| Age | Commit message (Collapse) | Author |
|---|
|
Adds support for a flag that is saved into Smart's configuration against
a package that says it should not be installed if it is only recommended
by a package being installed rather than required. This will enable us
to add BAD_RECOMMENDATIONS support for RPM.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
If a requirement of a package is conflicted, depending on how the
solution is reached, Smart's transaction code may eliminate all
providers of the requirement and then error out because nothing provides
them without saying why. To work around this, store a reason and report
that back if we need to, so for example instead of:
error: Can't install packagegroup-core-ssh-dropbear-1.0-r1@all: no package provides dropbear
we will now get:
error: Can't install packagegroup-core-ssh-dropbear-1.0-r1@all: unable to install provider for dropbear:
error: dropbear-2013.58-r1.0@armv5te is conflicted by openssh-sshd-6.2p2-r0@armv5te
Fixes [YOCTO #4305].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
* it's autodetected from sysroot
* add PACKAGECONFIG to make it deterministic
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Install python test suite and run it as ptest
Signed-off-by: Tudor Florea <tudor.florea@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This is now required by python-argparse-native as of OE-Core revision
8d0e84bdfaf63ad61be7b015dd55dacccfa9132c.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This is used by buildhistory-diff and the OE layer index, and thus will
be useful in the context of the build appliance and buildtools-tarball.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This is required by python-git.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This is required by python-gitdb.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This is required by python-gitdb.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
As python-multiprocessing requires python-threading and
python-pickle, this commit adds them as runtime dependency.
The observed behavior was:
When typing 'import multiprocessing' in the python shell on a
minimal image with only the python-multiprocessing recipe installed,
python reports at first:
Python 2.7.3 (default, Jun 27 2013, 08:26:25)
[GCC 4.7.2] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import multiprocessing;
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python2.7/multiprocessing/__init__.py", line 65, in <module>
from multiprocessing.util import SUBDEBUG, SUBWARNING
File "/usr/lib/python2.7/multiprocessing/util.py", line 38, in <module>
import threading # we want threading to install it's
ImportError: No module named threading
After adding python-threading as runtime dependency and rebuilding
the image, python reports:
Python 2.7.3 (default, Jun 27 2013, 08:26:25)
[GCC 4.7.2] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import multiprocessing;
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python2.7/multiprocessing/__init__.py", line 84, in <module>
import _multiprocessing
ImportError: No module named cPickle
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When typing 'import argparse' in the python shell on a minimal image
with only the python-argparse recipe installed, python reports:
Python 2.7.3 (default, Jun 27 2013, 08:26:25)
[GCC 4.7.2] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import argparse;
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python2.7/site-packages/argparse.py", line 91, in <module>
from gettext import gettext as _
ImportError: No module named gettext
The python-argparse recipe requires the python gettext module,
which is currently provided by python-codecs.
Hence, this commit adds python-codecs as runtime dependency to
resolve the issue.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
defs.c dependes on gdk-types.defs and gtk-types.defs. When parallel
compile, it may fails with:
"IOError: [Errno 2] No such file or directory: 'gtk-types.defs'"
Add them to dependences of defs.c to fix this issue.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The installation of __glib.so is invoked by install-data-am target
which are generated by automake. installing libpyglib-2.0-python is
invoked by install-exec-am.
"make install" will firstly install libpyglib-2.0-python, then install
__glib.so, the sequence should not be broken, since _glib.so has
dependence on libpyglib-2.0-python. But when enable parallel install,
the sequence maybe break then installation fails with:
"/usr/bin/ld: cannot find -lpyglib-2.0-python"
Disable parallel install to fix this issue.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Currently if you build nativesdk-python, install it and try and run it,
you see it search in the default nativesdk path for terminfo files
when the readline module is used.
If terminfo files cannot be found, or if the ones found are incorrect,
the system may emit control characters which confuse commandline
processing.
This patch sets the TERMINFO_DIRS variable to ensure the correct locations
are searched for terminfo files, starting with the nativesdk terminfo files
and falling back to the host systtem's.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This fixes errors in packages using python( build with gcc 4.8)
|
/home/jenkins/oe/shr-core-branches/shr-core/tmp-eglibc/sysroots/qemuarm/usr/include/python2.7/modsupport.h:27:1:
error: 'PyArg_ParseTuple' is an unrecognized format function type
[-Werror=format=]
| PyAPI_FUNC(int) PyArg_ParseTuple(PyObject *, const char *, ...)
Py_FORMAT_PARSETUPLE(PyArg_ParseTuple, 2, 3);
| ^
| cc1: all warnings being treated as errors
| cc1: all warnings being treated as errors
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a symlink to the native Python so that scripts can just invoke
"nativepython" and get the right one without needing absolute paths (these often
end up too long for the #! parser in the kernel as the buffer is 128 bytes
long).
The name "nativepython" was chosen to match the existing "nativeperl" which
serves the same purpose.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Base this on DISTRO_FEATURES, because we don't want it
unconditionally enabled.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Fixes the following failure at do_install building python-smartpm-native
if gettext-native has not already been built and gettext tools are not
installed on the host:
| compiling locale/it/LC_MESSAGES/smart.po -> locale/it/LC_MESSAGES/smart.mo
| sh: msgfmt: command not found
...
| creating $D/usr/share/share/locale/it/LC_MESSAGES
| error: can't copy 'locale/it/LC_MESSAGES/smart.mo': doesn't exist or not a regular file
Note that we need gettext-native in DEPENDS and not "inherit gettext"
here because for native variants, gettext.bbclass instead adds
gettext-minimal-native to DEPENDS and that does not provide the msgfmt
command.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
While the destro didn't install scons, build scons by python-scons-native,
and invoke it with the error:
...
$scons -h
Traceback (most recent call last):
File "/buildarea2/hongxujia/build-20130520-udev-emenlow/tmp/sysroots/x86_64-linux/usr/bin/scons", line 188, in <module>
import SCons.Script
ImportError: No module named SCons.Script
...
1, While building scons as default, scons's lib will be install in the dir of
`scons' or `scons-2.3.0' if the option `--install-lib' is not set explicitly.
2, While build python-scons-native, `--install-lib' is explicitly set, and
scons's lib was not installed in the dir of `scons' or `scons-2.3.0'.
3, While invoke scons-native, the scons searches the lib in ${STAGING_DIR_HOST}/
${PYTHON_SITEPACKAGES_DIR}/scons, ${STAGING_DIR_HOST}/${PYTHON_SITEPACKAGES_DIR}/
scons-2.3.0 rather than ${STAGING_DIR_HOST}/${PYTHON_SITEPACKAGES_DIR}.
Use create_wrapper to relocate scons-native to add `${STAGING_DIR_HOST}/${PYTHON
_SITEPACKAGES_DIR}' to PYTHONPATH, so scons-native could find out the lib.
[YOCTO #4562]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The license itself didn't modify, just some comments regarding the license.
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The class-native override is undoing the dependency that distutils-base
added which we require. This patch adds in the missing dependency manually
to ensure the build functions correctly.
Fixes [YOCTO #4502].
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
"2013" was added in the 'Copyright' line in LICENSE.txt.
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
We had hard coded python-native and python's default optimization to 1,
which made the "assert" statement didn't work, and removed the "-O/-OO"
(optimization options), the target python had a "-N" option to disable
the default optimization, but the native python didn't.
I think that we can set the environment variable PYTHONOPTIMIZE or use
"python -O" if we need to optimize, but I'm not sure whether we need to
set it by default, it would confuse the user or cause/hide unexpected
problems if the "assert" doesn't work.
[YOCTO #4427]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* HOMEPAGE was incorrect
* We're not really interested in the fact that Smart works across
different distros.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
When trying to import setuptools on a minimal image, it reports that some
python module is missing. We add those missing python modules as runtime
dependency.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Make CHANNELSDIR in smart empty, since this causes host contamination issues
on some RPM-based hosts on which smart is already installed.
[YOCTO #3881]
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When trying to import python-pprint on a minimal image, it reports that
the cStringIO python module is missing.
This is provided with python-io, so we add python-io as runtime
dependency.
The complete observed trace was:
Python 2.7.3 (default, Apr 4 2013, 07:45:36)
[GCC 4.7.2] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import pprint
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python2.7/pprint.py", line 40, in <module>
from cStringIO import StringIO as _StringIO
ImportError: No module named cStringIO
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix out of tree builds by adding missing path component.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
buildpaths
Running 'python setup.py build' would fail due to the python Makefile having
CC= i586-angstrom-linux-gcc -m32 -march=core2 -msse3 -mtune=generic -mfpmath=sse --sysroot=/home/koen/v2012.12/build/tmp-angstrom_v2012_12-eglibc/sysroots/fri2
CXX= i586-angstrom-linux-g++ -m32 -march=core2 -msse3 -mtune=generic -mfpmath=sse --sysroot=/home/koen/v2012.12/build/tmp-angstrom_v2012_12-eglibc/sysroots/fri2
'--with-libtool-sysroot=/home/koen/v2012.12/build/tmp-angstrom_v2012_12-eglibc/sysroots/fri2'
And more
Multiple users have reported this problem:
http://hipstercircuits.com/?p=499
http://www.gigamegablog.com/2012/09/09/beaglebone-coding-101-spi-output/
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Reference:http://bugs.python.org/issue14579
The utf-16 decoder in Python 3.1 through 3.3 does not update the
aligned_end variable after calling the unicode_decode_call_errorhandler
function, which allows remote attackers to obtain sensitive information
(process memory) or cause a denial of service (memory corruption and crash)
via unspecified vectors.
http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2012-2135
[YOCTO #3450]
Signed-off-by: yanjun.zhu <yanjun.zhu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The argparse module uses the textwrapper modules contained in
python-textutils.
Signed-off-by: Michael Thalmeier <michael.thalmeier@hale.at>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Modify the include file and script to generate a missing RDEPENDS.
Install python on target with python-io. Import ssl:
Python 2.7.3 (default, Feb 9 2013, 16:04:35)
[GCC 4.7.2] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import ssl
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python2.7/ssl.py", line 58, in <module>
ImportError: No module named textwrap
Installing python-textutils solves the issue.
Signed-off-by: MiLo <milo-software@users.sourceforge.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of a python backtrace, tell the user they need to install PyYAML
if they wish to use the --yaml output options.
Fixes [YOCTO #3768].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To fix some multilib issues, change the way the RPM backend decides
if two packages can coexist: if they have a different architecture,
automatically assume that they can coexist (which is fundamental for
multilib).
[YOCTO #3681]
(From OE-Core rev: 05fd850f09c58dba8f64f3fe1de28ed9f21890a2)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add obsolete_automake_macros.patch for both python-dbus and
python-pygobject that replace automake macros no longer supported
by automake-1.13 with modern constructs.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
smart's "config" command uses the Python pprint module. If it is not
present, "config" fails with this error:
#############
# smart config --help
error: Invalid command 'config'
#############
This patch adds a dependency on python-pprint which fixes the error.
Tested on qemux86/core-image-sato-sdk.
[YOCTO #3643]
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The license file was updated with a "2012" in the "Copyright" line,
nothing else changed in the license text.
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
random.py imports hashlib, so add this missing dependency.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Add code to check proper command line arguments for various
smart commands. Exit with error if erroneous/additional arguments
are given in the command line.
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Fix runtime-relocation issues with the RPM and Smart wrappers.
In addition the patches were necessary to fix related problems.
The changes to the includes three categories of issues:
*) Incorrect pathname evaluations
*) Incorrect evaluation of the /etc/rpm/platform file contents
*) Confusing vendor #define checks
Finally, a simple way to debug the platformScore was added as
that is necessary to debug how this works and into the smart system.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
* distutils.bbclass now removes that directory
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Conflicts:
meta/recipes-devtools/python/python-smartpm_1.4.1.bb
|
|
Built-in provides were not being compared properly within smart.
This was caused by an incorrect argument to the match function.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Add support for an rpm-extra-macros config option which can be
used to define some extra macros that need to be set for rootfs
construction to work on the host and that don't really warrant
their own specific named config options to be created.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Allowing us to turn on these options enables installation of base-files
which contains a symlink to /proc/mounts which is auto-detected as a
dependency and isn't provided by any other package.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This directory if present in the rootfs interferes with proper
installation of base-files and doesn't seem to need to be there
for smart/rpm to work in any case.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The XML indexes in rpm-md were being parsed incorrectly leading to the
package metadata (e.g. dependencies) not being read.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
* Use ${PN} instead of python-smartpm
* Use multi-line strings instead of multiple single line += (also
avoiding the confusing "_append +=")
* Use class-native instead of virtclass-native - no difference in
behaviour, but this keeps things consistent if we have to add
any target overrides in future.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Implement support within Smart for handling RRECOMMENDS relationships
between RPM packages as used by OE. This includes support within the
base system for caching and resolving these relationships as well as
specific support in the RPM backend for reading the information from
packages, and reading the "missingok" flag added to createrepo for
rpm-md feeds.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
gdk.c depends on gtk-types.defs but
gdk/Makefile.am miss this. This will cause
build error sometimes when built
with multi-jobbing, so add gtk-types.defs into
gdk.c dependence.
[YOCTO #3460]
Signed-off-by: Song.Li <Song.Li@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
Paul Eggleton
Martin Jansa
Tudor Florea
Lukas Bulwahn
Kai Kang
Richard Purdie
Khem Raj
Ross Burton
Dan McGregor
Hongxu Jia
Bogdan Marinescu
Cristian Iorga
Robert Yang
Koen Kooi
Jackie Huang
yanjun.zhu
Michael Thalmeier
MiLo
Marko Lindqvist
Mark Hatle