Description: Move communication files under /run
 Runit by default uses files /etc/runit/stop and /etc/runit/reboot.
 This configuration will not work when /etc is mounted read-only,
 as such this patch renames this files into /run/runit.stop and
 /run/runit.reboot
Author: Dmitry Bogatov <KAction@gnu.org>
Last-Update: 2016-06-02
---
This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
--- a/runit-2.1.2/etc/debian/1
+++ b/runit-2.1.2/etc/debian/1
@@ -6,5 +6,5 @@ PATH=/command:/sbin:/bin:/usr/sbin:/usr/
 /etc/init.d/rcS
 /etc/init.d/rmnologin
 
-touch /etc/runit/stopit
-chmod 0 /etc/runit/stopit
+touch /run/runit.stopit
+chmod 0 /run/runit.stopit
--- a/runit-2.1.2/etc/debian/3
+++ b/runit-2.1.2/etc/debian/3
@@ -4,7 +4,7 @@ exec 2>&1
 PATH=/command:/sbin:/bin:/usr/sbin:/usr/bin
 
 LAST=0
-test -x /etc/runit/reboot && LAST=6
+test -x /run/runit.reboot && LAST=6
 
 echo 'Waiting for services to stop...'
 sv -w196 force-stop /service/*
--- a/runit-2.1.2/etc/debian/ctrlaltdel
+++ b/runit-2.1.2/etc/debian/ctrlaltdel
@@ -4,6 +4,6 @@ PATH=/bin:/usr/bin
 MSG="System is going down in 14 seconds..."
 
 # echo 'disabled.' ; exit
-touch /etc/runit/stopit
-chmod 100 /etc/runit/stopit && echo "$MSG" | wall
+touch /etc/runit.stopit
+chmod 100 /etc/runit.stopit && echo "$MSG" | wall
 /bin/sleep 14
--- a/runit-2.1.2/man/runit-init.8
+++ b/runit-2.1.2/man/runit-init.8
@@ -26,9 +26,9 @@ To signal
 the system halt request,
 .B runit-init
 removes all permissions of the file
-.I /etc/runit/reboot
+.I /run/runit.reboot
 (chmod 0), and sets the execute by owner permission of the file
-.I /etc/runit/stopit
+.I /run/runit.stopit
 (chmod 100).
 Then a CONT signal is sent to
 .BR runit (8).
@@ -40,9 +40,9 @@ To signal
 the system reboot request,
 .B runit-init
 sets the execute by owner permission of the files
-.I /etc/runit/reboot
+.I /run/runit.reboot
 and
-.I /etc/runit/stopit
+.I /run/runit.stopit
 (chmod 100). Then a CONT signal is sent to
 .BR runit (8).
 .SH EXIT CODES
--- a/runit-2.1.2/man/runit.8
+++ b/runit-2.1.2/man/runit.8
@@ -45,11 +45,11 @@ done here.
 If stage 3 returns,
 .B runit
 checks if the file
-.I /etc/runit/reboot
+.I /run/runit.reboot
 exists and has the execute by owner permission set.
 If so, the system is rebooted, it's halted otherwise.
 If
-.I /etc/runit/nosync
+.I /run/runit.nosync
 exists,
 .B runit
 doesn't invoke sync(). This is useful in vservers.
@@ -70,7 +70,7 @@ only accepts signals in stage 2.
 If
 .B runit
 receives a CONT signal and the file
-.I /etc/runit/stopit
+.I /run/runit.stopit
 exists and has the execute by owner permission set,
 .B runit
 is told to shutdown the system.
--- a/runit-2.1.2/src/runit.h
+++ b/runit-2.1.2/src/runit.h
@@ -1,5 +1,5 @@
 #define RUNIT "/sbin/runit"
-#define STOPIT "/etc/runit/stopit"
-#define REBOOT "/etc/runit/reboot"
+#define STOPIT "/run/runit.stopit"
+#define REBOOT "/run/runit.reboot"
 #define NOSYNC "/run/runit.nosync"
 #define CTRLALTDEL "/etc/runit/ctrlaltdel"