| Age | Commit message (Collapse) | Author |
|---|
|
The original patch contained some text which shouldn't have been there
and used brackets in configure which isn't a great idea. Tweak the patch
to resolve this.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 63cbf187fe189c99645fe3afee8a6361a9a32cdc)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
|
|
A build date was leaking into the generated docs and makefile used for
ptests leading to reproducibility issues each time the month changed.
Add a patch to use SOURCE_DATE_EPOCH to derive it if available.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 6a9ca7aec4991eabd425e32fdf85f51bb1686b8b)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
|
|
Signed-off-by: Alejandro del Castillo <alejandro.delcastillo@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
By default, the opkg-key command is not included in pokg package because
it is only installed when gpg support is enabled. We'd better check if
it exists before run 'opkg-key populate' in pkg_postinst.
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
- Drop open_inner.patch
- Drop opkg_archive.patch
- Remove "remove_test_binaries" function
Signed-off-by: Alejandro del Castillo <alejandro.delcastillo@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This avoids including irrelevant information when calculating the
license checksum.
License-Update: Trim the text part used for the license file checksum
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
An ipk with a zero size data.tar file caused opkg to crash with a
double free abort. Add the upstream fixes for this.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
gnupg-gpg is a minimal installation of gnupg with enough functionality
to verify signatures and manage keys. Use this package instead of full
gnupg to slim down opkg installations with "--enable-gpg".
Signed-off-by: Haris Okanovic <haris.okanovic@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The service file was removed in oe-core 23dcf7ea but the inherit was not.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
pathfinder has no recipe and its last update was in 2013
(see http://freshmeat.sourceforge.net/projects/pathfinder),
so it should be removed from the list of PACKAGECONFIG options
for opkg. --disable-pathfinder is added to EXTRA_OECONF for
good measure.
Signed-off-by: Trevor Gamblin <trevor.gamblin@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Some distributions for various reasons (like for example mounting a
tmpfs over /var at runtime) can't use /var/lib to store the opkg
metadata, so a different path is required to have a functioning
package manager.
${localstatedir} can't be modified to something other than the
hardcoded value in bitbake.conf because other recipes depending on it
will fail to install.
So the only recourse, which is also the least invasive, is to allow
distros to overwrite the OPKGLIBDIR variable just like they are also
allowed to overwrite OPKGBUILDCMD.
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
- Drop 0001-libopkg-add-add-ignore-recommends-option.patch
- Drop 0001-opkg-add-target-for-testsuite-installation.patch
- Drop 0001-regress-issue72.py-resolve-paths-before-comparision.patch
- Remove test binaries tests\libopkg_test, leftovers from make dist
process
Signed-off-by: Alejandro del Castillo <alejandro.delcastillo@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
there is small issue with ptest packaging in cases where
OPKGLIBDIR is set to /usr/lib.
Then all ptest files get packaged in libopkg instead of opkg-ptest and correct QA error is triggered:
ERROR: QA Issue: /usr/lib/opkg/ptest/tests/opkgcl.py contained in package libopkg requires /usr/bin/python3, but no providers found in RDEPENDS_libopkg? [file-rdeps]
# $FILES_libopkg
# set /jenkins/mjansa/build-webos-master/oe-core/meta/recipes-devtools/opkg/opkg_0.4.0.bb:62
# "${libdir}/*.so.* ${OPKGLIBDIR}/opkg/"
FILES_libopkg="/usr/lib/*.so.* /usr/lib/opkg/"
# $FILES_opkg-ptest [2 operations]
# set /jenkins/mjansa/build-webos-master/oe-core/meta/classes/ptest.bbclass:9
# "${PTEST_PATH}"
# rename from FILES_${PN}-ptest data.py:117 [expandKeys]
# "${PTEST_PATH}"
# pre-expansion value:
# "${PTEST_PATH}"
FILES_opkg-ptest="/usr/lib/opkg/ptest"
# $PACKAGES [4 operations]
# set /jenkins/mjansa/build-webos-master/oe-core/meta/conf/bitbake.conf:292
# "${PN}-src ${PN}-dbg ${PN}-staticdev ${PN}-dev ${PN}-doc ${PN}-locale ${PACKAGE_BEFORE_PN} ${PN}"
# set /jenkins/mjansa/build-webos-master/oe-core/meta/conf/documentation.conf:314
# [doc] "The list of packages to be created from the recipe."
# prepend /jenkins/mjansa/build-webos-master/oe-core/meta/classes/ptest.bbclass:20
# "${@bb.utils.contains('PTEST_ENABLED', '1', '${PN}-ptest', '', d)}"
# prepend /jenkins/mjansa/build-webos-master/oe-core/meta/recipes-devtools/opkg/opkg_0.4.0.bb:60
# "libopkg"
# pre-expansion value:
# "libopkg ${@bb.utils.contains('PTEST_ENABLED', '1', '${PN}-ptest', '', d)} ${PN}-src ${PN}-dbg ${PN}-staticdev ${PN}-dev ${PN}-doc ${PN}-locale ${PACKAGE_BEFORE_PN} ${PN}"
PACKAGES="libopkg opkg-ptest opkg-src opkg-dbg opkg-staticdev opkg-dev opkg-doc opkg-locale opkg"
The easiest fix should be to reorder PACKAGES (the _prepends) so that ${PN}-ptest is prepended later -> ends before libopkg).
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Install opkg test suite and run it as ptest.
Signed-off-by: Alejandro del Castillo <alejandro.delcastillo@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To be used for BAD_RECOMMENDATIONS feature.
Signed-off-by: Alejandro del Castillo <alejandro.delcastillo@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
- Drop 0001-remove_maintainer_scripts-use-strict-matching.patch
Signed-off-by: Alejandro del Castillo <alejandro.delcastillo@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
During removal, opkg is using globs to select which metadata files to
remove. The glob is too broad and sometimes can result in a package
removing the metadata from a package with a close name. Make the
matching more strict.
Fixes bugzilla 12905
Signed-off-by: Alejandro del Castillo <alejandro.delcastillo@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Since `229f4e9 package.bbclass: add support for
pkg_postinst_ontarget()' applied in oe-core, use
pkg_postinst_ontarget to run postinst at first boot.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
OpenEmbedded has a built-in mechanism to run postinst scripts offline
at build time or, if necessary, on first boot (delayed execution). If
the latter is the case and systemd is in use, two services end up
doing the same thing:
- opkg-configure.service starts "opkg configure" directly.
- run-postinsts.service starts "/usr/sbin/run-postinsts" which runs
postinst scripts stored in /etc/ipk-postinsts/ or "opkg configure"
if package management is installed.
Since the run-postinsts.service is also used in cases where no
package management is in use, it is the primary means of handling
postinsts.
Get rid of the opkg-configure.service to avoid duplicate opkg
configure execution.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
0.3.5 -> 0.3.6
Signed-off-by: Alejandro del Castillo <alejandro.delcastillo@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Huang Qiyu <huangqy.fnst@cn.fujitsu.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
In case a systemd service disables itself while init is still in its
boot sequence the reloading of the service files can be problematic.
In that case: It seems that systemd looses the state of .device units,
and some services depend on such units (namely serial consoles such as
serial-getty@ttymxc0.service). As a result no getty is spawned on the
affected serial tty.
After a power-cycle the second boot (which does not disable services)
succeeds.
The following sequence shows this problem:
| Jan 09 16:36:28 apalis-t30 systemctl[162]: Removed /etc/systemd/system/sysinit.target.wants/run-postinsts.service.
| Jan 09 16:36:28 apalis-t30 systemd[1]: Reloading.
| ...
| And then the failing one:
| Feb 22 15:33:15 apalis-t30 systemd[1]: dev-ttyS0.device: Job dev-ttyS0.device/start timed out.
| Feb 22 15:33:15 apalis-t30 systemd[1]: Timed out waiting for device dev-ttyS0.device.
| Feb 22 15:33:15 apalis-t30 systemd[1]: Dependency failed for Serial Getty on ttyS0.
| Feb 22 15:33:15 apalis-t30 systemd[1]: serial-getty@ttyS0.service: Job serial-getty@ttyS0.service/start failed with result 'dependency'.
| Feb 22 15:33:15 apalis-t30 systemd[1]: dev-ttyS0.device: Job dev-ttyS0.device/start failed with result 'timeout'.
| Feb 22 15:33:15 apalis-t30 systemd[1]: Reached target Login Prompts.
(the time has been updated between this two events, but that does not
influence the issue)
Using --no-reload in the service file avoids the "Reloading." message
above and seems to not cause such issues anymore.
Reported-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
(cherry picked from commit 16b7b455ee40fd1be5bb9aacf24b106df0d9325e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Drop status-conffile.patch, present in 0.3.5.
Signed-off-by: Alejandro del Castillo <alejandro.delcastillo@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The logic is scattered all over the place, but amounts to
"install, unless the rootfs is read only". Let's express that directly.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
The libsolv backend is vastly superior than the currently enabled
internal ad-hoc solver. While the switch does have a small impact on
disk and memory footprint, it make sense to change the default as for
most cases the disk/memory footprint hit should be acceptable.
========================
Disk Footprint Increase
========================
qemux86-64 523K
qemuarm 445K
qemux86 576K
====================================================
Command [1] Libsolv Internal Solver
====================================================
opkg update 26.21 MB 26.21 MB
opkg list 29.87 MB 29.87 MB
opkg install procps 30.99 MB 27.33 MB
opkg remove procps 1.69 MB 1.69 MB
opkg update 30.97 MB 27.75 MB
[1] Profile done via 'valgrind --tool=massif <command>' in a feed with
~18K packages.
Signed-off-by: Alejandro del Castillo <alejandro.delcastillo@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If a conffile has been deleted (common when building a debugfs) the status
command will throw errors instead of handling that situation. Stop the code
being executed in the first place if it wasn't asked for, and handle errors
gracefully.
[ YOCTO #10761 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* Add localstatedir and sysconfdir class-native configure definitions to
override OE default sysroot values.
Signed-off-by: Alejandro del Castillo <alejandro.delcastillo@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
LICENSE and LIC_FILES_CHKSUM apply to the sources specified by SRC_URI,
not to the recipe itself. As such a license declaration for a source-less
recipe makes little sense. The LICENSE declaration is mandatory, but
LIC_FILES_CHKSUM can be removed in such cases.
Remove the LIC_FILES_CHKSUM declarations from all recipes that do not
need it.
CC: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Olaf Mandel <o.mandel@menlosystems.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Bug fix release to address two regressions:
* Fix build breakage when using configure option --enable-sha256
* Do not remove packages if removal operation is not valid due to
installed dependents
Signed-off-by: Alejandro del Castillo <alejandro.delcastillo@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* Drop merged patches
* Update libsolv PACKAGECONFIG config option
Signed-off-by: Alejandro del Castillo <alejandro.delcastillo@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* Drop merged patches
* Add patch to fix crash when using the libsolv backend
* Add patch to add pkgconfig support for libsolv
* Add libsolv support via a PACKAGECONFIG option.
Signed-off-by: Alejandro del Castillo <alejandro.delcastillo@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Alejandro del Castillo <alejandro.delcastillo@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This avoids a "Could not unlink" warning when extracting a /var/run
symbolic link pointing to /run from the base-files package as it is
unable to unlink the /var/run directory when it contains opkg.lock.
This also fixes an issue where /var/run is created as a directory
instead of a symbolic link to /run.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Acked-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Helps with compling it on musl
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Changes required:
- Rename opkg-cl to opkg
- Add libarchive dependency
- Drop backport patches
- Drop obsolete directory options
- Add patch to handle empty index files
Based on initial work by Paul Barker.
Signed-off-by: Alejandro del Castillo <alejandro.delcastillo@ni.com>
CC: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Default behavior of opkg was to use ${OPKGLIBDIR}/opkg/lists;
but in our recipe we modify it to ${OPKGLIBDIR}/opkg/${OPKGLIBDIR}/opkg/,
when appending package-management to IMAGE_FEATURES these lists are
populated during build time (using the default directory),
but since our config was different these populated lists were never used at runtime,
this patch solves this inconsistency by using default behavior for both build time and runtime.
[YOCTO #6966]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Opkg's configure script doesn't use the value from --sysconfdir to determine
the location of the conf file, it uses the value from --with-opkgetcdir
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This recipe doesn't unpack any source, so set S to ${WORKDIR}.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
There is no -Werror in libopkg/Makefile.am any more.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There should be only one dev and dbg package
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch was part of the 0.2.4 release.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
If this package were ever recompiled, i.e. do_compile is rerun
as a result of a compiler change, etc., the 'opkg.conf' file
would be incorrectly updated, leading to an error:
* opkg_conf_set_option: Duplicate option lists_dir, using first seen value "/var/lib/opkg".
Signed-off-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Given that bitbake.conf sets the default values:
BP = "${BPN}-${PV}"
S = "${WORKDIR}/${BP}"
there are a number of recipes that set the variable S completely
superfluously, so get rid of them.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
SYSTEMD_SERVICE doesn't need to be set conditionally, and units should be
installed if the systemd DISTRO_FEATURE is enabled, not if sysvinit isn't
enabled.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This recipe wraps package and package feed verification keys into a package,
making the management and deployment of verification keys much easier. Comments
on how to select keys for inclusion in this package are provided in the recipe
file.
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
|
|
The improvements to opkg-key made for v0.3.0 are backported. The rest of v0.3.0
needs further testing and bugfixing prior to release, but the improvements to
opkg-key have been tested and work well.
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
|
|
All non-arch-specific and non-distro-specific configuration is now kept in the
main 'opkg' recipe and package.
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
|
|
There is no benefit to having a separate .inc file when we only support one
version of opkg.
The .inc file had multiple do_install_append functions and several variables
were defined out of the usual order. This arrangement should be better.
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
|
|
Instead of having the source files 'opkg.conf.comments', 'dest' and 'src', we
simply have one 'opkg.conf' file containing all the necessary configuration.
This does mean that replacing 'src' in a bbappend to define distro-specific
package feeds is no longer supported, but these feed configurations should be
packaged separately from the rest of the opkg configuration anyway so that
things can be updated independently. The best recipe to use for managing feed
configs is currently distro-feed-config in the meta-oe layer.
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
|
Richard Purdie
Alejandro del Castillo
Yi Zhao
Peter Kjellerstedt
Haris Okanovic
Ross Burton
Trevor Gamblin
Adrian Ratiu
Changqing Li
Martin Jansa
Hongxu Jia
Stefan Agner
Huang Qiyu
Max Krummenacher
Alexander Kanavin
Olaf Mandel
Jonathan Liu
Khem Raj
Alejandro Hernandez
André Draszik
Robert Yang
Paul Eggleton
Gary Thomas
Robert P. J. Day
Paul Barker