# Pulled from OpenEmbedded # # Commented by: Saul Wold Upstream-Status: Inappropriate [configuration] Index: gettext-0.16.1/autoconf-lib-link/m4/lib-link.m4 =================================================================== --- gettext-0.16.1.orig/autoconf-lib-link/m4/lib-link.m4 2006-11-27 09:01:58.000000000 -0800 +++ gettext-0.16.1/autoconf-lib-link/m4/lib-link.m4 2011-03-17 00:36:08.710836720 -0700 @@ -6,12 +6,14 @@ dnl From Bruno Haible. -AC_PREREQ(2.50) +AC_PREREQ(2.54) dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and dnl the libraries corresponding to explicit and implicit dependencies. dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and dnl augments the CPPFLAGS variable. +dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname +dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem. AC_DEFUN([AC_LIB_LINKFLAGS], [ AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) @@ -24,13 +26,16 @@ ac_cv_lib[]Name[]_libs="$LIB[]NAME" ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME" ac_cv_lib[]Name[]_cppflags="$INC[]NAME" + ac_cv_lib[]Name[]_prefix="$LIB[]NAME[]_PREFIX" ]) LIB[]NAME="$ac_cv_lib[]Name[]_libs" LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs" INC[]NAME="$ac_cv_lib[]Name[]_cppflags" + LIB[]NAME[]_PREFIX="$ac_cv_lib[]Name[]_prefix" AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) AC_SUBST([LIB]NAME) AC_SUBST([LTLIB]NAME) + AC_SUBST([LIB]NAME[_PREFIX]) dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the dnl results of this search when this library appears as a dependency. HAVE_LIB[]NAME=yes @@ -46,6 +51,8 @@ dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty. +dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname +dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem. AC_DEFUN([AC_LIB_HAVE_LINKFLAGS], [ AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) @@ -82,17 +89,24 @@ CPPFLAGS="$ac_save_CPPFLAGS" LIB[]NAME= LTLIB[]NAME= + LIB[]NAME[]_PREFIX= + fi AC_SUBST([HAVE_LIB]NAME) AC_SUBST([LIB]NAME) AC_SUBST([LTLIB]NAME) + AC_SUBST([LIB]NAME[_PREFIX]) undefine([Name]) undefine([NAME]) ]) dnl Determine the platform dependent parameters needed to use rpath: -dnl libext, shlibext, hardcode_libdir_flag_spec, hardcode_libdir_separator, -dnl hardcode_direct, hardcode_minus_L. +dnl acl_libext, +dnl acl_shlibext, +dnl acl_hardcode_libdir_flag_spec, +dnl acl_hardcode_libdir_separator, +dnl acl_hardcode_direct, +dnl acl_hardcode_minus_L. AC_DEFUN([AC_LIB_RPATH], [ dnl Tell automake >= 1.10 to complain if config.rpath is missing. @@ -109,12 +123,14 @@ acl_cv_rpath=done ]) wl="$acl_cv_wl" - libext="$acl_cv_libext" - shlibext="$acl_cv_shlibext" - hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" - hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" - hardcode_direct="$acl_cv_hardcode_direct" - hardcode_minus_L="$acl_cv_hardcode_minus_L" + acl_libext="$acl_cv_libext" + acl_shlibext="$acl_cv_shlibext" + acl_libname_spec="$acl_cv_libname_spec" + acl_library_names_spec="$acl_cv_library_names_spec" + acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" + acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" + acl_hardcode_direct="$acl_cv_hardcode_direct" + acl_hardcode_minus_L="$acl_cv_hardcode_minus_L" dnl Determine whether the user wants rpath handling at all. AC_ARG_ENABLE(rpath, [ --disable-rpath do not hardcode runtime library paths], @@ -124,20 +140,24 @@ dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and dnl the libraries corresponding to explicit and implicit dependencies. dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables. +dnl Also, sets the LIB${NAME}_PREFIX variable to nonempty if libname was found +dnl in ${LIB${NAME}_PREFIX}/$acl_libdirstem. AC_DEFUN([AC_LIB_LINKFLAGS_BODY], [ AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) + dnl Autoconf >= 2.61 supports dots in --with options. + define([N_A_M_E],[m4_if(m4_version_compare(m4_defn([m4_PACKAGE_VERSION]),[2.61]),[-1],[translit([$1],[.],[_])],[$1])]) dnl By default, look in $includedir and $libdir. use_additional=yes AC_LIB_WITH_FINAL_PREFIX([ eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" ]) - AC_LIB_ARG_WITH([lib$1-prefix], -[ --with-lib$1-prefix[=DIR] search for lib$1 in DIR/include and DIR/lib - --without-lib$1-prefix don't search for lib$1 in includedir and libdir], + AC_LIB_ARG_WITH([lib]N_A_M_E[-prefix], +[ --with-lib]N_A_M_E[-prefix[=DIR] search for lib$1 in DIR/include and DIR/lib + --without-lib]N_A_M_E[-prefix don't search for lib$1 in includedir and libdir], [ if test "X$withval" = "Xno"; then use_additional=no @@ -158,6 +178,7 @@ LIB[]NAME= LTLIB[]NAME= INC[]NAME= + LIB[]NAME[]_PREFIX= rpathdirs= ltrpathdirs= names_already_handled= @@ -197,27 +218,53 @@ found_la= found_so= found_a= + eval libname=\"$acl_libname_spec\" # typically: libname=lib$name + if test -n "$acl_shlibext"; then + shrext=".$acl_shlibext" # typically: shrext=.so + else + shrext= + fi if test $use_additional = yes; then - if test -n "$shlibext" \ - && { test -f "$additional_libdir/lib$name.$shlibext" \ - || { test "$shlibext" = dll \ - && test -f "$additional_libdir/lib$name.dll.a"; }; }; then - found_dir="$additional_libdir" - if test -f "$additional_libdir/lib$name.$shlibext"; then - found_so="$additional_libdir/lib$name.$shlibext" + dir="$additional_libdir" + dnl The same code as in the loop below: + dnl First look for a shared library. + if test -n "$acl_shlibext"; then + if test -f "$dir/$libname$shrext"; then + found_dir="$dir" + found_so="$dir/$libname$shrext" else - found_so="$additional_libdir/lib$name.dll.a" + if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then + ver=`(cd "$dir" && \ + for f in "$libname$shrext".*; do echo "$f"; done \ + | sed -e "s,^$libname$shrext\\\\.,," \ + | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ + | sed 1q ) 2>/dev/null` + if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then + found_dir="$dir" + found_so="$dir/$libname$shrext.$ver" + fi + else + eval library_names=\"$acl_library_names_spec\" + for f in $library_names; do + if test -f "$dir/$f"; then + found_dir="$dir" + found_so="$dir/$f" + break + fi + done + fi fi - if test -f "$additional_libdir/lib$name.la"; then - found_la="$additional_libdir/lib$name.la" + fi + dnl Then look for a static library. + if test "X$found_dir" = "X"; then + if test -f "$dir/$libname.$acl_libext"; then + found_dir="$dir" + found_a="$dir/$libname.$acl_libext" fi - else - if test -f "$additional_libdir/lib$name.$libext"; then - found_dir="$additional_libdir" - found_a="$additional_libdir/lib$name.$libext" - if test -f "$additional_libdir/lib$name.la"; then - found_la="$additional_libdir/lib$name.la" - fi + fi + if test "X$found_dir" != "X"; then + if test -f "$dir/$libname.la"; then + found_la="$dir/$libname.la" fi fi fi @@ -227,26 +274,44 @@ case "$x" in -L*) dir=`echo "X$x" | sed -e 's/^X-L//'` - if test -n "$shlibext" \ - && { test -f "$dir/lib$name.$shlibext" \ - || { test "$shlibext" = dll \ - && test -f "$dir/lib$name.dll.a"; }; }; then - found_dir="$dir" - if test -f "$dir/lib$name.$shlibext"; then - found_so="$dir/lib$name.$shlibext" + dnl First look for a shared library. + if test -n "$acl_shlibext"; then + if test -f "$dir/$libname$shrext"; then + found_dir="$dir" + found_so="$dir/$libname$shrext" else - found_so="$dir/lib$name.dll.a" - fi - if test -f "$dir/lib$name.la"; then - found_la="$dir/lib$name.la" + if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then + ver=`(cd "$dir" && \ + for f in "$libname$shrext".*; do echo "$f"; done \ + | sed -e "s,^$libname$shrext\\\\.,," \ + | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ + | sed 1q ) 2>/dev/null` + if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then + found_dir="$dir" + found_so="$dir/$libname$shrext.$ver" + fi + else + eval library_names=\"$acl_library_names_spec\" + for f in $library_names; do + if test -f "$dir/$f"; then + found_dir="$dir" + found_so="$dir/$f" + break + fi + done + fi fi - else - if test -f "$dir/lib$name.$libext"; then + fi + dnl Then look for a static library. + if test "X$found_dir" = "X"; then + if test -f "$dir/$libname.$acl_libext"; then found_dir="$dir" - found_a="$dir/lib$name.$libext" - if test -f "$dir/lib$name.la"; then - found_la="$dir/lib$name.la" - fi + found_a="$dir/$libname.$acl_libext" + fi + fi + if test "X$found_dir" != "X"; then + if test -f "$dir/$libname.la"; then + found_la="$dir/$libname.la" fi fi ;; @@ -282,12 +347,12 @@ ltrpathdirs="$ltrpathdirs $found_dir" fi dnl The hardcoding into $LIBNAME is system dependent. - if test "$hardcode_direct" = yes; then + if test "$acl_hardcode_direct" = yes; then dnl Using DIR/libNAME.so during linking hardcodes DIR into the dnl resulting binary. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" else - if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then + if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then dnl Use an explicit option to hardcode DIR into the resulting dnl binary. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" @@ -318,13 +383,13 @@ if test -z "$haveit"; then LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir" fi - if test "$hardcode_minus_L" != no; then + if test "$acl_hardcode_minus_L" != no; then dnl FIXME: Not sure whether we should use dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" dnl here. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" else - dnl We cannot use $hardcode_runpath_var and LD_RUN_PATH + dnl We cannot use $acl_hardcode_runpath_var and LD_RUN_PATH dnl here, because this doesn't fit in flags passed to the dnl compiler. So give up. No hardcoding. This affects only dnl very old systems. @@ -512,18 +577,18 @@ done done if test "X$rpathdirs" != "X"; then - if test -n "$hardcode_libdir_separator"; then + if test -n "$acl_hardcode_libdir_separator"; then dnl Weird platform: only the last -rpath option counts, the user must dnl pass all path elements in one option. We can arrange that for a dnl single library, but not when more than one $LIBNAMEs are used. alldirs= for found_dir in $rpathdirs; do - alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir" + alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" done - dnl Note: hardcode_libdir_flag_spec uses $libdir and $wl. + dnl Note: acl_hardcode_libdir_flag_spec uses $libdir and $wl. acl_save_libdir="$libdir" libdir="$alldirs" - eval flag=\"$hardcode_libdir_flag_spec\" + eval flag=\"$acl_hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" else @@ -531,7 +596,7 @@ for found_dir in $rpathdirs; do acl_save_libdir="$libdir" libdir="$found_dir" - eval flag=\"$hardcode_libdir_flag_spec\" + eval flag=\"$acl_hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" done @@ -642,3 +707,79 @@ fi AC_SUBST([$1]) ]) + +dnl For those cases where a variable contains several -L and -l options +dnl referring to unknown libraries and directories, this macro determines the +dnl necessary additional linker options for the runtime path. +dnl AC_LIB_LINKFLAGS_FROM_LIBS([LDADDVAR], [LIBSVALUE], [USE-LIBTOOL]) +dnl sets LDADDVAR to linker options needed together with LIBSVALUE. +dnl If USE-LIBTOOL evaluates to non-empty, linking with libtool is assumed, +dnl otherwise linking without libtool is assumed. +AC_DEFUN([AC_LIB_LINKFLAGS_FROM_LIBS], +[ + AC_REQUIRE([AC_LIB_RPATH]) + AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) + $1= + if test "$enable_rpath" != no; then + if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then + dnl Use an explicit option to hardcode directories into the resulting + dnl binary. + rpathdirs= + next= + for opt in $2; do + if test -n "$next"; then + dir="$next" + dnl No need to hardcode the standard /usr/lib. + if test "X$dir" != "X/usr/$acl_libdirstem"; then + rpathdirs="$rpathdirs $dir" + fi + next= + else + case $opt in + -L) next=yes ;; + -L*) dir=`echo "X$opt" | sed -e 's,^X-L,,'` + dnl No need to hardcode the standard /usr/lib. + if test "X$dir" != "X/usr/$acl_libdirstem"; then + rpathdirs="$rpathdirs $dir" + fi + next= ;; + *) next= ;; + esac + fi + done + if test "X$rpathdirs" != "X"; then + if test -n ""$3""; then + dnl libtool is used for linking. Use -R options. + for dir in $rpathdirs; do + $1="${$1}${$1:+ }-R$dir" + done + else + dnl The linker is used for linking directly. + if test -n "$acl_hardcode_libdir_separator"; then + dnl Weird platform: only the last -rpath option counts, the user + dnl must pass all path elements in one option. + alldirs= + for dir in $rpathdirs; do + alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$dir" + done + acl_save_libdir="$libdir" + libdir="$alldirs" + eval flag=\"$acl_hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + $1="$flag" + else + dnl The -rpath options are cumulative. + for dir in $rpathdirs; do + acl_save_libdir="$libdir" + libdir="$dir" + eval flag=\"$acl_hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + $1="${$1}${$1:+ }$flag" + done + fi + fi + fi + fi + fi + AC_SUBST([$1]) +]) Index: gettext-0.16.1/autoconf-lib-link/config.rpath =================================================================== --- gettext-0.16.1.orig/autoconf-lib-link/config.rpath 2006-11-27 09:01:58.000000000 -0800 +++ gettext-0.16.1/autoconf-lib-link/config.rpath 2011-03-17 00:33:23.336539490 -0700 @@ -2,7 +2,7 @@ # Output a system dependent set of variables, describing how to set the # run time search path of shared libraries in an executable. # -# Copyright 1996-2006 Free Software Foundation, Inc. +# Copyright 1996-2007 Free Software Foundation, Inc. # Taken from GNU libtool, 2001 # Originally by Gordon Matzigkeit , 1996 # @@ -47,6 +47,18 @@ done cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'` +# Code taken from libtool.m4's _LT_CC_BASENAME. + +for cc_temp in $CC""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'` + # Code taken from libtool.m4's AC_LIBTOOL_PROG_COMPILER_PIC. wl= @@ -64,7 +76,14 @@ ;; esac ;; - mingw* | pw32* | os2*) + darwin*) + case $cc_basename in + xlc*) + wl='-Wl,' + ;; + esac + ;; + mingw* | cygwin* | pw32* | os2*) ;; hpux9* | hpux10* | hpux11*) wl='-Wl,' @@ -74,7 +93,7 @@ ;; newsos6) ;; - linux*) + linux* | k*bsd*-gnu) case $cc_basename in icc* | ecc*) wl='-Wl,' @@ -100,7 +119,7 @@ osf3* | osf4* | osf5*) wl='-Wl,' ;; - sco3.2v5*) + rdos*) ;; solaris*) wl='-Wl,' @@ -108,11 +127,14 @@ sunos4*) wl='-Qoption ld ' ;; - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + sysv4 | sysv4.2uw2* | sysv4.3*) wl='-Wl,' ;; sysv4*MP*) ;; + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + wl='-Wl,' + ;; unicos*) wl='-Wl,' ;; @@ -141,6 +163,10 @@ # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; openbsd*) with_gnu_ld=no ;; @@ -189,11 +215,11 @@ ld_shlibs=no fi ;; - interix3*) + interix[3-9]*) hardcode_direct=no hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ;; - linux*) + gnu* | linux* | k*bsd*-gnu) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then : else @@ -280,7 +306,7 @@ strings "$collect2name" | grep resolve_lib_name >/dev/null then # We have reworked collect2 - hardcode_direct=yes + : else # We have old collect2 hardcode_direct=unsupported @@ -359,7 +385,7 @@ hardcode_direct=yes hardcode_minus_L=yes ;; - freebsd* | kfreebsd*-gnu | dragonfly*) + freebsd* | dragonfly*) hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes ;; @@ -412,18 +438,22 @@ hardcode_libdir_separator=: ;; openbsd*) - hardcode_direct=yes - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + if test -f /usr/libexec/ld.so; then + hardcode_direct=yes + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + else + case "$host_os" in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + hardcode_libdir_flag_spec='-R$libdir' + ;; + *) + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + esac + fi else - case "$host_os" in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - hardcode_libdir_flag_spec='-R$libdir' - ;; - *) - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - esac + ld_shlibs=no fi ;; os2*) @@ -471,7 +501,7 @@ ld_shlibs=yes fi ;; - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*) + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* |sco3.2v5.0.[024]*) ;; sysv5* | sco3.2v5* | sco5v6*) hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' @@ -488,33 +518,51 @@ # Check dynamic linker characteristics # Code taken from libtool.m4's AC_LIBTOOL_SYS_DYNAMIC_LINKER. +# Unlike libtool.m4, here we don't care about _all_ names of the library, but +# only about the one the linker finds when passed -lNAME. This is the last +# element of library_names_spec in libtool.m4, or possibly two of them if the +# linker has special search rules. +library_names_spec= # the last element of library_names_spec in libtool.m4 libname_spec='lib$name' case "$host_os" in aix3*) + library_names_spec='$libname.a' ;; aix4* | aix5*) + library_names_spec='$libname$shrext' ;; amigaos*) + library_names_spec='$libname.a' ;; beos*) + library_names_spec='$libname$shrext' ;; bsdi[45]*) + library_names_spec='$libname$shrext' ;; cygwin* | mingw* | pw32*) shrext=.dll + library_names_spec='$libname.dll.a $libname.lib' ;; darwin* | rhapsody*) shrext=.dylib + library_names_spec='$libname$shrext' ;; dgux*) + library_names_spec='$libname$shrext' ;; freebsd1*) ;; - kfreebsd*-gnu) - ;; freebsd* | dragonfly*) + case "$host_os" in + freebsd[123]*) + library_names_spec='$libname$shrext$versuffix' ;; + *) + library_names_spec='$libname$shrext' ;; + esac ;; gnu*) + library_names_spec='$libname$shrext' ;; hpux9* | hpux10* | hpux11*) case $host_cpu in @@ -528,10 +576,13 @@ shrext=.sl ;; esac + library_names_spec='$libname$shrext' ;; - interix3*) + interix[3-9]*) + library_names_spec='$libname$shrext' ;; irix5* | irix6* | nonstopux*) + library_names_spec='$libname$shrext' case "$host_os" in irix5* | nonstopux*) libsuff= shlibsuff= @@ -548,33 +599,46 @@ ;; linux*oldld* | linux*aout* | linux*coff*) ;; - linux*) + linux* | k*bsd*-gnu) + library_names_spec='$libname$shrext' ;; knetbsd*-gnu) + library_names_spec='$libname$shrext' ;; netbsd*) + library_names_spec='$libname$shrext' ;; newsos6) + library_names_spec='$libname$shrext' ;; nto-qnx*) + library_names_spec='$libname$shrext' ;; openbsd*) + library_names_spec='$libname$shrext$versuffix' ;; os2*) libname_spec='$name' shrext=.dll + library_names_spec='$libname.a' ;; osf3* | osf4* | osf5*) + library_names_spec='$libname$shrext' ;; solaris*) + library_names_spec='$libname$shrext' ;; sunos4*) + library_names_spec='$libname$shrext$versuffix' ;; sysv4 | sysv4.3*) + library_names_spec='$libname$shrext' ;; sysv4*MP*) + library_names_spec='$libname$shrext' ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + library_names_spec='$libname$shrext' ;; uts4*) ;; @@ -583,6 +647,8 @@ sed_quote_subst='s/\(["`$\\]\)/\\\1/g' escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"` shlibext=`echo "$shrext" | sed -e 's,^\.,,'` +escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` +escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <