| Age | Commit message (Collapse) | Author |
|---|
|
If your BBLAYERS has non-absolute paths in it (e.g.
"${COREBASE}/../something") then none of the paths matched in
copy_recipe_files() with the result that no files got copied and you
ended up with an error later on because the recipe file couldn't be
found at the destination. Fix this as well as adding an explicit check
to see if no files got copied - error out earlier if so.
Fixes [YOCTO #10981].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Patches that we identify as having been "deleted" (i.e. patches in
SRC_URI that no longer appear in the git tree) need to be dropped even
if we're updating in srcrev mode. This fixes the case where HEAD of the
git tree is valid upstream (i.e. no extra commits), but there are
patches left over in the recipe, e.g. when we do devtool upgrade and
then all of the commits rebased on top of the new branch get skipped.
Fixes [YOCTO #11972].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Errors like:
runqemu - ERROR - Acquiring lockfile /tmp/qemu-tap-locks/tap0.lock failed: [Errno 11] Resource temporarily unavailable
are not really fatal errors. Change these to info messages instead
so people look later in the log for the real errors.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
New devtool deploy-target option --strip which enables deploying
stripped binaries, saving some space on target.
* Copies the files of ${D} into a new directory and strips them in place
* Used oe.package.strip_execs for stripping directory
* Added devtool.conf option "strip" for changing default behavior
Config example:
[Deploy]
strip = true
[YOCTO #11227]
Signed-off-by: Tobias Hagelborn <tobiasha@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Got rid of lazy evaluation of self.partitions property.
It's not needed because partitions of the source image should
be always read.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This command writes image to the media or another file with
the possibility to expand partitions to fill free target space.
[YOCTO #11278]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added sfdisk, e2fsck, mkswap, resize2fs, mkdosfs to the
list of used tools in Disk class. They're going to be used
in 'wic write' implementation.
Added dependency to util-linux to wic-tools to ensure that
sfdisk and mkswap are available from wic-tools native sysroot.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This parameter specifies list of supported filesystems.
So far only 'fat' is supported, but 'wic write' is going
to support at least 'fat', 'ext' and 'swap'.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Converted partition number to int in order to use
it as an index in the list of partitions.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Got partition type and sector sizes from the output
of 'parted print'. This info may be used in the implementation
of 'wic write' command.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
So far every used tool have to have separate property and
private attribute in the Disk class. This is too verbose,
considering that there will be much more tools used.
Reimplemented getting tools paths using custom __getattr__
method. This is much more compact and readable.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
OE-Core commit 1df60b09f7a60427795ec828c9c7180e4e52f98c caused a
regression in npm handling since it still expected to be able to get the
results of the license handling, but this no longer happens until after
the npm plugin is called. Thus, call the license handling function
ourselves here (which will record this as having been handled so it
doesn't get done again later).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With "import oe" in create_npm.py you get "AttributeError: module 'oe'
has no attribute 'package'" when it tries to call
oe.package.npm_split_package_dirs().
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The IDE driver in the kernel is fragile and in 4.12 is causing backtraces.
To unblock 4.12 kernel merging use the virtio CD driver instead to mount
iso images which should be faster and more stable.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows the end users to be able to override the entire notes
showing on the shell console. For instance, Our company uses a
external conf-notes.txt, and we run bitbake with some extra variables,
looks like: F=xxx D=xxx M=xxx bitbake <target>, so we want to show
exactly these texts on the shell console, that's why we need this
change.
Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We were being a bit prescriptive in setting LICENSE and
LIC_FILES_CHKSUM. We can't always trust what's in the metadata
accompanying some source which plugins will almost always be pulling
from, however we do want to allow plugins to set the LICENSE and
LIC_FILES_CHKSUM values. Merge what we find in our license file scan
with what the plugin sends back.
Additionally, plugins can now add a "license" item to the handled list
in order to inhibit the normal LICENSE / LIC_FILES_CHKSUM handling if
they have already taken care of it completely.
Thanks to Mark Horn <mark.d.horn@intel.com> for prompting, testing and
fixing this patch.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Previously if we were able to auto-determine the name from the URL, that
took precedence over any name that might be set in extravalues by a
plugin. Some plugins might be able to get a better idea of the name and
thus we should move defaulting of the name further down after the
plugins have had a chance to set it.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Takes a tar archive created by 'devtool export' and imports (untars) it
into the workspace. Currently the whole tar archive is imported, there
is no way to limit what is imported.
https://bugzilla.yoctoproject.org/show_bug.cgi?id=10510
[YOCTO #10510]
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In case the proposed md5sum to be appended to the .devtool_md5 file
is already present, do not append it.
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
By default, exports the whole workspace (all recipes) including the source code.
User can also limit what is exported with --included/--excluded flags. As
a result of this operation, a tar archive containing only workspace metadata
and its corresponding source code is created, which can be properly imported
with 'devtool import'.
https://bugzilla.yoctoproject.org/show_bug.cgi?id=10510
[YOCTO #10510]
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When devtool upgrade is run on a recipe with revision specified
that is not on master branch, and branch isn't set by --srcbranch or -B,
then we should get the correct branch and append the branch to the URL.
If the revision was found on multiple branches, we will display error
to inform user to provide a correct branch and exit.
[YOCTO #11484]
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
During recipe creation, it seems that the automation for replacing
${PV} at the SRCURI for tag, (e.g mbed-tls-${PV}) is causing some
issue due to PV assuming it's a git source. A fix is implemented in
this patch to resolve this issue.
Signed-off-by: Stanley Phoong <stanley.cheong.kwan.phoong@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If a git URL is passed to recipetool create with a tag=, recipetool
should handle it assuming that the tag is valid.
[YOCTO #11393]
Signed-off-by: Stanley Phoong <stanley.cheong.kwan.phoong@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This change is to improve the buildability of the recipe created by
recipetool and devtool.
When recipetool create is run on a git URL and a revision specified
that is not on master, and "branch=" isn't already in the URL, then
we should get the correct branch and append the branch to the URL.
If the revision was found on multiple branches and 'master' is not
in the list, we will display error to inform user to provide a
correct branch and exit.
[YOCTO #11389]
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When creating new recipes, we are almost certainly fetching a new
source rather that something that has already been fetched. I have
disable PREMIRRORS and MIRRORS settings in the recipe that created
by devtool while leaving an option for users to enable them manually
if needed. Since devtool already has this options, we need to ensure
that recipetool is able to handle the options passed from devtool.
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We have two variables here, srcuri and fetchuri. srcuri is what
eventually ends up in the recipe, whereas fetchuri is what we actually
pass to the fetcher when we fetch the source within recipetool -
sometimes these need to be different particularly for an upcoming patch
to handle automatically setting the branch parameter. In OE-Core
revision 9a47a6690052ef943c0d4760630ee630fb012153 I erroneously changed
the call to scriptutils.fetch_url() to pass srcuri instead of fetchuri -
this likely didn't have any ill effect, but change it back to passing
fetchuri to match the original intent.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The author's initial intent was to use a git hook to automatically call
update-server-info, but the wrong hook type was chosen (post-update). A
post-commit one will do the job, hence allowing to drop the explicit call to
update-server-info.
Signed-off-by: Andrea Galbusera <gizero@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Commit 4657bc9d165e51981e034e73e7b92552e873eef7 replaced the git pull logic with
the git fetch + git reset --hard combo, but resetting to HEAD does not really
pull in new commits from remote... Replace with resetting to the upstream branch
instead.
Signed-off-by: Andrea Galbusera <gizero@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* If an error is logged while executing a task, we need to ensure we
exit instead of assuming everything went OK.
* If we receive CookerExit, the server is shutting down and we need to
stop waiting for events and probably exit (knotty does this). This
will occur if an exception or bb.fatal() happens during an event
handler.
This fixes a couple of issues highlighted when using devtool upgrade or
modify on a non-supported recipe with intel-iot-refkit together with
bitbake master, but I'd be very surprised if it were hard to reproduce
in other scenarios.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Although 'test' is listed in the python module list
(https://docs.python.org/3/py-modindex.html) it is meant only to be
used 'internally' by folks developing python itself. Per the
documentation:
Note The test package is meant for internal use by Python only. It
is documented for the benefit of the core developers of Python. Any
use of this package outside of Python’s standard library is
discouraged as code mentioned here can change or be removed without
notice between releases of Python.
Per the above it is best not to include this module to discourage
folks who might not head the above warnings. Additionally this module
is one of the largest py modules going, by dropping this unneeded
module from the 'modules' package we can reduce overall image size,
something which is important for many embedded deployments.
The generator scripts as well as the manifests have thus been modified
accordingly, providing a generic mechanism to exclude modules from the
'all modules' package.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This should reduce the chance of generating 0xffffffff as the disk
system identifier.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The most portable way to specifiy a root device in a disk image that we
create is to use PARTUUID rather than /dev/sda2. As background, both
GPT and MBR tables provide valid UUID values for each partition and the
Linux Kernel contains the logic to parse this value. With this change
we can now boot the default disk images when used as any valid block
device that the included kernel uses. This for example means that
VirtualBox can be used to run vmdk without changes as it uses IDE for
the virtual disk controller.
Cc: Matt Porter <mporter@konsulko.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The vmdk/vdi/qcow2 IMAGE_FSTYPEs predate wic. As such, they provide
some similar underlying functionality in order to produce a "disk" image
that in turn can be converted into different formats that various
hypervisor types work with. They do not however provide the ability for
other disk image types to be converted into these same output types.
Furthermore, they are less flexible than what wic does provide. This
drops the old style vmdk/vdi/qcow2 types and re-introduces them under
the CONVERSION_CMD framework. The equivalent of vmdk is now wic.vmdk
and so forth for the other types.
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Zero may be interpreted as no MBR signature present and another
partitioning program might install a new MBR signature.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
wic avoided adding /boot to fstab for no reason.
This exception was hardcoded in the wic code.
There is no need for this as mountpoint in .wks file is an optional
field. It can be used only if user wants to have partitions
automatically mounted on system boot.
[YOCTO #11662]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Used unique suffix (line number from .wks file) for the
copied rootfs directory to avoid possible conflicts.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
wic gets rootfs paths from partition object property
'rootfs_dir' and shows them in final report.
rootfs plugin sets this property to the temporary path,
which causes temporary paths appearing in the report.
Changed the code to prevent storing temporary rootfs path
in part.rootfs_dir. This should fix the report.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Using relative paths can cause copyhardlinktree API to fail as
it changes current directory when working. Converted all paths
to absolute paths using os.path.realpath.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
wic updates /etc/fstab on root partition if there are
valid mount points in .wks
When wic runs from bitbake this can cause incorrect results
or even breakage of other tasks working with the same rootfs
directory in parallel with do_image_wic.
Implemented copying rootfs directory to a temporary location
using copyhardlinktree before updating fstab to avoid conflicts with
other tasks working with the same rootfs directory.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Multi-users may run qemu on the same host, all of them should be able to
create or remove lock in lockdir, so set lockdir's mode to 0o777.
Note, os.mkdir()'s mode is default to 0o777, but the current umask value is
first masked out, so use os.chmod() to set it.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
Error out ealier if the combos is invalid, e.g.:
$ runqemu tmp/deploy/images/qemux86/bzImage-qemux86.bin tmp/deploy/images/qemux86/core-image-minimal-qemux86.wic
This will fail at kernel panic, no we check and error out early. We can
add other checkings in the future.
[YOCTO #11286]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
Handle them as nfs, so that cmd like the following can be boot:
$ runqemu tmp/deploy/images/qemux86/core-image-minimal-qemux86.tar.bz2
[YOCTO #11286]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
If qbconfload (.qemuboot.conf is found) is present, we can get
DEPLOY_DIR_IMAGE from it rather than "bitbake -e".
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
And move some debug info into logger.debug(), this can make it easy to
read key messages like errors or warnings.
I checked meta/lib/oeqa/ they don't depend on these messages. And I have
run "oe-selftest -a", it doesn't break anything.
[YOCTO #10474]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
Updated help contents with the description of new
wks option --mkfs-extraopts
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This option specifies extra options to pass to mkfs.<fstype> utilities.
[YOCTO #11709]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Since we have provide an option to manually enable PREMIRRORS and MIRRORS
in recipetool, we need to make sure devtool is having the same options
as devtool uses recipetool in creating new recipes.
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
devtool find-recipe will prints out the path to the recipe
in a workspace.
This subcommand can also help to find recipe outside of
current workspace using "-a" or "--any-recipe" option.
This enhancement helps developer to get the recipe path
when working with devtool.
[YOCTO #11434]
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
logger was not defined in scriptutils.py based on the
observation in python traceback.
Traceback (most recent call last):
File "/workdir/poky/scripts/devtool", line 351, in <module>
ret = main()
File "/workdir/poky/scripts/devtool", line 338, in main
ret = args.func(args, config, basepath, workspace)
File "/workdir/poky/scripts/lib/devtool/utilcmds.py", line 55, in
edit_recipe
return scriptutils.run_editor(find_recipe(args, config, basepath,
workspace))
File "/workdir/poky/scripts/lib/scriptutils.py", line 141, in
run_editor
logger.error("Execution of '%s' failed: %s" % (editor, exc))
NameError: name 'logger' is not defined
We pass in logger as parameter to run_editor() from where it has
been called (devtool/utilcmds.py and recipetool/newappend.py),
which both modules already has logger setup.
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
devtool edit-recipe now has ugly tracebacks if executed without an
editor available. This happens in the build containers whenever no
text editor is available.
subprocess.check_call will run text editing command with recipe path
provided. It will wait for command to complete. If the return code
was zero then return, otherwise raise CalledProcessError exception.
This enhancement will suppress the traceback by catching the exception
and prompt the error messages in a proper manner shown below:
pokyuser@59c99c507238:/workdir/docker-dbg$ devtool edit-recipe ifupdown
/bin/sh: 1: vi: not found
ERROR: Execution of 'vi' failed: Command 'vi
"/workdir/docker-dbg/workspace/recipes/ifupdown/ifupdown_0.8.16.bb"'
returned non-zero exit status 127
[YOCTO #11434]
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
Paul Eggleton
Richard Purdie
Tobias Hagelborn
Ed Bartosh
Ming Liu
Leonardo Sandoval
Chang Rebecca Swee Fun
Stanley Phoong
Andrea Galbusera
Mark Asselstine
Jonathan Liu
Tom Rini
Robert Yang