mark Hatle
Phil Blundell
Jessica Zhang
Koen Kooi
Wenzong Fan
Nitin A Kamble
Joshua Lock
Yu Ke
Darren Hart
Saul Wold
Robert Yang
Richard Purdie
Dexuan Cui
Dongxiao Xu