| Age | Commit message (Collapse) | Author |
|---|
|
If a postinst has a problem (say, qemu crashes) and set -e isn't in operation,
the only mention of the problem is a single line in the rootfs log that doesn't
trigger any warnings.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
I found these when I was looking at libftdi and they seem to be
generic enough to show up in at least a couple of other packages so I
figure I'll add them.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add support for extracting dependencies from CMakeLists.txt. There's
still a bunch of things missing that are outside the scope of OE-Core
and we still lack a proper extension mechanism, but this is a good
start.
This also adds an oe-selftest test to exercise the new code a bit.
Implements [YOCTO #7635].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We want to specify dependencies on virtual/* rather than whatever
library is selected in the current configuration.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some refactoring to allow access to the library/header/pkg-config
mappings and the DEPENDS / unmapped dependency output code from other
classes than AutotoolsRecipeHandler.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The regex for detecting git URLs was unanchored, leading to it matching
where it shouldn't have. An example of where this went wrong was
http://taglib.github.io/releases/taglib-1.9.1.tar.gz.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Support a number of macros from autoconf-archive when reading
configure.ac to extract dependencies.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There are a few different macros that can be used to pick up these
tools, add support for them all.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The presence of BOOST_REQUIRE or AX_BOOST.* indicates that boost is a
dependency.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* The regexes for PKG_CHECK_MODULES / AC_CHECK_LIB were a bit too strict
and thus we were skipping some macros.
* Add support for PKG_CHECK_EXISTS
* Avoid duplicates in warning on missing pkg-config dependencies
* Ignore dependency on musl (since this may come up if it's the selected
C library)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
kickstarter.py was not the best name for this module as previously
there was a directory with the same name in scripts/lib/wic/.
All files were removed from it, but .pyc files could still stay there
causing imports from wic.kickstart to fail with
ImportError: cannot import name KickStart.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Overriden error method to throw exception instead of
printing usage error message. Exception is caught by
KickStart code to add .ks file name and line number.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Removed imports of wic.kickstart from plugins as they're
not used in the code.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Caught argparse.ArgumentError
Included .ks file name and line number into the error messages.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Catch parsing errors and output them using msger.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This exception will be raised by kickstart parser
on parsing errors and processed in the code which
calls parser to produce meaningful error output.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Without one of the --ondrive, --ondisk or --use-uuid options for a
partition with a mountpoint specified the automatically generated
fstab entry will be invalid.
[YOCTO #8844]
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Used partitions and configfile bootloader attributes instead of
using getters get_bootloader_file and get_partitions.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Used size and source_file attributes instead of using
setters. It's more pythonic, clear an consistent.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Got rid of get_rootfs and set_rootfs java-like getter and
setter. Renamed rootfs to rootfs_dir to be consistent with
the name of kickstart parameter --rootfs-dir.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Used bootloader.timeout instead of kickstart.get_timeout getter.
Accessing attributes instead of getting them with getters is
more pythonic, shorter and readable. It also more consistent as
most of partition and bootloader attributes are used this way.
This change also takes care of appendLine bootloader attribute:
it's renamed to bootloader.append attribute provided by new parser.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
New data structure is less nested than old one.
Adjusted bootloader and partitions fields:
self.ks.handler.bootloader -> self.ks.bootoader
self.ks.handler.partitions -> self.ks.partitions
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Removed pykickstart-related code as it's replaced by
new kickstart parser.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Used KickStart parser class instead of pykickstart API.
This commit breaks wic as data structures and field names
provided by new API are a bit different from old ones.
This issue will be addressed in the following commits.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This module will replace existing pykickstart machinery
it contains only option used by wic, it's simple and
clear. And It will allow to remove a lot of old complex
code from 3rdparty/pykickstart/ and kickstart/custom_commands.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Copied partition-related API from kickstart/custom_commands/partition.py
to separate module in preparation for removal of all
pykickstart related code.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
By default fc-cache will scan both system and user directories, which means it
attempts to scan $HOME/.fonts. As this is the build host's idea of $HOME this
generally doesn't exist, and causes fc-cache to exit with a failure.
Solve this by passing --system-only so that fc-cache will only scan system
directories, as is appropriate for a rootfs-time invocation.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* at least with git 2.6.3 I see git request-pull failing
when there is only :{BRANCH} as ending commit
* $ git request-pull origin/dizzy git://git.openembedded.org/openembedded-core-contrib jansa/dizzy-backports:jansa/dizzy-backports
The following changes since commit 7bb182bdd130266100fc541fd09b82d09c51cd80:
build-appliance-image: Update to dizzy head revision (2015-09-29 14:56:04 +0100)
...
And finds correct 7 changes there
* $ git request-pull origin/dizzy git://git.openembedded.org/openembedded-core-contrib :jansa/dizzy-backports
warn: No match for commit 6068d1c90336ddc1fb32856efd1d9ccf07733896 found at git://git.openembedded.org/openembedded-core-contrib
warn: Are you sure you pushed 'jansa/dizzy-backports' there?
The following changes since commit 97756472d3a69eaca95d105494ffea78c6b077e0:
build-appliance-image: Update to dizzy head revision (2014-10-18 16:16:27 +0200)
...
and lists all commits in _current_ branch since origin/dizzy, then it refuses
to continue, because there are too many changes.
* 6068d1c90336ddc1fb32856efd1d9ccf07733896 is this commit in jansa/master-submitted
branch so it really shouldn't be included in pull request from jansa/dizzy branch.
* git help says:
<end>
Commit to end at (defaults to HEAD). This names the commit at the tip of the history you are asking to be pulled.
When the repository named by <url> has the commit at a tip of a ref that is different from the ref you have locally, you can use
the <local>:<remote> syntax, to have its local name, a colon :, and its remote name.
* maybe the syntax got changes since git 2.1.0 when Saul added :${BRANCH}
* I haven't found how to respect ${COMMIT_ID in the new syntax
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
workarounds
Rather than horrible workarounds, use the new --setscene-only option
of bitbake to pre-populate the SDK structures.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It's logical that you would want to build BBCLASSEXTENDed items
separately through devtool build, so simply allow that - we're just
passing the name verbatim to bitbake, so all it means is adjusting the
validation.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the recipe file itself was created in the workspace, and it uses
BBCLASSEXTEND (e.g. through devtool add --also-native), then we need to
clean the other variants as well.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We're doing this in a couple of places, let's just find the recipe file
if it exists within the workspace (which it will if it's been added
through "devtool add") when we read in the workspace.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Sometimes you need to build a variant of a recipe for the build
host as well as for the target (i.e. BBCLASSEXTEND = "native"); add a
--also-native command line option to "recipetool create" that enables
this and plumb it through from an identical option for "devtool add".
(We could conceivably do the same for nativesdk, but I felt it might be
confusing within the context of the extensible SDK, where nativesdk
isn't really relevant to the user.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We need to run the clean for all recipes that are being reset before we
start deleting things from the workspace; if we don't, recipes providing
dependencies may be missing when we come to clean a recipe later (since
we don't and couldn't practically reset them in dependency order). This
also improves performance since we have the startup startup time for the
clean just once rather than for every recipe.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the recipe name ends with -native then we should inherit native;
likewise if it starts with nativesdk- then inherit nativesdk.
(Note that the recipe name must actually be specified by the user in
order to trigger this - we won't do it based on any name auto-detected
from e.g. the tarball name.)
Since we're doing this based on the name, "devtool add" will also gain
this functionality automatically.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As a matter of general convention we expect recipe names to be lower
case; in fact some of the packaging backends insist upon it. Since in
this part of the code we're auto-determining the name, we should convert
the name to lowercase if it's not already so that we're following
convention and avoiding any validation issues later on.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For debugging purposes it's useful to be able to skip the preparation
step so you can inspect what the state of the build system is first.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Running "raise" with no arguments here is invalid, we're not in
exception handling context. Rather than also adding code to catch the
exception I just moved the check out to the parent function from which
we can just exit.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Clone the correct path - we need .git on the end
* Pull from the specified path instead of expecting a remote to be set
* up in the repo already (it isn't by default)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We read the updateserver setting from the config file but we never
actually used that value - the code then went on to use only the value
supplied on the command line.
Fix courtesy of Dmitry Rozhkov <dmitry.rozhkov@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We need to call git update-server-info here on the created repository or
we can't share it over plain http as we need to be able to for the
update process to function as currently implemented.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Hooking up a serial console is a "developer mode", the chances are pretty good
developers are interested in watching the kernel boot log on the console so
they can spot any problems or diagnose any failed boots (e.g. can't find root
fs).
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Regardless of which image is built using which layers, try to ensure the image
on the SD device being prepared is the one that is booted automatically when
the board is powered.
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* add more php5 entries
* add builder user (from builder.bb)
* add .bashrc and .profile in HOME directory of created user
* add imgdata directory generated by image.py
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add an option for random MACHINE into oe-selftest:
--machine [random/all]
1. random: will set a random MACHINE for each test
2. all: will run tests for all machines
Custom machine sets only weak default values (??=) for MACHINE in machine.inc.
This let test cases that require a specific MACHINE to be able to
override it, using (?= or =).
e.g.:
oe-selftest --run-tests signing --machine random -->
will run all tests switching MACHINE randomly for each test
oe-selftest --run-tests signing --machine all -->
for each machine will run all tests
oe-selftest --run-all-tests --machine random
Also update oeqa/selftest/base.py to accomodate this feature.
Fix for [YOCTO #5880].
Signed-off-by: Daniel Istrate <daniel.alexandrux.istrate@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This option will list all available tests in a comprehensive manner.
Fix for [YOCTO #8868]
Signed-off-by: Daniel Istrate <daniel.alexandrux.istrate@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
--list-classes does a weak validation when determining test names:
(if method.startswith("test_") which could report any class attribute
that starts with 'test_' as a valid test case.
This fix checks that the class attribute that starts with 'test_'
is also callable (is a method).
Fix for [YOCTO #8862]
Signed-off-by: Daniel Istrate <daniel.alexandrux.istrate@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Coverage data tracking initiates too early, causing coverage data from the
oe-selftest environment setting to be added to each run. Even when no tests are run
oe-selftest reports around 24% of coverage due to this extra data.
Change the custom resultclass used by the TextTestRunner to one generated from the
command arguments. The generated class processes coverage when needed, running
coverage setup just before the first testcase is run and reporting after the last
one finished.
[Yocto #8846]
Signed-off-by: Humberto Ibarra <humberto.ibarra.lopez@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When a file is given using --sourceparams then wic directly use that file
instead of copying them to build folder. At time of assembling it os.rename
is called which renames all the files to name. In that process the original
file is renamed. When image recipe is rebuilt then wic complains about
missing file which was renamed in previous build.
[YOCTO #8854]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Copied layers with 'cp -a' instead of calling shutil.copytree as
copytree fails to copy broken symlinks.
More pythonic fix would be to use copytree with 'ignore' parameter,
but this could slow down copying complex directory structures.
[YOCTO #8825]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
Ross Burton
Paul Eggleton
Ed Bartosh
Joshua Lock
Martin Jansa
Richard Purdie
Trevor Woerner
Daniel Istrate
Humberto Ibarra
Noor Ahsan