Age | Commit message (Collapse) | Author |
|
If CONFIG_SYSLOGD is not enabled, then the related service file should
not be installed as it will always fail at system start-up. The error
message is as following.
[FAILED] Failed to start System Logging Service.
The same logic applies to CONFIG_KLOGD.
So we should first check the configuration before we install these
service files.
[YOCTO #5302]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
systemd complains with
| Configuration file /lib/systemd/system/dbus.socket is marked executable. Please remove executable permission bits. Proceeding anyway.
| Configuration file /lib/systemd/system/dbus.service is marked executable. Please remove executable permission bits. Proceeding anyway.
else.
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
on rebuilds, dbus-native can detect an already existing dbus-glib and
tries to link some tests against it. As files were unstaged and due
to libtool insanities this fails with:
| /usr/bin/grep: .../sysroots/x86_64-oe-linux/usr/lib/libdbus-1.la: No such file or directory
| sed: can't read .../sysroots/x86_64-oe-linux/usr/lib/libdbus-1.la: No such file or directory
| x86_64-oe-linux-libtool: link: `.../sysroots/x86_64-oe-linux/usr/lib/libdbus-1.la' is not a valid libtool archive
| make[3]: *** [libdbus-testutils.la] Error 1
| make[3]: Leaving directory `.../work/x86_64-oe-linux/dbus-native/1.8.2-r0/build/test'
Make builds predicatable (and working) by disabling usage of dbus-glib
explicitly.
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Overwriting of /etc/mtab would fail as below if the /etc/mtab link already
exist during installation phase, this patch fix this problem by checking
existance of the link before try to overwrite it.
Error message during installation if the /etc/mtab exists:
"cat: /proc/mounts: input file is output file
Signed-off-by: Shan Hai <shan.hai@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The tests are installed to $libexecdir not $libdir/glib-2.0. By default these
are the same location but they can be changed independently.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the interface is slow to come up udhcpc will continue in the background
[YOCTO #6339]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We have this in recipes-bsp/grub/grub/40_custom:
[snip]
menuentry "Linux" {
set root=(hd0,1)
linux /vmlinuz root=__ROOTFS__ rw __CONSOLE__ __VIDEO_MODE__ __VGA_MODE__ quiet
}
[snip]
These lines are only for initrdscripts/files/init-install.sh, the side
effect is that it would make the target's grub-mkconfig doesn't work
well since the 40_custom will be installed to /etc/grub.d/40_custom, the
grub-mkconfig will run the 40_custom, and there will always be a
'menuentry "Linux"' menu in grub.cfg no matter it is valid or not, we
can do this in init-install.sh rather than grub to fix the problem,
which is also much simpler.
We have done the related work in init-install.sh, now we need remove our own
40_custom, and use grub's own 40_custom which is the right one.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We enable the python module in nativesdk-libxml2, but the python binary
used is in the native sysroot and thus you get the module installed in
the wrong path. Even with that fixed the python files are still
unpackaged, so create an ${PN}-python package and add them to it. (This
does not affect the libxml target build at all since python is disabled
for that.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The alloca() function allocates space in the stack frame of the caller,
so using alloca(new_size - old_size) would possibly crash the stack,
causing a segment fault error.
This patch fixes the above problem by avoiding using this function in
journal-file.c.
[YOCTO #6201]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
readline hand-maintains config.h.in so exclude autoheader and re-use a patch
from readline-6.3 to fix a typo in variable names.
See oe-core 8c37d32d6133c6ad2b9142e7a42775e7a979b570 against readline-6.3 for
further rationale.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of shipping a fork of the upstream aclocal.m4, simply rename it to
acinclude.m4 at configure time. We don't need the fork now that autoheader is
excluded.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These recipes all use pkg-config in some way but were missing
dependencies on the tool, this patch adds them.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
sulogin is provided by both busybox in /sbin/sulogin and util-linux provides one
in /usr/sbin/sulogin, so move util-linux's to sbin and setup ALTERNATIVE_LINK.
[YOCTO #6384]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
boots on all qemu machines
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The update-rc.d treated priority numbers begin with '0' as octal
numbers. This led to problems of update-rc.d being unable to handle
priorities like '08' or '09' correctly.
This patch fixes the above problem.
[YOCTO #6376]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of shipping a fork of the upstream aclocal.m4, simply rename it to
acinclude.m4 at configure time. We don't need the fork now that autoheader is
excluded.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
readline ships a hand-maintained config.h, instead of letting autoheader
generate one from configure.ac. The required arguments to AC_DEFINE are not in
configure.ac so autoheader will produce warnings and the generated code will not
behave as expected.
Solve this by excluding autoheader from autoreconf, so the upstream config.h.in
is used.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
readline maintains config.h.in by hand but several symbols are incorrect. Fix
these so that the test results are reflected in config.h.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We have this in recipes-bsp/grub/grub/40_custom:
[snip]
menuentry "Linux" {
set root=(hd0,1)
linux /vmlinuz root=__ROOTFS__ rw __CONSOLE__ __VIDEO_MODE__ __VGA_MODE__ quiet
}
[snip]
These lines are only for initrdscripts/files/init-install.sh, the side
effect is that it would make the target's grub-mkconfig doesn't work
well since the 40_custom will be installed to /etc/grub.d/40_custom, the
grub-mkconfig will run the 40_custom, and there will always be a
'menuentry "Linux"' menu in grub.cfg no matter it is valid or not, we
can do this in init-install.sh rather than grub to fix the problem,
which is also much simpler.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
mount.sh in udev-extraconf was modified to use /run/media instead
of /media. Unfortunately, our scripts in initrdscripts have some
dependency on the auto-mounting mechanism proviced by udev-extraconf.
So these scripts should also be fixed to use /run/media instead /media,
otherwise, our live image cannot work correctly.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of using 'ls /dev/sd*' command to list block devices, we
should rather use 'cat /proc/partitions'.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The error was introduced by the following commit.
acfe3014d41de5e87cdbc58d0396349c6b9c3ffd
udev-extraconf: update mount.sh to use /run/media instead of /media
It accidently replaced 'device/media' by 'device/run/media' which causes
error for live images to be unable to boot up correctly, complaining
"Cannot find rootfs.img in /media/*".
This patch fixes the above problem.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Add a brief subject mentioning what the patch is for
* Add Upstream-Status
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Do not use readlink to set ABS_GLIB_RUNTIME_LIBDIR when cross
compiling. Doing so causes host paths to potentially pollute the
target. Unfortunately in this case we don't actually convert to
an absolute path.
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Upgrade dbus to 1.8.2.
Modify ptest suite to make it enabled on new version.
If systemd in DISTRO_FEATURES, we expect to install dbus systemd
unit files.
Remove unneeded patches since it's included in new version.
Remove unrecognized option: "--with-xml"
[YOCTO #6092]
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Fixes [YOCTO #4497]
Usage of FILESPATH is discouraged, since it can make recipes harder
to bbappend. Instead FILESEXTRAPATHS should be used to extend the path.
If possible try to use any of the default FILESPATH dirs.
Also remove superfluous comment and do minor indentation fix.
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #4497]
Usage of FILESPATH is discouraged, since it can make recipes harder to
bbappend. Instead FILESEXTRAPATHS should be used to extend the path.
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #4497]
Usage of FILESPATH is discouraged, since it can make recipes harder to
bbappend. Instead FILESEXTRAPATHS should be used to extend the path.
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
systemd version 212 removed the TCP wrappers support, so remove the
PACKAGECONFIG stanza for it.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The patches Fix-Werror-format-string, gio-test-race, gtest-skip-fixes, and
ptest-dbus have all been merged upstream.
Two license checksums changed as upstream has updated the FSF address in those
files.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove unconditional enable-xz, its specified by PACKAGECONFIG anyway
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
When compiling util-linux, it's possible to encounter the following error.
/bin/sh: line 2:: misc-utils/uuidd.8.tmp: No such file or directory
This is because that the misc-utils directory doesn't exist when trying to
write to misc-utils/uuidd.8.tmp.
When generating misc-utils/uuidd.8 (or anything in PATHFILES), its directory
may not have been created yet. So we need to ensure the existence of the
directory to avoid the compilation error.
[YOCTO #6292]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* The SRC_URI is not accessible.
So need to add mirror site referred by the original site.
* The problem is that
http://download.savannah.gnu.org/releases redirects to closest mirror
and few mirrors (e.g. .jp) weren't working correctly while
http://download-mirror.savannah.gnu.org/releases/ seems to be reliable.
* Add SAVANNAH_GNU_MIRROR and SAVANNAH_NONGNU_MIRROR variable in bitbake.conf.
* Change the SRC_URI using the new variable.
Signed-off-by: Changhyeok Bae <changhyeok.bae@lge.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It was discovered that libxml2, a library providing support to read,
modify and write XML files, incorrectly performs entity substituton in
the doctype prolog, even if the application using libxml2 disabled any
entity substitution. A remote attacker could provide a
specially-crafted XML file that, when processed, would lead to the
exhaustion of CPU and memory resources or file descriptors.
Reference: https://access.redhat.com/security/cve/CVE-2014-0191
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
baselib contains the current "lib" value so pass this into
uclibc's configration to allow multilib builds to work correctly.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Some classes of recipe disable ptest even though its in DISTRO_FEATURES
(e.g. nativesdk). We shouldn't attempt to build ptest packages when
its disabled. This replaces some DISTRO_FEATURE checks with PTEST_ENABLED
checks instead.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Small optimisation in /etc/init.d/populate-volatile.sh.
Replace:
cat <file> | sed -e xxx
By:
sed -e xxx <file>
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Replace:
cat <file> | grep xxx
By:
grep xxx <file>
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Replace:
cat <file> | sed -e xxx
By:
sed -e xxx <file>
+ fix indentation
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
make ldconfig default to /lib+/usr/lib, /lib32+/usr/lib32 and
/lib64+/usr/lib64 on bi-ABI architectures.
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
In poky with systemd enabled, vt102 is selected for getty
causing user to experience a very crappy terminal. Default
TERM to xterm.
Reviewed-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
We need to use gcc-nm and gcc-ar to deal with slim objects
which are generated when using -flto
(From OE-Core rev: e6d84c9f4fef201217ada60711ecfb94bc5dc2e0)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The class itself currently does nothing. The idea is to mark all recipes that
make use of the texinfo utilities. In the future, this class could be used to
suppress the generation/formatting of documentation for performance,
explicitly track dependencies on these utilities, and eliminate Yocto's
current dependency on the host system's texinfo utilities.
Signed-off-by: Max Eliaser <max.eliaser@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
rebase util-linux-native patch
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This allows them to co-exist together in the native sysroot, with one
set of cross tools per target architecture.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The check for the config variable is using the wrong define
resulting in the #else always being used.
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Now Separated out libgcc-initial is there
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|