Age | Commit message (Collapse) | Author |
|
As with the Python test, this can be both better and faster. No need to copy a
file, just run a one-liner.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Currently this is three test cases:
1) test_python_exists. Fail if python3 isn't in PATH.
2) test_python_stdout. Run a Python script and check the output is as expected
3) test_python_testfile. Check that a file test_python_stdout wrote to exists.
(1) should be a setup and skip the test module if it isn't present.
(2) and (3) should be merged, there's no point copying over a two line Python
file, and the test doesn't verify that the file doesn't exist in the first
place.
Rewrite the test to check that Python is present in a class setup so the entire
test is skipped if it isn't and do some simple rot13 to verify that bytecode is
being executed correctly.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
These platform specifc BSPs were removed from meta-intel and superseded by
intel-core* BSPs.
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The following error message when starting core-image-weston is not
critical as long as the image could start up correctly. So extend
the common_errors list for parselog.py test case to ignore this
message.
logind: cannot setup systemd-logind helper (-61), using legacy fallback
[YOCTO #12835]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We are going to let runtime test support kernel tests. Now we just add
kernel self-contained sample tests. And we plan to add overall kernel
tests in the future.
This patch is just add kernel samples test which contains about 13 tests
enabled by kernel-sample.scc. So it needs statement,
KERNEL_FEATURES_append += " features/kernel-sample/kernel-sample.scc" in
local.conf.
Signed-off-by: Hongzhi.Song <hongzhi.song@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The test cases assume that rpm-doc is built out, as it says it its
comment. This is not always true. And it sometimes results in
following error.
| cls.tc.target.copyTo(test_file, dst)
| UnboundLocalError: local variable 'test_file' referenced before assignment
Change to use base-passwd-doc, as this package is more likely to be
built out than rpm-doc.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The following message from watchdog is not an error.
"error retry time-out = 60 seconds"
Checking watchdog's source codes, we have:
src/watchdog.c: log_message(LOG_INFO, "error retry time-out = %d seconds", retry_timeout);
It's clear this is an info message, so parselogs should ignore it.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add the following line to common_errors list.
Failed to read /var/lib/nfs/statd/state: Success
This message is not harmful, it does not result in rpc.statd starting
failure.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The test works by excluding curl-dev which curl-staticdev depends upon.
When static libraries aren't disabled, this leads to an odd looking test
failure.
Simply exclude curl-staticdev as well in case its enabled to make sure
the test always works.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As I will be leaving Intel, this address will no longer be valid,
so swap it for my personal one for now.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The test_file_connman should be executed only when 'lib32-connman' is
installed and 'connman' is not installed.
When lib32-connman and connman are both installed, the /usr/sbin/connmand
could be from connman or lib32-connman, depending on the installation
order. What we want to check is the connmand command from lib32-connman,
so we need to make sure that connman is not there to cause chaos.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
1) The test cases use 'readelf' command to do the check. This command
is from binutils. So skip the test if the needed binutils package is
not installed.
The related error message in log.do_testimage is like below.
Output: sh: readelf: not found
2) The test case tests /lib/libc.so.6 from lib32-libc6. So skip the test
if lib32-libc6 is not installed.
The related error message in log.do_testimage is like below.
Output: readelf: Error: 'lib/libc.so.6': No such file
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This test case should only run when rpm package is installed.
So skip it if rpm package is not installed. This fixes:
RESULTS - rpm.RpmBasicTest.test_rpm_help - Testcase 1059: FAILED
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add test cases to test “exclude” and “installroot“ options, also modify
the logic of filtering packages on the feed to have all the packages
needed by the tests.
[YOCTO #10744]
Signed-off-by: Jose Perez Carranza <jose.perez.carranza@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For example, core-image-sato skipped the test alltogether, as it
no longer pulls in Python 2.x at all.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Since the wtmp and btmp definitions had been moved from logrotate.conf
to logrotate.d in this release, we also need to install them to
/etc/logrotate.d/.
Also update oeqa runtime logrotate test case.
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add runtime test for stap to test basic SystemTap
operations: can compile very basic module and run on
target device.
Note we disable (-DSTP_NO_VERREL_CHECK) SystemTap
additional kernel release check since during OE testing
mismatching kernel-devsrc and kernels are used.
Signed-off-by: Victor Kamensky <kamensky@cisco.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Kernels which use tools/objtool can now fail when building external modules
due to objtool being missing, the generated files can also cause problems
for kernel-devsrc.
Ensure objtool is generated in make-mod-scripts by also calling
"make prepare".
For devsrc, delete the generated binaries since they'd be native
binaries and unsuitable for the target.
The oeqa kernel module tests also need to have the additional "make prepare"
step added.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add runtime test for opkg to test that it can install ipk
package from remote source.
[YOCTO# 11488]
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add runtime test for apt to test that it can install deb
package from remote source.
[YOCTO# 11488]
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
(From OE-Core rev: 497a95b576e19e39e20ac280d0db24f51b7c9679)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We see occasional network glitches which break this test. Use our own
mirror (which has a .gz instead of .bz2) to avoid the errors, we're not
trying to test network connectivity.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
That's the whole point isn't it? Previously this testcase succeeded
even if some of the underlying on-target tests failed; the only way
to find out if anything was wrong was to manually inspect the logs.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
only when ptest-runner is availalble;
Previously the test would execute only when all available ptests
for packages in the image were installed; some of those tests may
be broken, never finish, take a very long time or simply irrelevant
to the user who wants to check ptests of only a few specific packages,
and does so by listing them explicitly via IMAGE_INSTALL_append or similar.
Presence of ptest-runner means there is at least one ptest package installed
as they pull it in via a class dependency; ptest-runner is not generally
installed otherwise.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It works now.
[YOCTO #11547]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The packages' test cases maybe skipped, check and save them.
[YOCTO #11547]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Make it work with current oeqa
* Skip the test if ptest is not in DISTRO_FEATURES
* Skip the test if ptest-pkgs is not in IMAGE_FEATURES
* The logs are saved to:
testimage/ptest_log -> testimage/ptest_log.<datetime>
* This provides data that could be used to detect regressions in ptest results
[YOCTO #11547]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
THe newner kernels have ope firmware support enabled which leads to warnings
during boot on mips. These aren't interesting and we should ignore them.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Buildiptables test cases are conflicting with images built with “musl”
as standard C library, in order to avoid those issues lzip package was
selected to be used on the tests as this does not have any "musl"
dependency.
This patch is applicable for testimage tests
[YOCTO # 11713]
Signed-off-by: Jose Perez Carranza <jose.perez.carranza@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The OEQA framework has internal methods for provide functionality
in decorators so Test components aren't expected to override it.
Use the base unittest methods for setUp and tearDown.
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This error is seen on the Braswell RVP platform we have been using for
testing. The error is caused by atkbd.c keyboard driver, which is only
for AT and PS/2 keyboards. I tested a PS/2 keyboard with the board,
which worked fine, and the board does not have a separate AT connector,
so this error won't cause any functional issues.
[YOCTO #10110].
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The NUC6 has issues bringing up Bluetooth early in the boot sequence. We
see:
[ 4.091790] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 4.097326] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[ 4.145317] Bluetooth: hci0: Failed to send firmware data (-38)
Followed by this later on:
[ 11.509870] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 11.509988] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[ 13.090308] Bluetooth: hci0: Waiting for firmware download to complete
[ 13.090829] Bluetooth: hci0: Firmware loaded in 1549114 usecs
[ 13.090987] Bluetooth: hci0: Waiting for device to boot
[ 13.101958] Bluetooth: hci0: Device booted in 10818 usecs
Bluetooth does successfully come up and the firmware is loaded. This
behavior is consistent across all kernels I've tested.
[YOCTO #10628].
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Rather than hard-coding the tmpdir for TargetBuildProject to /tmp allow the
parent's default handling to define an appropriate tmpdir.
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add the corresponding Testopia ID to the test cases for dnf
Signed-off-by: Jose Perez Carranza <jose.perez.carranza@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There were two missing cases to be migrated to the new framework: _qemutiny and
_ptest.
qemutiny was straightforward.
ptest on the other hand wasn't working even in previous releases; it has been
migrated from smart to dnf, and how ptest packages are gathered to be
installed, adapted to use unicode, and removed a lot of code that wasn't needed
anymore.
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Using RPM deploy dir was causing errors when pre-built images were
used with these steps:
https://wiki.yoctoproject.org/wiki/Quality_Assurance_yocto_project
[YOCTO #11173]
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We currently fetch,configure,build, and install cvs as our test for the
sdk. cvs unfortunately, requires a default editor in order to run. The
change in 94790a8254d6 that checks to see if you have something like vi
installed is fragile since you may have a different default editor. This
patch switches from using cvs as a test to using cpio. cpio also uses
autotools so the functionality tested is equivalent.
Signed-off-by: brian avery <brian.avery@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
All documentation refers to dnf binary as 'dnf' yet make install
does not create one - it's done by Fedora's spec file when building
the rpm. Let's replicate this behavior.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
The idea on getTarget is to use kwargs to send custom variables
to different targets, instead of this, a new variable was added
(just used for custom targets) and this broke testexport. So
in order to fix it, just add the custom variable to kwargs.
This fixes the use of getTarget() in testexport class that was
introduced in 1dc8010afd71fe46fb28bb86fb7c07a5fbd3d7cf.
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This patch implements custom target loading for testimage, currently
missing due to major changes to the test framework.
Custom targets can be defined in various meta-layers, so we
need an extra path information in order to find them.
Any other additional info is retrieved as usual via the variables
TEST_TARGET and TEST_SUITES
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Printing a message which says "configure failed" without the log output
is effectively useless. If a command fails, print the output by default
and simplify the calling code which makes debugging any of these failures
much easier.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Debian based distros has a builtin syslog module so when
try to load tests using unittest it references the builtin
module instead of runtime/cases.
[YOCTO #10964]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
gcc: Removed unneded lines.
multilib: fixed case number.
syslog: added a missing test.
[YOCTO #10964]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
smart test requires to build the image using rpm packages, this check was
included, but it checked for PACKAGE_CLASSES=='package_rpm', and this is
not true when building packages for rpm and deb/ipk. So this would check
IMAGE_PKGTYPE instead.
[YOCTO #10964]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
oeRuntimeTest class is not used anymore as part of runtime
migration, this particular case was missed, so fix it.
[YOCTO #10964]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This adds default values to OERuntimeTestContextExecutor class in
order to make easier the execution of exported test that were
generated with testexport class.
[YOCTO #10686]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
|
|
This allows to use the package install feature with
the new OEQA framework.
[YOCTO #10234]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
|
|
This migrates the smart test from the old framework to
the new one. This has its own commit because smart
test was using bb and oe libraries that are available
when exporting the test cases to run in a different host.
Because of the removal of bb and oe libraries index and
packages feeds creation will be managed in testimage bbclass.
[YOCTO #10234]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
|