| Age | Commit message (Collapse) | Author |
|---|
|
[YOCTO #6309]
It appears a logic issue has caused rpm -V to no longer
verify the files on the filesystem match what was installed.
(From OE-Core master rev: 117862cd0eebf6887c2ea6cc353432caee2653aa)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
While ELF_C_RDWR_MMAP was used, elf_begin invoked mmap() to map file
into memory. While the file's bss Offset has a large number, elf_update
caculated file size by __elf64_updatenull_wrlock and the size was
enlarged.
In this situation, elf_update invoked ftruncate to enlarge the file,
and memory size (elf->maximum_size) also was incorrectly updated.
There was segment fault in elf_end which invoked munmap with the
length is the enlarged file size, not the mmap's length.
Before the above operations, invoke elf_begin/elf_update/elf_end
with ELF_C_RDWR and ELF_F_LAYOUT set to enlarge the above file, it
could make sure the file is safe for the following elf operations.
[YOCTO #5356]
https://bugzilla.redhat.com/show_bug.cgi?id=1019707
https://bugzilla.redhat.com/show_bug.cgi?id=1020842
(From OE-Core master rev: 35c8b1ac7c3b1e4209b1e30d1dbd1a457286b97b)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
Fix typo, change PACAKGECONFIG to PACKAGECONFIG.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some LSB packages appear to have the platform set to '%{_target_platform}'
which is not a valid platform field. This causes a failure of the type:
warning: package lsb-test-core-4.1.15-1.x86_64 is intended for a %{_target_platform} platform
When we detect an invalid platform, fall back and try to construct a new
platform name that may be valid based on the arch and os contents of the
package. (This should only ever be needed by invalid or older RPM packages.)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This should fix sstate relocation issues with debugedit failing during
do_package on the Yocto Project autobuilder.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
run-postinsts is generic and will handle rpm delayed postinsts just
fine. No need to use another recipe.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The argument parser in RPM was patched to look for <binary>.real, but since the
wrapper now fakes the right argv[0] rpm wasn't able to parse any options.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
They differ at times because one is set from the db_cv_path_mkdir and the other is
found during config time for the host (/usr/bin/mkdir), in the macros we should just
use __mkdir for the __mkdir_p variant.
[YOCTO #4452]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Don't add the first line of /etc/rpm/platform to the list of patterns
to match when computing an arch score, use it just for getting
information about the platform (cpu/vendor/os).
[YOCTO #3864]
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The rpm-postinsts runtime dependency was overwritten.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch allows for the run-postinsts script to be provided outside
of the rpm package itself and not pull in all the associated build
dependencies.
[YOCTO 4175]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
If package-management isn't in IMAGE_FEATURES, the postinstall handler
wasn't being installed. rpm needs to depend on this to ensure it does
get installed.
[YOCTO #4160]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
1. Split out run-postinsts script into separated package, sometimes only the
postinsts script is required to run all postinsts scripts in /etc/rpm-postinsts/
instead of the whole rpm package.
2. Set ROOTFS_PKGMANAGE_BOOTSTRAP to rpm-postinsts
Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[ YOCTO #4089 ]
On PPC and MIPS, there appears to be a condition that causes
debugedit to segfault. The segfault is related to a call into
the md5hash algorithm, an address of '0', and a size > 0 is passed
causing the access of the address to segv.
This workaround may prove to be the final fix, but it's currently
unclear what the actual cause of the 0 address is.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We need to run autogen.sh in the correct directory (${S}).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix out of tree builds by removing assumptions about cwd and using
full paths to files in ${S}.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When image feature "debug-tweaks" is enabled, save output of post
install script to log file which can be configured when image first
boot.
[YOCTO #3223]
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Move run-postinsts scripts from rootfs_rpm.bbclass to rpm recipe. That
is the same way for dpkg and opkg to deal the post install scripts.
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Since /var/cache is not in volatiles anymore, this entry has to go.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We don't want the perl module dependencies being added to each package
by rpmdeps because it causes too many problems when the modules aren't
available at install time (since they get added in do_package which is
too late for the build system to ensure they are available), and it
appears that the perl dependency gathering isn't working reliably in any
case judging by how they are detected on some build hosts and not
others.
This was being disabled previously but it seems like the macros moved
to a different file at some point and nobody noticed; thus make sure we
disable the macros in all RPM macro files.
Should fix [YOCTO #3699].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix the following warning:
WARNING: QA Issue: rpm: Files/directories were installed but not shipped
/usr/lib64/rpm/bin/api-sanity-checker.pl
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This is needed so rpm compiles with the latest update of bison
(2.7), otherwise compilations ends with a "function already declared"
error.
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Fix runtime-relocation issues with the RPM and Smart wrappers.
In addition the patches were necessary to fix related problems.
The changes to the includes three categories of issues:
*) Incorrect pathname evaluations
*) Incorrect evaluation of the /etc/rpm/platform file contents
*) Confusing vendor #define checks
Finally, a simple way to debug the platformScore was added as
that is necessary to debug how this works and into the smart system.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
On ARM systems the platform matching code could fail in some cases, as
the system macros file could override the 'platform' file settings.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
When RPM is setup to dynamically reconfigure itself at runtime, we need
to avoid hard coded settings for _usrlibrpm and _etcrpm.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This item is only useful when the various development components are
installed.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
We want this enabled especially for the native case.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
We add a number of additional RPMSENSE values to the python module to better
support the dependency calculations in SMART.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
If python support is enabled we want to make sure that the RPM python support
is packaged properly.
Move the components into the site-packages directory, move the .la files to a
new -dev package.
Add "rpm" as a dependency of python-rpm, otherwise rpm and the associated
libraries won't be available.
Fixup python wrapper to handle automatic relocation, as supported by the
vendor WINDRIVER configuration. (Based on a patch from Paul Eggleton)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The overrides virtclass-native and virtclass-nativesdk are deprecated,
which should be replaced by class-native and class-nativesdk.
[YOCTO #3297]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
In certain cases with BerkleyDB 5.3.x we are getting the error:
db3.c:1443: dbcursor->pget(-30999): BDB0063 DB_BUFFER_SMALL: User memory too small fo
See https://bugs.launchpad.net/rpm/+bug/934420 for more information.
It appears to be some type of a bug in the BerkleyDB 5.3.x. In an attempt
to workaround the problem, when we encounter this situation we attempt
to adjust the size of the mmap buffer until the call works, or we
end up trying 10 times. The new size is either the updated vp->size
from the failed pget call, or the previous size + 1024.
If DBI debugging is enabled, additional diagnostics are printed, otherwise
a basic retry and success message is added to show that the failure was
resolved.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove the optimzation append from recipe and add the patch that is in the rpm
cvs repo, http://www.mail-archive.com/rpm-cvs@rpm5.org/msg08907.html. The -O2
optimzation append is removed since it can limit debugging options that are
provided when -O0 is used.
This was tested by setting: SELECTED_OPTIMIZATION = "-O0"
Signed-off-by: Morgan Little <morgan.little@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There is an issue that is caused when doing the install step of rpm on systems
with high parallelization where two jobs of make will fight for the same file
while installing the sub-directory lua. This is caused by the same makefile rule
being called twice in a way that both could be trying to install at the same
time.
This fix renames the linking rule so it will always be run after the needed
files are added and removed it's dependency so the required rule would only
run once.
This was tested heavily using ppss to run mutliple installs in parallel. This
wouldn't happen in practise but it was tested will all the individual rules as
well.
Signed-off-by: Morgan Little <morgan.little@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When attempting to build with uuid and all tests compiling will error because
uuid.h doesn't exist in the rpm tarball. Fix this by changing the include to
use the one in ossp which solves the issue.
The recipe already depends on ossp so ossp/uuid.h will be there when rpm-native
is built.
Signed-off-by: Morgan Little <morgan.little@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This solves a problem when installing rpm using the ipk pkg-management
system where /var/cache was conflicting with the existing /var/cache from
base-files.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The rpm should depend on bison-native, otherwise errors when "bitbake
rpm-native" in a fresh build:
| make[4]: Entering directory `/path/to/rpm-native-5.4.9-r46/rpm-5.4.9/syck/lib'
| bison -d -t -v -p syck -o gram.c gram.y
| make[4]: bison: Command not found
Basically, both the rpm-native and rpm should depend on bison-native,
but don't need depend on bison, but it seems that it isn't necessary
to add another depend line:
DEPENDS_virtclass-native = "libpcre-native ... bison-native"
So just add it to the DEPENDS.
[YOCTO #3123]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
| dbconvert.o: In function `rpmdb_convert':
| /local/jenkins/jobs/yocto-upstream/workspace/label/master/machine/p4080ds/poky/master/tmp/work/x86_64-linux/rpm-native-5.4.9-r45/rpm-5.4.9/tools/dbconvert.c:126: warning: the use of `tempnam' is dangerous, better use `mkstemp'
| dbconvert.o: In function `main':
| dbconvert.c:(.text+0x923): undefined reference to `htobe32'
| dbconvert.c:(.text+0xaa4): undefined reference to `htole32'
| dbconvert.c:(.text+0xac9): undefined reference to `htole32'
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
neon requires expat to be built first
lua similarly requires expat if enabled
selinux package name should be "libselinux" (from meta-selinux).
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These need to appear in DT_NEEDED for librpmio.so
for uclibc somehow it does not get added to link
cmdline so we do it explicitly.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
-fstack-protector needs libssp to link with
so when checking for this option support we
need to find if libssp is staged in root file
system
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
rpmatch is not there in uclibc therefore add logic to configure
to detect it.
x* wrappers need to be defined for uclibc as well.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Force pkg-config to only look in the install directory, and not be
able to fall back to system pkg-config directories for resolution.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add functionality to RPM to directly query the packageorigin (path) from
the resolver database, instead of having to do this via an indirect method.
This results in a minor performance improvement.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
RPM 5.4.9 now strongly encourages you to have the ossp-uuid library available.
Add this recipe, and change RPM to use the uuid functionality.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Beside upreving RPM, add necessary integration patches to libzypp.
Also change the configuration of RPM to support PACKAGECONFIG flags.
RPM is highly configurable, the default configuration is good for
minimal OE-Core use.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Mark Hatle
Hongxu Jia
Chen Qi
Paul Eggleton
Laurentiu Palcu
Ross Burton
Saul Wold
Bogdan Marinescu
Richard Purdie
Zhenhua Luo
Kang Kai
Constantin Musca
Robert Yang
Matthew McClintock
Khem Raj