summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2015-06-23init-install: Implement UUID supportEd Bartosh
Used partition UUID in kernel command line to specify root partition. Searched root device by file system uuid in GRUB configuration. Used partition UUID in /etc/fstab to specify swap partition. Used filesystem UUID in /etc/fstab to specify boot partition. [YOCTO #6101] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
2015-06-23init-install: Use GPT table with GRUB 2Ed Bartosh
Changed partition type from 'msdos' to 'gpt'. Added special partition for grub stage2 bootloader. NOTE: This is done only for GRUB 2 as legacy GRUB is rarely used and doesn't support GPT partitions. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
2015-06-23init-install-efi: Implement UUID supportEd Bartosh
Using UUID in favor of device names is more reliable as UUID names are persistent. Device names can change as the order of adding device nodes is arbitrary. This sometimes results in device names switching on each boot, which can cause system fail to boot. Persistent naming solves these issues. Used partition UUID in kernel command line to specify root partition. Used partition UUID in /etc/fstab to specify swap partition. Used filesystem UUID in /etc/fstab to specify boot partition. [YOCTO #6101] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
2015-06-23busybox: Enable UUID-related optionsEd Bartosh
Enabled MOUNT_LABEL and VOLUMEID* features for busybox mount to understand 'UUID=' syntax in fstab. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
2015-06-23initramfs-live-install: Add blkid to initramfsEd Bartosh
Added util-linux-blkid to the list of dependencies of initramfs-live-install and initramfs-live-install-efi. This is a part of the work to support partiion UUID in installer. blkid is going to be used to get partition and filesystem UUIDs. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
2015-06-23image-live: Set syslinux timeout to 5sEd Bartosh
Increased syslinux timeout to 5s as default 1s timeout is not enough to notice syslinux prompt on some devices. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
2015-06-23rt-tests: bump version to v0.92Maxin B. John
Version upgrade to v0.92 Rebased below listed patch to newer source code: added-missing-dependencies.patch Signed-off-by: Maxin B. John <maxin.john@enea.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-06-23babeltrace: Fix invalid pointer free with trace collectionRoy Li
This fixed the bug https://bugs.lttng.org/issues/790 Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-06-23dbus-test: Upgrade 1.8.10 -> 1.8.18Jussi Kukkonen
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
2015-06-23dbus: Upgrade 1.8.16 -> 1.8.18Jussi Kukkonen
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
2015-06-23packagegroup-core-tools-profile.bb: Remove oprofile.Philip Balister
Oprofile functions duplicate perf. Since perf is easier to use drop oprofile from the core-tools-profile package. Also, the oprofile-ui package opens a port on the device. removing this package reduces a possible security issue for devices with profiling tools. Signed-off-by: Philip Balister <philip@balister.org> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-06-23packagegroup-core-sdk.bb: Drop distcc from the core-sdk.Philip Balister
distcc has been used in the past to speed up native compile across several machines. This is less an issue on modern embedded systems. Also, improvements in sdk generation have reduced the need for on target compile of large projects. Since the distcc packages start a daemon at boot, drop it from the packagegroup to avoid having some slight runtime impact on systems installing an sdk. Signed-off-by: Philip Balister <philip@balister.org> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-06-23runqemu-internal: set mutual exclusiveness for serial and nographic optionsJagadeesh Krishnanjanappa
Use "-nographic" option only if "serial" option is not specified. Otherwise we get below error when 'runqemu <kernel_image> <rootfs_image> serial' is executed, (snip) QEMU 2.2.0 monitor - type 'help' for more information (qemu) qemu-system-aarch64: -serial stdio: cannot use stdio by multiple character devices -- CUT -- Signed-off-by: Jagadeesh Krishnanjanappa <jkrishnanjanappa@mvista.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-06-23runqemu-script: define console for qemuarm NFS bootingJagadeesh Krishnanjanappa
Add console=ttyAMA0,115200 as one of the boot parameters for qemuarm, in order to print bootlog messages on the console. Signed-off-by: Jagadeesh Krishnanjanappa <jkrishnanjanappa@mvista.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-06-23runqemu-internal: add support to boot arm64 qemu target via NFSJagadeesh Krishnanjanappa
Add required boot parameters inorder to boot arm64 qemu target via NFS Signed-off-by: Jagadeesh Krishnanjanappa <jkrishnanjanappa@mvista.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-06-23runqemu: fix MACHINE being detected as qemuarm for qemuarm64 kernel imageJagadeesh Krishnanjanappa
Basically, runqemu script autodetects MACHINE type based on the kernel image name; if MACHINE name is not specified. Since 'qemuarm' string is common in both qemuarm amnd qemuarm64 kernel image names, the MACHINE type is considered as 'qemuarm' even when qemuarm64 kernel image name is given in command line. Signed-off-by: Jagadeesh Krishnanjanappa <jkrishnanjanappa@mvista.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-06-23qt4-4.8.7: restore arm64 patches which are dropped by mistakeKai Kang
During upgrade qt4 from 4.8.6 to 4.8.7, four arm64 patches are removed. But three of them are dropped by mistake that they are not merged by upstream and still needed. Restore them. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-06-23cups: upgrade from 2.0.2 to 2.0.3Kai Kang
Upgrade cups from 2.0.2 to 2.0.3. In its release log, it fixes CERT VU #810572/CVE-2015-1158/CVE-2015-1159. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-06-23openssl: fix building on x32 systemsCristian Iorga
Fix build on Fedora 21 i686. When building on x32 systems where the default type is 32bit, make sure that 64bit integers can be represented transparently. Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-06-23Revert "distrodata: Remove unnecessary include of package_regex.inc"Ross Burton
Instead of asking the user to include a number of configuration files, the class can do this. Next step is to fix the documentation. This reverts commit 2a4ee94667d4d356cad2ca6d60a100a30c92737b. Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-06-23lttng-modules: drop makefile patchNathan Lynch
The lttng-modules Makefile allows us to specify the kernel we're building against via the KERNELDIR variable on the build command line. Use that and drop the patch (which tends to need updating whenever the upstream Makefile changes). Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-06-23insane.bbclass: fix false negative in build-deps QA checkPatrick Ohly
When a recipe called 'foobar-test' links against 'foobar' without listing that in DEPENDS, the build-deps check misses that error because it looks for 'foobar' in a package string containing (among others) the 'foobar-test' name, leading to the incorrect conclusion that the package is listed as dependency. The 'packages' string needs to be split into individual package names before the check. Doing that once directly after reading the value is more efficient than splitting inside package_qa_check_rdepends() because the caller also needs the individual components. Also use a set to speed up the 'package in packages' check. Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-06-23copyleft_filter.bbclass: Allow to filter on nameMariano Lopez
The archiver uses a license based filter to provide the source code. This patch allows to search on name based on two new variables (COPYLEFT_PN_INCLUDE, COPYLEFT_PN_EXCLUDE). Both variables are empty by default. The filter by name has higher priority than the license filter. [YOCTO # 6929] Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-06-23gtk+: Upgrade 2.24.27 -> 2.24.28Jussi Kukkonen
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-06-23base.class: warn for invalid PACKAGECONFIGRobert Yang
There may be typos or out of date values in PACKAGECONFIG, check and warn them. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-06-23libpcap: add a dummy PACKAGECONFIG for bluez5Robert Yang
The BLUEZ is default to bluez5, but there is only PACKAGECONFIG[bluez4], no PACKAGECONFIG[bluez5], add a dummy PACKAGECONFIG for bluez5 to avoid confusing the user, and avoid the warning. Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2015-06-23bluez5: remove alsa from PACKAGECONFIGRobert Yang
The PACKAGECONFIG[alsa] had been removed when upgraded to 5.12 since it was not supported any more. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-06-23libsdl2: PACKAGECONFIGizeAndreas Müller
* DEPENDS + EXTRA_OECONF -> PACKAGECONFIG for directfb / opengl / x11 * added PACKAGECONFIG for gles2 / pulseaudio / tslib / wayland Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-06-23neon: fix compat issues with gnutls 4.3Armin Kuster
Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-06-23logging.bbclass: avoid bashism in bbdebug()Patrick Ohly
Checking the bbdebug() debug level parameter with a regular test expression only works in bash. Using tr to filter out digits and then checking whether anything is left achieves the same result and is more portable. Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-06-23distutils: regenerate pyc files after being modified by sedAlejandro Hernandez
py files are edited by sed and therefore *.pyc files are recreated on first boot, but if you have a read-only filesystem this is not possible. This patch creates pyc files directly after the py files are modified. [YOCTO #7722] Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com> Signed-off-by: Thomas Roos <roosesweb@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-06-23security_flags.inc: remove duplicated over-ridesAndre McCurdy
The following over-rides were both defined twice: SECURITY_CFLAGS_pn-grub-efi-x86-64-native SECURITY_CFLAGS_pn-ltp Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-06-18libxml2: Security Advisory - libxml2 - CVE-2015-1819Yue Tao
for CVE-2015-1819 Enforce the reader to run in constant memory Signed-off-by: Yue Tao <Yue.Tao@windriver.com> Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-06-18piglit: Add missing inclusion of Xutil.hOtavio Salvador
The EGL tests rely on Xutil.h being included. Some EGL implementation does not explitly include it by default and than the build fail. This fixes the build in imx53qsb board, of meta-fsl-arm, but is a generic fix. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-06-18tzdata: update to 2015eArmin Kuster
merged inc back into recipe. Changes affecting future time stamps Morocco will suspend DST from 2015-06-14 03:00 through 2015-07-19 02:00, not 06-13 and 07-18 as we had guessed. (Thanks to Milamber.) Assume Cayman Islands will observe DST starting next year, using US rules. Although it isn't guaranteed, it is the most likely. Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-06-18tzcode-native: update to 2015eArmin Kuster
merged inc back into recipe. Changes affecting code When displaying data, tzselect converts it to the current locale's encoding if the iconv command works. (Problem reported by random832.) tzselect no longer mishandles Dominica, fixing a bug introduced in Release 2014f. (Problem reported by Owen Leibman.) zic -l no longer fails when compiled with -DTZDEFAULT=\"/etc/localtime\". This fixes a bug introduced in Release 2014f. (Problem reported by Leonardo Chiquitto.) Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-06-18devtool: deploy: fix preservation of symlinks and permissions/ownershipPaul Eggleton
It turns out that scp can't be used to copy symlinks because it follows them instead of copying them, and this is by design (since it emulates rcp which also behaved this way); the unfortunate result is that symlinks that point to valid files on the host translate into the host file being copied to the target (yuck). The simplest alternative that does not have this undesirable behaviour is to use tar and pipe it over ssh. At the same time, it would be even better if we properly reflect file permissions and ownership on the target that have been established within the pseudo environment. We can do this by executing the copy process under pseudo, which turns out to be quite easy with access to the pseudo environment set up by the build system. Fixes [YOCTO #7868]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
2015-06-18lib/oeqa/utils/commands: ensure get_bb_var() works when value contains =Paul Eggleton
Only split on the first equals character so that values that contain equals characters (such as FAKEROOTENV) can be retrieved. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
2015-06-18classes/externalsrc: handle tasks with existing lockfilesPaul Eggleton
We need to ensure we add a leading space to the value we are prepending here in case lockfiles already has a value. Fixes [YOCTO #7813]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
2015-06-18recipetool: appendfile: fix file command error handlingPaul Eggleton
* It turns out that not all versions of the file command support the -E option - the version in Ubuntu 14.04 doesn't support it for example. This option is supposed to force file to return an error if the file can't be opened - since we can't rely upon it then fall back to looking at the output instead. (The results of this issue were simply that we didn't notice if the file was executable and give a warning, which tripped an oe-selftest failure - so it was minor.) * If we receive an error there's not much point looking at the output to see what type was returned because there wasn't one. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
2015-06-18recipetool: appendfile: clarify help textPaul Eggleton
Add a long description and tweak some of the argument descriptions so that it's clearer what the appendfile subcommand does and how it works. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
2015-06-18devtool: use DevtoolError for error handlingMarkus Lehtonen
Use DevtoolError exception more widely for handling error cases. This exception is now caught in the main script and raising it can be used to exit with an error. This hopefully simplifies error handling. The change also makes exit codes more consistent, always returning '1' when an error occurs. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
2015-06-18devtool: remove some unused return valuesMarkus Lehtonen
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
2015-06-18devtool: split out 'patch' update mode into a separate functionMarkus Lehtonen
Continue refactoring of update_recipe() by splitting out the 'patch' mode into a separate function. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
2015-06-18devtool: split out 'srcrev' update mode into a separate functionMarkus Lehtonen
Refactor update_recipe() (i.e. the implementation of the update-recipe command) by splitting out the 'srcrev' into a distinct function. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
2015-06-18devtool: slight simplification of path splitting logicMarkus Lehtonen
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
2015-06-18devtool: simplify few conditionals a bitMarkus Lehtonen
Just refactor the code. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
2015-06-18devtool: simplify the logic of determining patches to be removedMarkus Lehtonen
A slight simplification of the code. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
2015-06-18devtool: update-recipe: do rev parsing in a separate functionMarkus Lehtonen
Split out the logic of determining "initial rev" and "update rev" into a separate function. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
2015-06-18devtool: refactor bb task execution into a separate classMarkus Lehtonen
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-20 08:51:06 +0000