| Age | Commit message (Collapse) | Author |
|---|
|
Since its initial commit from the classic OpenEmbedded repository
in 43e94412c45b4b79485a64010c76d89b245bb235, serialization was
commented out, reportedly due to some issue with powerpc in the
boost version 1.36. In the classic OpenEmbedded repository,
serialization has been added again since version 1.4x.
The commit removes the outdated comment and adds serialization to
the BOOST_LIBS after testing `bitbake boost` and bitbaking some
applications using boost from the meta-ros layer for qemuppc.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
eglinfo is a small utility for printing out information about EGL as well
as about its client APIs, OpenGL / OpenGLES 1.x / OpenGLES 2.x / OpenVG.
Recipe originally by Carlos Rafael Giani <dv@pseudoterminal.org>.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a new build system class for waf.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The sysklogd package hasn't got systemd support yet. So in case of
a systemd based system, the commands and corresponding configuration
files should have a lower priority than that of the busybox's syslogd
and klogd utilities. These two utilities from busybox have internal
systemd support if CONFIG_FEATURE_SYSTEMD is enabled. And that config
item is enabled by default.
[YOCTO #5066]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
By default, busybox has CONFIG_FEATURE_SYSLOGD_CFG enabled, but it
doesn't ship a configuration file.
This patch adds a configuration file (/etc/syslog.conf) to the
busybox-syslog package. This configuration file mainly serves as a
placeholder now.
The advantages of this change are:
1. Make the users aware of the fact that the /etc/syslog.conf file
will actually be parsed by busybox's syslogd utility. And configuring
that file will change the logging behaviour.
2. In a systemd based system, this file will prevent the same configuration
file provided by the sysklogd package from messing things up.
[YOCTO #5066]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
acpid: print message if rule directory is inexist
If rule directory is inexist, the acpid initscript will exit with success,
but the daemon will be not running.
Print message in this case to tell user that the daemon is not running.
Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
acpid: install events directory at default.
If rule directory "${sysconfdir}/acpi/events" is inexist,
the acpid initscript will exit with success, but the daemon will be not running.
Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
qemu.bbclass adds PSEUDO_UNLOAD=1 in qemu_run_binary to avoid reference to
pseudo functions that may not exist in the target environment. This patch
detects the addition of that variable within the environment to which the
call applies, even if not present in the parent environment.
As a side effect it fixes a memory leak.
[YOCTO #4843]
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
qemumips* (aka mti-malta32/64) still need to revert the following in
3.10:
"Input: i8042-io - fix up region handling on MIPS" (commit 197a1e96)
It was understood that this was no longer necessary, but X based boots
still suffer the issue.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Updating the BSP SRCREVs for the 3.10.10 korg -stable release.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The 3.10 yaffs2 refresh caused several build errors. One due the single kernel
version support being incomplete, and two others due to core kernel changes
creating incompatbilies with the yaffs2 code.
The following three commits fix the issues.
b76f445 yaffs2: disable procfs support
ecfe5ed yaffs2: convert to kuid_t and kgid_t
fa8efc9 yaffs2: restore multi-kernel version functionality
bumping the SRCREVs for all BSPs to import the fix.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When runqemu tries to determine the MACHINE variable from a
kernel or vmdk filename that doesn't contain any known machine
name, the variable gets set to the filename. It should remain
unset and cause an error.
[YOCTO #2890]
Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We will see the following warning by accident:
$ bitbake nativesdk-glib-2.0
WARNING: QA Issue: nativesdk-glib-2.0-dbg: found library in wrong location:
/opt/poky/0.5.5/sysroots/x86_64-pokysdk-linux/usr/share/gdb/auto-load/opt/
poky/0.5.5/sysroots/x86_64-pokysdk-linux/usr/lib/libglib-2.0.so.0.3600.4-gdb.py
There are two '/opt/poky/0.5.5/sysroots' in the path when the warning
comes, this is what we need since glib-2.0 has done this intentionally
in its configure and Makefile.
This is because the configure script uses the:
ABS_GLIB_RUNTIME_LIBDIR = "readlink -f $libdir/$with_runtime_libdir`"
to figure out the abs dir, so if
/opt/poky/0.5.5/sysroots/x86_64-pokysdk-linux/usr/lib/ exists , there
would be warning, otherwise no warning.
We can change the "readlink -f" to "readlink -m" to fix the host
contamination issue.
Another fix could be:
ABS_GLIB_RUNTIME_LIBDIR =""
But this is much more like a workaround.
[YOCTO #5099]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The gcc recipes reference this however we account for it in the work
directory paths and we don't want recipes depending on the value changing.
This avoids unecessary rebuilds when switching SDKs.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
shlibs dependency calculations on darwin we not functioning correctly, we
need to process the filename without the complete path. If we don't,
"." characters in the path cause problems.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The create_wrapper functions of utils.bbclass cause implicit
dependencies on bash, which may not be suitable for deployment on
target. Besides, the wrapper doesn't seem to be necessary on target.
Signed-off-by: Olof Johansson <olofjn@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Don't start the http server on 0.0.0.0, listen on host ip (end of tap interface) only.
Also use the timeout option (default is 300s for ssh commands) for all the commands
run in this module (mostly because smart update timeouts on mips).
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
PulseAudio's GTK+ support is limited to a test case and automatic icon name
population for applications. This is too limited to enforce GTK+ 3 on all
builds, so disable it by default.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The do-autoreconf patches only change generated files. We run autoreconf ourselves
so we don't need these patches. Worse, they cause failures since the do_patch
task can't rerun after configure since the files change and the patch is no longer
clean.
Drop the patches since we don't need them.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Set memory size to 256M for qemuarm, qemux86, qemux86-64, qemumips,
qemumips64, and qemuppc.
This allows the smart automated tests to run on machines with a GUI
environment (such as Sato) running at the same time, for which 128M is
too limiting. Setting this in runqemu allows users manually using
runqemu to avoid the same out-of-memory issues under similar conditions
using smart, on-target compilation or other uses.
Fixes [YOCTO #5045].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The previous changes were totally broken as quoting globs doesn't work. Remove
the quotes so the rm commands actually delete the stamps.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When using the recently fixed out of build directory bitbake invocations, I was
puzzled why bitbake seemed to be pausing. The reason was due to running the sanity
tests each and every time. This was due to current working directory assumptions
within the sanity test code. Fix this to use TOPDIR.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These have been deprecated for a long time, convert the remaining
references to the correct modules and prepare for removal of the
compatibility support from bitbake.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We run the ping test as soon as we reach the login prompt.
But sometimes (seen in sato systemd) we end up with link down/link up stuff like:
qemux86-64 login: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
The logic behind ping -w 30 -c 1 was to wait at most 30 seconds
for at least one reply, but there is a catch: reply doesn't seems
to be echo reply but any reply (non-reply means loss not network error)
ping's man page:
-w deadline
Specify a timeout, in seconds, before ping exits regardless of
how many packets have been sent or received. In this case ping
does not stop after count packet are sent, it waits either for
deadline expire or until count probes are answered or for some
error notification from network.
Just when the link up/link down happens ping returns:
From 192.168.7.1 icmp_seq=1 Destination Host Unreachable
--- 192.168.7.2 ping statistics ---
1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms
and exits sooner than the 30 seconds timeout.
This patch should do what was originally intended (wait at most
30 seconds for at least one reply).
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These are back ports of 2 patches from upstream to address
CVE-2011-4944
CVE-2013-4238
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
These patches are backported from upstream since it might be risky to update right now
They address the following CVEs
CVE-2012-6329
CVE-2013-1667
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Add dependency on lzo acl e2fsprogs to fix the below building failure
1. commit b268a417259b9[add lzo compression support to restore] needs lzo
cmds-restore.c:30:25: fatal error: lzo/lzoconf.h: No such file or directory
2. btrfs-tools includes <sys/acl.h> which is provided by acl
btrfs-convert.c:32:21: fatal error: sys/acl.h: No such file or directory
3. btrfs-tools always needs e2fsprogs
btrfs-convert.c:44:28: fatal error: ext2fs/ext2_fs.h: No such file or directory
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
* http://gcc.gnu.org/bugzilla//show_bug.cgi?id=57717#c7
* fix the segfault issue of dd on e500v2 targets
Since double-float is disabled for e500v2 targets build due to ICE of gcc-4.8.1,
accordingly %Ld format of sprintf is disabled.
Address Bug 4910 - [p1022ds]urandom: segmentation fault
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
fftw is autodetected from sysroot, add PACKAGECONFIG to make it deterministic
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Fixes the following configure error:
configure:23490: error: radeonsi and r600g require libelf when using LLVM
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The incorrect validation prevents connection to the NAP service on another
device.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
fix the following failures:
ERROR: Nothing PROVIDES 'virtual/lib32-i586-pokymllib32-linux-compilerlibs'
ERROR: Nothing RPROVIDES 'lib32-update-alternatives-cworth'
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This avoids the following new behavior resulting from the create_wrapper
fixes:
llc[11]$ ../poky/scripts/oe-setup-rpmrepo
/usr/bin/env: nativepython: No such file or directory
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This was never a particularly useful browser and is a dead codebase, retire
it and suggest midori instead.
[YOCTO #2318]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The iptables rules for the tap interface are added by runqemu-ifup
everytime we use runqemu to start a qemu target. But it's not cleaned
up when runqemu exits.
This patch cleans up the remaining iptables rules for the tap interface
in runqemu-ifdown.
[YOCTO #5047]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We should provide the user more information if a preconfigured tap
is used. This is because the user might have manually set up the tap
interface to be used by other qemu binaries.
So at a minimum, we should let the user know how to make runqemu skip
that tap interface.
[YOCTO #5047]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
runqemu-ifup and runqemu-ifdown should be pairs. If we're using a
preconfigured tap interface, the runqemu-ifdown should not be invoked
to bring it down.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Recently syslog behaviour changed for systemd images (log
it's in a buffer not in /var/log/messages), account
for the new stuff.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Run list-packageconfig-flags.py on wrlinux's platform in which
the oe-core layer and bitbake layer in different directories:
----
../layers/oe-core/scripts/contrib/list-packageconfig-flags.py
Traceback (most recent call last):
File "../layers/oe-core/scripts/contrib/list-packageconfig-flags.py", line 28, in <module>
import bb.cache
ImportError: No module named bb.cache
----
The script import bb module from bitbake lib dir, the previous
lib dir was hardcode and only worked on poky but not for others.
In this situation, look for bitbake/bin dir in PATH could fix this issue.
[YOCTO #5060]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Without this, it tries to run ./libtool, not the sys-prefixed libtool, which
fails, resulting in dynamic modules being disabled, which in turn results in
compiling the immodules directly into the gtk+3 library.
I tried switching it to using $LIBTOOL rather than hardcoding the path, as
LT_INIT sets LIBTOOL, but it didn't work, I didn't have time to dig further,
and this gets the job done for now.
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When qemu doesn't start or runqemu errors out
(some wrong option passed or sudo needs a password for setting tap) we
want to display the output but oe-core commit 9de7fe11967576f4a8b24e653c6b9a02e5f6d85b/
poky commit 51588936d4a8cde3c9bb05800240c0a0f5dedf8d
changed the kill method and broke this code, so let's fix it.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Update lttng-ust to version 2.2.1 to correspond to the LTTng 2.2
"Cuda" - Tracer toolchain stable release.
This also removes all the local lttng-ust patches, which are now
upstream.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Update lttng-tools to version 2.2.3 to correspond to the LTTng 2.2
"Cuda" - Tracer toolchain stable release.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The recipe builds the two utils which are unpackaged.
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The former is provided by util-linux and the latter is
now to be removed for meta-filesystems.
This allows to generate cramfs images whithout extra layers.
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Previously, the range was 0 to 0. This made it impossible to use
busybox's adduser utility to add a system user. The following error
would appear.
adduser: no uids left
This patch fixes this problem by giving it a reasonable range.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Lukas Bulwahn
Ross Burton
Chen Qi
Bian Naimeng
Roy.Li
Peter A. Bigot
Bruce Ashfield
Mihai Prica
Robert Yang
Richard Purdie
Olof Johansson
Stefan Stanacar
Paul Eggleton
Saul Wold
Jonathan Liu
Chunrong Guo
Jackie Huang
Hongxu Jia
Christopher Larson
Tom Zanussi
Andrea Adami