Age | Commit message (Collapse) | Author |
|
Running wic commands on Debian 10 systems fail in
scripts/lib/wic/engine.py:get_partitions() due to new stderr output captured
when trying to parse the output from /sbin/parted as a non-root user.
The parted command calls the dmidecode utility, which produces this error
as a non-root user:
/sys/firmware/dmi/tables/smbios_entry_point: Permission denied
/dev/mem: Permission denied
scripts/lib/wic/engine.py:get_partitions() calls misc.py:exec_cmd(),
a subprocess wrapper which returns a combined stderr and sdtdout.
These messages to stderr confuse the partition table parser in
get_partitions().
This patch has the partition table parser ignore lines before the expected
"BYT;" header string.
Running wic in Debian 9 does not have this issue.
Signed-off-by: Geoff Parker <geoffhp@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Whilst its tempting to call bitbake_main(), the script also directly executes
bitbake. By doing both this creates all kinds of races. Therefore
change to use subprocess execution in all cases.
(From OE-Core rev: 0507ec4c6069490c9a503e9e2b65f0e7b1962d34)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Signed-off-by: Michael Davis <michael.davis@essvote.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Simplify and removed unnecessary codes.
Refactor to allow pythonic loop.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Currently the manual execution display step by sorting
the step as string, where steps were not being sorted
correctly when there are more than 9 steps.
Fixed the step sorting by sorting step as integer.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Current manualexecution required pressing enter button to show each step
information, where this was wasting execution time. Enable display
full steps without needing to any press enter button.
Signed-off-by: Mazliana <mazliana.mohamad@intel.com>
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Current input checking does not match the standard input practiced
by QA team. Change the input checking to match the standard
input practiced by the QA team.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Rather than simply discarding the ptest data, change the code to discard
it when writing out the new testresult files, or optionally either preserve
it, or write it as seperate discrete logs.
This means the autobuilder should start writing out individual ptest log
files as well as allowing ueers to extract these manually.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Store operations using a single file as a source weren't working as the os.walk
command didn't like being given a single file. Fix the store operation to
work for single files.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Current validation check function inside resulttool disallow the
report for single result file although the underlying library
was able to handle both directory and file as source input to report.
Removed the validation check as it was no longer needed and to
enable report for single result file.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
These functions can be reused by the resulttool code so move to the common
function library for this purpose.
(From OE-Core rev: c66f848938c04e133259c5b6903dc592866ab385)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This turns the core of the script into a library function. Ultimately this
will let us call that code with custom 'keywords' rather than relying
on the data parsed from bitbake metadata which can't be used when archiving
historical results.
(From OE-Core rev: 4820ca2b0850e29b04a4fd5659a6e9837d6714d0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Integers were being compared to strings leading to missing buildstats comparision
data. Fix this.
(From OE-Core rev: 2dbbf598192ae2b3aa488df042f56aa6c6634a00)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When comparing branches, correctly filter the revisions corresponding
to the specific branch specified.
Also use the commit numbers as a way to gauge spatially related commits
for comparision meaning comparisions for out of order build revisions
becomes meaninful.
This should improve the reporting for autobuilder generated builds.
Also improve the branch option help text.
(From OE-Core rev: 9f6f4ab6eec9dca07af7f53da5f737a6167bfb38)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The code won't currently allow comparisions of two commits on different
branches even if the commits are specified by their hashes.
This updates the code to search two branches for any relavent commits,
hence allowing comparisions to be made. A particularly useful case is
master vs. master-next for example.
(From OE-Core rev: 2d835bb1570c515ae501442f3ce19fae8e249b27)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allow the branch to be set without the hostname option. Previously
if hostname wasn't set, branch would be overwritten regardless of
whether it was set or not.
(From OE-Core rev: 3ec43bf4c6c8f7730a67f63ad4e14903f289014e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We found that manualexecution does not capture test suite values
correctly if there are more than one test suite in test cases.
After verification has made we found out we should retrieved
full test cases value <test_module.test_suite.test_case> from
oeqa/manual/ json file rather than split it them into new
variables test_suite and test_cases.
Signed-off-by: Mazliana <mazliana.mohamad@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Enable roll-up all test results belong to a commit
and to provide a roll-up report.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To enable store for testresults.json file from manualexecution,
add layers metadata to configuration and add "manual" map to
resultutils.store_map.
To enable regression for manual, add "manual" map to
resultutils.regression_map. Also added compulsory configurations
('MACHINE', 'IMAGE_BASENAME') to manualexecution.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Sorted regression results to provide friendly viewing of report.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
ptest suites with no results don't show up on the reports even though we have
a duration for them. Fix this so the fact they report no tests is visible.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently some older results files cause the code to give tracebacks.
Handle these missing sections more cleanly.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently we cant store results if the results files span multiple
different build revisons. Remove this limitation by iterating.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is a combined patch of the various tweaks and improvements I
made to resulttool:
* Avoid subprocess.run() as its a python 3.6 feature and we
have autobuilder workers with 3.5.
* Avoid python keywords as variable names
* Simplify dict accesses using .get()
* Rename resultsutils -> resultutils to match the resultstool ->
resulttool rename
* Formalised the handling of "file_name" to "TESTSERIES" which the code
will now add into the json configuration data if its not present, based
on the directory name.
* When we don't have failed test cases, print something saying so
instead of an empty table
* Tweak the table headers in the report to be more readable (reference
"Test Series" instead if file_id and ID instead of results_id)
* Improve/simplify the max string length handling
* Merge the counts and percentage data into one table in the report
since printing two reports of the same data confuses the user
* Removed the confusing header in the regression report
* Show matches, then regressions, then unmatched runs in the regression
report, also remove chatting unneeded output
* Try harder to "pair" up matching configurations to reduce noise in
the regressions report
* Abstracted the "mapping" table concept used to pairing in the
regression code to general code in resultutils
* Created multiple mappings for results analysis, results storage and
'flattening' results data in a merge
* Simplify the merge command to take a source and a destination,
letting the destination be a directory or a file, removing the need for
an output directory parameter
* Add the 'IMAGE_PKGTYPE' and 'DISTRO' config options to the regression
mappings
* Have the store command place the testresults files in a layout from
the mapping, making commits into the git repo for results storage more
useful for simple comparison purposes
* Set the oe-git-archive tag format appropriately for oeqa results
storage (and simplify the commit messages closer to their defaults)
* Fix oe-git-archive to use the commit/branch data from the results file
* Cleaned up the command option help to match other changes
* Follow the model of git branch/tag processing used by oe-build-perf-report
and use that to read the data using git show to avoid branch change
* Add ptest summary to the report command
* Update the tests to match the above changes
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Integrated “manualexecution” operation to resulttool scripts.
Manual execution script is a helper script to execute all manual
test cases in baseline command, which consists of user guideline
steps and the expected results. The last step will ask user to
provide their input to execute result. The input options are
passed/failed/blocked/skipped status. The result given will be
written in testresults.json including log error from the user
input and configuration if there is any.The output test result
for json file is created by using OEQA library.
The configuration part is manually key-in by the user. The system
allow user to specify how many configuration they want to add and
they need to define the required configuration name and value pair.
In QA perspective, "configuration" means the test environments and
parameters used during QA setup before testing can be carry out.
Example of configurations: image used for boot up, host machine
distro used, poky configurations, etc.
The purpose of adding the configuration is to standardize the
output test result format between automation and manual execution.
To use these scripts, first source oe environment, then run the
entry point script to look for help.
$ resulttool
To execute manual test cases, execute the below
$ resulttool manualexecution <manualjsonfile>
By default testresults.json store in <build_dir>/tmp/log/manual/
[YOCTO #12651]
Signed-off-by: Mazliana <mazliana.mohamad@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
OEQA outputs test results into json files and these files were
archived by Autobuilder during QA releases. Example: each oe-selftest
run by Autobuilder for different host distro generate a
testresults.json file.
These scripts were developed as a test result tools to manage
these testresults.json file.
Using the "store" operation, user can store multiple testresults.json
files as well as the pre-configured directories used to hold those files.
Using the "merge" operation, user can merge multiple testresults.json
files to a target file.
Using the "report" operation, user can view the test result summary
for all available testresults.json files inside a ordinary directory
or a git repository.
Using the "regression-file" operation, user can perform regression
analysis on testresults.json files specified. Using the "regression-dir"
and "regression-git" operations, user can perform regression analysis
on directory and git accordingly.
These resulttool operations expect the testresults.json file to use
the json format below.
{
"<testresult_1>": {
"configuration": {
"<config_name_1>": "<config_value_1>",
"<config_name_2>": "<config_value_2>",
...
"<config_name_n>": "<config_value_n>",
},
"result": {
"<testcase_namespace_1>": {
"status": "<PASSED or FAILED or ERROR or SKIPPED>",
"log": "<failure or error logging>"
},
"<testcase_namespace_2>": {
"status": "<PASSED or FAILED or ERROR or SKIPPED>",
"log": "<failure or error logging>"
},
...
"<testcase_namespace_n>": {
"status": "<PASSED or FAILED or ERROR or SKIPPED>",
"log": "<failure or error logging>"
},
}
},
...
"<testresult_n>": {
"configuration": {
"<config_name_1>": "<config_value_1>",
"<config_name_2>": "<config_value_2>",
...
"<config_name_n>": "<config_value_n>",
},
"result": {
"<testcase_namespace_1>": {
"status": "<PASSED or FAILED or ERROR or SKIPPED>",
"log": "<failure or error logging>"
},
"<testcase_namespace_2>": {
"status": "<PASSED or FAILED or ERROR or SKIPPED>",
"log": "<failure or error logging>"
},
...
"<testcase_namespace_n>": {
"status": "<PASSED or FAILED or ERROR or SKIPPED>",
"log": "<failure or error logging>"
},
}
},
}
To use these scripts, first source oe environment, then run the
entry point script to look for help.
$ resulttool
To store test result from oeqa automated tests, execute the below
$ resulttool store <source_dir> <git_branch>
To merge multiple testresults.json files, execute the below
$ resulttool merge <base_result_file> <target_result_file>
To report test report, execute the below
$ resulttool report <source_dir>
To perform regression file analysis, execute the below
$ resulttool regression-file <base_result_file> <target_result_file>
To perform regression dir analysis, execute the below
$ resulttool regression-dir <base_result_dir> <target_result_dir>
To perform regression git analysis, execute the below
$ resulttool regression-git <source_dir> <base_branch> <target_branch>
[YOCTO# 13012]
[YOCTO# 12654]
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Then we can get user's UID and GID rather than hardcode to 1000, e.g.:
- Without sudo
$ runqemu-gen-tapdevs --help
[snip]
$ sudo ../poky/scripts/runqemu-gen-tapdevs 15220 100 4 tmp/sysroots-components/x86_64/qemu-helper-native/usr/bin
[snip]
- With sudo
$ sudo ../poky/scripts/runqemu-gen-tapdevs --help
[snip]
$ sudo ../poky/scripts/runqemu-gen-tapdevs 15220 100 4 tmp/sysroots-components/x86_64/qemu-helper-native/usr/bin
[snip]
(From OE-Core rev: 446e7da7e56f9de3602498b5ef40e9e0f8f71837)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Where possible pass lists instead of strings, don't use a subshell, and call
check*() instead of using Popen directly.
(From OE-Core rev: d2374623444752af1ad748ed36b68ea58f629bf6)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Without installing gitpython package, oe-git-archive will face error
below, where it was referencing key that was non-existent inside
metadata object.
Traceback (most recent call last):
File "<poky_dir>/scripts/oe-git-archive", line 271, in <module>
sys.exit(main())
File "<poky_dir>/scripts/oe-git-archive", line 229, in main
'commit_count': metadata['layers']['meta']['commit_count'],
KeyError: 'commit_count'
Fix this error by adding exception catch when referencing
non-existent key (based on inputs provided by Richard Purdie).
[YOCTO# 13082]
(From OE-Core rev: 9a3cc9b8523b78dda6c3f3f2e12798b2b907d7e5)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
On python versions with close_fds=True (python 3.2 onwards), the tap
device lockfile isn't passed to the child process.
Since this guards against use of an active interface, we really want this
here, so pass it in pass_fds. This means if the parent exits early, the child
still holds the lock, avoiding messages like:
runqemu - ERROR - Failed to run qemu: qemu-system-x86_64: could not configure /dev/net/tun (tap0): Device or resource busy
(From OE-Core rev: 17a0a067d597c445c5892ff9914e91a2187f7e09)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Various tweaks:
- Balance up the aquire/release functions
- Use debug messge for both acquiring and release message for consistency in logs
- Use None instead of an empty string
- Reset the value of the field if we don't have the lock any more
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
subprocess.run() was introduced in Python 3.5. We currently support down to
Python 3.4 so I've replaced it with subprocess.check_call() which is available
in that version.
Signed-off-by: Michael Halstead <mhalstead@linuxfoundation.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It's really good that OE supports multiple EFI_PROVIDERs and that
commit 9a1709278de87 ("wic: isoimage-isohybrid: use grub-efi from
deploy dir") makes re-use of the grub-efi built image, but we should
still respect the standard otherwise the ISO will not boot, so install
grub images as boot[x64|ia32].efi not ${PN}-boot[x64|ia32].efi.
(From OE-Core rev: 1608129692d92c239b5fb9244b649a32b9009254)
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
The current handling of SIGTERM is incorrect as the process pid returned
by Popen call with shell setting to True is actualy the shell instead of
the qemu process. So use shlex to split cmd so that we can avoid using
shell=True. This ensures the child process is the actual qemu process.
Also, as we install a SIGTERM handler, we need handle the situation of
qemu terminated by SIGTERM, otherwise we will get ERROR message in such
case.
Besides, we have a problem that after running qemu, the terminal's behavior
is incorrect regarding long lines or long commands. Long commands or long
outputs should appear in multiple lines, but they appear in the same line,
overriding previous output. Use `tput smam' to fix this problem.
(From OE-Core rev: e8acef383767cfd1ef0c3d3c45d9d6eb1c83b3e7)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
It solves below error:
-- snip --
return 'qemu-system-%s' % qbsys
UnboundLocalError: local variable 'qbsys' referenced before assignment
-- snip --
[YOCTO #12846]
(From OE-Core rev: 519273f54c0b8a6fff36afeb7646d8e37717be22)
Signed-off-by: Jagadeesh Krishnanjanappa <jkrishnanjanappa@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Add SIGTERM handler so that runqemu could clean things up correctly
when receving such signal.
This problem was originally observed when running testimage. On
some hosts, after running testimage task, the user has to manually
operate on the tap interface (e.g. `sudo ip link del tap0') in order
for the next runqemu command to launch successfully.
The problem is about runqemu, SIGTERM and network manager on the host.
In testimage task, the runqemu process will receive SIGTERM. In such
situation, its cleanup() function is not run, resulting in tap interface
not cleaned up. On some hosts, the network manager will bring down the
tap interface automatically, thus this problem. I saw this problem on
Fedora21.
I think we'd better just clean up the tap interface ourselves.
So this patch adds to runqemu a SIGTERM handler, in which the actual
qemu process is terminated and other things cleaned up.
(From OE-Core rev: 02709d4709c56f9b9095e3555da35b659b03a8a3)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
When Layer A and Layer B depend on each other, then we will end up in a
recursive loop in function recurse_dependencies(). To avoid such situation
before making the recursive function call we check whether or not we have
already processed this layer.
e.g. without this patch, running this script on layers with dependency loops, we are seeing:
$ yocto-check-layer -d /srv/work/oe/meta-openembedded/
INFO: Detected layers:
INFO: meta-python: LayerType.SOFTWARE, /srv/work/oe/meta-openembedded/meta-python
INFO: meta-filesystems: LayerType.SOFTWARE, /srv/work/oe/meta-openembedded/meta-filesystems
INFO: meta-gnome: LayerType.SOFTWARE, /srv/work/oe/meta-openembedded/meta-gnome
INFO: meta-xfce: LayerType.SOFTWARE, /srv/work/oe/meta-openembedded/meta-xfce
INFO: meta-networking: LayerType.SOFTWARE, /srv/work/oe/meta-openembedded/meta-networking
INFO: meta-initramfs: LayerType.SOFTWARE, /srv/work/oe/meta-openembedded/meta-initramfs
INFO: meta-oe: LayerType.SOFTWARE, /srv/work/oe/meta-openembedded/meta-oe
INFO: meta-multimedia: LayerType.SOFTWARE, /srv/work/oe/meta-openembedded/meta-multimedia
INFO: meta-perl: LayerType.SOFTWARE, /srv/work/oe/meta-openembedded/meta-perl
INFO: meta-webserver: LayerType.SOFTWARE, /srv/work/oe/meta-openembedded/meta-webserver
INFO:
INFO: Setting up for meta-python(LayerType.SOFTWARE), /srv/work/oe/meta-openembedded/meta-python
DEBUG: Processing dependencies core openembedded-layer for layer meta-python.
DEBUG: Processing dependencies core networking-layer for layer meta-oe.
DEBUG: Processing dependencies core openembedded-layer meta-python for layer meta-networking.
DEBUG: Processing dependencies core networking-layer for layer meta-oe.
DEBUG: Processing dependencies core openembedded-layer meta-python for layer meta-networking.
DEBUG: Processing dependencies core networking-layer for layer meta-oe.
DEBUG: Processing dependencies core openembedded-layer meta-python for layer meta-networking.
DEBUG: Processing dependencies core networking-layer for layer meta-oe.
DEBUG: Processing dependencies core openembedded-layer meta-python for layer meta-networking.
DEBUG: Processing dependencies core networking-layer for layer meta-oe.
DEBUG: Processing dependencies core openembedded-layer meta-python for layer meta-networking.
DEBUG: Processing dependencies core networking-layer for layer meta-oe.
DEBUG: Processing dependencies core openembedded-layer meta-python for layer meta-networking.
DEBUG: Processing dependencies core networking-layer for layer meta-oe.
DEBUG: Processing dependencies core openembedded-layer meta-python for layer meta-networking.
DEBUG: Processing dependencies core networking-layer for layer meta-oe.
DEBUG: Processing dependencies core openembedded-layer meta-python for layer meta-networking.
DEBUG: Processing dependencies core networking-layer for layer meta-oe.
DEBUG: Processing dependencies core openembedded-layer meta-python for layer meta-networking.
DEBUG: Processing dependencies core networking-layer for layer meta-oe.
DEBUG: Processing dependencies core openembedded-layer meta-python for layer meta-networking.
DEBUG: Processing dependencies core networking-layer for layer meta-oe.
DEBUG: Processing dependencies core openembedded-layer meta-python for layer meta-networking.
...
...
...
[keep repeating]
This patch fixes this situation.
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 171900b4bcb06416685ce90b63114a10fefe0b94)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Remove usage of a specific amount of memory and let it be controlled by
users. This was the default behaviour before it was changed by commit
3b79d9a78 that switched the wks file to be used for qemux86.
Also fixes the bitbake parsing issues seen because of memory starvation
using build appliance images.
Fixes [YOCTO #12894]
(From OE-Core rev: 18d6b668c52dc881cff7b107420e0de527eecce4)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Kernel image can be 'vmlinuz' for 'bzImage' but the script is written to
support 'vmlinuz' only. When building with meta-intel on sumo branch, the
kernel image is now bzImage and the installation will fail. Add option to
install bzImage as well.
Signed-off-by: Chong Yi Chai <chong.yi.chai@intel.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Images that rely on dhcp being used won't have network setup properly
otherwise.
Fixes [YOCTO #12804]
(From OE-Core rev: fb4dd04f65ea78890c1102424765056d93e6ca65)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
When building with `clang -target bpf` using the
multilib_header, a recursion was unavoidable because
bits/wordsize.h would #include itself, still lacking
a definition for __MHWORDSIZE or __WORDSIZE.
(From OE-Core rev: 70b41b3c335a80b4ac243f468f22331d261299db)
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Commit 64d3ce83 broke the --extra option.
(From OE-Core rev: cd195bdf5dd2c8ff03c58a63dcabe88b142d2a9c)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Support for variables suffixed with package names, e.g., PKGV_foo, was
removed in commit 3d2c87c4, which broke support for recipes that set
other versions on their packages than what is in ${PV}.
(From OE-Core rev: 38f8284212370999e1e7b0f6559f7cd786e80d1a)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
If a package name exists in runtime-rprovides, lookup-recipe and
package-info would finish after printing information about that
package even if more packages were specified.
(From OE-Core rev: 32c2a2ddb1614f978f511dfccb6cc3e9398df841)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
It's possible that downloading file from updateserver fails. In
this case, we should error out instead of continue.
We have users reporting unexpected behavior of 'devtool sdk-update'.
When an invalid url is supplied, e.g., `devtool sdk-update http://invalid',
the program reports 'Note: Already up-to-date'.
This is obviously not expected. We should error out in such case.
(From OE-Core rev: 449564783dfb162536a2f772b3a8704973221e0f)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Currently we just divide up the free space by the number of partitions
that need to be re-sized. This leads to problems when a user has
explicitly specified a subset of partitions (but not all) that need
to re-sized along with the sizes. As an example, for an image with 3
partitions, if we use:
wic write image.wic /dev/sdb --expand 1:10G
This would lead to paritions 2 and 3 each being re-sized to one thirds
of the free space instead of half.
Change the behavior to use up all the free space.
(From OE-Core rev: a88f1b5d88dbc5fb28be24b9787d73b9e0cdf183)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
The UEFI spec implies that GPT partitions should be assumed to be on a 2048
sector boundary (for a 512 byte sector) and the current logic just
divides the free sectors available by the number of partitions that need
re-sizing, which may or may not align and the final result might
overshoot the limits imposed after alignment.
Since we are expanding already aligned partitions, just divide up the
free space in multiples of 2048. Also use the exec_cmd wrapper instead
of the subprocess call directly.
Fixes [YOCTO #12840]
(From OE-Core rev: 5eef63f5afdfbab8e30748cb1bf42bf2e6524759)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|