Age | Commit message (Collapse) | Author |
|
Various key parts of the core classes (for example, do_package and
do_populate_sysroot) currently require file. As it's not possible to build a
file-native without invoking do_populate_sysroot mark file-native as
ASSUME_PROVIDED and expect to use the host's binary.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This was making deploy tasks MACHINE specific since they place output
into DEPLOY_DIR_IMAGE which contains MACHINE. On the plus side, this
was accidentally ensuring the output was placed for each machine,
on the downside it was triggering a rebuild every time for the different
checksum.
There is a better way to handle this which avoids the rebuild, see
the following tweak to do_deploy to mark it as MACHINE specific
in a different way.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
From Ross:
The http://www.apache.org/dist only keeps latest release, so use
http://archive.apache.org/dist, which keeps all the archives.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Changes to what mirror we happen to fetch from shouldn't cause rebuilds.
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Automatically spawning a devshell, rather than doing so on demand, is
questionable default behavior, and is potentially problematic in headless
builds. Further, there are problems with the patch resolver today. Default to
noop, and the user can always opt-in to use of the patch resolver by setting
PATCHRESOLVE to user.
(From OE-Core rev: 7964936dd1fb202373e58048c19a91d4b27cdfd6)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If our libc doesn't support locales, we don't need gettext nls bits enabled.
(From OE-Core rev: f1bc8afa6ee584a81fb65bcf77e5ae1a8889f47c)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The user's shell shouldn't be allowed to affect the build (and it can break
the flock command and possibly more, if the user's shell isn't POSIX
compliant).
(From OE-Core rev: fc5e1cfcc3ab7acfb6e7e12cb2cf7fa4699ae7b3)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When using OE-Core only we miss this define and its now used in recipes
like os-release, which goes undefined and when booting we see messages
like
Welcome to ${DISTRO_NAME} nodistro.0!
This would change to
Welcome to OpenEmbedded nodistro.0!
Remove all trailing whitespaces while touching this file
(From OE-Core rev: cf2383a63975ac7a51729a313fe0a52b559d2c61)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Pau Espin Pedrol <pau.espin@aweurope.be>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
OLDEST_KERNEL is invalid for aarch64, it didn't exist
back in our current version. Use a more recent version
for aarch64 to allow user mode qemu to work correctly.
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
|
|
As Chris Larson points out in the bug, "BUILD_ARCH changing doesn't change
native/cross sstate checksums, because its calculated in ${@}, so just its
unexpanded form is in the signature. But BUILD_ARCH ends up included in the
sstate filenames, so changes to BUILD_ARCH will result in rebuilds of
native/cross but not rebuilds of the target recipes which depend on
them, which is just what we want."
However it does mean we can't easily test 32 and 64 bit signatures. In order
to make the tests work, we need to add BUILD_ARCH to the HASHBASE whitelist.
BUILD_ARCH is used in the workdir paths and so on so changing it does still
rebuild when we need it to.
With improvements to function dependency tracking, a dependency on SSTATE_PKGARCH
was also introduced causing problems for 32/64 bit build signature equivalence.
Since this is reflected in the sstate filenames, we can safely whitelist this too.
[YOCTO #5970]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Rather than just use d.getVar(X), use the more explict d.getVar(X, False)
since at some point in the future, having the default of expansion would
be nice. This is the first step towards that.
This patch was mostly made using the command:
sed -e 's:\(getVar([^,()]*\)\s*):\1, False):g' -i `grep -ril getVar *`
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use immediate expansion for BUILD_ARCH and BUILD_OS since there is no
point in repeatedly calling os.uname() throughout parsing. This is
worth around 2% of parsing time, small but measurable.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of hard-coding the set of features that can be considered in
COMBINED_FEATURES, simply generate the intersection of DISTRO_FEATURES and
MACHINE_FEATURES.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
PRINC is no longer needed since we have the PR service instead
which people should be using. Drop the PRINC code.
This has been deprecated with a warning and then an error for quite some
time so we can remove it now.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If bluez4 is not explicitly passed as a
distro feature, bluez5 should be used as
the default, so backfill it.
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There is no reason to build sed for the host, however now:
ERROR: Nothing RPROVIDES 'sed-native' (but virtual:native:/OE/sources/openembedded-core/meta/recipes-extended/groff/groff_1.22.2.bb RDEPENDS on or otherwise requires it)
Signed-off-by: Dmitry Eremin-Solenikov <dmitry_eremin@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The past few weeks ftp://ftp.gnu.org has been intermittently giving errors like this:
WARNING: Failed to fetch URL ftp://ftp.gnu.org/gnu/emacs/emacs-23.4.tar.gz;name=tarball, attempting MIRRORS if available
ERROR: Fetcher failure: Fetch command failed with exit code 4, output:
Cannot parse PASV response.
accept: Connection timed out
Cannot parse PASV response.
Error in server response, closing control connection.
Which is annoying because binutils lives there. Using http://ftp.gnu.org hasn't given any problems so far.
Signed-off-by: Koen Kooi <koen.kooi@linaro.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add BBLAYERS_LAYERINDEX_URL variable that bitbake-layers can use to find layer index.
Add BBLAYERS_FETCH_DIR variable that bitbake-layers can use to specify fetch directory.
[YOCTO #5348]
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It turns out that changing WARN_QA and ERROR_QA results in do_configure's QA
postfunc re-executing, so changing a QA test results in a complete rebuild.
This is just too much and the lesser evil of needing to do a full rebuild to
verify changed QA flags is preferable to an enforced full rebuild.
This reverts commit daecfc3438122b5d146a59a5053e57006d55ccc4.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Changing WARN_QA and ERROR_QA should cause do_package_qa to re-execute, so
removing them from the sstate hashes is harmful.
They were added back when sanity testing was part of packaging and this was the
lesser evil, compared to changing sanity tests causing a re-package of
everything.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
In meta/conf/bitbake.conf, PKGDATA_DIR is default to:
PKGDATA_DIR = "${STAGING_DIR_HOST}/pkgdata"
But in meta/conf/multilib.conf, PKGDATA_DIR is set as:
PKGDATA_DIR = "${STAGING_DIR}/${MACHINE}/pkgdata"
When multilib enabled, linux-libc-headers cache will be machine
specific:
$ bitbake-diffsigs sstate-cache/1a/sstate:linux-libc-headers:ppce6500-poky-linux:3.17.7:r0:ppce6500:3:1a0c3934d91479fd7242a5b1d407d155_package.tgz.siginfo sstate-cache/28/sstate:linux-libc-headers:ppce6500-poky-linux:3.17.7:r0:ppce6500:3:28c918e8f9f4a4cfceb3a38b258f7501_package.tgz.siginfo
basehash changed from 8d3158bbddcee612fa30badd05f47b8e to 68ac258fc6c8e489f360fde3123a5894
Variable MACHINE value changed from 'b4420qds' to 'b4860qds'
Signed-off-by: Ting Liu <ting.liu@freescale.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
[YOCTO #7230]
In certain system configurations TRANSLATED_TARGET_ARCH will not
expand in the right order for gcc-cross-candian-mips64n32 to be
generated properly.
This will cause SDKs to fail to generate properly.
Changing the global definition of TRANSLATED_TARGET_ARCH always
expands the ABIEXTENSION, which causes the OVERRIDES to pick it up
as well. This effectively defines a new class of overrides for the 'n32'.
The side effect is that we need to duplicate some mips64 overrides, and
redefine others that were previously 'n32' or 'mips64' exclusive to have
the correct semantics.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
commit 3b3f7e785e279 [kernel: Rearrange for 1.8] began the process of
moving the kernel source and build artefacts out of sstate control and
into a shared location.
This changed triggered some workflow issues, as well as bugs related
to the kernel source containing build output, and hence being dirty and
breaking kernel rebuilds.
To solve these issues, and to make it clear that the kernel is not under
sstate control, we move the source and build outputs to:
work-shared/MACHINE/kernel-source
work-shared/MACHINE/kernel-build-artifacts
Where kernel-build-artifacts is the kernel build output and
kernel-source is kept "pristine". The build-artifacts contain everything
that is required to build external modules against the kernel source,
and includes the defconfig, the kernel-abiversion, System.map files and
output from "make scripts".
External module builds should either pass O= on the command line, or
set KBUILD_OUTPUT to point to the build-artifacts. module-base.bbclass
takes care of setting KBUILD_OUTPUT, so most existing external module
recipes are transparently adapted to the new source/build layout.
recipes that depend on the kernel source must have a depedency on the
do_shared_workdir task:
do_configure[depends] += "virtual/kernel:do_shared_workdir"
With this dependency added, the STAGING_KERNEL_DIR will be populated and
available to the rest of the build.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As the code that uses BB_SIGNATURE_EXCLUDE_FLAGS uses d.getVarFlags() so doesn't
get to see the internal flags, remove _append and _prepend. Also defaultval is
now _defaultval and thus internal, so remove that too.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Recipe packaging for the target requires permissions that are consistent
with meta/files/fs-perms.txt which specifies certain user and group
names. In the early parts of a target build base-passwd is not yet
available to provide the target /etc files used for user/group lookup.
Allow pseudo to fall-back to the last-resort files it installs if the
target ones aren't there yet.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
|
|
Instead of replicating the logic for the host compiler naming from bitbake.conf,
use the BUILD_* variables directly.
Also change BUILD_CPP to use gcc -E (which native.bbclass previously used), as
some recipes (e.g. grub-efi) use ${CPP} with multiple input files, which gcc -E
can handle but cpp can't.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Previously, when building core-image-minimal, the rootfs size would
default to 64M because we use '?=' in bitbake.conf and also '?=' in
core-image-minimal.bb.
The thing is, we'd like to have a default value for all images set
in bitbake.conf but still allow each image recipe to set its own default
value which could be overridden by users in local.conf.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
glibc 2.20+ wont support any older than that
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Might as well move this default to the class which uses it allowing
for easier reading/understanding of the class.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently its near impossible for other classes to sanely override
this value with their own default. By setting a weak default we can
allow other classes to change the default and allow end recipes to
again override this.
As far as I can tell, there shouldn't be any regressions from this
change.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A few native scipts requires bash-native, and we don't build
bash-native, so add it to ASSUME_PROVIDED.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When adding patches or config files from bbappend files, it requires
the use of FILESEXTRAPATHS, which has been an issue and failure point
for people starting to work with bitbake and oe-core.
We add checking to standardize how to use FILESEXTRAPATHS. Only the
format of:
FILESEXTRAPATHS_append := ":${THISDIR}/Your_Files_Path" or
FILESEXTRAPATHS_prepend := "${THISDIR}/Your_Files_Path:"
is acceptable.
[YOCTO #5412]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently, BB_NUMBER_THREADS and PARALLEL_MAKE default to unset and
are set in local.conf. Now that we have the automatic probing,
the default values can be set in bitbake.conf and an example of
explicitly defining how many tasks to run can be moved to
local.conf.sample.extended.
[YOCTO #6217]
Signed-off-by: Roxana Ciobanu <roxana.ciobanu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Check the rootfs size against IMAGE_ROOTFS_MAXSIZE (if set)
* Add comments for IMAGE_ROOTFS_SIZE to not confuse with IMAGE_ROOTFS_MAXSIZE
[YOCTO #2610]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
pkglibexecdir is a fairly common location for package-specific binaries (in
automake this is $libexecdir/$PACKAGE), and binaries in there are already
installed to FILES_PN, so add the corresponding .debug directory to
FILES_PN-dbg.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For most users this commit will have no effect. But if you come across the idea of giving
different names for paths, you'll get some troubles.
When a recipe inherit native, properly define bindir, sbindir, includedir, sysconfdir, datadir
(using xxxdir_native definitions from meta/conf/bitbake.conf).
For example, edit "${BASE_WORKDIR}/${MULTIMACH_TARGET_SYS}/quilt-native/temp/log.do_configure"
and see what are the arguments given by oe_runconf.
Notice that ${docdir}, ${mandir}, ${infodir}, ${localstatedir} have no associated _native definition.
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The QEMU_OPTIONS variables belong in qemu.bbclass so move them there. The
only users of them inherit qemu.bbclass. There is no point in pushing
these into every recipe.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently, qemuppc prints warnings about gdk-pixbuf postinstalls
not working due to illegal instructions. This is due to qemu
running with the wrong cpu type. Add an option for ppc7400 so
that qemuppc works correctly.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To unpack that to more than a single line: -native and -cross recipes are made
to use the dummy Texinfo utilities provided by texinfo-dummy-native if they
invoke those utilities at build time. The target-architecture (cross-compiled)
recipes still use the genuine Texinfo utilites. Right now, they still use
the host system's Texinfo utilities, but could be made to use the
texinfo-native recipe we already ship with some config file changes.
Signed-off-by: Max Eliaser <max.eliaser@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If we don't do this, we see an exception:
ERROR: Failure expanding variable MACHINE_ARCH, expression was ${@[d.getVar('TUNE_PKGARCH', True),
d.getVar('MACHINE', True)][bool(d.getVar('MACHINE', True))].replace('-', '_')} which triggered
exception AttributeError: 'NoneType' object has no attribute 'replace'
Setting a default value avoids this error and allows the sanity checker
to trigger instead.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Set default to http://search.cpan.org/CPAN/, as it should be
Signed-off-by: Tim Orling <TicoTimo@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
* The SRC_URI is not accessible.
So need to add mirror site referred by the original site.
* The problem is that
http://download.savannah.gnu.org/releases redirects to closest mirror
and few mirrors (e.g. .jp) weren't working correctly while
http://download-mirror.savannah.gnu.org/releases/ seems to be reliable.
* Add SAVANNAH_GNU_MIRROR and SAVANNAH_NONGNU_MIRROR variable in bitbake.conf.
* Change the SRC_URI using the new variable.
Signed-off-by: Changhyeok Bae <changhyeok.bae@lge.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows them to co-exist together in the native sysroot, with one
set of cross tools per target architecture.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch adds the bitbake qemu option for the ppc e6500 &
ppc e6500-64b architectures.
Signed-off-by: Valentin Cobelea <valentin.cobelea@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The problem is that do_configure.sigdata depends on STAMPS_DIR because:
do_configure -> STAMPCLEAN -> STAMPS_DIR
this will make the sigdata generated by "STAMPS_DIR=/tmp/stps bitbake -S
recipe" doesn't match the ones in our build dir, but it should. We can
add STAMPS_DIR or STAMPCLEAN to BB_HASHBASE_WHITELIST to fix the
problem, but we can't add STAMPS_DIR since once it is in
BB_HASHBASE_WHITELIST, the "STAMPS_DIR=/tmp/stps bitbake -S recipe"
would not run again.
[YOCTO $6031]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We don't want the value of this varflag itself entering any signatures,
ever.
Part of the fix for [YOCTO #5897].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Drop the -fpermissive C++ compiler flag. We've had this around for years, most
code should have been fixed long ago. Its possible some recipes may fail
however we can (and should) just use the flag where needed.
An OE-Core world build seems to work just fine with this change.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These variables should not influence the config hash, i.e. changing them
shouldn't trigger a reparse of the metadata, so whitelist them.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|