| Age | Commit message (Collapse) | Author |
|---|
|
In entire meta/classes/ directory, replace shell tests of the form
"if test -? ..." with POSIX tests of the form "if [ -? ...
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Partition UUID for msdos partitioning is based on a 4 bytes long
system identifier. Wic uses random number to generate system
identifier. For the numbers starting with 0 partition uuid is
shorter, which makes wic images non-bootable as kernel expects
8 charactest in PARTUUID parameter.
Padded system identifier with '0' when generating partition UUID
to make it always 8 characters long. This should fix the boot
issue.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For aesthetic style reasons, use "grep -q" instead of ">/dev/null".
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
mdadm only works with corosync 2.x which provides header file corosync/cmap.h.
If build mdadm with corosync 1.x, it fails with:
| member.c:12:27: fatal error: corosync/cmap.h: No such file or directory
| #include <corosync/cmap.h>
| ^
Build with corosync only header file corosync/cmap.h exists.
Ref:
https://github.com/neilbrown/mdadm/blob/master/mdadm.h#L63
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
roofs -> rootfs
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
roofs -> rootfs.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When performing a file system check, the image created with mkfs will
trigger Pass 3A ('Optimizing directories') which turns the file system
into state "changed" (EXT2_FLAG_CHANGED).
This will let fsck request a reboot by setting the return code flag "2".
The result of this is that each ext-image built with oe-core will
trigger a reboot during the first time an fsck is triggered.
A common case where this might occur is when fsck detects having
a future superblock write time. This always happens when booting a
newly created ext4 rootfs with a target that does not have a recent time
set.
This patch moves the initial fsck run that performs the optimization
from the target to the host system and thus prevents the target from
performing an avoidable reboot.
Signed-off-by: Enrico Jorns <ejo@pengutronix.de>
Signed-off-by: Ulrich Ölmann <uol@pengutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Limit the length of error logs to 40 lines. We don't need to
show/archive thousands of lines of bitbake logs if an error occurs.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make it possible to limit the length of output lines shown in runCmd
exceptions. E.g when running bitbake we easily get thousands of lines of
log output, where only the last few (tens) are interesting or relevant
when an error occurs.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In order to dramatically reduce the data footprint of the result
branches. This makes cloning/pulling result repositories a lot faster.
Buildstats can still be accessed, when needed by doing
git fetch refs/notes/buildstats/*:refs/notes/buildstats/*
[YOCTO #10582]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Option for adding git-notes to the commit.
[YOCTO #10582]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
May be used for excluding certain files from the commit.
[YOCTO #10582]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Git arguments were badly laid out.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of separate rusage and child rusage values, only store their sum
value in buildstats. This is a big reduction in data footprint without
really losing any interesting data.
Also, utilize OrderedDict to order data more logically.
[YOCTO #10582]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Write out all buildstats into one big json file, instead of using
multiple per-measurement files. Individual buildstats will be indexed
using "<test_name>.<measurement_name>" as the key. Also, changes the
per-testcase working directories into temporary directories that will be
removed after test execution as there are no more per-testcase data files
to store permanently.
[YOCTO #10582]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
do_diffs in the vg_regtest script compares the actual test output
against the expected test output and returns 0 if it matches.
Previous upgrade modified the return value of do_diffs() and that
resulted in ptest failures.
[YOCTO #8471]
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
@PERL@ in vg_regtest.in causes recipe specific sysroot based perl to
be present in the vg_regtest script, making it unusable in the target.
Use /usr/bin/perl instead of @PERL@ to fix it.
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Re-order some assignments to be logically arranged.
Remove the set -ex statements as they serve no purpose.
Pass --debug-configuration to see what configuration steps boost is taking.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As Python 3 is the default Python version, change Boost to build against Python
3 instead of Python 2 if enabled. It's not simple to support both, so this
means that support for building boost-python against Python 2 has been removed.
This involves backporting a number of patches upstream to fix Python 3 support,
and telling Boost precisely where to find the Python headers and libraries so
that it doesn't try to invoke the host Python to determine these values.
[ YOCTO #11104 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Briefly: Haiti has resumed DST.
Changes to past and future time stamps
Haiti resumed observance of DST in 2017. (Thanks to Steffen Thorsen.)
Changes to past time stamps
Liberia changed from -004430 to +00 on 1972-01-07, not 1972-05-01.
Use "MMT" to abbreviate Liberia's time zone before 1972, as "-004430"
is one byte over the POSIX limit. (Problem reported by Derick Rethans.)
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The bb.note prints multiple same lines when invoke this class again, but
if we set mainlogger.propagate = False, nothing would be printed,
according to logging's document:
https://docs.python.org/3/library/logging.html
Note
If you attach a handler to a logger and one or more of its ancestors, it
may emit the same record multiple times. In general, you should not need
to attach a handler to more than one logger - if you just attach it to
the appropriate logger which is highest in the logger hierarchy, then it
will see all events logged by all descendant loggers, provided that
their propagate setting is left set to True. A common scenario is to
attach handlers only to the root logger, and to let propagation take
care of the rest.
We may need avoid using bb.note or bb.warn in oeqa since it attaches
multiple log handlers which may cause confusions
This patch only sets "mainlogger.propagate = False" in
selftest/runqemu.py and use logger.info to replace bb.note in
targetcontrol.py to minimize the impact.
[YOCTO #10249]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Usage:
$ oe-selftest -r runqemu
Current test cases:
$ runqemu nographic qemux86-64
$ runqemu nographic qemux86-64 ext4
$ runqemu nographic qemux86-64 iso
$ runqemu nographic core-image-minimal
$ runqemu nographic core-image-minimal vmdk
$ runqemu nographic core-image-minimal vdi
$ runqemu nographic tmp/deploy/images/qemux86-64
$ runqemu nographic tmp/deploy/images/qemux86-64 hddimg
$ runqemu nographic qemux86-64 slirp
$ runqemu nographic qemux86-64 slirp qcow2
$ runqemu nographic tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.qemuboot.conf
$ runqemu nographic tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.ext4
Need more later:
- Test initramfs
- Test nfs
- Test when set DEPLOY_DIR_IMAGE and OECORE_NATIVE_SYSROOT
- And others which similate runqemu runs on SDK and eSDK.
[YOCTO #10249]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The launch() doesn't need runqemuparams, we need handle it in start().
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Modify the following files to test runqemu:
targetcontrol.py
utils/commands.py
utils/qemurunner.py
We need simulate how "runqemu" works in command line, so when test
"runqemu", the targetcontrol.py, utils/commands.py and
utils/qemurunner.py don't have to find the rootfs or set env vars.
[YOCTO #10249]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some commands might need to run longer than the default timeout of
five seconds. If that occurred, run_serial() returned with a status
code of zero (sic!) and no other indication of what went wrong.
Now the timeout is configurable (with five still the default) and
an explicit warning ("<<< run_serial(): command timed out after 5 seconds without output >>>")
gets appended at the end of the data returned to the caller.
While at it, the logic for checking for the timeout was updated a bit
because both implementations could overshoot the timeout when entering
select() right before the final deadline.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a PACKAGECONFIG option to allow the user to disable the mouse
cursor/pointer in the X server. This might be useful where a
touchscreen is used.
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed test failure caused by using bootimg_dir path
instead of kernel_dir to find systemd-efi bootloader:
FAIL: test_systemd_bootdisk (oeqa.selftest.wic.Wic)
...
FileNotFoundError: [Errno 2] No such file or directory:
'tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/recipe-sysroot/usr/share'
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently, if something is added to a sysroot, its hash remains unchanged,
and it continues to be buildable, it doesn't get removed from the sysroot.
This patch handles the case where something is removed from DEPENDS or
[depends].
It does introduce its own issue where something could get removed even
though some other task in parallel may have the same requirement. This
case should be extrememly rare and fixing the more common DEPENDS removal
is likely the bigger win though.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Changed were made to the code but not reflected in vardepsexclude, fix this.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The original description for this was:
"""
Since we clean out do_populate_sysroot if do_configure runs, don't
allow do_populate_sysroot_setscene functions if we're going to
run do_configure.
"""
With RSS, we don't need to clean do_populate_sysroot any more. Since
we no longer do that, this function also has no purpose any longer
and can also be removed.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With recipe specific sysroots its now pointless to do this, may as well
save the cpu cycles.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
BB_SETSCENE_VERIFY_FUNCTION2 replaced BB_SETSCENE_VERIFY_FUNCTION
and due to our minimum bitbake requirements there is no point in
retaining the older version any more.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make use of lnr/ln -r while creating relative symlinks than guessing the
relalive path.
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
/bin, /sbin, /lib are replaced with ${base_bindir}, ${base_sbindir} and
${base_libdir}.
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fix the path in example so that '/usr/bin/tunctl' could be found under
this path.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Rename local function to avoid conflicts with compiler intrinsics
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Try to avoid native recipes accidentally being dependent on
MACHINE_FEATURES. This simple change doesn't prevent MACHINE_FEATURES
set via MACHINE_FEATURES_BACKFILL sneaking through, but it's better
than nothing.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Update the list of available IMAGE_FEATURES with the sub-features of
'debug-tweaks' and add 'splash'.
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Replace hardcoded '/lib' in kernel firmware installation path with
${nonarch_base_libdir}.
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #9542]
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* respect it for incremental rootfs generation
* add lists_dir option to opkg.conf
* also fix setting info_dir and status_file when they use default value, the
problem is that self.opkg_dir is already prefixed with rootfs directory,
comparing it with /var/lib/opkg always returned false and the options were
appended to config file unnecessary
* with opkg 0.3.4 we can use VARDIR prefix added in:
commit d2a8e23dc669adc398f4bb8bcfcabfcf925708f7
Author: Florin Gherendi <floring2502@gmail.com>
Date: Mon Dec 19 12:25:38 2016 +0200
libopkg: make the /var and /etc directories configurable at compile time.
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* when OPKGLIBDIR doesn't have the default /var/lib value it will
silently fail to copy package database from normal rootfs to debugfs
rootfs and then when trying to install *-dbg complimentary packages
it won't install anything, because installed_pkgs.txt file generated
from debugfs is empty
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The windres binutils binary which is used for Windows resource files
requires utf-16 and cp1252 encoding support in order to correctly
generate resource files with strings. As such when using uninative to
build mingw resources for a nativesdk target the windres binary is
executed on the native host, thus using the uninative libc and gconv
modules.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
rpm 5.x was packaging build tools separately, so we need to unbreak
things that relied on that.
[YOCTO #11167]
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is entirely unnecessary (we can ask the signer backend to export the
key to a file when needed), and was causing confusing selftest failures
due to the variable being set from two different places.
[YOCTO #11191]
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Using RPM deploy dir was causing errors when pre-built images were
used with these steps:
https://wiki.yoctoproject.org/wiki/Quality_Assurance_yocto_project
[YOCTO #11173]
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This test case builds wic image using rawcopy plugin
running wic directly.
[YOCTO #10618]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed long lines, indentation and one unused variable.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Robert P. J. Day
Ed Bartosh
Kai Kang
Robert Yang
Enrico Jorns
Markus Lehtonen
Maxin B. John
Ross Burton
Armin Kuster
Chen Qi
Patrick Ohly
Trevor Woerner
Richard Purdie
Amarnath Valluri
Khem Raj
Andre McCurdy
Alexander Kanavin
Martin Jansa
Nathan Rossi