aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2016-01-11sstatesig: Handle special case of gcc-source shared-workdir for printdiffRichard Purdie
Often, bitbake -S printdiff would show that there was a checksum not found which would turn out to be from gcc-source. This is due to it being a shared-workdir recipe. For now, hardcode the special case into the sstatesig code to stop people (including me) puzzling over this. If/as/when we add any other shared workdir recipes, we'll need to rethink this. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-01-11bitbake.conf: add virtual/libiconv-native to ASSUME_PROVIDEDRoss Burton
It's possible for a native recipe to have virtual/libiconv-native as a build dependency, but as we expect that the host provides that add it to ASSUME_PROVIDED. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-01-11devtool: build: support using BBCLASSEXTENDed namesPaul Eggleton
It's logical that you would want to build BBCLASSEXTENDed items separately through devtool build, so simply allow that - we're just passing the name verbatim to bitbake, so all it means is adjusting the validation. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-01-11devtool: reset: support recipes with BBCLASSEXTENDPaul Eggleton
If the recipe file itself was created in the workspace, and it uses BBCLASSEXTEND (e.g. through devtool add --also-native), then we need to clean the other variants as well. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-01-11devtool: refactor code for getting local recipe filePaul Eggleton
We're doing this in a couple of places, let's just find the recipe file if it exists within the workspace (which it will if it's been added through "devtool add") when we read in the workspace. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-01-11devtool: add: support adding a native variantPaul Eggleton
Sometimes you need to build a variant of a recipe for the build host as well as for the target (i.e. BBCLASSEXTEND = "native"); add a --also-native command line option to "recipetool create" that enables this and plumb it through from an identical option for "devtool add". (We could conceivably do the same for nativesdk, but I felt it might be confusing within the context of the extensible SDK, where nativesdk isn't really relevant to the user.) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-01-11devtool: reset: do clean for multiple recipes at once with -aPaul Eggleton
We need to run the clean for all recipes that are being reset before we start deleting things from the workspace; if we don't, recipes providing dependencies may be missing when we come to clean a recipe later (since we don't and couldn't practically reset them in dependency order). This also improves performance since we have the startup startup time for the clean just once rather than for every recipe. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-01-11recipetool: create: support creating standalone native/nativesdk recipesPaul Eggleton
If the recipe name ends with -native then we should inherit native; likewise if it starts with nativesdk- then inherit nativesdk. (Note that the recipe name must actually be specified by the user in order to trigger this - we won't do it based on any name auto-detected from e.g. the tarball name.) Since we're doing this based on the name, "devtool add" will also gain this functionality automatically. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-01-11recipetool: create: lower case name when determining from filenamePaul Eggleton
As a matter of general convention we expect recipe names to be lower case; in fact some of the packaging backends insist upon it. Since in this part of the code we're auto-determining the name, we should convert the name to lowercase if it's not already so that we're following convention and avoiding any validation issues later on. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-01-11devtool: sdk-update: add option to skip preparation stepPaul Eggleton
For debugging purposes it's useful to be able to skip the preparation step so you can inspect what the state of the build system is first. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-01-11devtool: sdk-update: fix error checkingPaul Eggleton
Running "raise" with no arguments here is invalid, we're not in exception handling context. Rather than also adding code to catch the exception I just moved the check out to the parent function from which we can just exit. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-01-11devtool: sdk-update: fix metadata update stepPaul Eggleton
* Clone the correct path - we need .git on the end * Pull from the specified path instead of expecting a remote to be set * up in the repo already (it isn't by default) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-01-11devtool: sdk-update: fix not using updateserver config file optionPaul Eggleton
We read the updateserver setting from the config file but we never actually used that value - the code then went on to use only the value supplied on the command line. Fix courtesy of Dmitry Rozhkov <dmitry.rozhkov@intel.com> Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-01-11classes/populate_sdk_ext: disable signature warningsPaul Eggleton
The user of the extensible SDK doesn't need to see these. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-01-11classes/populate_sdk_ext: fix cascading from preparation failurePaul Eggleton
During extensible SDK installtion, if the build system preparation step fails we try to put something at the end of the environment setup script to show an error when it is sourced, in case the user doesn't realise that the partially-installed SDK is broken. However, an apostrophe in the message (actually a single quote) appears to terminate the string and therefore breaks the command. Drop it to avoid that. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-01-11scripts/oe-publish-sdk: add missing call to git update-server-infoPaul Eggleton
We need to call git update-server-info here on the created repository or we can't share it over plain http as we need to be able to for the update process to function as currently implemented. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-01-11libbsd: upgrade to 0.8.1Martin Jansa
* fixes building lldpd from meta-networking, more information in: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=807730 http://cgit.freedesktop.org/libbsd/commit/?id=48ac79b1883981f5135b5b9c76ca268e6cbe65b2 * update LIC_FILES_CHKSUM and LICENSE according to: http://cgit.freedesktop.org/libbsd/commit/?id=6bcb1312f4691b92d0193e4a923a776dc6f233df http://cgit.freedesktop.org/libbsd/commit/?id=290a1ce8f262a7f30a77c0a89eaa28876de876ed be aware that it doesn't list all LICENSEs, only those where common license text already exists (feel free to add additional texts). Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-01-07image: Really remove lockfiles flagRichard Purdie
This was supposed to be removed by a previous patch but was readded. Really remove it. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-01-07boost: ensure boost to remain an empty metapackageLukas Bulwahn
To ensure that boost remains an empty metapackage after version updates, we explicitly require boost files to be empty. If new libraries exist after a version update of the boost recipe, bitbake will emit a warning at the do_package task. For example, at the version update from 1.58.0 to 1.59.0, the new timer library is indicated with: WARNING: QA Issue: boost: Files/directories were installed but not shipped in any package: /usr/lib/libboost_timer.so.1.59.0 Please set FILES such that these items are packaged. Alternatively if they are unneeded, avoid installing them or delete them within do_install. boost: 1 installed and not shipped files. [installed-vs-shipped] Ross Burton suggested this improvement on the openembedded-core mailing list during review of the boost recipe version update [1]. [1] http://lists.openembedded.org/pipermail/openembedded-core/2015-December/114314.html Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-07image_types.bbclass: Rebuild when WICVARS changeMariano Lopez
The procces to do a wic image is to save a file with variables required by wic and then call wic using this file. Because this is external to bitbake if the vars change, the image won't be rebuild; an example of such is IMAGE_BOOT_FILES. This patch adds these variables to vardeps of do_rootfs when a wic image is build. This will rebuild the image if a variable needed by wic changes. [YOCTO #8693] Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-07gccmakedep: fix buildpaths qa checkKai Kang
When enable "buildpaths" QA check, it fails to build gccmakedep: | ERROR: QA Issue: File | work/mips64-poky-linux/gccmakedep/1_1.0.3-r3/packages-split/gccmakedep/usr/bin/gccmakedep | in package contained reference to tmpdir [buildpaths] Remove build related path to fix this issue. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-07bash: fix buildpaths qa check errorKai Kang
Script bashbug and Makefile for ptest contain build related paths which cause fail to pass buldpaths QA check. Remove such paths from these 2 files. Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-07testimage: remove VNC test, x11vnc isn't in oe-core anymoreRoss Burton
Now that x11vnc won't be in Sato images we don't want to test it. Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-07x11vnc: remove all references to moved packageIoan-Adrian Ratiu
Together with the move to meta-oe, all references to x11vnc should be removed from oe-core. There are three of these: a distro alias, a packagegroup rdepends and a runtime test. Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-07x11vnc: move recipe to meta-oeIoan-Adrian Ratiu
x11vnc can be configured with --use-system-libvncserver to use an external libvncserver which will be added to meta-oe. Since oe-core should not depend on meta-oe, we move x11vnc there. Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-07classes/buildhistory: actually use KiB in extensible SDK sizes filesPaul Eggleton
I was using bytes here for the sizes and writing out KiB as the suffix. Change it to actually write out size values in KiB. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-07x11vnc: move recipe to meta-oeIoan-Adrian Ratiu
x11vnc can be configured with --use-system-libvncserver to use an external libvncserver which will be added to meta-oe. Since oe-core should not depend on meta-oe, we move x11vnc there. Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-07readline: move inputrc into readlineJoseph A. Lutz
inputrc is the global configuration file for the readline library. Signed-off-by: Joseph A. Lutz <joseph.lutz@novatechweb.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-07tune-*: use mcpu instead of mtune for ARM tunesMartin Jansa
* since: commit cffda9a821a3b83a8529d643c567859e091c6846 Author: Martin Jansa <Martin.Jansa@gmail.com> Date: Tue Sep 11 17:05:45 2012 +0000 arch-arm: define different ARMPKGARCH when different CCARGS are used we don't need to worry about e.g. cortexa7 device upgrading binary package from armv7a feed which would be built with -mcpu=cortexa15, so we can use -mcpu instead of -mtune, because we won't share the binary feed with MACHINEs built with different tune. Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-07arch-armv7ve: add tune include for armv7ve and use it from cortexa7 and ↵Martin Jansa
cortexa15 * be aware that this -march value is available only in gcc-4.9 and newer: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=57907 * -mcpu=cortex15 and -mcpu=cortexa7 conflict with -march=armv7a We either have to stop putting -march in default CCARGS or at least set it compatible one like this patch does. Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-07cortexa{7,15,17}: add VFPv4 tunesMartin Jansa
* it was added only to hf cortexa7 in: commit e97d152ca13556b41a236c1a4cfb11e77ff857d7 Author: Kristof Robot <krirobo@gmail.com> Date: Sun Jan 26 10:03:56 2014 +0100 Add Cortex A7 support for NEONv2 & FPv4 * add it to softfp cortexa7 and both versions for cortexa15 and cortexa17 tunes Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-07feature-arm-vfp.inc: Further simplify with TUNE_CCARGS_MFLOATMartin Jansa
* add TUNE_CCARGS_MFLOAT variable which is used to set -mfloat-abi parameter as well as ARMPKGSFX_EABI suffix in TUNE_PKGARCH and TARGET_FPU * TARGET_FPU was using ARMPKGSFX_FPU, but in most cases we use it only to distinguish between hard and soft abi, not various -mfpu variants which can appear in ARMPKGSFX_FPU Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-07feature-arm-{neon,vfp}.inc: refactor and fix issuesMartin Jansa
* respect all 4 vfp options ('vfp', 'vfpv3d16', 'vfpv3', 'vfpv4') when setting -mfloat-abi and ARMPKGSFX_EABI, without this change it wasn't possible to use call-convention hard together with vfpv4 * move 'vfpv3d16', 'vfpv3', 'vfpv4' support from feature-arm-vfp.inc to feature-arm-neon.inc the main difference is that feature-arm-vfp.inc is included in arch-armv5.inc while feature-arm-neon.inc only in armv7*.inc, so these options should be added to TUNEVALID also only for armv7* MACHINEs. * support vfpv4 with or without neon when both vfpv4 and neon are in TUNE_FEATURES we want to set only one -mfpu parameter and to neon-vfpv4 * prevent multiple appends to ARMPKGSFX_FPU, we don't want to include e.g. -vfp as well as -vfpv4 when both "vfp" and "vfpv4" are in TUNE_FEATURES * add -mfpu=vfp for tunes with "vfp" in TUNE_FEATURES - before that we were only adding -vfp to ARMPKGSFX_FPU * add TUNE_CCARGS_MFPU variable which is used to set -mfpu parameter as well as ARMPKGSFX_FPU suffix in TUNE_PKGARCH, all enabled values are appended to it based on TUNE_FEATURES and then the last one is used in the actual param and suffix * this prevents multiple -mfpu options in TUNE_CCARGS * !!! This means we need to change TUNE_PKGARCH and PACKAGE_EXTRA_ARCHS for vfpv4, vfpv3d16, vfpv3 tunes, because the -vfp* isn't prependend multiple times. If you're using one of these new DEFAULTTUNES (which were at least partially broken anyway) and depend on working binary package feed upgrade-path, then don't forget to migrate PR service database to new TUNE_PKGARCH. Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-07arch-armv7a.inc: add vfpv4 support also to softfp and big endiand tunesMartin Jansa
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-07arch-armv7a.inc: Fix PACKAGE_EXTRA_ARCHS for tune-armv7atb-vfpv3, ↵Martin Jansa
tune-armv7atb-vfpv3d16, cortexa7thf-neon-vfpv4 Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-07arch-armv5.inc: drop duplicate ARMPKGSFX_DSP and ↵Martin Jansa
PACKAGE_EXTRA_ARCHS_tune-armv5tehf-vfp * both belong and already are in arch-armv5-dsp.inc Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-07arch-armv[456]*.inc: improve indentation like armv7aMartin Jansa
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-07arm/arch-arm*, tune-cortexa*, tune-thunderx.inc, ↵Martin Jansa
powerpac/arch-powerpc64.inc: Use normal assignment * some tunes were using weak assignment for TUNE_FEATURES, unify all tunes to use normal assignment so it behaves consistently Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-07arch-armv7a, tune-cortexa*: improve indentationMartin Jansa
* indent the assignments, so that it's easier to see the algoritm how these values are modified and do less errors, see fixes in next commit Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-07arch-armv7a, tune-cortexa*: improve comment VFP -> HFMartin Jansa
* the section bellow the comment adds only HF variants, VFP is already mixed in the softfp sections above (unlike armv5, armv6 tune files where it really was above VFP/DSP section) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-07arch-armv7a: add missing space before ?=Martin Jansa
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-07tune-cortexr4.inc: fix PACKAGE_EXTRA_ARCHSMartin Jansa
* PACKAGE_ARCHS were missing TUNE_PKGARCH armv7rt2-vfp because thumb is enabled in TUNE_FEATURES Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-07sanity.bbclass: add more information to error message about TUNE_PKGARCH ↵Martin Jansa
missing in PACKAGE_ARCHS * sometimes it's hard to see what's wrong here * error message: Error, the PACKAGE_ARCHS variable does not contain TUNE_PKGARCH (cortexa7t2hfhf-vfp-vfpv4-neon). doesn't help much to understand what exactly went wrong and where Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-07mkefidisk.sh: add boot log on consoleTrevor Woerner
Hooking up a serial console is a "developer mode", the chances are pretty good developers are interested in watching the kernel boot log on the console so they can spot any problems or diagnose any failed boots (e.g. can't find root fs). Signed-off-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-07mkefidisk.sh: add startup script for automated bootTrevor Woerner
Regardless of which image is built using which layers, try to ensure the image on the SD device being prepared is the one that is booted automatically when the board is powered. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-07oeqa/selftest/recipetool: update for libjpeg-turbo migrationRoss Burton
The recipe creation test of libmatchbox now depends on libjpeg-turbo, not jpeg. Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-07libjpeg: Replace libjpeg with libjpeg-turboMaxin B. John
Moving libjpeg-turbo from meta-oe as a replacement for libjpeg package. libjpeg-turbo has same API/ABI as libjpeg. It is relatively faster in JPEG compression/decompression than libjpeg. libjpeg-turbo doesn't support x32 ABI. Work around missing x32 ABI support by building with "--without-simd" option. Move to recipes-graphics [RB] [YOCTO #8628] Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-07python3: fix installed-vs-shipped when 64bit + multilibRobert Yang
Fixed: python3-3.5.0: python3: Files/directories were installed but not shipped in any package: /usr/lib /usr/lib/python3.5 /usr/lib/python3.5/config-3.5m /usr/lib/python3.5/config-3.5m/python.o /usr/lib/python3.5/config-3.5m/Setup.local /usr/lib/python3.5/config-3.5m/Setup /usr/lib/python3.5/config-3.5m/python-config.py /usr/lib/python3.5/config-3.5m/install-sh /usr/lib/python3.5/config-3.5m/config.c.in /usr/lib/python3.5/config-3.5m/makesetup /usr/lib/python3.5/config-3.5m/Setup.config /usr/lib/python3.5/config-3.5m/config.c /usr/lib/python3.5/config-3.5m/Makefile /usr/lib/python3.5/config-3.5m/libpython3.5m.a Please set FILES such that these items are packaged. Alternatively if they are unneeded, avoid installing them or delete them within do_install. python3: 14 installed and not shipped files. [installed-vs-shipped] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-07pulseaudio: add PACKAGECONFIG for lircMartin Jansa
* it's autodetected from sysroot Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-07sstate-sysroot-cruft.sh: Extend the whitelistMartin Jansa
* add more php5 entries * add builder user (from builder.bb) * add .bashrc and .profile in HOME directory of created user * add imgdata directory generated by image.py Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>