| Age | Commit message (Collapse) | Author |
|---|
|
Previous version of nVidia GLX driver in Ubuntu 10 cause qemu segfault, so we
fall back to Mesa GLX driver if detecting nVidia driver installed. From Ubuntu
11, nVidia GLX driver works well, while previous work around cause GL apps
failure. So this work around is limited in Ubuntu 10 only, and will be removed
in future.
[YOCTO #1886] got fixed.
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add some comments explaining what this script does, fix one grammatical
error in a comment and make the tar-replacement-native comment give the
full reason why it is needed.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
The recent addition of the check to ensure the user was in their build
directory disabled the ability to switch between build directories
without re-running the build environment setup script. We can rely
upon checking for conf/bblayers.conf instead, so use this check.
This does allow BUILDDIR (which is normally set by the environment
script) to be unset; however if it is set then it is assumed to be the
correct build directory and will be used in the error message that is
shown when we can't find conf/bblayers.conf.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
If pseudodone doesn't exist, we can get STAGING_BINDIR_NATIVE by calling
bitbake -e and use that as the path to check for pseudo before we give
up and try to build it explicitly first.
This is useful for people who share TMPDIR between multiple build
directories.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Fix a few problems and enhance its functions, it shoud be more useful
than before.
* Search in meta and meta-* for archs, and grep AVAILTUNES for archs,
(only search meta, and grep DEFAULTTUNE before), add the host arch.
and also can search in extra layers with --extra-layer.
* Reduce the analyzing time when remove duplicated files. It would cost
more than 10 minutes to analyze 11,000 files before, now only needs
about 50 seconds.
* Check the access time rather than create time.
* Need the user's confirm before really remove the file, or use --yes to
assume yes.
* Add --stamps-dir to keep sstate files which are used by the build
directory, and remove others this can make the sstate cache dir clean,
it is faster and should be useful than the --remove-duplicated.
* Add --verbose to explain what is being done.
* Add "-d" which is short for --remove-duplicated
[YOCTO #2198]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When passing the nograhic option to the runqemu script, set
console=ttyS0 in the kernel options so the user can view
the kernel boot messages.
This fixes [YOCTO #1475]
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Attempt to detect when pseudo-native has been updated. If it has been updated,
or if the user is attempting an operation with pseudo-native in the name, force
a build of pseudo-native, prior to running the main build.
Note: This causes a build, then clean in the case of
bitbake -c cleansstate pseudo-native
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If you install the top-level python package only on a minimal
system which has no other python packages installed then python
is not functional at all. Without any extra packages installed
this error is seen:
# python
Traceback (most recent call last):
File "/usr/lib/python2.7/site.py", line 64, in <module>
import traceback
ImportError: No module named traceback
Installing python-lang only partly fixes the problem as this
error still exists:
# python
Traceback (most recent call last):
File "/usr/lib/python2.7/site.py", line 569, in <module>
main()
File "/usr/lib/python2.7/site.py", line 551, in main
known_paths = addusersitepackages(known_paths)
File "/usr/lib/python2.7/site.py", line 278, in addusersitepackages
user_site = getusersitepackages()
File "/usr/lib/python2.7/site.py", line 253, in getusersitepackages
user_base = getuserbase() # this will also set USER_BASE
File "/usr/lib/python2.7/site.py", line 243, in getuserbase
USER_BASE = get_config_var('userbase')
File "/usr/lib/python2.7/sysconfig.py", line 520, in get_config_var
return get_config_vars().get(name)
File "/usr/lib/python2.7/sysconfig.py", line 400, in get_config_vars
import re
ImportError: No module named re
Signed-off-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Typoes fixed: "enviroment", "editted", "spliting", "scheulder".
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When qemu build failed, we can see such messages:
You need libGL.so and libGLU.so to exist in your library path and the
development headers for SDL installed to build qemu-native.
Ubuntu package names are: libgl1-mesa-dev, libglu1-mesa-dev and
libsdl1.2-dev
These pkgs have different names on Fedora distributions, and Fedora is
one the
main linux distributions, so add Fedora package names.
The following Fedora versions have these pkgs:
Fedora 9 64bit
Fedora 13 32bit
Fedora 13 64bit
Fedora 16 64bit
[YOCTO #2174]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A few recent commits in the OE-Core repository contain diffs in their
commit messages, which totally confuses git-am when applying them to the
combo repository during update. Add some code to detect and indent any
diff text in the commit message so that this does not happen (and show a
warning).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If one or more components are specified for update, only check if their
repository/repositories are dirty rather than checking all of the
configured repositories.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO #1806]
Standard practice is to use the Linux "dd" command to write images to boot
media. This can be error prone and the results of sloppy usage can be
disastrous. Locating the device you want to use is a clumsy process, especially
on a headless build system.
The ddimage script does the following:
o Check the image and device exist
o Check the device is writable
o Compare the device to a blacklist and abort if it's listed
Blacklist defaults to "/dev/sda"
o Display useful identifying information about the image and device
o Prompt the user before commencing the write
The output looks something like this:
$ sudo ~/bin/ddimage tmp/deploy/images/core-image-sato-fri2-noemgd.hddimg /dev/sdk
Image details
=============
image: `tmp/deploy/images/core-image-sato-fri2-noemgd.hddimg' -> `core-image-sato-fri2-noemgd-20111202214038.hddimg'
size: 318568448 bytes
modified: 2011-12-02 13:45:05.298897861 -0800
type: x86 boot sector, code offset 0x58, OEM-ID "SYSLINUX", sectors/cluster 16, root entries 512, Media descriptor 0xf8, sectors/FAT 152, heads 64, hidden sectors 32, sectors 622204 (volumes > 32 MB) , serial number 0x4ed946e0, label: "boot ", FAT (16 bit)
Device details
==============
device: /dev/sdk
vendor: Kingston
model: DT 101 G2
Write tmp/deploy/images/core-image-sato-fri2-noemgd.hddimg to /dev/sdk [y/N]? y
Writing image...
303+1 records in
303+1 records out
318568448 bytes (319 MB) copied, 53.6766 s, 5.9 MB/s
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Dexuan Cui <dexuan.cui@intel.com>
CC: Joshua Lock <josh@linux.intel.com>
CC: Kishore K Bodke <kishore.k.bodke@intel.com>
|
|
Previously this had its own implementation of splitting a list of
packages with optional version e.g. "libncurses-dev (>= 5.9)"; switch to
using the already existing bitbake function which does this as it is
much better tested.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[Yocto 1561]
Add script cleanup-workdir to clean up WORKDIR. It checks every
package build directories under WORKDIR then parse the directory
name to get package name and version. If the version is not the
package prefer version then delete the directory.
Signed-off-by: Kang Kai <kai.kang@windriver.com>
|
|
If the user is in any directory other than $BUILDDIR when the bitbake
wrapper script is run, then show an error an exit.
Fixes [YOCTO #2071].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If our own proxy command isn't available for some reason and nc is available,
fall back to use it.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If oe-git-proxy-socks isn't available, try and create it.
If that fails, tell the user there is a problem, don't just fail
to find the command.
[YOCTO #2007]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adepted to the new bitbake cache mechanism which is based on file
content but not on file timp stamps any more.
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Change the scripts to launch the new Hob.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There would be many obsolete cache files in the SSTATE_DIR after several
builds, this script can remove the obsolete one for a pkg, only leave
the up to date one.
Here is the help text:
sstate-cache-management.sh <OPTION>
Options:
--help, -h
Display this help and exit.
--cache-dir=<sstate cache dir>
Specify sstate cache directory, will use the environment
variable SSTATE_CACHE_DIR if it is not specified.
--remove-duplicated
Remove the duplicated sstate cache files of one package, only
the newest one would be kept.
[YOCTO #1682]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
If you specify one or more components to update immediately following
the "update" command, only these components will be updated as opposed
to the default behaviour of updating all of them.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Minor improvements to the example combo-layer config file:
* Add the recently added branch option to the optional options section
* Mention in comments that last_revision gets updated during "update"
* Tidy up some more grammar
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If we are running an update and the last revision hasn't changed since
the last update, don't write to the configuration file. This avoids
committing the config file with no changes other than spontaneous
reordering of sections, which sometimes occurs due to the behaviour of
the internal dictionary in Python's ConfigParser class. (This can be
fixed properly but the fix is only easy in Python 2.7+ due to the
availability there of the collections.OrderedDict class, and we
currently want to be compatible with 2.6.x as well.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Avoid displaying the error from the "git status" command we use to check
the status of the config file if the config file is outside of the
repository (a situation that is already handled).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If you specify -D or -v options to the bitbake wrapper script, and the
initial pseudo build needs to be done, it's useful to pass these
options through to that command so that you can debug the initial
pseudo build as well.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Raise the check for max RAM supported for QEMU/arm
its 256M since we patched it to be so in OE
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
COMMERCIAL_LICENSE no longer exists; the equivalent functionality is
now has been replaced by LICENSE_FLAGS_WHITELIST, so replace the
COMMERCIAL_LICENSE warning with a similarly equivalent warning.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
A recent set of changes changed the kernel name from bzImage to vmlinux,
this test needs to change also.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Two issues are fixed with this commit, the ability to use the keyboard
on a graphical qemu boot and enabling ethernet by default on a 3.0
kernel.
The keyboard is fixed via the same method as the other simulations with
the addition of console=tty on the qemu command line.
Ethernet is fixed by adding a dependency of PCNET32 to the qemuppc
configuration, which allows us to build ethernet directly into the image.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
From 11.10, libGL.so is installed @ /usr/lib/x86_64-linux-gnu/ in 64b Ubuntu.
[YOCTO #1885] got fixed
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
|
|
With this new emulation, existing qemuppc functionality is maintained
and other functionality such as framebuffer + sato and NFS boot are
added.
Signed-off-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
[YOCTO #1556]
- Modified meta/class/package.bbclass and prserv.bbclass according to
the change in PR service by adding PACKAGE_ARCH into the query tuple.
- Added prexport.bbclass, primport.bbclass to export/import AUTOPR
values from/to PRService.
- Move PR service related common code to lib/oe/prservice.py.
- Supported reading the AUTOPR values from the exported .inc file
instead of reading it from remote PR service.
- Created a new script bitbake-prserv-tool to export/import the AUTOPR
values from/to the PR service.
Typical usage scenario of the export/import is:
1. bitbake-prserv-tool export <file> to export the AUTOPR values from
the current PR service into an exported .inc file.
2. Others may use that exported .inc file(to be included in the
local.conf) to lockdown and reproduce the same AUTOPR when generating
package feeds.
3. Others may "bitbake-prserv-tool import <file>" to import the AUTOPR
values into their own PR service and the AUTOPR values will be
incremented from there.
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
|
|
Adds a buildhistory-diff script which can be used to analyse changes in
the buildhistory git repository (as produced by buildhistory.bbclass),
and report significant ones that may need manual checking to ensure they
aren't regressions (e.g. package size changed by more than a certain
percentage, files added/removed/changed in the image, etc.)
The implementation is actually split into a small script and a Python
module, in order to make the logic re-usable in a future web-based
interface.
Implements the first part of [YOCTO #1566].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
In the rpm2cpio.sh script, the output of $COMPRESSION is tested for
certain lowercase strings such as 'xz' in order to determine the
decompression to use. The problem is that the output strings tested
are from the output of 'file', which uses different cases in different
versions e.g. file-5.09 prints:
tmp/sysroots/x86_64-linux/usr/bin$ ./file xxx.tar.xz: XZ compressed data
while file-5.03 prints:
tmp/sysroots/x86_64-linux/usr/bin$ ./file xxx.tar.xz: xz compressed data
In the former, the XZ string causes xz compressed payloads to
incorrectly fall through to the catch-all lzma case.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Unfortunately we now have code in BitBake which is parsed before the
current version check and is incompatible with Python < 2.6. Rather than
fixing this and being eternally vigilant for >= 2.6 feature usage, just
add a version check to the wrapper script.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
If /dev/net/tun is either not present or is not writable by the
user, then show an appropriate error message. (QEMU needs access to this
device in order to enable networking; it may be missing if it is not
enabled or loaded into the kernel, and some distributions such as CentOS
5.x set restrictive permissions upon it.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
s/No cover letter will be send./No cover letter will be sent./
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Without this the command will add a route for the subnet 192.168.7.0 which
means multiple qemu instances can't operate correctly since all but the last
one will be masked out.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
We can't just look for *image* since it will catch up bzimage
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Current sanitytest use option -e for ps command, which only works for ps
from procps. It fails if ps is provided by busybox. Add check to use different
option for command from busybox and procps.
[YOCTO #1756]
Signed-off-by: Jiajun Xu <jiajun.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is the result of running the following over the metadata:
sed \
-e 's:bb.data.\(setVar([^,()]*,[^,()]*\), *\([^ )]*\) *):\2.\1):g' \
-e 's:bb.data.\(setVarFlag([^,()]*,[^,()]*,[^,()]*\), *\([^) ]*\) *):\2.\1):g' \
-e 's:bb.data.\(getVar([^,()]*\), *\([^(), ]*\) *,\([^)]*\)):\2.\1,\3):g' \
-e 's:bb.data.\(getVarFlag([^,()]*,[^,()]*\), *\([^(), ]*\) *,\([^)]*\)):\2.\1,\3):g' \
-e 's:bb.data.\(getVarFlag([^,()]*,[^,()]*\), *\([^() ]*\) *):\2.\1):g' \
-e 's:bb.data.\(getVar([^,()]*\), *\([^) ]*\) *):\2.\1):g' \
-i `grep -ril bb.data *`
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* move 2to3 to separate package and include lib2to3 (was in python-misc)
* fix pattern for python-unittest (was in python-misc because it's in subdirectory now)
* add pydoc_data to python-pydoc (was in python-misc)
* add more stuff to smtpd, audio, codecs, ctypes, html, io, json, mime,
pickle, stringold, xmlrpc
* move all FILES_ details from python recipe to manifest generator so it's in one place
* added manual line break in FILES_${PN}-core, because git send-email
doesn't like too long lines
$ git send-email -1 dfaae65839f0ab23e5b2ae2a68df0f370bca84d2
fatal: /tmp/k8zbDajUNP/0001-python-improve-packaging.patch: 64: patch contains a line longer than 998 characters
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
If a commit is empty (for example, commits brought over from svn where
only properties were changed) then attempting to apply it with "git am"
will result in the error "Patch format detection failed", so skip it
instead.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Fix some grammar.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
If the config file is tracked within the combo-layer repository and it
is updated at the end of the "update" operation (because last_revision
has been changed), then automatically commit the file. This ensures that
multiple people can perform updates on different machines without the
last revision information going missing.
(If the file is outside the repository or is masked via .gitignore, this
will do nothing.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
Zhai Edwin
Paul Eggleton
Robert Yang
Scott Garman
Mark Hatle
Gary Thomas
Robert P. J. Day
Darren Hart
Yi Zhao
Kang Kai
Richard Purdie
Lianhao Lu
Dongxiao Xu
Khem Raj
Tom Zanussi
Saul Wold
Bruce Ashfield
Liming Wang
Otavio Salvador
Jiajun Xu
Martin Jansa